From f9133a946b21af76708e868eb299f1f26ec82e61 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 1 Apr 2016 08:52:57 +0100 Subject: ata: ahci-platform: Add ports-implemented DT bindings. [ Upstream commit 17dcc37e3e847bc0e67a5b1ec52471fcc6c18682 ] On some SOCs PORTS_IMPL register value is never programmed by the firmware and left at zero value. Which means that no sata ports are available for software. AHCI driver used to cope up with this by fabricating the port_map if the PORTS_IMPL register is read zero, but recent patch broke this workaround as zero value was valid for NVMe disks. This patch adds ports-implemented DT bindings as workaround for this issue in a way that DT can can override the PORTS_IMPL register in cases where the firmware did not program it already. Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Srinivas Kandagatla Acked-by: Tejun Heo Reviewed-by: Andy Gross Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin --- Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 4ab09f2202d4..e6d5a4aa953f 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -30,6 +30,10 @@ Optional properties: - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" +- ports-implemented : Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with + some embedded SOC's. Required properties when using sub-nodes: - #address-cells : number of cells to encode an address -- cgit v1.2.3