aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
2014-12-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ...
2014-12-10Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-12-10net: sock: fix access via invalid file descriptorAlexei Starovoitov
0day robot reported the following crash: [ 21.233581] BUG: unable to handle kernel NULL pointer dereference at 0000000000000007 [ 21.234709] IP: [<ffffffff8156ebda>] sk_attach_bpf+0x39/0xc2 It's due to bpf_prog_get() returning ERR_PTR. Check it properly. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: introduce helper macro for_each_cmsghdrGu Zheng
Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating cmsghdr from msghdr, just cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge branch 'akpm' (patchbomb from Andrew)Linus Torvalds
Merge first patchbomb from Andrew Morton: - a few minor cifs fixes - dma-debug upadtes - ocfs2 - slab - about half of MM - procfs - kernel/exit.c - panic.c tweaks - printk upates - lib/ updates - checkpatch updates - fs/binfmt updates - the drivers/rtc tree - nilfs - kmod fixes - more kernel/exit.c - various other misc tweaks and fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) exit: pidns: fix/update the comments in zap_pid_ns_processes() exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting exit: exit_notify: re-use "dead" list to autoreap current exit: reparent: call forget_original_parent() under tasklist_lock exit: reparent: avoid find_new_reaper() if no children exit: reparent: introduce find_alive_thread() exit: reparent: introduce find_child_reaper() exit: reparent: document the ->has_child_subreaper checks exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting exit: proc: don't try to flush /proc/tgid/task/tgid exit: release_task: fix the comment about group leader accounting exit: wait: drop tasklist_lock before psig->c* accounting exit: wait: don't use zombie->real_parent exit: wait: cleanup the ptrace_reparented() checks usermodehelper: kill the kmod_thread_locker logic usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races ...
2014-12-10mm: memcontrol: lockless page countersJohannes Weiner
Memory is internally accounted in bytes, using spinlock-protected 64-bit counters, even though the smallest accounting delta is a page. The counter interface is also convoluted and does too many things. Introduce a new lockless word-sized page counter API, then change all memory accounting over to it. The translation from and to bytes then only happens when interfacing with userspace. The removed locking overhead is noticable when scaling beyond the per-cpu charge caches - on a 4-socket machine with 144-threads, the following test shows the performance differences of 288 memcgs concurrently running a page fault benchmark: vanilla: 18631648.500498 task-clock (msec) # 140.643 CPUs utilized ( +- 0.33% ) 1,380,638 context-switches # 0.074 K/sec ( +- 0.75% ) 24,390 cpu-migrations # 0.001 K/sec ( +- 8.44% ) 1,843,305,768 page-faults # 0.099 M/sec ( +- 0.00% ) 50,134,994,088,218 cycles # 2.691 GHz ( +- 0.33% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 8,049,712,224,651 instructions # 0.16 insns per cycle ( +- 0.04% ) 1,586,970,584,979 branches # 85.176 M/sec ( +- 0.05% ) 1,724,989,949 branch-misses # 0.11% of all branches ( +- 0.48% ) 132.474343877 seconds time elapsed ( +- 0.21% ) lockless: 12195979.037525 task-clock (msec) # 133.480 CPUs utilized ( +- 0.18% ) 832,850 context-switches # 0.068 K/sec ( +- 0.54% ) 15,624 cpu-migrations # 0.001 K/sec ( +- 10.17% ) 1,843,304,774 page-faults # 0.151 M/sec ( +- 0.00% ) 32,811,216,801,141 cycles # 2.690 GHz ( +- 0.18% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 9,999,265,091,727 instructions # 0.30 insns per cycle ( +- 0.10% ) 2,076,759,325,203 branches # 170.282 M/sec ( +- 0.12% ) 1,656,917,214 branch-misses # 0.08% of all branches ( +- 0.55% ) 91.369330729 seconds time elapsed ( +- 0.45% ) On top of improved scalability, this also gets rid of the icky long long types in the very heart of memcg, which is great for 32 bit and also makes the code a lot more readable. Notable differences between the old and new API: - res_counter_charge() and res_counter_charge_nofail() become page_counter_try_charge() and page_counter_charge() resp. to match the more common kernel naming scheme of try_do()/do() - res_counter_uncharge_until() is only ever used to cancel a local counter and never to uncharge bigger segments of a hierarchy, so it's replaced by the simpler page_counter_cancel() - res_counter_set_limit() is replaced by page_counter_limit(), which expects its callers to serialize against themselves - res_counter_memparse_write_strategy() is replaced by page_counter_limit(), which rounds down to the nearest page size - rather than up. This is more reasonable for explicitely requested hard upper limits. - to keep charging light-weight, page_counter_try_charge() charges speculatively, only to roll back if the result exceeds the limit. Because of this, a failing bigger charge can temporarily lock out smaller charges that would otherwise succeed. The error is bounded to the difference between the smallest and the biggest possible charge size, so for memcg, this means that a failing THP charge can send base page charges into reclaim upto 2MB (4MB) before the limit would have been reached. This should be acceptable. [akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse] [akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-12-10Merge tag 'nfs-for-3.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv4.2 client support for hole punching and preallocation. - Further RPC/RDMA client improvements. - Add more RPC transport debugging tracepoints. - Add RPC debugging tools in debugfs. Bugfixes: - Stable fix for layoutget error handling - Fix a change in COMMIT behaviour resulting from the recent io code updates" * tag 'nfs-for-3.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits) sunrpc: add a debugfs rpc_xprt directory with an info file in it sunrpc: add debugfs file for displaying client rpc_task queue nfs: Add DEALLOCATE support nfs: Add ALLOCATE support NFS: Clean up nfs4_init_callback() NFS: SETCLIENTID XDR buffer sizes are incorrect SUNRPC: serialize iostats updates xprtrdma: Display async errors xprtrdma: Enable pad optimization xprtrdma: Re-write rpcrdma_flush_cqs() xprtrdma: Refactor tasklet scheduling xprtrdma: unmap all FMRs during transport disconnect xprtrdma: Cap req_cqinit xprtrdma: Return an errno from rpcrdma_register_external() nfs: define nfs_inc_fscache_stats and using it as possible nfs: replace nfs_add_stats with nfs_inc_stats when add one NFS: Deletion of unnecessary checks before the function call "nfs_put_client" sunrpc: eliminate RPC_TRACEPOINTS sunrpc: eliminate RPC_DEBUG lockd: eliminate LOCKD_DEBUG ...
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10irda: Convert function pointer arrays and uses to constJoe Perches
Making things const is a good thing. (x86-64 defconfig with all irda) $ size net/irda/built-in.o* text data bss dec hex filename 109276 1868 244 111388 1b31c net/irda/built-in.o.new 108828 2316 244 111388 1b31c net/irda/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10llc: Make llc_sap_action_t function pointer arrays constJoe Perches
It's better when function pointer arrays aren't modifiable. Net change: $ size net/llc/built-in.o.* text data bss dec hex filename 61193 12758 1344 75295 1261f net/llc/built-in.o.new 47113 27030 1344 75487 126df net/llc/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10llc: Make llc_conn_ev_qfyr_t function pointer arrays constJoe Perches
It's better when function pointer arrays aren't modifiable. Net change from original: $ size net/llc/built-in.o.* text data bss dec hex filename 61065 12886 1344 75295 1261f net/llc/built-in.o.new 47113 27030 1344 75487 126df net/llc/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10llc: Make function pointer arrays constJoe Perches
It's better when function pointer arrays aren't modifiable. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: replace remaining users of arch_fast_hash with jhashDaniel Borkmann
This patch effectively reverts commit 500f80872645 ("net: ovs: use CRC32 accelerated flow hash if available"), and other remaining arch_fast_hash() users such as from nfsd via commit 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.") where it has been used as a hash function for bloom filtering. While we think that these users are actually not much of concern, it has been requested to remove the arch_fast_hash() library bits that arose from [1] entirely as per recent discussion [2]. The main argument is that using it as a hash may introduce bias due to its linearity (see avalanche criterion) and thus makes it less clear (though we tried to document that) when this security/performance trade-off is actually acceptable for a general purpose library function. Lets therefore avoid any further confusion on this matter and remove it to prevent any future accidental misuse of it. For the time being, this is going to make hashing of flow keys a bit more expensive in the ovs case, but future work could reevaluate a different hashing discipline. [1] https://patchwork.ozlabs.org/patch/299369/ [2] https://patchwork.ozlabs.org/patch/418756/ Cc: Neil Brown <neilb@suse.de> Cc: Francesco Fusco <fusco@ntop.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10netlink: use jhash as hashfn for rhashtableDaniel Borkmann
For netlink, we shouldn't be using arch_fast_hash() as a hashing discipline, but rather jhash() instead. Since netlink sockets can be opened by any user, a local attacker would be able to easily create collisions with the DPDK-derived arch_fast_hash(), which trades off performance for security by using crc32 CPU instructions on x86_64. While it might have a legimite use case in other places, it should be avoided in netlink context, though. As rhashtable's API is very flexible, we could later on still decide on other hashing disciplines, if legitimate. Reference: http://thread.gmane.org/gmane.linux.kernel/1844123 Fixes: e341694e3eb5 ("netlink: Convert netlink_lookup() to use RCU protected hash table") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10tipc: fix broadcast wakeup contention after congestionRichard Alpe
commit 908344cdda80 ("tipc: fix bug in multicast congestion handling") introduced a race in the broadcast link wakeup functionality. This patch eliminates this broadcast link wakeup race caused by operation on the wakeup list without proper locking. If this race hit and corrupted the list all subsequent wakeup messages would be lost, resulting in a considerable memory leak. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skbAlexander Duyck
This change pulls the core functionality out of __netdev_alloc_skb and places them in a new function named __alloc_rx_skb. The reason for doing this is to make these bits accessible to a new function __napi_alloc_skb. In addition __alloc_rx_skb now has a new flags value that is used to determine which page frag pool to allocate from. If the SKB_ALLOC_NAPI flag is set then the NAPI pool is used. The advantage of this is that we do not have to use local_irq_save/restore when accessing the NAPI pool from NAPI context. In my test setup I saw at least 11ns of savings using the napi_alloc_skb function versus the netdev_alloc_skb function, most of this being due to the fact that we didn't have to call local_irq_save/restore. The main use case for napi_alloc_skb would be for things such as copybreak or page fragment based receive paths where an skb is allocated after the data has been received instead of before. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_fragAlexander Duyck
This patch splits the netdev_alloc_frag function up so that it can be used on one of two page frag pools instead of being fixed on the netdev_alloc_cache. By doing this we can add a NAPI specific function __napi_alloc_frag that accesses a pool that is only used from softirq context. The advantage to this is that we do not need to call local_irq_save/restore which can be a significant savings. I also took the opportunity to refactor the core bits that were placed in __alloc_page_frag. First I updated the allocation to do either a 32K allocation or an order 0 page. This is based on the changes in commmit d9b2938aa where it was found that latencies could be reduced in case of failures. Then I also rewrote the logic to work from the end of the page to the start. By doing this the size value doesn't have to be used unless we have run out of space for page fragments. Finally I cleaned up the atomic bits so that we just do an atomic_sub_and_test and if that returns true then we set the page->_count via an atomic_set. This way we can remove the extra conditional for the atomic_read since it would have led to an atomic_inc in the case of success anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge branch 'for-davem-2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs More iov_iter work for the networking from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y. This instruments might_sleep() checks to catch places that nest blocking primitives - such as mutex usage in a wait loop. Such bugs can result in hard to debug races/hangs. Another category of invalid nesting that this facility will detect is the calling of blocking functions from within schedule() -> sched_submit_work() -> blk_schedule_flush_plug(). There's some potential for false positives (if secondary blocking primitives themselves are not ready yet for this facility), but the kernel will warn once about such bugs per bootup, so the warning isn't much of a nuisance. This feature comes with a number of fixes, for problems uncovered with it, so no messages are expected normally. - Another round of sched/numa optimizations and refinements, for CONFIG_NUMA_BALANCING=y. - Another round of sched/dl fixes and refinements. Plus various smaller fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched: Add missing rcu protection to wake_up_all_idle_cpus sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK sched/numa: Init numa balancing fields of init_task sched/deadline: Remove unnecessary definitions in cpudeadline.h sched/cpupri: Remove unnecessary definitions in cpupri.h sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task() sched/fair: Fix stale overloaded status in the busiest group finding logic sched: Move p->nr_cpus_allowed check to select_task_rq() sched/completion: Document when to use wait_for_completion_io_*() sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC sched/fair: Kill task_struct::numa_entry and numa_group::task_list sched: Refactor task_struct to use numa_faults instead of numa_* pointers sched/deadline: Don't check CONFIG_SMP in switched_from_dl() sched/deadline: Reschedule from switched_from_dl() after a successful pull sched/deadline: Push task away if the deadline is equal to curr during wakeup sched/deadline: Add deadline rq status print sched/deadline: Fix artificial overrun introduced by yield_task_dl() sched/rt: Clean up check_preempt_equal_prio() sched/core: Use dl_bw_of() under rcu_read_lock_sched() sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu ...
2014-12-09net: sched: cls: use nla_nest_cancel instead of nlmsg_trimJiri Pirko
To cancel nesting, this function is more convenient. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: fix suspicious rcu_dereference_check in net/sched/sch_fq_codel.cValdis.Kletnieks@vt.edu
commit 46e5da40ae (net: qdisc: use rcu prefix and silence sparse warnings) triggers a spurious warning: net/sched/sch_fq_codel.c:97 suspicious rcu_dereference_check() usage! The code should be using the _bh variant of rcu_dereference. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp: fix more NULL deref after prequeue changesEric Dumazet
When I cooked commit c3658e8d0f1 ("tcp: fix possible NULL dereference in tcp_vX_send_reset()") I missed other spots we could deref a NULL skb_dst(skb) Again, if a socket is provided, we do not need skb_dst() to get a pointer to network namespace : sock_net(sk) is good enough. Reported-by: Dann Frazier <dann.frazier@canonical.com> Bisected-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tipc: avoid double lock 'spin_lock:&seq->lock'Ying Xue
The commit fb9962f3cefe ("tipc: ensure all name sequences are properly protected with its lock") involves below errors: net/tipc/name_table.c:980 tipc_purge_publications() error: double lock 'spin_lock:&seq->lock' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09rocker: remove swdev modeRoopa Prabhu
Remove use of 'swdev' mode in rocker. rocker dev offloads can use the BRIDGE_FLAGS_SELF to indicate offload to hardware. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge tag 'master-2014-12-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-12-08 Please pull this last batch of pending wireless updates for the 3.19 tree... For the wireless bits, Johannes says: "This time I have Felix's no-status rate control work, which will allow drivers to work better with rate control even if they don't have perfect status reporting. In addition to this, a small hwsim fix from Patrik, one of the regulatory patches from Arik, and a number of cleanups and fixes I did myself. Of note is a patch where I disable CFG80211_WEXT so that compatibility is no longer selectable - this is intended as a wake-up call for anyone who's still using it, and is still easily worked around (it's a one-line patch) before we fully remove the code as well in the future." For the Bluetooth bits, Johan says: "Here's one more bluetooth-next pull request for 3.19: - Minor cleanups for ieee802154 & mac802154 - Fix for the kernel warning with !TASK_RUNNING reported by Kirill A. Shutemov - Support for another ath3k device - Fix for tracking link key based security level - Device tree bindings for btmrvl + a state update fix - Fix for wrong ACL flags on LE links" And... "In addition to the previous one this contains two more cleanups to mac802154 as well as support for some new HCI features from the Bluetooth 4.2 specification. From the original request: 'Here's what should be the last bluetooth-next pull request for 3.19. It's rather large but the majority of it is the Low Energy Secure Connections feature that's part of the Bluetooth 4.2 specification. The specification went public only this week so we couldn't publish the corresponding code before that. The code itself can nevertheless be considered fairly mature as it's been in development for over 6 months and gone through several interoperability test events. Besides LE SC the pull request contains an important fix for command complete events for mgmt sockets which also fixes some leaks of hci_conn objects when powering off or unplugging Bluetooth adapters. A smaller feature that's part of the pull request is service discovery support. This is like normal device discovery except that devices not matching specific UUIDs or strong enough RSSI are filtered out. Other changes that the pull request contains are firmware dump support to the btmrvl driver, firmware download support for Broadcom BCM20702A0 variants, as well as some coding style cleanups in 6lowpan & ieee802154/mac802154 code.'" For the NFC bits, Samuel says: "With this one we get: - NFC digital improvements for DEP support: Chaining, NACK and ATN support added. - NCI improvements: Support for p2p target, SE IO operand addition, SE operands extensions to support proprietary implementations, and a few fixes. - NFC HCI improvements: OPEN_PIPE and NOTIFY_ALL_CLEARED support, and SE IO operand addition. - A bunch of minor improvements and fixes for STMicro st21nfcb and st21nfca" For the iwlwifi bits, Emmanuel says: "Major works are CSA and TDLS. On top of that I have a new firmware API for scan and a few rate control improvements. Johannes find a few tricks to improve our CPU utilization and adds support for a new spin of 7265 called 7265D. Along with this a few random things that don't stand out." And... "I deprecate here -8.ucode since -9 has been published long ago. Along with that I have a new activity, we have now better a infrastructure for firmware debugging. This will allow to have configurable probes insides the firmware. Luca continues his work on NetDetect, this feature is now complete. All the rest is minor fixes here and there." For the Atheros bits, Kalle says: "Only ath10k changes this time and no major changes. Most visible are: o new debugfs interface for runtime firmware debugging (Yanbo) o fix shared WEP (Sujith) o don't rebuild whenever kernel version changes (Johannes) o lots of refactoring to make it easier to add new hw support (Michal) There's also smaller fixes and improvements with no point of listing here." In addition, there are a few last minute updates to ath5k, ath9k, brcmfmac, brcmsmac, mwifiex, rt2x00, rtlwifi, and wil6210. Also included is a pull of the wireless tree to pick-up the fixes originally included in "pull request: wireless 2014-12-03"... Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: avoid to call skb_queue_len againLi RongQing
the queue length of sd->input_pkt_queue has been put into qlen, and impossible to change, since hold the lock Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge tag 'linux-can-next-for-3.19-20141207' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2014-12-07 this is a pull request of 8 patches for net-next/master. Andri Yngvason contributes 4 patches in which the CAN state change handling is consolidated and unified among the sja1000, mscan and flexcan driver. The three patches by Jeremiah Mahler fix spelling mistakes and eliminate the banner[] variable in various parts. And a patch by me that switches on sparse endianess checking by default. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp: refine TSO autosizingEric Dumazet
Commit 95bd09eb2750 ("tcp: TSO packets automatic sizing") tried to control TSO size, but did this at the wrong place (sendmsg() time) At sendmsg() time, we might have a pessimistic view of flow rate, and we end up building very small skbs (with 2 MSS per skb). This is bad because : - It sends small TSO packets even in Slow Start where rate quickly increases. - It tends to make socket write queue very big, increasing tcp_ack() processing time, but also increasing memory needs, not necessarily accounted for, as fast clones overhead is currently ignored. - Lower GRO efficiency and more ACK packets. Servers with a lot of small lived connections suffer from this. Lets instead fill skbs as much as possible (64KB of payload), but split them at xmit time, when we have a precise idea of the flow rate. skb split is actually quite efficient. Patch looks bigger than necessary, because TCP Small Queue decision now has to take place after the eventual split. As Neal suggested, introduce a new tcp_tso_autosize() helper, so that tcp_tso_should_defer() can be synchronized on same goal. Rename tp->xmit_size_goal_segs to tp->gso_segs, as this variable contains number of mss that we can put in GSO packet, and is not related to the autosizing goal anymore. Tested: 40 ms rtt link nstat >/dev/null netperf -H remote -l -2000000 -- -s 1000000 nstat | egrep "IpInReceives|IpOutRequests|TcpOutSegs|IpExtOutOctets" Before patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/s 87380 2000000 2000000 0.36 44.22 IpInReceives 600 0.0 IpOutRequests 599 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2033249 0.0 After patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 2000000 2000000 0.36 44.27 IpInReceives 221 0.0 IpOutRequests 232 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2013953 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09skb_copy_datagram_iovec() can dieAl Viro
no callers other than itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch memcpy_to_msg() and skb_copy{,_and_csum}_datagram_msg() to primitivesAl Viro
... making both non-draining. That means that tcp_recvmsg() becomes non-draining. And _that_ would break iscsit_do_rx_data() unless we a) make sure tcp_recvmsg() is uniformly non-draining (it is) b) make sure it copes with arbitrary (including shifted) iov_iter (it does, all it uses is iov_iter primitives) c) make iscsit_do_rx_data() initialize ->msg_iter only once. Fortunately, (c) is doable with minimal work and we are rid of one the two places where kernel send/recvmsg users would be unhappy with non-draining behaviour. Actually, that makes all but one of ->recvmsg() instances iov_iter-clean. The exception is skcipher_recvmsg() and it also isn't hard to convert to primitives (iov_iter_get_pages() is needed there). That'll wait a bit - there's some interplay with ->sendmsg() path for that one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09first fruits - kill l2cap ->memcpy_fromiovec()Al Viro
Just use copy_from_iter(). That's what this method is trying to do in all cases, in a very convoluted fashion. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09put iov_iter into msghdrAl Viro
Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09vmci: propagate msghdr all way down to __qp_memcpy_from_queue()Al Viro
... and switch it to memcpy_to_msg() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch l2cap ->memcpy_fromiovec() to msghdrAl Viro
it'll die soon enough - now that kvec-backed iov_iter works regardless of set_fs(), both instances will become copy_from_iter() as soon as we introduce ->msg_iter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09switch tcp_sock->ucopy from iovec (ucopy.iov) to msghdr (ucopy.msg)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09ip_generic_getfrag, udplite_getfrag: switch to passing msghdrAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09ipv6 equivalent of "ipv4: Avoid reading user iov twice after ↵Al Viro
raw_probe_proto_opt" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09raw.c: stick msghdr into raw_frag_vecAl Viro
we'll want access to ->msg_iter Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09dst: no need to take reference on DST_NOCACHE dstsHannes Frederic Sowa
Since commit f8864972126899 ("ipv4: fix dst race in sk_dst_get()") DST_NOCACHE dst_entries get freed by RCU. So there is no need to get a reference on them when we are in rcu protected sections. Cc: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09openvswitch: set correct protocol on route lookupJiri Benc
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f35f7e ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: sched: cls_basic: fix error path in basic_change()Jiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net/socket.c : introduce helper function do_sock_sendmsg to replace ↵Gu Zheng
reduplicate code Introduce helper function do_sock_sendmsg() to simplify sock_sendmsg{_nosec}, and replace reduplicate code. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: refine Hystart delay thresholdEric Dumazet
In commit 2b4636a5f8ca ("tcp_cubic: make the delay threshold of HyStart less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms. The remaining problem is that using delay_min + (delay_min/16) as the threshold is too sensitive. 6.25 % of variation is too small for rtt above 60 ms, which are not uncommon. Lets use 12.5 % instead (delay_min + (delay_min/8)) Tested: 80 ms RTT between peers, FQ/pacing packet scheduler on sender. 10 bulk transfers of 10 seconds : nstat >/dev/null for i in `seq 1 10` do netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT done nstat | grep Hystart With the 6.25 % threshold : THROUGHPUT=20.66 THROUGHPUT=249.38 THROUGHPUT=254.10 THROUGHPUT=14.94 THROUGHPUT=251.92 THROUGHPUT=237.73 THROUGHPUT=19.18 THROUGHPUT=252.89 THROUGHPUT=21.32 THROUGHPUT=15.58 TcpExtTCPHystartTrainDetect 2 0.0 TcpExtTCPHystartTrainCwnd 4756 0.0 TcpExtTCPHystartDelayDetect 5 0.0 TcpExtTCPHystartDelayCwnd 180 0.0 With the 12.5 % threshold THROUGHPUT=251.09 THROUGHPUT=247.46 THROUGHPUT=250.92 THROUGHPUT=248.91 THROUGHPUT=250.88 THROUGHPUT=249.84 THROUGHPUT=250.51 THROUGHPUT=254.15 THROUGHPUT=250.62 THROUGHPUT=250.89 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 3175 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: add SNMP counters to track how effective is HystartEric Dumazet
When deploying FQ pacing, one thing we noticed is that CUBIC Hystart triggers too soon. Having SNMP counters to have an idea of how often the various Hystart methods trigger is useful prior to any modifications. This patch adds SNMP counters tracking, how many time "ack train" or "Delay" based Hystart triggers, and cumulative sum of cwnd at the time Hystart decided to end SS (Slow Start) myhost:~# nstat -a | grep Hystart TcpExtTCPHystartTrainDetect 9 0.0 TcpExtTCPHystartTrainCwnd 20650 0.0 TcpExtTCPHystartDelayDetect 10 0.0 TcpExtTCPHystartDelayCwnd 360 0.0 -> Train detection was triggered 9 times, and average cwnd was 20650/9=2294, Delay detection was triggered 10 times and average cwnd was 36 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: sched: cls: remove unused op put from tcf_proto_opsJiri Pirko
It is never called and implementations are void. So just remove it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tipc: fix missing spinlock init and nullptr oopsErik Hugne
commit 908344cdda80 ("tipc: fix bug in multicast congestion handling") introduced two bugs with the bclink wakeup function. This commit fixes the missing spinlock init for the waiting_sks list. We also eliminate the race condition between the waiting_sks length check/dequeue operations in tipc_bclink_wakeup_users by simply removing the redundant length check. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Tero Aho <Tero.Aho@coriant.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: avoid two atomic operations in fast clonesEric Dumazet
Commit ce1a4ea3f125 ("net: avoid one atomic operation in skb_clone()") took the wrong way to save one atomic operation. It is actually possible to avoid two atomic operations, if we do not change skb->fclone values, and only rely on clone_ref content to signal if the clone is available or not. skb_clone() can simply use the fast clone if clone_ref is 1. kfree_skbmem() can avoid the atomic_dec_and_test() if clone_ref is 1. Note that because we usually free the clone before the original skb, this particular attempt is only done for the original skb to have better branch prediction. SKB_FCLONE_FREE is removed. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Update old iproute2 and Xen Remus linksAndrew Shewmaker
Signed-off-by: Andrew Shewmaker <agshew@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>