aboutsummaryrefslogtreecommitdiff
path: root/kernel/stop_machine.c
AgeCommit message (Collapse)Author
2013-11-11stop_machine: Fix race between stop_two_cpus() and stop_cpus()Rik van Riel
There is a race between stop_two_cpus, and the global stop_cpus. It is possible for two CPUs to get their stopper functions queued "backwards" from one another, resulting in the stopper threads getting stuck, and the system hanging. This can happen because queuing up stoppers is not synchronized. This patch adds synchronization between stop_cpus (a rare operation), and stop_two_cpus. Reported-and-Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-16sched: Remove get_online_cpus() usagePeter Zijlstra
Remove get_online_cpus() usage from the scheduler; there's 4 sites that use it: - sched_init_smp(); where its completely superfluous since we're in 'early' boot and there simply cannot be any hotplugging. - sched_getaffinity(); we already take a raw spinlock to protect the task cpus_allowed mask, this disables preemption and therefore also stabilizes cpu_online_mask as that's modified using stop_machine. However switch to active mask for symmetry with sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active mask stability by inserting sync_rcu/sched() into _cpu_down. - sched_setaffinity(); we don't appear to need get_online_cpus() either, there's two sites where hotplug appears relevant: * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask, for the cpuset case we hold task_lock, which is a spinlock and thus for mainline disables preemption (might cause pain on RT). * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has preemption properly disabled; also it already deals with hotplug races explicitly where it releases them. - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for us with a little trickery. By adding a sync_sched/rcu() after the CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for cpu_active_mask. Use these to validate that both our cpus are active when queueing the stop work before we queue the stop_machine works for take_cpu_down(). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09stop_machine: Introduce stop_two_cpus()Peter Zijlstra
Introduce stop_two_cpus() in order to allow controlled swapping of two tasks. It repurposes the stop_machine() state machine but only stops the two cpus which we can do with on-stack structures and avoid machine wide synchronization issues. The ordering of CPUs is important to avoid deadlocks. If unordered then two cpus calling stop_two_cpus on each other simultaneously would attempt to queue in the opposite order on each CPU causing an AB-BA style deadlock. By always having the lowest number CPU doing the queueing of works, we can guarantee that works are always queued in the same order, and deadlocks are avoided. Signed-off-by: Peter Zijlstra <peterz@infradead.org> [ Implemented deadlock avoidance. ] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1381141781-10992-38-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-26stop_machine: Mark per cpu stopper enabled earlyThomas Gleixner
commit 14e568e78 (stop_machine: Use smpboot threads) introduced the following regression: Before this commit the stopper enabled bit was set in the online notifier. CPU0 CPU1 cpu_up cpu online hotplug_notifier(ONLINE) stopper(CPU1)->enabled = true; ... stop_machine() The conversion to smpboot threads moved the enablement to the wakeup path of the parked thread. The majority of users seem to have the following working order: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stopper thread runs stopper(CPU1)->enabled = true; stop_machine() But Konrad and Sander have observed: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stop_machine() stopper thread runs stopper(CPU1)->enabled = true; Now the stop machinery kicks CPU0 into the stop loop, where it gets stuck forever because the queue code saw stopper(CPU1)->enabled == false, so CPU0 waits for CPU1 to enter stomp_machine, but the CPU1 stopper work got discarded due to enabled == false. Add a pre_unpark function to the smpboot thread descriptor and call it before waking the thread. This fixes the problem at hand, but the stop_machine code should be more robust. The stopper->enabled flag smells fishy at best. Thanks to Konrad for going through a loop of debug patches and providing the information to decode this issue. Reported-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1302261843240.22263@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-14stop_machine: Use smpboot threadsThomas Gleixner
Use the smpboot thread infrastructure. Mark the stopper thread selfparking and park it after it has finished the take_cpu_down() work. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Arjan van de Veen <arjan@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Richard Weinberger <rw@linutronix.de> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130131120741.686315164@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-14stop_machine: Store task reference in a separate per cpu variableThomas Gleixner
To allow the stopper thread being managed by the smpboot thread infrastructure separate out the task storage from the stopper data structure. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Arjan van de Veen <arjan@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Richard Weinberger <rw@linutronix.de> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130131120741.626690384@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31stop_machine: make stop_machine safe and efficient to call earlyJeremy Fitzhardinge
Make stop_machine() safe to call early in boot, before SMP has been set up, by simply calling the callback function directly if there's only one CPU online. [ Fixes from AKPM: - add comment - local_irq_flags, not save_flags - also call hard_irq_disable() for systems which need it Tejun suggested using an explicit flag rather than just looking at the online cpu count. ] Cc: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31kernel: Map most files to use export.h instead of module.hPaul Gortmaker
The changed files were only including linux/module.h for the EXPORT_SYMBOL infrastructure, and nothing else. Revector them onto the isolated export header for faster compile times. Nothing to see here but a whole lot of instances of: -#include <linux/module.h> +#include <linux/export.h> This commit is only changing the kernel dir; next targets will probably be mm, fs, the arch dirs, etc. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-27x86, mtrr: use stop_machine APIs for doing MTRR rendezvousSuresh Siddha
MTRR rendezvous sequence is not implemened using stop_machine() before, as this gets called both from the process context aswell as the cpu online paths (where the cpu has not come online and the interrupts are disabled etc). Now that we have a new stop_machine_from_inactive_cpu() API, use it for rendezvous during mtrr init of a logical processor that is coming online. For the rest (runtime MTRR modification, system boot, resume paths), use stop_machine() to implement the rendezvous sequence. This will consolidate and cleanup the code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110623182057.076997177@sbsiddha-MOBL3.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27stop_machine: implement stop_machine_from_inactive_cpu()Tejun Heo
Currently, mtrr wants stop_machine functionality while a CPU is being brought up. As stop_machine() requires the calling CPU to be active, mtrr implements its own stop_machine using stop_one_cpu() on each online CPU. This doesn't only unnecessarily duplicate complex logic but also introduces a possibility of deadlock when it races against the generic stop_machine(). This patch implements stop_machine_from_inactive_cpu() to serve such use cases. Its functionality is basically the same as stop_machine(); however, it should be called from a CPU which isn't active and doesn't depend on working scheduling on the calling CPU. This is achieved by using busy loops for synchronization and open-coding stop_cpus queuing and waiting with direct invocation of fn() for local CPU inbetween. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110623182056.982526827@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27stop_machine: reorganize stop_cpus() implementationTejun Heo
Refactor the queuing part of the stop cpus work from __stop_cpus() into queue_stop_cpus_work(). The reorganization is to help future improvements to stop_machine() and doesn't introduce any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110623182056.897818337@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-06-27x86, mtrr: lock stop machine during MTRR rendezvous sequenceSuresh Siddha
MTRR rendezvous sequence using stop_one_cpu_nowait() can potentially happen in parallel with another system wide rendezvous using stop_machine(). This can lead to deadlock (The order in which works are queued can be different on different cpu's. Some cpu's will be running the first rendezvous handler and others will be running the second rendezvous handler. Each set waiting for the other set to join for the system wide rendezvous, leading to a deadlock). MTRR rendezvous sequence is not implemented using stop_machine() as this gets called both from the process context aswell as the cpu online paths (where the cpu has not come online and the interrupts are disabled etc). stop_machine() works with only online cpus. For now, take the stop_machine mutex in the MTRR rendezvous sequence that gets called from an online cpu (here we are in the process context and can potentially sleep while taking the mutex). And the MTRR rendezvous that gets triggered during cpu online doesn't need to take this stop_machine lock (as the stop_machine() already ensures that there is no cpu hotplug going on in parallel by doing get_online_cpus()) TBD: Pursue a cleaner solution of extending the stop_machine() infrastructure to handle the case where the calling cpu is still not online and use this for MTRR rendezvous sequence. fixes: https://bugzilla.novell.com/show_bug.cgi?id=672008 Reported-by: Vadim Kotelnikov <vadimuzzz@inbox.ru> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110623182056.807230326@sbsiddha-MOBL3.sc.intel.com Cc: stable@kernel.org # 2.6.35+, backport a week or two after this gets more testing in mainline Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-03-22kthread: use kthread_create_on_node()Eric Dumazet
ksoftirqd, kworker, migration, and pktgend kthreads can be created with kthread_create_on_node(), to get proper NUMA affinities for their stack and task_struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <tj@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26stop_machine: convert cpu notifier to return encapsulate errno valueAkinobu Mita
In commit e6bde73b07edeb703d4c89c1daabc09c303de11f ("cpu-hotplug: return better errno on cpu hotplug failure"), the cpu notifier can return an encapsulated errno value. This converts the cpu notifier to return an encapsulated errno value for stop_machine(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26kernel/stop_machine.c: fix unused variable warningRakib Mullick
kernel/stop_machine.c: In function `cpu_stopper_thread': kernel/stop_machine.c:265: warning: unused variable `ksym_buf' ksym_buf[] is unused if WARN_ON() is a no-op. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-18sched: Create special class for stop/migrate workPeter Zijlstra
In order to separate the stop/migrate work thread from the SCHED_FIFO implementation, create a special class for it that is of higher priority than SCHED_FIFO itself. This currently solves a problem where cpu-hotplug consumes so much cpu-time that the SCHED_FIFO class gets throttled, but has the bandwidth replenishment timer pending on the now dead cpu. It is also required for when we add the planned deadline scheduling class above SCHED_FIFO, as the stop/migrate thread still needs to transcent those tasks. Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1285165776.2275.1022.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-09stop_machine: struct cpu_stopper, remove alignment padding on 64 bitsRichard Kennedy
Reorder elements in structure cpu_stopper to remove alignment padding on 64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes per cpu. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-31sched: Make sure timers have migrated before killing the migration_threadAmit K. Arora
Problem: In a stress test where some heavy tests were running along with regular CPU offlining and onlining, a hang was observed. The system seems to be hung at a point where migration_call() tries to kill the migration_thread of the dying CPU, which just got moved to the current CPU. This migration thread does not get a chance to run (and die) since rt_throttled is set to 1 on current, and it doesn't get cleared as the hrtimer which is supposed to reset the rt bandwidth (sched_rt_period_timer) is tied to the CPU which we just marked dead! Solution: This patch pushes the killing of migration thread to "CPU_POST_DEAD" event. By then all the timers (including sched_rt_period_timer) should have got migrated (along with other callbacks). Signed-off-by: Amit Arora <aarora@in.ibm.com> Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20100525132346.GA14986@amitarora.in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18stop_machine: Move local variable closer to the usage site in ↵Ingo Molnar
cpu_stop_cpu_callback() This addresses the following compiler warning: kernel/stop_machine.c: In function 'cpu_stop_cpu_callback': kernel/stop_machine.c:297: warning: unused variable 'work' Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <tip-3fc1f1e27a5b807791d72e5d992aa33b668a6626@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-08cpu_stop: add dummy implementation for UPTejun Heo
When !CONFIG_SMP, cpu_stop functions weren't defined at all which could lead to build failures if UP code uses cpu_stop facility. Add dummy cpu_stop implementation for UP. The waiting variants execute the work function directly with preempt disabled and stop_one_cpu_nowait() schedules a workqueue work. Makefile and ifdefs around stop_machine implementation are updated to accomodate CONFIG_SMP && !CONFIG_STOP_MACHINE case. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ingo Molnar <mingo@elte.hu>
2010-05-06sched: replace migration_thread with cpu_stopTejun Heo
Currently migration_thread is serving three purposes - migration pusher, context to execute active_load_balance() and forced context switcher for expedited RCU synchronize_sched. All three roles are hardcoded into migration_thread() and determining which job is scheduled is slightly messy. This patch kills migration_thread and replaces all three uses with cpu_stop. The three different roles of migration_thread() are splitted into three separate cpu_stop callbacks - migration_cpu_stop(), active_load_balance_cpu_stop() and synchronize_sched_expedited_cpu_stop() - and each use case now simply asks cpu_stop to execute the callback as necessary. synchronize_sched_expedited() was implemented with private preallocated resources and custom multi-cpu queueing and waiting logic, both of which are provided by cpu_stop. synchronize_sched_expedited_count is made atomic and all other shared resources along with the mutex are dropped. synchronize_sched_expedited() also implemented a check to detect cases where not all the callback got executed on their assigned cpus and fall back to synchronize_sched(). If called with cpu hotplug blocked, cpu_stop already guarantees that and the condition cannot happen; otherwise, stop_machine() would break. However, this patch preserves the paranoid check using a cpumask to record on which cpus the stopper ran so that it can serve as a bisection point if something actually goes wrong theree. Because the internal execution state is no longer visible, rcu_expedited_torture_stats() is removed. This patch also renames cpu_stop threads to from "stopper/%d" to "migration/%d". The names of these threads ultimately don't matter and there's no reason to make unnecessary userland visible changes. With this patch applied, stop_machine() and sched now share the same resources. stop_machine() is faster without wasting any resources and sched migration users are much cleaner. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Josh Triplett <josh@freedesktop.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com>
2010-05-06stop_machine: reimplement using cpu_stopTejun Heo
Reimplement stop_machine using cpu_stop. As cpu stoppers are guaranteed to be available for all online cpus, stop_machine_create/destroy() are no longer necessary and removed. With resource management and synchronization handled by cpu_stop, the new implementation is much simpler. Asking the cpu_stop to execute the stop_cpu() state machine on all online cpus with cpu hotplug disabled is enough. stop_machine itself doesn't need to manage any global resources anymore, so all per-instance information is rolled into struct stop_machine_data and the mutex and all static data variables are removed. The previous implementation created and destroyed RT workqueues as necessary which made stop_machine() calls highly expensive on very large machines. According to Dimitri Sivanich, preventing the dynamic creation/destruction makes booting faster more than twice on very large machines. cpu_stop resources are preallocated for all online cpus and should have the same effect. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com>
2010-05-06cpu_stop: implement stop_cpu[s]()Tejun Heo
Implement a simplistic per-cpu maximum priority cpu monopolization mechanism. A non-sleeping callback can be scheduled to run on one or multiple cpus with maximum priority monopolozing those cpus. This is primarily to replace and unify RT workqueue usage in stop_machine and scheduler migration_thread which currently is serving multiple purposes. Four functions are provided - stop_one_cpu(), stop_one_cpu_nowait(), stop_cpus() and try_stop_cpus(). This is to allow clean sharing of resources among stop_cpu and all the migration thread users. One stopper thread per cpu is created which is currently named "stopper/CPU". This will eventually replace the migration thread and take on its name. * This facility was originally named cpuhog and lived in separate files but Peter Zijlstra nacked the name and thus got renamed to cpu_stop and moved into stop_machine.c. * Better reporting of preemption leak as per Peter's suggestion. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com>
2010-02-17percpu: add __percpu sparse annotations to core kernel subsystemsTejun Heo
Add __percpu sparse annotations to core subsystems. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-mm@kvack.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biederman <ebiederm@xmission.com>
2009-03-30cpumask: remove cpumask_t from coreRusty Russell
Impact: cleanup struct cpumask is nicer, and we use it to make where we've made code safe for CONFIG_CPUMASK_OFFSTACK=y. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-02-20alloc_percpu: change percpu_ptr to per_cpu_ptrRusty Russell
Impact: cleanup There are two allocated per-cpu accessor macros with almost identical spelling. The original and far more popular is per_cpu_ptr (44 files), so change over the other 4 files. tj: kill percpu_ptr() and update UP too Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: mingo@redhat.com Cc: lenb@kernel.org Cc: cpufreq@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-05stop_machine: introduce stop_machine_create/destroy.Heiko Carstens
Introduce stop_machine_create/destroy. With this interface subsystems that need a non-failing stop_machine environment can create the stop_machine machine threads before actually calling stop_machine. When the threads aren't needed anymore they can be killed with stop_machine_destroy again. When stop_machine gets called and the threads aren't present they will be created and destroyed automatically. This restores the old behaviour of stop_machine. This patch also converts cpu hotplug to the new interface since it is special: cpu_down calls __stop_machine instead of stop_machine. However the kstop threads will only be created when stop_machine gets called. Changing the code so that the threads would be created automatically on __stop_machine is currently not possible: when __stop_machine gets called we hold cpu_add_remove_lock, which is the same lock that create_rt_workqueue would take. So the workqueue needs to be created before the cpu hotplug code locks cpu_add_remove_lock. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01cpumask: convert rest of files in kernel/Rusty Russell
Impact: Reduce stack usage, use new cpumask API. Mainly changing cpumask_t to 'struct cpumask' and similar simple API conversion. Two conversions worth mentioning: 1) we use cpumask_any_but to avoid a temporary in kernel/softlockup.c, 2) Use cpumask_var_t in taskstats_user_cmd(). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com>
2008-11-16stop_machine: fix race with return value (fixes Bug #11989)Rusty Russell
Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-25Revert "Call init_workqueues before pre smp initcalls."Linus Torvalds
This reverts commit a802dd0eb5fc97a50cf1abb1f788a8f6cc5db635 by moving the call to init_workqueues() back where it belongs - after SMP has been initialized. It also moves stop_machine_init() - which needs workqueues - to a later phase using a core_initcall() instead of early_initcall(). That should satisfy all ordering requirements, and was apparently the reason why init_workqueues() was moved to be too early. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-22stop_machine: fix error code handling on multiple cpusHeiko Carstens
Using |= for updating a value which might be updated on several cpus concurrently will not always work since we need to make sure that the update happens atomically. To fix this just use a write if the called function returns an error code on a cpu. We end up writing the error code of an arbitrary cpu if multiple ones fail but that should be sufficient. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-22stop_machine: use workqueues instead of kernel threadsHeiko Carstens
Convert stop_machine to a workqueue based approach. Instead of using kernel threads for stop_machine we now use a an rt workqueue to synchronize all cpus. This has the advantage that all needed per cpu threads are already created when stop_machine gets called. And therefore a call to stop_machine won't fail anymore. This is needed for s390 which needs a mechanism to synchronize all cpus without allocating any memory. As Rusty pointed out free_module() needs a non-failing stop_machine interface as well. As a side effect the stop_machine code gets simplified. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-12stop_machine: remove unused variableLi Zefan
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-28stop_machine(): stop_machine_run() changed to use cpu maskRusty Russell
Instead of a "cpu" arg with magic values NR_CPUS (any cpu) and ~0 (all cpus), pass a cpumask_t. Allow NULL for the common case (where we don't care which CPU the function is run on): temporary cpumask_t's are usually considered bad for stack space. This deprecates stop_machine_run, to be removed soon when all the callers are dead. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-28Simplify stop_machineRusty Russell
stop_machine creates a kthread which creates kernel threads. We can create those threads directly and simplify things a little. Some care must be taken with CPU hotunplug, which has special needs, but that code seems more robust than it was in the past. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-07-28stop_machine: add ALL_CPUS optionJason Baron
-allow stop_mahcine_run() to call a function on all cpus. Calling stop_machine_run() with a 'ALL_CPUS' invokes this new behavior. stop_machine_run() proceeds as normal until the calling cpu has invoked 'fn'. Then, we tell all the other cpus to call 'fn'. Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Adrian Bunk <bunk@stusta.de> CC: Andi Kleen <andi@firstfloor.org> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: Christoph Hellwig <hch@infradead.org> CC: mingo@elte.hu CC: akpm@osdl.org
2008-07-18cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptrMike Travis
* This patch replaces the dangerous lvalue version of cpumask_of_cpu with new cpumask_of_cpu_ptr macros. These are patterned after the node_to_cpumask_ptr macros. In general terms, if there is a cpumask_of_cpu_map[] then a pointer to the cpumask_of_cpu_map[cpu] entry is used. The cpumask_of_cpu_map is provided when there is a large NR_CPUS count, reducing greatly the amount of code generated and stack space used for cpumask_of_cpu(). The pointer to the cpumask_t value is needed for calling set_cpus_allowed_ptr() to reduce the amount of stack space needed to pass the cpumask_t value. If there isn't a cpumask_of_cpu_map[], then a temporary variable is declared and filled in with value from cpumask_of_cpu(cpu) as well as a pointer variable pointing to this temporary variable. Afterwards, the pointer is used to reference the cpumask value. The compiler will optimize out the extra dereference through the pointer as well as the stack space used for the pointer, resulting in identical code. A good example of the orthogonal usages is in net/sunrpc/svc.c: case SVC_POOL_PERCPU: { unsigned int cpu = m->pool_to[pidx]; cpumask_of_cpu_ptr(cpumask, cpu); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask); return 1; } case SVC_POOL_PERNODE: { unsigned int node = m->pool_to[pidx]; node_to_cpumask_ptr(nodecpumask, node); *oldmask = current->cpus_allowed; set_cpus_allowed_ptr(current, nodecpumask); return 1; } Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23sched: add new API sched_setscheduler_nocheck: add a flag to control access ↵Rusty Russell
checks Hidehiro Kawai noticed that sched_setscheduler() can fail in stop_machine: it calls sched_setscheduler() from insmod, which can have CAP_SYS_MODULE without CAP_SYS_NICE. Two cases could have failed, so are changed to sched_setscheduler_nocheck: kernel/softirq.c:cpu_callback() - CPU hotplug callback kernel/stop_machine.c:__stop_machine_run() - Called from various places, including modprobe() Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Cc: sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-23stop_machine: make stop_machine_run more virtualization friendlyChristian Borntraeger
On kvm I have seen some rare hangs in stop_machine when I used more guest cpus than hosts cpus. e.g. 32 guest cpus on 1 host cpu triggered the hang quite often. I could also reproduce the problem on a 4 way z/VM host with a 64 way guest. It turned out that the guest was consuming all available cpus mostly for spinning on scheduler locks like rq->lock. This is expected as the threads are calling yield all the time. The problem is now, that the host scheduling decisings together with the guest scheduling decisions and spinlocks not being fair managed to create an interesting scenario similar to a live lock. (Sometimes the hang resolved itself after some minutes) Changing stop_machine to yield the cpu to the hypervisor when yielding inside the guest fixed the problem for me. While I am not completely happy with this patch, I think it causes no harm and it really improves the situation for me. I used cpu_relax for yielding to the hypervisor, does that work on all architectures? p.s.: If you want to reproduce the problem, cpu hotplug and kprobes use stop_machine_run and both triggered the problem after some retries. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-04-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits) DOC: A couple corrections and clarifications in USB doc. Generate a slightly more informative error msg for bad HZ fix typo "is" -> "if" in Makefile ext*: spelling fix prefered -> preferred DOCUMENTATION: Use newer DEFINE_SPINLOCK macro in docs. KEYS: Fix the comment to match the file name in rxrpc-type.h. RAID: remove trailing space from printk line DMA engine: typo fixes Remove unused MAX_NODES_SHIFT MAINTAINERS: Clarify access to OCFS2 development mailing list. V4L: Storage class should be before const qualifier (sn9c102) V4L: Storage class should be before const qualifier sonypi: Storage class should be before const qualifier intel_menlow: Storage class should be before const qualifier DVB: Storage class should be before const qualifier arm: Storage class should be before const qualifier ALSA: Storage class should be before const qualifier acpi: Storage class should be before const qualifier firmware_sample_driver.c: fix coding style MAINTAINERS: Add ati_remote2 driver ... Fixed up trivial conflicts in firmware_sample_driver.c
2008-04-21Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Deprecate the asm/semaphore.h files in feature-removal-schedule. Convert asm/semaphore.h users to linux/semaphore.h security: Remove unnecessary inclusions of asm/semaphore.h lib: Remove unnecessary inclusions of asm/semaphore.h kernel: Remove unnecessary inclusions of asm/semaphore.h include: Remove unnecessary inclusions of asm/semaphore.h fs: Remove unnecessary inclusions of asm/semaphore.h drivers: Remove unnecessary inclusions of asm/semaphore.h net: Remove unnecessary inclusions of asm/semaphore.h arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21trivial: small cleanupsPavel Machek
These are small cleanups all over the tree. Trivial style and comment changes to fs/select.c, kernel/signal.c, kernel/stop_machine.c & mm/pdflush.c Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-19generic: use new set_cpus_allowed_ptr functionMike Travis
* Use new set_cpus_allowed_ptr() function added by previous patch, which instead of passing the "newly allowed cpus" cpumask_t arg by value, pass it by pointer: -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask) * Modify CPU_MASK_ALL Depends on: [sched-devel]: sched: add new set_cpus_allowed_ptr function Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-18kernel: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-02-06stopmachine: semaphore to mutexDaniel Walker
[akpm@linux-foundation.org: cleanup] Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-16Fix stop_machine_run problem with naughty real time processSatoru Takeuchi
stop_machine_run() does its work on "kstopmachine" thread having max priority. However that thread get such priority after woken up. Therefore, in the following case ... - "kstopmachine" try to run on CPU1 - There is a real time process which doesn't relinquish CPU time voluntary on CPU1 ... "kstopmachine" can't start to run and the CPU on which stop_machine_run() is runing hangs up. To fix this problem, call sched_setscheduler() before waking up that thread. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11stop_machine() now uses hard_irq_disableBenjamin Herrenschmidt
Add a call to hard_irq_disable() to stop_machine so that we make sure IRQs are really disabled and not only lazy-disabled on archs like powerpc as some users of stop_machine() may rely on that. [akpm@linux-foundation.org: build fix] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>