From a0652fc9a28c3ef8cd59264bfcb089c44d1b0e06 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 15:03:03 +1100 Subject: powerpc: Unify the 32 and 64 bit idle loops This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle loops. It brings over the concept of having a ppc_md.power_save function from 32-bit to ARCH=powerpc, which lets us get rid of native_idle(). With this we will also be able to simplify the idle handling for pSeries and cell. Signed-off-by: Paul Mackerras --- arch/ppc/kernel/Makefile | 4 +- arch/ppc/kernel/entry.S | 8 +- arch/ppc/kernel/idle.c | 112 -------------------- arch/ppc/kernel/idle_6xx.S | 233 ------------------------------------------ arch/ppc/kernel/idle_power4.S | 91 ----------------- 5 files changed, 7 insertions(+), 441 deletions(-) delete mode 100644 arch/ppc/kernel/idle.c delete mode 100644 arch/ppc/kernel/idle_6xx.S delete mode 100644 arch/ppc/kernel/idle_power4.S (limited to 'arch/ppc/kernel') diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e399bbb969a4..1b2c7458a3d0 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -8,10 +8,9 @@ extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o -extra-$(CONFIG_6xx) += idle_6xx.o extra-y += vmlinux.lds -obj-y := entry.o traps.o idle.o time.o misc.o \ +obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -35,7 +34,6 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 3a2815978488..fa8d49789ef1 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c deleted file mode 100644 index 1be3ca5bae40..000000000000 --- a/arch/ppc/kernel/idle.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked - * on by Tom Rini, Armin Kuster, Paul Mackerras and others. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void default_idle(void) -{ - void (*powersave)(void); - - powersave = ppc_md.power_save; - - if (!need_resched()) { - if (powersave != NULL) - powersave(); -#ifdef CONFIG_SMP - else { - set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && - !cpu_is_offline(smp_processor_id())) - barrier(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } -#endif - } -} - -/* - * The body of the idle task. - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - for (;;) { - while (!need_resched()) { - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); - } - - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) -/* - * Register the sysctl to set/clear powersave_nap. - */ -extern int powersave_nap; - -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} - -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S deleted file mode 100644 index 1a2194cf6828..000000000000 --- a/arch/ppc/kernel/idle_6xx.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * Make sure no rest of NAP mode remains in HID0, save default - * values for some CPU specific registers. Called with r24 - * containing CPU number and r3 reloc offset - */ -_GLOBAL(init_idle_6xx) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID0 - rlwinm r4,r4,0,10,8 /* Clear NAP */ - mtspr SPRN_HID0, r4 - b 1f -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - blr -1: - slwi r5,r24,2 - add r5,r5,r3 -BEGIN_FTR_SECTION - mfspr r4,SPRN_MSSCR0 - addis r6,r5, nap_save_msscr0@ha - stw r4,nap_save_msscr0@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID1 - addis r6,r5,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ -_GLOBAL(ppc6xx_idle) - /* Check if we can nap or doze, put HID0 mask in r3 - */ - lis r3, 0 -BEGIN_FTR_SECTION - lis r3,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beq 1f - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beq 1f - lis r3,HID0_NAP@h -1: -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - cmpwi 0,r3,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Some pre-nap cleanups needed on some CPUs */ - andis. r0,r3,HID0_NAP@h - beq 2f -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif -2: -BEGIN_FTR_SECTION - /* Go to low speed mode on some 750FX */ - lis r4,powersave_lowspeed@ha - lwz r4,powersave_lowspeed@l(r4) - cmpwi 0,r4,0 - beq 1f - mfspr r4,SPRN_HID1 - oris r4,r4,0x0001 - mtspr SPRN_HID1,r4 -1: -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - - /* Go to NAP or DOZE now */ - mfspr r4,SPRN_HID0 - lis r5,(HID0_NAP|HID0_SLEEP)@h -BEGIN_FTR_SECTION - oris r5,r5,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - andc r4,r4,r5 - or r4,r4,r3 -BEGIN_FTR_SECTION - oris r4,r4,HID0_DPM@h /* that should be done once for all */ -END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM) - mtspr SPRN_HID0,r4 -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - -/* - * Return from NAP/DOZE mode, restore some CPU specific registers, - * we are called with DR/IR still off and r2 containing physical - * address of current. - */ -_GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 - -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) - slwi r11,r11,2 - /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once - */ -BEGIN_FTR_SECTION - beq cr1,1f - addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha - lwz r9,nap_save_msscr0@l(r9) - mtspr SPRN_MSSCR0, r9 - sync - isync -1: -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - addis r9,r11,(nap_save_hid1-KERNELBASE)@ha - lwz r9,nap_save_hid1@l(r9) - mtspr SPRN_HID1, r9 -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - b transfer_to_handler_cont - - .data - -_GLOBAL(nap_save_msscr0) - .space 4*NR_CPUS - -_GLOBAL(nap_save_hid1) - .space 4*NR_CPUS - -_GLOBAL(powersave_nap) - .long 0 -_GLOBAL(powersave_lowspeed) - .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S deleted file mode 100644 index cc0d535365cd..000000000000 --- a/arch/ppc/kernel/idle_power4.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * So nothing for now. Called with r24 containing CPU number and r3 - * reloc offset - */ - .globl init_idle_power4 -init_idle_power4: - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ - .globl power4_idle -power4_idle: -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Go to NAP now */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - - .globl powersave_nap -powersave_nap: - .long 0 -- cgit v1.2.3