path: root/include/scsi
AgeCommit message (Collapse)Author
2013-03-25libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to fcoe and libfc)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits) [SCSI] ufs: Separate PCI code into glue driver [SCSI] ufs: Segregate PCI Specific Code [SCSI] scsi: fix lpfc build when wmb() is defined as mb() [SCSI] storvsc: Handle dynamic resizing of the device [SCSI] storvsc: Restructure error handling code on command completion [SCSI] storvsc: avoid usage of WRITE_SAME [SCSI] aacraid: suppress two GCC warnings [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one [SCSI] dc395x: uninitialized variable in device_alloc() [SCSI] Fix range check in scsi_host_dif_capable() [SCSI] storvsc: Initialize the sglist [SCSI] mpt2sas: Add support for OEM specific controller [SCSI] ipr: Fix oops while resetting an ipr adapter [SCSI] fnic: Fnic Trace Utility [SCSI] fnic: New debug flags and debug log messages [SCSI] fnic: fnic driver may hit BUG_ON on device reset ...
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01Merge tag 'uapi-20121219' into for-linusJames Bottomley
UAPI Disintegration 2012-12-19 This is the remaining SCSI part of the UAPI Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24[SCSI] Fix range check in scsi_host_dif_capable()Martin K. Petersen
The range checking from fe542396 was bad. We would still end up walking beyond the array as Type 3 is defined to be 4 in the protection bitmask. Instead use ARRAY_SIZE() for the range check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-25[SCSI] remove can_power_off flag from scsi_deviceAaron Lu
Commit 166a2967b45ede2e2e56f3ede3cd32053dc17812 "libata: tell scsi layer device supports runtime power off" introduced the can_power_off flag for scsi_device and is used to support ZPODD implementation in SCSI layer. Since ZPODD is now implemented in ATA layer, that flag is no longer needed, so remove it. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25[libata] scsi: no poll when ODD is powered offAaron Lu
When the ODD is powered off, any action the user did to the ODD that would generate a media event will trigger an ACPI interrupt, so the poll for media event is no longer necessary. And the poll will also cause a runtime status change, which will stop the ODD from staying in powered off state, so the poll should better be stopped. But since we don't have access to the gendisk structure in LLDs, here comes the disk_events_disable_depth for scsi device. This field is a hint set by LLDs to convey information to upper layer drivers. A value of 0 means media poll is necessary for the device, while values above 0 means media poll is not needed and should better be skipped. So we can increase its value when we are to power off the ODD in ATA layer and decrease its value when the ODD is powered on, effectively silence the media events poll. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-07UAPI: (Scripted) Disintegrate include/scsi/fcDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-19UAPI: (Scripted) Disintegrate include/scsiDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: add support to the get_netdev() for fcoe_interfaceYi Zou
Adds support to fcoe_port's newly added get_netdev fucntion pointer. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: prep work to start consolidate the usage of fcoe_netdevYi Zou
Currently, in the default kernel fcoe driver, it is needed to get to the underlying private per fcoe transport's private structure, e.g., fcoe_interface in fcoe.ko, and returns the associated netdev. The similar logic exists in other fcoe drivers, e.g., bnx2fc, so we add a function pointer into the common fcoe_port struct to allow individual fcoe transport implementaion (fcoe and bnx2fc) to get the corresponding netdev associated with a give lport. Then a inline fcoe_get_netdev() is added as part of libfcoe for all underlying fcoe transport drivers to use regardless of its individual fcoe transport driver, and also allows move more common code such as fcoe_link_speed_update or fcoe_ctlr_get_lesb to be in libfcoe, rather than specific to fcoe. This patch is a prep work that adds aforementioned fucntion pointer, and followed by the actual code changes to make use of it. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This patch set includes two large new drivers: mpt3sas (for the next gen fusion SAS hardware) and csiostor a FCoE offload driver for the Chelsio converged network cards (this includes some net changes which I've OK'd with DaveM). The rest of the patch is driver updates (qla2xxx, lpfc, hptiop, be2iscsi) plus a few assorted updates and bug fixes. We also have a Power Management rework in the Upper Layer Drivers preparatory to doing ACPI zero power optical devices, but the actual enabler is still being worked on. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits) [SCSI] mpt3sas: add new driver supporting 12GB SAS [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222) [SCSI] csiostor: remove unneeded memset() [SCSI] csiostor: Fix sparse warnings. [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode. [SCSI] qla2xxx: Dont clear drv active on iospace config failure. [SCSI] qla2xxx: Fix typo in qla2xxx driver. [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option. [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport. [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability. [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed. [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset. [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set. [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function. [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message. [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level. [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin. [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response. ...
2012-12-13Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband upate from Roland Dreier: "First batch of InfiniBand/RDMA changes for the 3.8 merge window: - A good chunk of Bart Van Assche's SRP fixes - UAPI disintegration from David Howells - mlx4 support for "64-byte CQE" hardware feature from Or Gerlitz - Other miscellaneous fixes" Fix up trivial conflict in mellanox/mlx4 driver. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (33 commits) RDMA/nes: Fix for crash when registering zero length MR for CQ RDMA/nes: Fix for terminate timer crash RDMA/nes: Fix for BUG_ON due to adding already-pending timer IB/srp: Allow SRP disconnect through sysfs srp_transport: Document sysfs attributes srp_transport: Simplify attribute initialization code srp_transport: Fix attribute registration IB/srp: Document sysfs attributes IB/srp: send disconnect request without waiting for CM timewait exit IB/srp: destroy and recreate QP and CQs when reconnecting IB/srp: Eliminate state SRP_TARGET_DEAD IB/srp: Introduce the helper function srp_remove_target() IB/srp: Suppress superfluous error messages IB/srp: Process all error completions IB/srp: Introduce srp_handle_qp_err() IB/srp: Simplify SCSI error handling IB/srp: Keep processing commands during host removal IB/srp: Eliminate state SRP_TARGET_CONNECTING IB/srp: Increase block layer timeout RDMA/cm: Change return value from find_gid_port() ...
2012-12-01[SCSI] scsi_transport_sas: add 12GB definitions for mpt3sasSreekanth Reddy
[jejb: split this core change into a separate patch] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30IB/srp: Allow SRP disconnect through sysfsBart Van Assche
Make it possible to disconnect the IB RC connection used by the SRP protocol to communicate with a target. Have the SRP transport layer create a sysfs "delete" attribute for initiator drivers that support this functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-27[SCSI] sd: Use SCSI read/write(16) with > 32-bit LBA drivesJason J. Herne
Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands when a large capacity drive is installed. This issue was reported and discussed here: http://marc.info/?l=linux-usb&m=135247705222324 Signed-off-by: Jason J. Herne <hernejj@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13[SCSI] sd: Implement support for WRITE SAMEMartin K. Petersen
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13[SCSI] Add a report opcode helperMartin K. Petersen
The REPORT SUPPORTED OPERATION CODES command can be used to query whether a given opcode is supported by a device. Add a helper function that allows us to look up commands. We only issue RSOC if the device reports compliance with SPC-3 or later. But to err on the side of caution we disable the command for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull misc SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for megaraid_sas, lpfc, bfi and mvumi. It also includes some fairly major fixes for virtio-scsi (scatterlist init), scsi_debug (off by one error), storvsc (use after free) and qla2xxx (potential deadlock). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits) [SCSI] storvsc: Account for in-transit packets in the RESET path [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lock [SCSI] scsi_debug: Fix off-by-one bug when unmapping region [SCSI] Shorten the path length of scsi_cmd_to_driver() [SCSI] virtio-scsi: support online resizing of disks [SCSI] virtio-scsi: fix LUNs greater than 255 [SCSI] virtio-scsi: initialize scatterlist structure [SCSI] megaraid_sas: Version, Changelog, Copyright update [SCSI] megaraid_sas: Remove duplicate code [SCSI] megaraid_sas: Add SystemPD FastPath support [SCSI] megaraid_sas: Add array boundary check for SystemPD [SCSI] megaraid_sas: Load io_request DataLength in bytes [SCSI] megaraid_sas: Add module param for configurable MSI-X vector count [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock calls [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 HBA ports [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errors ...
2012-10-09[SCSI] Shorten the path length of scsi_cmd_to_driver()Li Zhong
This patch tries to shorten the path length of scsi_cmd_to_driver(). As only REQ_TYPE_BLOCK_PC commands can be submitted without a driver, so we could avoid the related NULL checking, as long as we make sure we don't use it for REQ_TYPE_BLOCK_PC type commands. Plus, this fixes a bug where you get different behaviors from REQ_TYPE_BLOCK_PC commands when a driver is and isn't attached. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] libfc: fix lun reset failure bugs in fc_fcp_resp handling of FCP_RSP_INFOYi Zou
In LUN RESET testing involving NetApp targets, it is observed that LUN RESET is failing. The fc_fcp_resp() is not completing the completion for the LUN RESET task since fc_fcp_resp assumes that the FCP_RSP_INFO is 8 bytes with the 4 byte reserved field, where in case of NetApp targets the FCP_RSP to LUN RESET only has 4 bytes of FCP_RSP_INFO. This leads fc_fcp_resp to error out w/o completing the task completion, eventually causing LUN RESET to be escalated to host reset, which is not very nice. Per FCP-3 r04, clause 9.5.15 and Table 23, the FCP_RSP_INFO field can be either 4 bytes or 8 bytes, with the last 4 bytes as "Reserved (if any)". Therefore it is valid to have 4 bytes FCP_RSP_INFO like some of the NetApp targets behave. Fixing this by validating the FCP_RSP_INFO against both the two spec allowed length. Reported-by: Frank Zhang <frank_1.zhang@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] fcoe: Fix write errors on NPIV portsNeerav Parikh
SCSI errors were generated while writing to LUNs connected via NPIV ports. Debugging this it was found that the FCoE packets transmitted via the NPIV ports were not tagged with correct user priority as negotiated with peer by DCB agent. This resulted in FCoE traffic going with priority zero(0) that did not have priority flow control (PFC) enabled for it. The initiator after transferring data to the target never saw any reply indicating the transfer was complete. This resulted in error recovery (ABTS) and SCSI command retries by the scsi-mid layer; eventually resulting in I/O errors. This patch fixes this issue by keeping the FCoE user priority information in the fcoe_interface instance that is common for both the physical port as well as NPIV ports connected to that physical port; instead of storing it in fcoe_port structure that has a per port instance. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-03Merge tag 'uapi-prep-20121002' of ↵Linus Torvalds
git://git.infradead.org/users/dhowells/linux-headers Pull preparatory patches for user API disintegration from David Howells: "The patches herein prepare for the extraction of the Userspace API bits from the various header files named in the Kbuild files. New subdirectories are created under either include/uapi/ or arch/x/include/uapi/ that correspond to the subdirectory containing that file under include/ or arch/x/include/. The new subdirs under the uapi/ directory are populated with Kbuild files that mostly do nothing at this time. Further patches will disintegrate the headers in each original directory and fill in the Kbuild files as they do it. These patches also: (1) fix up #inclusions of "foo.h" rather than <foo.h>. (2) Remove some redundant #includes from the DRM code. (3) Make the kernel build infrastructure handle Kbuild files both in the old places and the new UAPI place that both specify headers to be exported. (4) Fix some kernel tools that #include kernel headers during their build. I have compile tested this with allyesconfig against x86_64, allmodconfig against i386 and a scattering of additional defconfigs of other arches. Prepared for main script Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>" * tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Plumb the UAPI Kbuilds into the user header installation and checking UAPI: x86: Differentiate the generated UAPI and internal headers UAPI: Remove the objhdr-y export list UAPI: Move linux/version.h UAPI: Set up uapi/asm/Kbuild.asm UAPI: x86: Fix insn_sanity build failure after UAPI split UAPI: x86: Fix the test_get_len tool UAPI: (Scripted) Set up UAPI Kbuild files UAPI: Partition the header include path sets and add uapi/ header directories UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/. UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel ↵David Howells
system headers Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-24[SCSI] sd: Ensure we correctly disable devices with unknown protection typeMartin K. Petersen
We set the capacity to zero when we discovered a device formatted with an unknown DIF protection type. However, the read_capacity code would override the capacity and cause the device to be enabled regardless. Make sd_read_protection_type() return an error if the protection type is unknown. Also prevent duplicate printk lines when the device is being revalidated. Reported-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] fc-transport: Remove unnecessary includeRobert Love
This header file is included in user space applications that are doing "FC Passthrough." This include causes them to also include scsi/scsi.h. Since this header file doesn't actually need scsi/scsi.h, remove the include line. This patch was tested with 'make allyesconfig'. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] Disable DIF on Hitachi Ultrastar 15K300Martin K. Petersen
Hitachi Ultrastar 15K300 is quirky. Disable T10 PI (DIF). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-13scsi_netlink: Remove dead and buggy codeEric W. Biederman
The scsi netlink code confuses the netlink port id with a process id, going so far as to read NETLINK_CREDS(skb)->pid instead of the correct NETLINK_CB(skb).pid. Fortunately it does not matter because nothing registers to respond to scsi netlink requests. The only interesting use of the scsi_netlink interface is fc_host_post_vendor_event which sends a netlink multicast message. Since nothing registers to handle scsi netlink messages kill all of the registration logic, while retaining the same error handling behavior preserving the userspace visible behavior and removing all of the confused code that thought a netlink port id was a process id. This was tested with a kernel allyesconfig build which had no problems. Cc: James Bottomley <James.Bottomley@parallels.com> Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24[SCSI] libsas: suspend / resume supportDan Williams
libsas power management routines to suspend and recover the sas domain based on a model where the lldd is allowed and expected to be "forgetful". sas_suspend_ha - disable event processing allowing the lldd to take down links without concern for causing hotplug events. Regardless of whether the lldd actually posts link down messages libsas notifies the lldd that all domain_devices are gone. sas_prep_resume_ha - on the way back up before the lldd starts link training clean out any spurious events that were generated on the way down, and re-enable event processing sas_resume_ha - after the lldd has started and decided that all phys have posted link-up events this routine is called to let libsas start it's own timeout of any phys that did not resume. After the timeout an lldd can cancel the phy teardown by posting a link-up event. Storage for ex_change_count (u16) and phy_change_count (u8) are changed to int so they can be set to -1 to indicate 'invalidated'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-07-20[SCSI] cleanup usages of scsi_complete_async_scansDan Williams
Now that scsi registers its async scan work with the async subsystem, wait_for_device_probe() is sufficient for ensuring all scanning is complete. [jejb: fix merge problems with eea03c20ae38 Make wait_for_device_probe() also do scsi_complete_async_scans()] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] set to WCE if usb cache quirk is present.Namjae Jeon
Make use of USB quirk method to identify such HDD while reading the cache status in sd_probe(). If cache quirk is present for the HDD, lets assume that cache is enabled and make WCE bit equal to 1. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: trim sas_task of slow path infrastructureDan Williams
The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu <yuxiangl@marvell.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: drop sata port multiplier infrastructureDan Williams
On the way to add a new sata_device field, noticed that libsas is carrying port multiplier infrastructure that is explicitly disabled by sas_discover_sata(). The aic94xx touches the unused port_no, so leave that field in case there was some use for it. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: add sas_eh_abort_handlerDan Williams
When recovering failed eh-cmnds let the lldd attempt an abort via scsi_abort_eh_cmnd before escalating. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: enforce eh strategy handlers only in eh contextDan Williams
The strategy handlers may be called in places that are problematic for libsas (i.e. sata resets outside of domain revalidation filtering / libata link recovery), or problematic for userspace (non-blocking ioctl to sleeping reset functions). However, these routines are also called for eh escalations and recovery of scsi_eh_prep_cmnd(), so permit them as long as we are running in the host's error handler, otherwise arrange for them to be triggered in eh_context. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libata, libsas: introduce sched_eh and end_eh port opsDan Williams
When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh: add scsi_dh_attached_handler_nameMike Snitzer
Introduce scsi_dh_attached_handler_name() to retrieve the name of the scsi_dh that is attached to the scsi_device associated with the provided request queue. Returns NULL if a scsi_dh is not attached. Also, fix scsi_dh_{attach,detach} function header comments to document @q rather than @sdev. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Babu Moger <babu.moger@netapp.com> Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] scsi_dh_alua: implement 'implied transition timeout'Rob Evers
During alua transitions, an array can return transitioning status in response to rtpg requests. These requests get retried for a maximum of 60 seconds by default before timing out. Sometimes this timeout isn't sufficient to allow the array to complete the transition. T10-spc4 addresses this under 'Report Target Port Groups' command. This update retrieves the timeout value from the storage array if available and retries the transitioning rtpgs for up to the 'implied transitioning timeout' value Signed-off-by: Rob Evers <revers@redhat.com> Reviewed-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] core, classes, mpt2sas: have scsi_internal_device_unblock take new stateMike Christie
This has scsi_internal_device_unblock/scsi_target_unblock take the new state to set the devices as an argument instead of always setting to running. The patch also converts users of these functions. This allows the FC and iSCSI class to transition devices from blocked to transport-offline, so that when fast_io_fail/replacement_timeout has fired we do not set the devices back to running. Instead, we set them to SDEV_TRANSPORT_OFFLINE. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] add new SDEV_TRANSPORT_OFFLINE stateMike Christie
This patch adds a new state SDEV_TRANSPORT_OFFLINE. It will be used by transport classes to offline devices for cases like when the fast_io_fail/recovery_tmo fires. In those cases we want all IO to fail, and we have not yet escalated to dev_loss_tmo behavior where we are removing the devices. Currently to handle this state, transport classes are setting the scsi_device's state to running, setting their internal session/port structs state to something that indicates failed, and then failing IO from some transport check in the queuecommand. The reason for the new value is so that users can distinguish between a device failure that is a result of a transport problem vs the wide range of errors that devices get offlined for when a scsi command times out and we offline the devices there. It also fixes the confusion as to why the transport class is failing IO, but has set the device state from blocked to running. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: update fcp and exch statsVasu Dev
Updates newly added stats from fc_get_host_stats, added new function fc_exch_update_stats to update exches related stats from fc_exch.c by going thru internal ema_list elements. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc: adds FCP failures statsVasu Dev
Adds stats to track FCP pkt and frame alloc failure. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc, fcoe, bnx2fc: cleanup fcoe_dev_statsVasu Dev
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] fc: add some more FC specific stats to fc_hostVasu Dev
The libfc provides more flexibility and with that we can monitor some more FC specific stats for FC exches or FCP error cases, this patch add such new FC stats. The patch adds *only* FC specific new stats to existing fc_host attribute container. Added stats names are self explanatory as existing FC stats already has, however anyway still added commentary along their definition to describe them. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>