From 359af0c69b66dc3aa48a5b678917425760a007e6 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 3 Mar 2014 17:08:11 +0530 Subject: usb: dwc3: adapt dwc3 core to use Generic PHY Framework Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, power_on and power_off the following APIs are used phy_init(), phy_exit(), phy_power_on() and phy_power_off(). However using the old USB phy library wont be removed till the PHYs of all other SoC's using dwc3 core is adapted to the Generic PHY Framework. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi (cherry picked from commit 57303488cd37da58263e842de134dc65f7c626d5) Signed-off-by: Mark Brown Conflicts: drivers/usb/dwc3/core.c --- Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index e807635f9e1c..471366d6a129 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -6,11 +6,13 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + +Optional properties: - usb-phy : array of phandle for the PHY device. The first element in the array is expected to be a handle to the USB2/HS PHY and the second element is expected to be a handle to the USB3/SS PHY - -Optional properties: + - phys: from the *Generic PHY* bindings + - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. This is usually a subnode to DWC3 glue to which it is connected. -- cgit v1.2.3