From 9e77dab68496f68ccc50f47638c79f24106f0546 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 27 Aug 2013 09:57:52 +0200 Subject: microblaze: Remove selfmodified feature This was experimental feature which has never been widely used because it expects GCC behaviour. Also remove INTC_BASE and TIMER_BASE macros. Signed-off-by: Michal Simek --- arch/microblaze/kernel/Makefile | 2 - arch/microblaze/kernel/intc.c | 36 ++++-------------- arch/microblaze/kernel/selfmod.c | 81 ---------------------------------------- arch/microblaze/kernel/setup.c | 4 -- arch/microblaze/kernel/timer.c | 47 ++++++++--------------- 5 files changed, 24 insertions(+), 146 deletions(-) delete mode 100644 arch/microblaze/kernel/selfmod.c (limited to 'arch/microblaze/kernel') diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 928c950fc14c..5b0e512c78e5 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -7,7 +7,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_selfmod.o = -pg CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg @@ -23,7 +22,6 @@ obj-y += dma.o exceptions.o \ obj-y += cpu/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SELFMOD) += selfmod.o obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index d85fa3a2b0f8..f618b5351f59 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -18,13 +18,7 @@ #include #include -#ifdef CONFIG_SELFMOD_INTC -#include -#define INTC_BASE BARRIER_BASE_ADDR -#else static unsigned int intc_baseaddr; -#define INTC_BASE intc_baseaddr -#endif /* No one else should require these constants, so define them locally here. */ #define ISR 0x00 /* Interrupt Status Register */ @@ -50,21 +44,21 @@ static void intc_enable_or_unmask(struct irq_data *d) * acks the irq before calling the interrupt handler */ if (irqd_is_level_type(d)) - out_be32(INTC_BASE + IAR, mask); + out_be32(intc_baseaddr + IAR, mask); - out_be32(INTC_BASE + SIE, mask); + out_be32(intc_baseaddr + SIE, mask); } static void intc_disable_or_mask(struct irq_data *d) { pr_debug("disable: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, 1 << d->hwirq); + out_be32(intc_baseaddr + CIE, 1 << d->hwirq); } static void intc_ack(struct irq_data *d) { pr_debug("ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + IAR, 1 << d->hwirq); + out_be32(intc_baseaddr + IAR, 1 << d->hwirq); } static void intc_mask_ack(struct irq_data *d) @@ -72,8 +66,8 @@ static void intc_mask_ack(struct irq_data *d) unsigned long mask = 1 << d->hwirq; pr_debug("disable_and_ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, mask); - out_be32(INTC_BASE + IAR, mask); + out_be32(intc_baseaddr + CIE, mask); + out_be32(intc_baseaddr + IAR, mask); } static struct irq_chip intc_dev = { @@ -90,7 +84,7 @@ unsigned int get_irq(void) { unsigned int hwirq, irq = -1; - hwirq = in_be32(INTC_BASE + IVR); + hwirq = in_be32(intc_baseaddr + IVR); if (hwirq != -1U) irq = irq_find_mapping(root_domain, hwirq); @@ -124,18 +118,7 @@ void __init init_IRQ(void) { u32 nr_irq, intr_mask; struct device_node *intc = NULL; -#ifdef CONFIG_SELFMOD_INTC - unsigned int intc_baseaddr = 0; - static int arr_func[] = { - (int)&get_irq, - (int)&intc_enable_or_unmask, - (int)&intc_disable_or_mask, - (int)&intc_mask_ack, - (int)&intc_ack, - (int)&intc_end, - 0 - }; -#endif + intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a"); BUG_ON(!intc); @@ -149,9 +132,6 @@ void __init init_IRQ(void) if (intr_mask > (u32)((1ULL << nr_irq) - 1)) pr_info(" ERROR: Mismatch in kind-of-intr param\n"); -#ifdef CONFIG_SELFMOD_INTC - selfmod_function((int *) arr_func, intc_baseaddr); -#endif pr_info("%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n", intc->name, intc_baseaddr, nr_irq, intr_mask); diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c deleted file mode 100644 index 89508bdc9f3c..000000000000 --- a/arch/microblaze/kernel/selfmod.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek - * Copyright (C) 2009 PetaLogix - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include - -#undef DEBUG - -#if __GNUC__ > 3 -#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig. -#endif - -#define OPCODE_IMM 0xB0000000 -#define OPCODE_LWI 0xE8000000 -#define OPCODE_LWI_MASK 0xEC000000 -#define OPCODE_RTSD 0xB60F0008 /* return from func: rtsd r15, 8 */ -#define OPCODE_ADDIK 0x30000000 -#define OPCODE_ADDIK_MASK 0xFC000000 - -#define IMM_BASE (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16)) -#define LWI_BASE (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define LWI_BASE_MASK (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) - -#define MODIFY_INSTR { \ - pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); \ - addr[i] = OPCODE_IMM + (base >> 16); \ - /* keep instruction opcode and add only last 16bits */ \ - addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff); \ - __invalidate_icache(addr[i]); \ - __invalidate_icache(addr[i + 1]); \ - pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); } - -/* NOTE - * self-modified part of code for improvement of interrupt controller - * save instruction in interrupt rutine - */ -void selfmod_function(const int *arr_fce, const unsigned int base) -{ - unsigned int flags, i, j, *addr = NULL; - - local_irq_save(flags); - __disable_icache(); - - /* zero terminated array */ - for (j = 0; arr_fce[j] != 0; j++) { - /* get start address of function */ - addr = (unsigned int *) arr_fce[j]; - pr_debug("%s: func(%d) at 0x%x\n", - __func__, j, (unsigned int) addr); - for (i = 0; ; i++) { - pr_debug("%s: instruction code at %d: 0x%x\n", - __func__, i, addr[i]); - if (addr[i] == IMM_BASE) { - /* detecting of lwi (0xE8) or swi (0xF8) instr - * I can detect both opcode with one mask */ - if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) { - MODIFY_INSTR; - } else /* detection addik for ack */ - if ((addr[i + 1] & ADDIK_BASE_MASK) == - ADDIK_BASE) { - MODIFY_INSTR; - } - } else if (addr[i] == OPCODE_RTSD) { - /* return from function means end of function */ - pr_debug("%s: end of array %d\n", __func__, i); - break; - } - } - } - local_irq_restore(flags); -} /* end of self-modified code */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 0263da7b83dd..4259f8b0f113 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -68,10 +68,6 @@ void __init setup_arch(char **cmdline_p) xilinx_pci_init(); -#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) - pr_notice("Self modified code enable\n"); -#endif - #ifdef CONFIG_VT #if defined(CONFIG_XILINX_CONSOLE) conswitchp = &xil_con; diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index aec5020a6e31..d00a60e62e05 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -29,13 +29,7 @@ #include #include -#ifdef CONFIG_SELFMOD_TIMER -#include -#define TIMER_BASE BARRIER_BASE_ADDR -#else static unsigned int timer_baseaddr; -#define TIMER_BASE timer_baseaddr -#endif static unsigned int freq_div_hz; static unsigned int timer_clock_freq; @@ -61,17 +55,19 @@ static unsigned int timer_clock_freq; static inline void microblaze_timer0_stop(void) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT); + out_be32(timer_baseaddr + TCSR0, + in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT); } static inline void microblaze_timer0_start_periodic(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + out_be32(timer_baseaddr + TLR0, load_val); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + out_be32(timer_baseaddr + TCSR0, TCSR_LOAD); /* see timer data sheet for detail * !ENALL - don't enable 'em all @@ -86,7 +82,7 @@ static inline void microblaze_timer0_start_periodic(unsigned long load_val) * UDT - set the timer as down counter * !MDT0 - generate mode */ - out_be32(TIMER_BASE + TCSR0, + out_be32(timer_baseaddr + TCSR0, TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); } @@ -94,12 +90,13 @@ static inline void microblaze_timer0_start_oneshot(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + out_be32(timer_baseaddr + TLR0, load_val); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + out_be32(timer_baseaddr + TCSR0, TCSR_LOAD); - out_be32(TIMER_BASE + TCSR0, + out_be32(timer_baseaddr + TCSR0, TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); } @@ -146,7 +143,7 @@ static struct clock_event_device clockevent_microblaze_timer = { static inline void timer_ack(void) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0)); + out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0)); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -183,7 +180,7 @@ static __init void microblaze_clockevent_init(void) static cycle_t microblaze_read(struct clocksource *cs) { /* reading actual value of timer 1 */ - return (cycle_t) (in_be32(TIMER_BASE + TCR1)); + return (cycle_t) (in_be32(timer_baseaddr + TCR1)); } static struct timecounter microblaze_tc = { @@ -225,9 +222,10 @@ static int __init microblaze_clocksource_init(void) panic("failed to register clocksource"); /* stop timer1 */ - out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT); + out_be32(timer_baseaddr + TCSR1, + in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT); /* start timer1 - up counting without interrupt */ - out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); + out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); /* register timecounter - for ftrace support */ init_microblaze_timecounter(); @@ -246,17 +244,7 @@ void __init time_init(void) u32 timer_num = 1; struct device_node *timer = NULL; const void *prop; -#ifdef CONFIG_SELFMOD_TIMER - unsigned int timer_baseaddr = 0; - int arr_func[] = { - (int)µblaze_read, - (int)&timer_interrupt, - (int)µblaze_clocksource_init, - (int)µblaze_timer_set_mode, - (int)µblaze_timer_set_next_event, - 0 - }; -#endif + prop = of_get_property(of_chosen, "system-timer", NULL); if (prop) timer = of_find_node_by_phandle(be32_to_cpup(prop)); @@ -278,9 +266,6 @@ void __init time_init(void) BUG(); } -#ifdef CONFIG_SELFMOD_TIMER - selfmod_function((int *) arr_func, timer_baseaddr); -#endif pr_info("%s #0 at 0x%08x, irq=%d\n", timer->name, timer_baseaddr, irq); -- cgit v1.2.3