From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/4xx_io/Makefile | 6 + arch/ppc/4xx_io/serial_sicc.c | 2012 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 2018 insertions(+) create mode 100644 arch/ppc/4xx_io/Makefile create mode 100644 arch/ppc/4xx_io/serial_sicc.c (limited to 'arch/ppc/4xx_io') diff --git a/arch/ppc/4xx_io/Makefile b/arch/ppc/4xx_io/Makefile new file mode 100644 index 000000000000..6a8cd575f382 --- /dev/null +++ b/arch/ppc/4xx_io/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux MPC4xx ppc-specific parts +# + + +obj-$(CONFIG_SERIAL_SICC) += serial_sicc.o diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c new file mode 100644 index 000000000000..e95c48d57571 --- /dev/null +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -0,0 +1,2012 @@ +/* + * arch/ppc/4xx_io/serial_sicc.c + * + * Driver for IBM STB3xxx SICC serial port + * + * Based on drivers/char/serial_amba.c, by ARM Ltd. + * + * Copyright 2001 IBM Crop. + * Author: IBM China Research Lab + * Yudong Yang + * Yi Ge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * This is a driver for SICC serial port on IBM Redwood 4 evaluation board. + * The driver support both as a console device and normal serial device and + * is compatible with normal ttyS* devices. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +#include + + +/* ----------------------------------------------------------------------------- + * From STB03xxx SICC UART Specification + * ----------------------------------------------------------------------------- + * UART Register Offsets. + */ + +#define BL_SICC_LSR 0x0000000 /* line status register read/clear */ +#define BL_SICC_LSRS 0x0000001 /* set line status register read/set */ +#define BL_SICC_HSR 0x0000002 /* handshake status register r/clear */ +#define BL_SICC_HSRS 0x0000003 /* set handshake status register r/set */ +#define BL_SICC_BRDH 0x0000004 /* baudrate divisor high reg r/w */ +#define BL_SICC_BRDL 0x0000005 /* baudrate divisor low reg r/w */ +#define BL_SICC_LCR 0x0000006 /* control register r/w */ +#define BL_SICC_RCR 0x0000007 /* receiver command register r/w */ +#define BL_SICC_TxCR 0x0000008 /* transmitter command register r/w */ +#define BL_SICC_RBR 0x0000009 /* receive buffer r */ +#define BL_SICC_TBR 0x0000009 /* transmit buffer w */ +#define BL_SICC_CTL2 0x000000A /* added for Vesta */ +#define BL_SICC_IrCR 0x000000B /* added for Vesta IR */ + +/* masks and definitions for serial port control register */ + +#define _LCR_LM_MASK 0xc0 /* loop back modes */ +#define _LCR_DTR_MASK 0x20 /* data terminal ready 0-inactive */ +#define _LCR_RTS_MASK 0x10 /* request to send 0-inactive */ +#define _LCR_DB_MASK 0x08 /* data bits mask */ +#define _LCR_PE_MASK 0x04 /* parity enable */ +#define _LCR_PTY_MASK 0x02 /* parity */ +#define _LCR_SB_MASK 0x01 /* stop bit mask */ + +#define _LCR_LM_NORM 0x00 /* normal operation */ +#define _LCR_LM_LOOP 0x40 /* internal loopback mode */ +#define _LCR_LM_ECHO 0x80 /* automatic echo mode */ +#define _LCR_LM_RES 0xc0 /* reserved */ + +#define _LCR_DTR_ACTIVE _LCR_DTR_MASK /* DTR is active */ +#define _LCR_RTS_ACTIVE _LCR_RTS_MASK /* RTS is active */ +#define _LCR_DB_8_BITS _LCR_DB_MASK /* 8 data bits */ +#define _LCR_DB_7_BITS 0x00 /* 7 data bits */ +#define _LCR_PE_ENABLE _LCR_PE_MASK /* parity enabled */ +#define _LCR_PE_DISABLE 0x00 /* parity disabled */ +#define _LCR_PTY_EVEN 0x00 /* even parity */ +#define _LCR_PTY_ODD _LCR_PTY_MASK /* odd parity */ +#define _LCR_SB_1_BIT 0x00 /* one stop bit */ +#define _LCR_SB_2_BIT _LCR_SB_MASK /* two stop bit */ + +/* serial port handshake register */ + +#define _HSR_DIS_MASK 0x80 /* DSR input inactive error mask */ +#define _HSR_CS_MASK 0x40 /* CTS input inactive error mask */ +#define _HSR_DIS_ACT 0x00 /* dsr input is active */ +#define _HSR_DIS_INACT _HSR_DIS_MASK /* dsr input is inactive */ +#define _HSR_CS_ACT 0x00 /* cts input is active */ +#define _HSR_CS_INACT _HSR_CS_MASK /* cts input is active */ + +/* serial port line status register */ + +#define _LSR_RBR_MASK 0x80 /* receive buffer ready mask */ +#define _LSR_FE_MASK 0x40 /* framing error */ +#define _LSR_OE_MASK 0x20 /* overrun error */ +#define _LSR_PE_MASK 0x10 /* parity error */ +#define _LSR_LB_MASK 0x08 /* line break */ +#define _LSR_TBR_MASK 0x04 /* transmit buffer ready */ +#define _LSR_TSR_MASK 0x02 /* transmit shift register ready */ + +#define _LSR_RBR_FULL _LSR_RBR_MASK /* receive buffer is full */ +#define _LSR_FE_ERROR _LSR_FE_MASK /* framing error detected */ +#define _LSR_OE_ERROR _LSR_OE_MASK /* overrun error detected */ +#define _LSR_PE_ERROR _LSR_PE_MASK /* parity error detected */ +#define _LSR_LB_BREAK _LSR_LB_MASK /* line break detected */ +#define _LSR_TBR_EMPTY _LSR_TBR_MASK /* transmit buffer is ready */ +#define _LSR_TSR_EMPTY _LSR_TSR_MASK /* transmit shift register is empty */ +#define _LSR_TX_ALL 0x06 /* all physical transmit is done */ + +#define _LSR_RX_ERR (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \ + _LSR_PE_MASK ) + +/* serial port receiver command register */ + +#define _RCR_ER_MASK 0x80 /* enable receiver mask */ +#define _RCR_DME_MASK 0x60 /* dma mode */ +#define _RCR_EIE_MASK 0x10 /* error interrupt enable mask */ +#define _RCR_PME_MASK 0x08 /* pause mode mask */ + +#define _RCR_ER_ENABLE _RCR_ER_MASK /* receiver enabled */ +#define _RCR_DME_DISABLE 0x00 /* dma disabled */ +#define _RCR_DME_RXRDY 0x20 /* dma disabled, RxRDY interrupt enabled*/ +#define _RCR_DME_ENABLE2 0x40 /* dma enabled,receiver src channel 2 */ +#define _RCR_DME_ENABLE3 0x60 /* dma enabled,receiver src channel 3 */ +#define _RCR_PME_HARD _RCR_PME_MASK /* RTS controlled by hardware */ +#define _RCR_PME_SOFT 0x00 /* RTS controlled by software */ + +/* serial port transmit command register */ + +#define _TxCR_ET_MASK 0x80 /* transmiter enable mask */ +#define _TxCR_DME_MASK 0x60 /* dma mode mask */ +#define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */ +#define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */ +#define _TxCR_SPE_MASK 0x04 /* stop/pause mask */ +#define _TxCR_TB_MASK 0x02 /* transmit break mask */ + +#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmiter enabled */ +#define _TxCR_DME_DISABLE 0x00 /* transmiter disabled, TBR intr disabled */ +#define _TxCR_DME_TBR 0x20 /* transmiter disabled, TBR intr enabled */ +#define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */ +#define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */ + +/* serial ctl reg 2 - added for Vesta */ + +#define _CTL2_EXTERN 0x80 /* */ +#define _CTL2_USEFIFO 0x40 /* */ +#define _CTL2_RESETRF 0x08 /* */ +#define _CTL2_RESETTF 0x04 /* */ + + + +#define SERIAL_SICC_NAME "ttySICC" +#define SERIAL_SICC_MAJOR 150 +#define SERIAL_SICC_MINOR 1 +#define SERIAL_SICC_NR 1 + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +/* + * Things needed by tty driver + */ +static struct tty_driver *siccnormal_driver; + +#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +/* + * Things needed internally to this driver + */ + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the copy_from_user blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static u_char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 +#define SICC_ISR_PASS_LIMIT 256 + +#define EVT_WRITE_WAKEUP 0 + +struct SICC_icount { + __u32 cts; + __u32 dsr; + __u32 rng; + __u32 dcd; + __u32 rx; + __u32 tx; + __u32 frame; + __u32 overrun; + __u32 parity; + __u32 brk; + __u32 buf_overrun; +}; + +/* + * Static information about the port + */ +struct SICC_port { + unsigned int uart_base; + unsigned int uart_base_phys; + unsigned int irqrx; + unsigned int irqtx; + unsigned int uartclk; + unsigned int fifosize; + unsigned int tiocm_support; + void (*set_mctrl)(struct SICC_port *, u_int mctrl); +}; + +/* + * This is the state information which is persistent across opens + */ +struct SICC_state { + struct SICC_icount icount; + unsigned int line; + unsigned int close_delay; + unsigned int closing_wait; + unsigned int custom_divisor; + unsigned int flags; + int count; + struct SICC_info *info; + spinlock_t sicc_lock; +}; + +#define SICC_XMIT_SIZE 1024 +/* + * This is the state information which is only valid when the port is open. + */ +struct SICC_info { + struct SICC_port *port; + struct SICC_state *state; + struct tty_struct *tty; + unsigned char x_char; + unsigned char old_status; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + struct circ_buf xmit; + unsigned int flags; +#ifdef SUPPORT_SYSRQ + unsigned long sysrq; +#endif + + unsigned int event; + unsigned int timeout; + unsigned int lcr_h; + unsigned int mctrl; + int blocked_open; + + struct tasklet_struct tlet; + + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + wait_queue_head_t delta_msr_wait; +}; + +#ifdef CONFIG_SERIAL_SICC_CONSOLE +static struct console siccuart_cons; +#endif +static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios); +static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout); + + + +static void powerpcMtcic_cr(unsigned long value) +{ + mtdcr(DCRN_CICCR, value); +} + +static unsigned long powerpcMfcic_cr(void) +{ + return mfdcr(DCRN_CICCR); +} + +static unsigned long powerpcMfclkgpcr(void) +{ + return mfdcr(DCRN_SCCR); +} + +static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl) +{ +} + +static struct SICC_port sicc_ports[SERIAL_SICC_NR] = { + { + .uart_base = 0, + .uart_base_phys = SICC0_IO_BASE, + .irqrx = SICC0_INTRX, + .irqtx = SICC0_INTTX, +// .uartclk = 0, + .fifosize = 1, + .set_mctrl = sicc_set_mctrl_null, + } +}; + +static struct SICC_state sicc_state[SERIAL_SICC_NR]; + +static void siccuart_enable_rx_interrupt(struct SICC_info *info) +{ + unsigned char cr; + + cr = readb(info->port->uart_base+BL_SICC_RCR); + cr &= ~_RCR_DME_MASK; + cr |= _RCR_DME_RXRDY; + writeb(cr, info->port->uart_base+BL_SICC_RCR); +} + +static void siccuart_disable_rx_interrupt(struct SICC_info *info) +{ + unsigned char cr; + + cr = readb(info->port->uart_base+BL_SICC_RCR); + cr &= ~_RCR_DME_MASK; + cr |= _RCR_DME_DISABLE; + writeb(cr, info->port->uart_base+BL_SICC_RCR); +} + + +static void siccuart_enable_tx_interrupt(struct SICC_info *info) +{ + unsigned char cr; + + cr = readb(info->port->uart_base+BL_SICC_TxCR); + cr &= ~_TxCR_DME_MASK; + cr |= _TxCR_DME_TBR; + writeb(cr, info->port->uart_base+BL_SICC_TxCR); +} + +static void siccuart_disable_tx_interrupt(struct SICC_info *info) +{ + unsigned char cr; + + cr = readb(info->port->uart_base+BL_SICC_TxCR); + cr &= ~_TxCR_DME_MASK; + cr |= _TxCR_DME_DISABLE; + writeb(cr, info->port->uart_base+BL_SICC_TxCR); +} + + +static void siccuart_stop(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + /* disable interrupts while stopping serial port interrupts */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + siccuart_disable_tx_interrupt(info); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + +static void siccuart_start(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + /* disable interrupts while starting serial port interrupts */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + if (info->xmit.head != info->xmit.tail + && info->xmit.buf) + siccuart_enable_tx_interrupt(info); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static void siccuart_event(struct SICC_info *info, int event) +{ + info->event |= 1 << event; + tasklet_schedule(&info->tlet); +} + +static void +siccuart_rx_chars(struct SICC_info *info, struct pt_regs *regs) +{ + struct tty_struct *tty = info->tty; + unsigned int status, ch, rsr, flg, ignored = 0; + struct SICC_icount *icount = &info->state->icount; + struct SICC_port *port = info->port; + + status = readb(port->uart_base+BL_SICC_LSR ); + while (status & _LSR_RBR_FULL) { + ch = readb(port->uart_base+BL_SICC_RBR); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + icount->rx++; + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readb(port->uart_base+BL_SICC_LSR); + if (rsr & _LSR_RX_ERR) + goto handle_error; +#ifdef SUPPORT_SYSRQ + if (info->sysrq) { + if (ch && time_before(jiffies, info->sysrq)) { + handle_sysrq(ch, regs, NULL); + info->sysrq = 0; + goto ignore_char; + } + info->sysrq = 0; + } +#endif + error_return: + *tty->flip.flag_buf_ptr++ = flg; + *tty->flip.char_buf_ptr++ = ch; + tty->flip.count++; + ignore_char: + status = readb(port->uart_base+BL_SICC_LSR ); + } +out: + tty_flip_buffer_push(tty); + return; + +handle_error: + if (rsr & _LSR_LB_BREAK) { + rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK); + icount->brk++; + +#ifdef SUPPORT_SYSRQ + if (info->state->line == siccuart_cons.index) { + if (!info->sysrq) { + info->sysrq = jiffies + HZ*5; + goto ignore_char; + } + } +#endif + } else if (rsr & _LSR_PE_MASK) + icount->parity++; + else if (rsr & _LSR_FE_MASK) + icount->frame++; + if (rsr & _LSR_OE_MASK) + icount->overrun++; + + if (rsr & info->ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + rsr &= info->read_status_mask; + + if (rsr & _LSR_LB_BREAK) + flg = TTY_BREAK; + else if (rsr & _LSR_PE_MASK) + flg = TTY_PARITY; + else if (rsr & _LSR_FE_MASK) + flg = TTY_FRAME; + + if (rsr & _LSR_OE_MASK) { + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + *tty->flip.flag_buf_ptr++ = flg; + *tty->flip.char_buf_ptr++ = ch; + tty->flip.count++; + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef SUPPORT_SYSRQ + info->sysrq = 0; +#endif + goto error_return; +} + +static void siccuart_tx_chars(struct SICC_info *info) +{ + struct SICC_port *port = info->port; + int count; + unsigned char status; + + + if (info->x_char) { + writeb(info->x_char, port->uart_base+ BL_SICC_TBR); + info->state->icount.tx++; + info->x_char = 0; + return; + } + if (info->xmit.head == info->xmit.tail + || info->tty->stopped + || info->tty->hw_stopped) { + siccuart_disable_tx_interrupt(info); + writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR); + return; + } + + count = port->fifosize; + do { + writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR); + info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1); + info->state->icount.tx++; + if (info->xmit.head == info->xmit.tail) + break; + } while (--count > 0); + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SICC_XMIT_SIZE) < WAKEUP_CHARS) + siccuart_event(info, EVT_WRITE_WAKEUP); + + if (info->xmit.head == info->xmit.tail) { + siccuart_disable_tx_interrupt(info); + } +} + + +static irqreturn_t siccuart_int_rx(int irq, void *dev_id, struct pt_regs *regs) +{ + struct SICC_info *info = dev_id; + siccuart_rx_chars(info, regs); + return IRQ_HANDLED; +} + + +static irqreturn_t siccuart_int_tx(int irq, void *dev_id, struct pt_regs *regs) +{ + struct SICC_info *info = dev_id; + siccuart_tx_chars(info); + return IRQ_HANDLED; +} + +static void siccuart_tasklet_action(unsigned long data) +{ + struct SICC_info *info = (struct SICC_info *)data; + struct tty_struct *tty; + + tty = info->tty; + if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event)) + return; + + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); + wake_up_interruptible(&tty->write_wait); +} + +static int siccuart_startup(struct SICC_info *info) +{ + unsigned long flags; + unsigned long page; + int retval = 0; + + if (info->flags & ASYNC_INITIALIZED) { + return 0; + } + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + if (info->port->uart_base == 0) + info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE); + if (info->port->uart_base == 0) { + free_page(page); + return -ENOMEM; + } + + /* lock access to info while doing setup */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + + if (info->xmit.buf) + free_page(page); + else + info->xmit.buf = (unsigned char *) page; + + + info->mctrl = 0; + if (info->tty->termios->c_cflag & CBAUD) + info->mctrl = TIOCM_RTS | TIOCM_DTR; + info->port->set_mctrl(info->port, info->mctrl); + + /* + * initialise the old status of the modem signals + */ + info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY; + + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit.head = info->xmit.tail = 0; + + /* + * Set up the tty->alt_speed kludge + */ + if (info->tty) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + + + writeb( 0x00, info->port->uart_base + BL_SICC_IrCR ); // disable IrDA + + + /* + * and set the speed of the serial port + */ + siccuart_change_speed(info, 0); + + // enable rx/tx ports + writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR); + writeb(_TxCR_ET_ENABLE , info->port->uart_base + BL_SICC_TxCR); + + readb(info->port->uart_base + BL_SICC_RBR); // clear rx port + + writeb(0xf8, info->port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */ + + /* + * Finally, enable interrupts + */ + + /* + * Allocate the IRQ + */ + retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info); + if (retval) { + if (capable(CAP_SYS_ADMIN)) { + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + retval = 0; + } + goto errout; + } + retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info); + if (retval) { + if (capable(CAP_SYS_ADMIN)) { + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + retval = 0; + } + free_irq(info->port->irqrx, info); + goto errout; + } + + siccuart_enable_rx_interrupt(info); + + info->flags |= ASYNC_INITIALIZED; + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + return 0; + + +errout: + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void siccuart_shutdown(struct SICC_info *info) +{ + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + /* lock while shutting down port */ + spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */ + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be woken up + */ + wake_up_interruptible(&info->delta_msr_wait); + + /* + * disable all interrupts, disable the port + */ + siccuart_disable_rx_interrupt(info); + siccuart_disable_tx_interrupt(info); + + /* + * Free the IRQ + */ + free_irq(info->port->irqtx, info); + free_irq(info->port->irqrx, info); + + if (info->xmit.buf) { + unsigned long pg = (unsigned long) info->xmit.buf; + info->xmit.buf = NULL; + free_page(pg); + } + + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS); + info->port->set_mctrl(info->port, info->mctrl); + + /* kill off our tasklet */ + tasklet_kill(&info->tlet); + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + + +static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios) +{ + unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits; + unsigned long flags; + + if (!info->tty || !info->tty->termios) + return; + + cflag = info->tty->termios->c_cflag; + + pr_debug("siccuart_set_cflag(0x%x) called\n", cflag); + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS7: lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9; break; + default: lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8 + } + if (cflag & CSTOPB) { + lcr_h |= _LCR_SB_2_BIT; + bits ++; + } + if (cflag & PARENB) { + lcr_h |= _LCR_PE_ENABLE; + bits++; + if (!(cflag & PARODD)) + lcr_h |= _LCR_PTY_ODD; + else + lcr_h |= _LCR_PTY_EVEN; + } + + do { + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(info->tty); + if (!baud) + baud = 9600; + + + { + // here is ppc403SetBaud(com_port, baud); + unsigned long divisor, clockSource, temp; + + /* Ensure CICCR[7] is 0 to select Internal Baud Clock */ + powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF)); + + /* Determine Internal Baud Clock Frequency */ + /* powerpcMfclkgpcr() reads DCR 0x120 - the*/ + /* SCCR (Serial Clock Control Register) on Vesta */ + temp = powerpcMfclkgpcr(); + + if(temp & 0x00000080) { + clockSource = 324000000; + } + else { + clockSource = 216000000; + } + clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18); + divisor = clockSource/(16*baud) - 1; + /* divisor has only 12 bits of resolution */ + if(divisor>0x00000FFF){ + divisor=0x00000FFF; + } + + quot = divisor; + } + + if (baud == 38400 && + ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + quot = info->state->custom_divisor; + + if (!quot && old_termios) { + info->tty->termios->c_cflag &= ~CBAUD; + info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + old_termios = NULL; + } + } while (quot == 0 && old_termios); + + /* As a last resort, if the quotient is zero, default to 9600 bps */ + if (!quot) + quot = (info->port->uartclk / (16 * 9600)) - 1; + + info->timeout = info->port->fifosize * HZ * bits / baud; + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /* + * Set up parity check flag + */ +#define RELEVENT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + info->read_status_mask = _LSR_OE_MASK; + if (I_INPCK(info->tty)) + info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= _LSR_LB_MASK; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= _LSR_LB_MASK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= _LSR_OE_MASK; + } + + /* disable interrupts while reading and clearing registers */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + + old_rcr = readb(info->port->uart_base + BL_SICC_RCR); + old_tcr = readb(info->port->uart_base + BL_SICC_TxCR); + + + writeb(0, info->port->uart_base + BL_SICC_RCR); + writeb(0, info->port->uart_base + BL_SICC_TxCR); + + /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/ + + + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + + + /* Set baud rate */ + writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH ); + writeb( quot & 0x00000FF, info->port->uart_base + BL_SICC_BRDL ); + + /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */ + /* For now, do NOT use FIFOs since 403 UART did not have this */ + /* capability and this driver was inherited from 403UART. */ + writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2); + + writeb(lcr_h, info->port->uart_base + BL_SICC_LCR); + + writeb(old_rcr, info->port->uart_base + BL_SICC_RCR); // restore rcr + writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr + +} + + +static void siccuart_put_char(struct tty_struct *tty, u_char ch) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + if (!tty || !info->xmit.buf) + return; + + /* lock info->xmit while adding character to tx buffer */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) { + info->xmit.buf[info->xmit.head] = ch; + info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + +static void siccuart_flush_chars(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + if (info->xmit.head == info->xmit.tail + || tty->stopped + || tty->hw_stopped + || !info->xmit.buf) + return; + + /* disable interrupts while transmitting characters */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + siccuart_enable_tx_interrupt(info); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + +static int siccuart_write(struct tty_struct *tty, + const u_char * buf, int count) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + int c, ret = 0; + + if (!tty || !info->xmit.buf || !tmp_buf) + return 0; + + /* lock info->xmit while removing characters from buffer */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + while (1) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SICC_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = (info->xmit.head + c) & + (SICC_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + if (info->xmit.head != info->xmit.tail + && !tty->stopped + && !tty->hw_stopped) + siccuart_enable_tx_interrupt(info); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + return ret; +} + +static int siccuart_write_room(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE); +} + +static int siccuart_chars_in_buffer(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE); +} + +static void siccuart_flush_buffer(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + pr_debug("siccuart_flush_buffer(%d) called\n", tty->index); + /* lock info->xmit while zeroing buffer counts */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + info->xmit.head = info->xmit.tail = 0; + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + wake_up_interruptible(&tty->write_wait); + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void siccuart_send_xchar(struct tty_struct *tty, char ch) +{ + struct SICC_info *info = tty->driver_data; + + info->x_char = ch; + if (ch) + siccuart_enable_tx_interrupt(info); +} + +static void siccuart_throttle(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + + if (I_IXOFF(tty)) + siccuart_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) { + /* disable interrupts while setting modem control lines */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + info->mctrl &= ~TIOCM_RTS; + info->port->set_mctrl(info->port, info->mctrl); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + } +} + +static void siccuart_unthrottle(struct tty_struct *tty) +{ + struct SICC_info *info = (struct SICC_info *) tty->driver_data; + unsigned long flags; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + siccuart_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + /* disable interrupts while setting modem control lines */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + info->mctrl |= TIOCM_RTS; + info->port->set_mctrl(info->port, info->mctrl); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + } +} + +static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo) +{ + struct SICC_state *state = info->state; + struct SICC_port *port = info->port; + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = 0; + tmp.line = state->line; + tmp.port = port->uart_base; + if (HIGH_BITS_OFFSET) + tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET; + tmp.irq = port->irqrx; + tmp.flags = 0; + tmp.xmit_fifo_size = port->fifosize; + tmp.baud_base = port->uartclk / 16; + tmp.close_delay = state->close_delay; + tmp.closing_wait = state->closing_wait; + tmp.custom_divisor = state->custom_divisor; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int set_serial_info(struct SICC_info *info, + struct serial_struct *newinfo) +{ + struct serial_struct new_serial; + struct SICC_state *state, old_state; + struct SICC_port *port; + unsigned long new_port; + unsigned int i, change_irq, change_port; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + state = info->state; + old_state = *state; + port = info->port; + + new_port = new_serial.port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + + change_irq = new_serial.irq != port->irqrx; + change_port = new_port != port->uart_base; + + if (!capable(CAP_SYS_ADMIN)) { + if (change_irq || change_port || + (new_serial.baud_base != port->uartclk / 16) || + (new_serial.close_delay != state->close_delay) || + (new_serial.xmit_fifo_size != port->fifosize) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (state->flags & ~ASYNC_USR_MASK))) + return -EPERM; + state->flags = ((state->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + state->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) || + (new_serial.baud_base < 9600)) + return -EINVAL; + + if (new_serial.type && change_port) { + for (i = 0; i < SERIAL_SICC_NR; i++) + if ((port != sicc_ports + i) && + sicc_ports[i].uart_base != new_port) + return -EADDRINUSE; + } + + if ((change_port || change_irq) && (state->count > 1)) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + port->uartclk = new_serial.baud_base * 16; + state->flags = ((state->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | + (info->flags & ASYNC_INTERNAL_FLAGS)); + state->custom_divisor = new_serial.custom_divisor; + state->close_delay = new_serial.close_delay * HZ / 100; + state->closing_wait = new_serial.closing_wait * HZ / 100; + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->fifosize = new_serial.xmit_fifo_size; + + if (change_port || change_irq) { + /* + * We need to shutdown the serial port at the old + * port/irq combination. + */ + siccuart_shutdown(info); + port->irqrx = new_serial.irq; + port->uart_base = new_port; + } + +check_and_exit: + if (!port->uart_base) + return 0; + if (info->flags & ASYNC_INITIALIZED) { + if ((old_state.flags & ASYNC_SPD_MASK) != + (state->flags & ASYNC_SPD_MASK) || + (old_state.custom_divisor != state->custom_divisor)) { + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + siccuart_change_speed(info, NULL); + } + } else + retval = siccuart_startup(info); + return retval; +} + + +/* + * get_lsr_info - get line status register info + */ +static int get_lsr_info(struct SICC_info *info, unsigned int *value) +{ + unsigned int result, status; + unsigned long flags; + + /* disable interrupts while reading status from port */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + status = readb(info->port->uart_base + BL_SICC_LSR); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0; + + /* + * If we're about to load something into the transmit + * register, we'll pretend the transmitter isn't empty to + * avoid a race condition (depending on when the transmit + * interrupt happens). + */ + if (info->x_char || + ((CIRC_CNT(info->xmit.head, info->xmit.tail, + SICC_XMIT_SIZE) > 0) && + !info->tty->stopped && !info->tty->hw_stopped)) + result &= TIOCSER_TEMT; + + return put_user(result, value); +} + +static int get_modem_info(struct SICC_info *info, unsigned int *value) +{ + unsigned int result = info->mctrl; + + return put_user(result, value); +} + +static int set_modem_info(struct SICC_info *info, unsigned int cmd, + unsigned int *value) +{ + unsigned int arg, old; + unsigned long flags; + + if (get_user(arg, value)) + return -EFAULT; + + old = info->mctrl; + switch (cmd) { + case TIOCMBIS: + info->mctrl |= arg; + break; + + case TIOCMBIC: + info->mctrl &= ~arg; + break; + + case TIOCMSET: + info->mctrl = arg; + break; + + default: + return -EINVAL; + } + /* disable interrupts while setting modem control lines */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + if (old != info->mctrl) + info->port->set_mctrl(info->port, info->mctrl); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + return 0; +} + +static void siccuart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + unsigned int lcr_h; + + + /* disable interrupts while setting break state */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + lcr_h = readb(info->port + BL_SICC_LSR); + if (break_state == -1) + lcr_h |= _LSR_LB_MASK; + else + lcr_h &= ~_LSR_LB_MASK; + writeb(lcr_h, info->port + BL_SICC_LSRS); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); +} + +static int siccuart_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct SICC_info *info = tty->driver_data; + struct SICC_icount cnow; + struct serial_icounter_struct icount; + unsigned long flags; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCMGET: + return get_modem_info(info, (unsigned int *)arg); + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + return set_modem_info(info, cmd, (unsigned int *)arg); + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *)arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *)arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *)arg); + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + return 0; + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + /* disable interrupts while getting interrupt count */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + cnow = info->state->icount; + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + return copy_to_user((void *)arg, &icount, sizeof(icount)) + ? -EFAULT : 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct SICC_info *info = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios->c_cflag; + + if ((cflag ^ old_termios->c_cflag) == 0 && + RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) + return; + + siccuart_change_speed(info, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(cflag & CBAUD)) { + /* disable interrupts while setting break state */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR); + info->port->set_mctrl(info->port, info->mctrl); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (cflag & CBAUD)) { + /* disable interrupts while setting break state */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + info->mctrl |= TIOCM_DTR; + if (!(cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + info->mctrl |= TIOCM_RTS; + info->port->set_mctrl(info->port, info->mctrl); + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(cflag & CRTSCTS)) { + tty->hw_stopped = 0; + siccuart_start(tty); + } + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} + +static void siccuart_close(struct tty_struct *tty, struct file *filp) +{ + struct SICC_info *info = tty->driver_data; + struct SICC_state *state; + unsigned long flags; + + if (!info) + return; + + state = info->state; + + //pr_debug("siccuart_close() called\n"); + + /* lock tty->driver_data while closing port */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + + if (tty_hung_up_p(filp)) { + goto quick_close; + } + + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count); + state->count = 0; + } + if (state->count) { + goto quick_close; + } + info->flags |= ASYNC_CLOSING; + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->state->closing_wait); + /* + * At this point, we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + if (info->flags & ASYNC_INITIALIZED) { + siccuart_disable_rx_interrupt(info); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + siccuart_wait_until_sent(tty, info->timeout); + } + siccuart_shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + if (tty->ldisc.flush_buffer) + tty->ldisc.flush_buffer(tty); + tty->closing = 0; + info->event = 0; + info->tty = NULL; + if (info->blocked_open) { + if (info->state->close_delay) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(info->state->close_delay); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + return; + +quick_close: + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + return; +} + +static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct SICC_info *info = (struct SICC_info *) tty->driver_data; + unsigned long char_time, expire; + + if (info->port->fifosize == 0) + return; + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ/50) / info->port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + + // Crazy!! sometimes the input arg 'timeout' can be negtive numbers :-( + if (timeout >= 0 && timeout < char_time) + char_time = timeout; + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; + + expire = jiffies + timeout; + pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n", + tty->index, jiffies, + expire, char_time); + while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(char_time); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, expire)) + break; + } + set_current_state(TASK_RUNNING); +} + +static void siccuart_hangup(struct tty_struct *tty) +{ + struct SICC_info *info = tty->driver_data; + struct SICC_state *state = info->state; + + siccuart_flush_buffer(tty); + if (info->flags & ASYNC_CLOSING) + return; + siccuart_shutdown(info); + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct SICC_info *info) +{ + DECLARE_WAITQUEUE(wait, current); + struct SICC_state *state = info->state; + unsigned long flags; + int do_clocal = 0, extra_count = 0, retval; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + return (info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, state->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + /* lock while decrementing state->count */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + if (!tty_hung_up_p(filp)) { + extra_count = 1; + state->count--; + } + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + info->blocked_open++; + while (1) { + /* disable interrupts while setting modem control lines */ + spin_lock_irqsave(&info->state->sicc_lock,flags); + if (tty->termios->c_cflag & CBAUD) { + info->mctrl = TIOCM_DTR | TIOCM_RTS; + info->port->set_mctrl(info->port, info->mctrl); + } + spin_unlock_irqrestore(&info->state->sicc_lock,flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/)) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (extra_count) + state->count++; + info->blocked_open--; + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static struct SICC_info *siccuart_get(int line) +{ + struct SICC_info *info; + struct SICC_state *state = sicc_state + line; + + state->count++; + if (state->info) + return state->info; + info = kmalloc(sizeof(struct SICC_info), GFP_KERNEL); + if (info) { + memset(info, 0, sizeof(struct SICC_info)); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->delta_msr_wait); + info->flags = state->flags; + info->state = state; + info->port = sicc_ports + line; + tasklet_init(&info->tlet, siccuart_tasklet_action, + (unsigned long)info); + } + if (state->info) { + kfree(info); + return state->info; + } + state->info = info; + return info; +} + +static int siccuart_open(struct tty_struct *tty, struct file *filp) +{ + struct SICC_info *info; + int retval, line = tty->index; + + + // is this a line that we've got? + if (line >= SERIAL_SICC_NR) { + return -ENODEV; + } + + info = siccuart_get(line); + if (!info) + return -ENOMEM; + + tty->driver_data = info; + info->tty = tty; + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + /* + * Make sure we have the temporary buffer allocated + */ + if (!tmp_buf) { + unsigned long page = get_zeroed_page(GFP_KERNEL); + if (tmp_buf) + free_page(page); + else if (!page) { + return -ENOMEM; + } + tmp_buf = (u_char *)page; + } + + /* + * If the port is in the middle of closing, bail out now. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + return -EAGAIN; + } + + /* + * Start up the serial port + */ + retval = siccuart_startup(info); + if (retval) { + return retval; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + return retval; + } + +#ifdef CONFIG_SERIAL_SICC_CONSOLE + if (siccuart_cons.cflag && siccuart_cons.index == line) { + tty->termios->c_cflag = siccuart_cons.cflag; + siccuart_cons.cflag = 0; + siccuart_change_speed(info, NULL); + } +#endif + return 0; +} + +static struct tty_operations sicc_ops = { + .open = siccuart_open, + .close = siccuart_close, + .write = siccuart_write, + .put_char = siccuart_put_char, + .flush_chars = siccuart_flush_chars, + .write_room = siccuart_write_room, + .chars_in_buffer = siccuart_chars_in_buffer, + .flush_buffer = siccuart_flush_buffer, + .ioctl = siccuart_ioctl, + .throttle = siccuart_throttle, + .unthrottle = siccuart_unthrottle, + .send_xchar = siccuart_send_xchar, + .set_termios = siccuart_set_termios, + .stop = siccuart_stop, + .start = siccuart_start, + .hangup = siccuart_hangup, + .break_ctl = siccuart_break_ctl, + .wait_until_sent = siccuart_wait_until_sent, +}; + +int __init siccuart_init(void) +{ + int i; + siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR); + if (!siccnormal_driver) + return -ENOMEM; + printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n"); + siccnormal_driver->driver_name = "serial_sicc"; + siccnormal_driver->owner = THIS_MODULE; + siccnormal_driver->name = SERIAL_SICC_NAME; + siccnormal_driver->major = SERIAL_SICC_MAJOR; + siccnormal_driver->minor_start = SERIAL_SICC_MINOR; + siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL; + siccnormal_driver->subtype = SERIAL_TYPE_NORMAL; + siccnormal_driver->init_termios = tty_std_termios; + siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + tty_set_operations(siccnormal_driver, &sicc_ops); + + if (tty_register_driver(siccnormal_driver)) + panic("Couldn't register SICC serial driver\n"); + + for (i = 0; i < SERIAL_SICC_NR; i++) { + struct SICC_state *state = sicc_state + i; + state->line = i; + state->close_delay = 5 * HZ / 10; + state->closing_wait = 30 * HZ; + spin_lock_init(&state->sicc_lock); + } + + + return 0; +} + +__initcall(siccuart_init); + +#ifdef CONFIG_SERIAL_SICC_CONSOLE +/************** console driver *****************/ + +/* + * This code is currently never used; console->read is never called. + * Therefore, although we have an implementation, we don't use it. + * FIXME: the "const char *s" should be fixed to "char *s" some day. + * (when the definition in include/linux/console.h is also fixed) + */ +#ifdef used_and_not_const_char_pointer +static int siccuart_console_read(struct console *co, const char *s, u_int count) +{ + struct SICC_port *port = &sicc_ports[co->index]; + unsigned int status; + char *w; + int c; + + pr_debug("siccuart_console_read() called\n"); + + c = 0; + w = s; + while (c < count) { + if(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL) { + *w++ = readb(port->uart_base + BL_SICC_RBR); + c++; + } else { + // nothing more to get, return + return c; + } + } + // return the count + return c; +} +#endif + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void siccuart_console_write(struct console *co, const char *s, u_int count) +{ + struct SICC_port *port = &sicc_ports[co->index]; + unsigned int old_cr; + int i; + + /* + * First save the CR then disable the interrupts + */ + old_cr = readb(port->uart_base + BL_SICC_TxCR); + writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base + BL_SICC_TxCR); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); + writeb(s[i], port->uart_base + BL_SICC_TBR); + if (s[i] == '\n') { + while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); + writeb('\r', port->uart_base + BL_SICC_TBR); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); + writeb(old_cr, port->uart_base + BL_SICC_TxCR); +} + +/* + * Receive character from the serial port + */ +static int siccuart_console_wait_key(struct console *co) +{ + struct SICC_port *port = &sicc_ports[co->index]; + int c; + + while(!(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL)); + c = readb(port->uart_base + BL_SICC_RBR); + return c; +} + +static struct tty_driver *siccuart_console_device(struct console *c, int *index) +{ + *index = c->index; + return siccnormal_driver; +} + +static int __init siccuart_console_setup(struct console *co, char *options) +{ + struct SICC_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + u_int cflag = CREAD | HUPCL | CLOCAL; + u_int lcr_h, quot; + + + if (co->index >= SERIAL_SICC_NR) + co->index = 0; + + port = &sicc_ports[co->index]; + + if (port->uart_base == 0) + port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE); + + if (options) { + char *s = options; + baud = simple_strtoul(s, NULL, 10); + while (*s >= '0' && *s <= '9') + s++; + if (*s) parity = *s++; + if (*s) bits = *s - '0'; + } + + /* + * Now construct a cflag setting. + */ + switch (baud) { + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + default: cflag |= B9600; baud = 9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + case 57600: cflag |= B57600; break; + case 115200: cflag |= B115200; break; + } + switch (bits) { + case 7: cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; break; + default: cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; break; + } + switch (parity) { + case 'o': + case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD; break; + case 'e': + case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE | _LCR_PTY_ODD; break; + } + + co->cflag = cflag; + + + { + // a copy of is inserted here ppc403SetBaud(com_port, (int)9600); + unsigned long divisor, clockSource, temp; + unsigned int rate = baud; + + /* Ensure CICCR[7] is 0 to select Internal Baud Clock */ + powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF)); + + /* Determine Internal Baud Clock Frequency */ + /* powerpcMfclkgpcr() reads DCR 0x120 - the*/ + /* SCCR (Serial Clock Control Register) on Vesta */ + temp = powerpcMfclkgpcr(); + + if(temp & 0x00000080) { + clockSource = 324000000; + } + else { + clockSource = 216000000; + } + clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18); + divisor = clockSource/(16*rate) - 1; + /* divisor has only 12 bits of resolution */ + if(divisor>0x00000FFF){ + divisor=0x00000FFF; + } + + quot = divisor; + } + + writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH ); + writeb( quot & 0x00000FF, port->uart_base + BL_SICC_BRDL ); + + /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */ + /* For now, do NOT use FIFOs since 403 UART did not have this */ + /* capability and this driver was inherited from 403UART. */ + writeb(_CTL2_EXTERN, port->uart_base + BL_SICC_CTL2); + + writeb(lcr_h, port->uart_base + BL_SICC_LCR); + writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR); + writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR); + + // writeb(, info->port->uart_base + BL_SICC_RCR ); + /* + * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt + * + Transmitter Empty interrupt + Transmitter error interrupt disabled & + * Stop mode when CTS active enabled & Transmit Break + Pattern Generation + * mode disabled. + */ + + writeb( 0x00, port->uart_base + BL_SICC_IrCR ); // disable IrDA + + readb(port->uart_base + BL_SICC_RBR); + + writeb(0xf8, port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */ + + /* we will enable the port as we need it */ + + return 0; +} + +static struct console siccuart_cons = +{ + .name = SERIAL_SICC_NAME, + .write = siccuart_console_write, +#ifdef used_and_not_const_char_pointer + .read = siccuart_console_read, +#endif + .device = siccuart_console_device, + .wait_key = siccuart_console_wait_key, + .setup = siccuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +void __init sicc_console_init(void) +{ + register_console(&siccuart_cons); +} + +#endif /* CONFIG_SERIAL_SICC_CONSOLE */ -- cgit v1.2.3