From 562d4d59b8a1d5f3ca75115d6ac10c7b7bc68c06 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Fri, 4 Oct 2013 12:12:00 +0200 Subject: NFC: Sony Port-100 Series driver This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande Cc: Stephen Tiedemann Tested-by: Cho, Yu-Chen Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 10 +++ drivers/nfc/Makefile | 1 + drivers/nfc/port100.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 198 insertions(+) create mode 100644 drivers/nfc/port100.c diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index b0b64ccb7d7d..c1fb20603338 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -46,6 +46,16 @@ config NFC_SIM If unsure, say N. +config NFC_PORT100 + tristate "Sony NFC Port-100 Series USB device support" + depends on USB + depends on NFC_DIGITAL + help + This adds support for Sony Port-100 chip based USB devices such as the + RC-S380 dongle. + + If unsure, say N. + source "drivers/nfc/pn544/Kconfig" source "drivers/nfc/microread/Kconfig" diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index be7636abcb3f..c715fe8582a8 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_NFC_PN533) += pn533.o obj-$(CONFIG_NFC_WILINK) += nfcwilink.o obj-$(CONFIG_NFC_MEI_PHY) += mei_phy.o obj-$(CONFIG_NFC_SIM) += nfcsim.o +obj-$(CONFIG_NFC_PORT100) += port100.o ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c new file mode 100644 index 000000000000..f167907ae39c --- /dev/null +++ b/drivers/nfc/port100.c @@ -0,0 +1,187 @@ +/* + * Sony NFC Port-100 Series driver + * Copyright (c) 2013, Intel Corporation. + * + * Partly based/Inspired by Stephen Tiedemann's nfcpy + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include +#include +#include + +#define VERSION "0.1" + +#define SONY_VENDOR_ID 0x054c +#define RCS380_PRODUCT_ID 0x06c1 + +#define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ + NFC_PROTO_MIFARE_MASK | \ + NFC_PROTO_FELICA_MASK | \ + NFC_PROTO_NFC_DEP_MASK) + +#define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \ + NFC_DIGITAL_DRV_CAPS_TG_CRC) + +struct port100 { + struct nfc_digital_dev *nfc_digital_dev; + + int skb_headroom; + int skb_tailroom; + + struct usb_device *udev; + struct usb_interface *interface; +}; + +static void port100_abort_cmd(struct nfc_digital_dev *ddev) +{ +} + +static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on) +{ + return -EOPNOTSUPP; +} + +static int port100_in_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + return -EOPNOTSUPP; +} + +static int port100_in_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 _timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return -EOPNOTSUPP; +} + +static int port100_tg_configure_hw(struct nfc_digital_dev *ddev, int type, + int param) +{ + return -EOPNOTSUPP; +} + +static int port100_tg_send_cmd(struct nfc_digital_dev *ddev, + struct sk_buff *skb, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return -EOPNOTSUPP; +} + +static int port100_listen_mdaa(struct nfc_digital_dev *ddev, + struct digital_tg_mdaa_params *params, + u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return -EOPNOTSUPP; +} + +static int port100_listen(struct nfc_digital_dev *ddev, u16 timeout, + nfc_digital_cmd_complete_t cb, void *arg) +{ + return -EOPNOTSUPP; +} + +static struct nfc_digital_ops port100_digital_ops = { + .in_configure_hw = port100_in_configure_hw, + .in_send_cmd = port100_in_send_cmd, + + .tg_listen_mdaa = port100_listen_mdaa, + .tg_listen = port100_listen, + .tg_configure_hw = port100_tg_configure_hw, + .tg_send_cmd = port100_tg_send_cmd, + + .switch_rf = port100_switch_rf, + .abort_cmd = port100_abort_cmd, +}; + +static const struct usb_device_id port100_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = SONY_VENDOR_ID, + .idProduct = RCS380_PRODUCT_ID, + }, + { } +}; +MODULE_DEVICE_TABLE(usb, port100_table); + +static int port100_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct port100 *dev; + int rc; + + dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + usb_set_intfdata(interface, dev); + + nfc_info(&interface->dev, "Sony NFC Port-100 Series attached\n"); + + dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops, + PORT100_PROTOCOLS, + PORT100_CAPABILITIES, + dev->skb_headroom, + dev->skb_tailroom); + if (!dev->nfc_digital_dev) { + nfc_err(&interface->dev, + "Could not allocate nfc_digital_dev.\n"); + rc = -ENOMEM; + goto error; + } + + nfc_digital_set_parent_dev(dev->nfc_digital_dev, &interface->dev); + nfc_digital_set_drvdata(dev->nfc_digital_dev, dev); + + rc = nfc_digital_register_device(dev->nfc_digital_dev); + if (rc) { + nfc_err(&interface->dev, + "Could not register digital device.\n"); + goto free_nfc_dev; + } + + return 0; + +free_nfc_dev: + nfc_digital_free_device(dev->nfc_digital_dev); + +error: + return rc; +} + +static void port100_disconnect(struct usb_interface *interface) +{ + struct port100 *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + nfc_digital_unregister_device(dev->nfc_digital_dev); + nfc_digital_free_device(dev->nfc_digital_dev); + + nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected"); +} + +static struct usb_driver port100_driver = { + .name = "port100", + .probe = port100_probe, + .disconnect = port100_disconnect, + .id_table = port100_table, +}; + +module_usb_driver(port100_driver); + +MODULE_DESCRIPTION("NFC Port-100 series usb driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); -- cgit v1.2.3