aboutsummaryrefslogtreecommitdiff
path: root/include/linux/i2c-omap.h
AgeCommit message (Collapse)Author
2012-11-28i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flagShubhrajyoti D
The OMAP_I2C_FLAG_RESET_REGS_POSTIDLE is not used anymore in the i2c driver. Remove the flag. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-14ARM: i2c: omap: Remove the i207 errata flagShubhrajyoti D
The commit [i2c: omap: use revision check for OMAP_I2C_FLAG_APPLY_ERRATA_I207] uses the revision id instead of the flag. So the flag can be safely removed. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-14Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"Paul Walmsley
This reverts commit 3db11feffc1ad2ab9dea27789e6b5b3032827adc (ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints). This commit causes I2C timeouts to appear on several OMAP3430/3530-based boards: http://marc.info/?l=linux-arm-kernel&m=135071372426971&w=2 http://marc.info/?l=linux-arm-kernel&m=135067558415214&w=2 http://marc.info/?l=linux-arm-kernel&m=135216013608196&w=2 and appears to have been sent for merging before one of its prerequisites was merged: http://marc.info/?l=linux-arm-kernel&m=135219411617621&w=2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-10-06ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraintsJean Pihet
Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat API to the new PM QoS API. Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY class of PM QoS. The resulting MPU constraints are used by cpuidle to decide the next power state of the MPU subsystem. The I2C device latency timing is derived from the FIFO size and the clock speed and so is applicable to all OMAP SoCs. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2011-10-29I2C: OMAP: remove unused function pointers from pdataKevin Hilman
Now that this driver is using runtime PM, there is no longer a need for the idle/enable/shutdown function pointers in pdata. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP1/OMAP2+: add flags field to omap i2c platform dataAndy Green
OMAP I2C driver can access the configuration flags through its platform data. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29I2C: OMAP: add rev to omap i2c platform dataAndy Green
We need to pass the I2C IP revision from the hwmod class up into the OMAP I2C driver, which does not have direct access to it. This adds a member to the platform data the OMAP I2C driver does use already to hold the I2C IP revision. Cc: patches@linaro.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-07-10I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... testAndy Green
These represent the 8 kinds of implementation functionality that up until now were inferred by the 16 remaining cpu_...() tests in the omap i2c driver. Changed to use BIT() as suggested by Balaji T Krishnamoorthy. Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10I2C: OMAP2+: Introduce I2C IP versioning constantsAndy Green
These represent the two kinds of (incompatible) OMAP I2C peripheral unit in use so far. The constants are in linux/i2c-omap.h so the omap i2c driver can have them too. Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-11-09OMAP: I2C: split device registration and convert OMAP2+ to omap_devicePaul Walmsley
Split the OMAP1 and OMAP2+ platform_device build and register code. Convert the OMAP2+ variant to use omap_device. This patch was developed in collaboration with Rajendra Nayak <rnayak@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20i2c-omap: add mpu wake up latency constraint in i2cKalle Jokiniemi
While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>