aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-11-01Merge tag 'usb-3.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a set of patches that revert all of the changes done to the pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out they break some devices that work just fine on 3.11. As it's not a good idea to break working systems, drop them all and they will be reworked for future kernel versions such that there is no breakage. I've also included a MAINTAINERS update for the USB serial subsystem and a new device id for the ftdi_sio driver as well" * tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ftdi_sio: add id for Z3X Box device USB: Maintainers change for usb serial drivers Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type" Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method" Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method" Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates" Revert "usb: pl2303: move the two baud rate encoding methods to separate functions" Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method" Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips" Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips" Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()" Revert "pl2303: improve the chip type information output on startup" Revert "pl2303: improve the chip type detection/distinction" Revert "USB: pl2303: distinguish between original and cloned HX chips"
2013-11-01Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock subsystem fixes from Mike Turquette. * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: fixup argument order when setting VCO parameters clk: socfpga: Fix incorrect sdmmc clock name clk: armada-370: fix tclk frequencies clk: nomadik: set all timers to use 2.4 MHz TIMCLK
2013-11-01USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "USB: pl2303: restrict the divisor based baud rate encoding method to ↵Greg Kroah-Hartman
the "HX" chip type" This reverts commit b8bdad608213caffa081a97d2e937e5fe08c4046. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"Greg Kroah-Hartman
This reverts commit 57ce61aad748ceaa08c859da04043ad7dae7c15e. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: do not round to the next nearest standard baud rate for ↵Greg Kroah-Hartman
the divisor based baud rate encoding method" This reverts commit 75417d9f99f89ab241de69d7db15af5842b488c4. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"Greg Kroah-Hartman
This reverts commit b9208c721ce736125fe58d398319513a27850fd8. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: move the two baud rate encoding methods to separate ↵Greg Kroah-Hartman
functions" This reverts commit e917ba01d69ad705a4cd6a6c77538f55d84f5907. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: increase the allowed baud rate range for the divisor ↵Greg Kroah-Hartman
based encoding method" This reverts commit b5c16c6a031c52cc4b7dda6c3de46462fbc92eab. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: also use the divisor based baud rate encoding method ↵Greg Kroah-Hartman
for baud rates < 115200 with HX chips" This reverts commit 61fa8d694b8547894b57ea0d99d0120a58f6ebf8. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: add two comments concerning the supported baud rates ↵Greg Kroah-Hartman
with HX chips" This reverts commit c23bda365dfbf56aa4d6d4a97f83136c36050e01. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: simplify the else-if contruct for type_1 chips in ↵Greg Kroah-Hartman
pl2303_startup()" This reverts commit 73b583af597542329e6adae44524da6f27afed62. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: improve the chip type information output on startup"Greg Kroah-Hartman
This reverts commit a77a8c23e4db9fb1f776147eda0d85117359c700. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: improve the chip type detection/distinction"Greg Kroah-Hartman
This reverts commit 034d1527adebd302115c87ef343497a889638275. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "USB: pl2303: distinguish between original and cloned HX chips"Greg Kroah-Hartman
This reverts commit 7d26a78f62ff4fb08bc5ba740a8af4aa7ac67da4. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-31i915: fix compiler warningLinus Torvalds
The last i915 drm update brought with it this annoying warning drivers/gpu/drm/i915/intel_crt.c: In function ‘intel_crt_get_config’: drivers/gpu/drm/i915/intel_crt.c:110:21: warning: unused variable ‘dev’ [-Wunused-variable] struct drm_device *dev = encoder->base.dev; ^ introduced by commit 7195a50b5c7e ("drm/i915: Add HSW CRT output readout support"). Remove the offending pointless variable. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bit later than I would want, but the changes are very minor - a few new device IDs for new hardware in existing drivers, fix for battery in Wacom devices not be considered system battery and cause emergency hibernations, and a couple of other bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - add support for model found on Dell XT2 Input: wacom - add support for ISDv4 0x10E sensor Input: wacom - add support for ISDv4 0x10F sensor Input: wacom - export battery scope Input: cm109 - convert high volume dev_err() to dev_err_ratelimited() Input: move name/timer init to input_alloc_dev() Input: i8042 - i8042_flush fix for a full 8042 buffer Input: pxa27x_keypad - fix NULL pointer dereference
2013-10-31Merge tag 'pm+acpi-3.12-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael J Wysocki: "Last-minute ACPI and power management fixes for 3.12 - Revert epoll and select commits related to the freezer, introduced during the 3.11 cycle, that cause mysterious user space breakage to occur during resume from suspend to RAM for multiple users of 32-bit x86 systems. Material for 3.11.y stable kernels. - Revert a recent ACPI-based PCI hotplug (ACPIPHP) commit that was part of boot problem fixes for one machine, but turns out to cause issues with hotplug on Thunderbolt chains with multiple devices. It also turns out to be unnecessary after another fix in the same area that went in later. From Mika Westerberg" * tag 'pm+acpi-3.12-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies" Revert "select: use freezable blocking call" Revert "epoll: use freezable blocking call"
2013-10-31Input: ALPS - add support for model found on Dell XT2Yunkang Tang
This patch adds support for touchpad found on Dell XT2. It's a dual device with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2". Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a few small fixes for radeon (audio regression fix, stability fix, and an endian bug noticed by coverity). * 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: fix incompatible casting on big endian drm/radeon: disable bapm on KB drm/radeon: use sw CTS/N values for audio on DCE4+
2013-10-30Merge tag 'tty-3.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fixes from Greg KH: "Here are 3 tiny fixes that are needed for 3.12-final for some serial drivers. One of them is a revert of a broken patch, and two others are fixes for reported bugs. All of these have been in linux-next for a while, I forgot I had not sent them to you yet, my fault" (Actually, Greg, you _had_ sent two of the three, so this pulls in just one actual new fix) * tag 'tty-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty/serial: at91: fix uart/usart selection for older products
2013-10-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Mainly Intel regression fixes and quirks, along with a simple one liner to fix rendernodes ioctl access (off by default, but testers want to test it)" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: allow DRM_IOCTL_VERSION on render-nodes drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb drm/i915: No LVDS hardware on Intel D410PT and D425KT drm/i915/dp: workaround BIOS eDP bpp clamping issue drm/i915: Add HSW CRT output readout support drm/i915: Add support for pipe_bpp readout
2013-10-30Staging: sb105x: info leak in mp_get_count()Dan Carpenter
The icount.reserved[] array isn't initialized so it leaks stack information to userspace. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Staging: bcm: info leak in ioctlDan Carpenter
The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel information to user space. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30staging: wlags49_h2: buffer overflow setting station nameDan Carpenter
We need to check the length parameter before doing the memcpy(). I've actually changed it to strlcpy() as well so that it's NUL terminated. You need CAP_NET_ADMIN to trigger these so it's not the end of the world. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30aacraid: missing capable() check in compat ioctlDan Carpenter
In commit d496f94d22d1 ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30staging: ozwpan: prevent overflow in oz_cdev_write()Dan Carpenter
We need to check "count" so we don't overflow the ei->data buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"Mika Westerberg
Commit 2dc4128 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) changed the enable_slot() to check return value of pci_scan_slot() and if it is zero return early from the function. It means that there were no new devices in this particular slot. However, if a device appeared deeper in the hierarchy the code now ignores it causing things like Thunderbolt chaining fail to recognize new devices. The problem with Alex Williamson's machine was solved with commit a47d8c8 (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks) and hence we should be able to restore the original functionality that we always rescan on bus check notification. On a device check notification we still check what acpiphp_rescan_slot() returns and on zero bail out early. Fixes: 2dc41281b1d1 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies) Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30drm: allow DRM_IOCTL_VERSION on render-nodesDavid Herrmann
DRM_IOCTL_VERSION is a reliable way to get the driver-name and version information. It's not related to the interface-version (SET_VERSION ioctl) so we can safely enable it on render-nodes. Note that gbm uses udev-BUSID to load the correct mesa driver. However, the VERSION ioctl should be the more reliable way to do this (in case we add new DRM-bus drivers which have no BUSID or similar). Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-30Merge tag 'drm-intel-fixes-2013-10-29' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Regression and warn fixes for i915. * tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb drm/i915: No LVDS hardware on Intel D410PT and D425KT drm/i915/dp: workaround BIOS eDP bpp clamping issue drm/i915: Add HSW CRT output readout support drm/i915: Add support for pipe_bpp readout
2013-10-29Fix a few incorrectly checked [io_]remap_pfn_range() callsLinus Torvalds
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde <nico@ngolde.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.
2013-10-29drm/i915: Fix the PPT fdi lane bifurcate state handling on ivbDaniel Vetter
Originally I've thought that this is leftover hw state dirt from the BIOS. But after way too much helpless flailing around on my part I've noticed that the actual bug is when we change the state of an already active pipe. For example when we change the fdi lines from 2 to 3 without switching off outputs in-between we'll never see the crucial on->off transition in the ->modeset_global_resources hook the current logic relies on. Patch version 2 got this right by instead also checking whether the pipe is indeed active. But that in turn broke things when pipes have been turned off through dpms since the bifurcate enabling is done in the ->crtc_mode_set callback. To address this issues discussed with Ville in the patch review move the setting of the bifurcate bit into the ->crtc_enable hook. That way we won't wreak havoc with this state when userspace puts all other outputs into dpms off state. This also moves us forward with our overall goal to unify the modeset and dpms on paths (which we need to have to allow runtime pm in the dpms off state). Unfortunately this requires us to move the bifurcate helpers around a bit. Also update the commit message, I've misanalyzed the bug rather badly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507 Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four patches that revert functionality introduced in the merge window to sg. The locking changes turned out to introduce this bug: [ 205.372901] [ BUG: lock held when returning to user space! ] [...] [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 The fix is large, so at this late stage we'd like to revert the functionality and start again in the next merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Revert "sg: use rwsem to solve race during exclusive open" [SCSI] Revert "sg: no need sg_open_exclusive_lock" [SCSI] Revert "sg: checking sdp->detached isn't protected when open" [SCSI] Revert "sg: push file descriptor list locking down to per-device locking"
2013-10-28drm/i915: No LVDS hardware on Intel D410PT and D425KTRob Pearce
The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as having LVDS but the hardware is not populated. This patch adds them to the list of such systems. Patch is against 3.11.4 v2: Patch revised to match the D425KT exactly as the D425KTW does have LVDS. According to Intel's documentation, the D410PTL and D410PLTW don't. Signed-off-by: Rob Pearce <rob@flitspace.org.uk> Cc: stable@vger.kernel.org [danvet: Pimp commit message to my liking and add cc: stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28drm/i915/dp: workaround BIOS eDP bpp clamping issueJani Nikula
This isn't a real fix to the problem, but rather a stopgap measure while trying to find a proper solution. There are several laptops out there that fail to light up the eDP panel in UEFI boot mode. They seem to be mostly IVB machines, including but apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot. The difference between UEFI and CSM is that the BIOS provides a different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and 1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz link, and for reasons yet unknown fail to light up the panel. Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with 2.7 GHz link, the eDP panel lights up. So essentially this is a link speed issue, and *not* a bpp clamping issue. The bug raised its head since commit 657445fe8660100ad174600ebfa61536392b7624 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat May 4 10:09:18 2013 +0200 Revert "drm/i915: revert eDP bpp clamping code changes" which started clamping bpp *before* computing the link requirements, and thus affecting the required bandwidth. Clamping after the computations kept the link at 2.7 GHz. Even though the BIOS tells us to use 18 bpp through the VBT, it happily boots up at 24 bpp and 2.7 GHz itself! Use this information to selectively ignore the VBT provided value. We can't ignore the VBT eDP bpp altogether, as there are other laptops that do require the clamping to be used due to EDID reporting higher bpp than the panel can support. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950 Tested-by: Ulf Winkelvos <ulf@winkelvos.de> Tested-by: jkp <jkp@iki.fi> CC: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28drm/i915: Add HSW CRT output readout supportVille Syrjälä
Call intel_ddi_get_config() to get the pipe_bpp settings from DDI. The sync polarity settings from DDI are irrelevant for CRT output, so override them with data from the ADPA register. Note: This is already merged in drm-intel-next-queued as commit 6801c18c0a43386bb44712cbc028a7e05adb9f0d Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Tue Sep 24 14:24:05 2013 +0300 drm/i915: Add HSW CRT output readout support but is required for the following edp bpp bugfix. v2: Extract intel_crt_get_flags() Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691 Tested-by: Qingshuai Tian <qingshuai.tian@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28drm/i915: Add support for pipe_bpp readoutVille Syrjälä
On CTG+ read out the pipe bpp setting from hardware and fill it into pipe config. Also check it appropriately. v2: Don't do the pipe_bpp extraction inside the PCH only code block on ILK+. Avoid the PIPECONF read as we already have read it for the PIPECONF_EANBLE check. Note: This is already in drm-intel-next-queued as commit 42571aefafb1d330ef84eb29418832f72e7dfb4c Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Sep 6 23:29:00 2013 +0300 drm/i915: Add support for pipe_bpp readout but is needed for the following bugfix. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target pending fixes for v3.12-rc7. This includes a number of EXTENDED_COPY related fixes as a result of Thomas and Doug's continuing testing and feedback. Also included is an important vhost/scsi fix that addresses a long standing issue where the 'write' parameter for get_user_pages_fast() was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not for virtio-scsi READs -> DMA_FROM_DEVICE. This resulted in random userspace segfaults and other unpleasantness on KVM host, and unfortunately has been an issue since the initial merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along with two other less critical items" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter target/pscsi: fix return value check target: Fail XCOPY for non matching source + destination block_size target: Generate failure for XCOPY I/O with non-zero scsi_status target: Add missing XCOPY I/O operation sense_buffer iser-target: check device before dereferencing its variable target: Return an error for WRITE SAME with ANCHOR==1 target: Fix assignment of LUN in tracepoints target: Reject EXTENDED_COPY when emulate_3pc is disabled target: Allow non zero ListID in EXTENDED_COPY parameter list target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
2013-10-27Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Here is the late fixes pull request for dmaengine while you fly back from KS. We have a new dmaengine ML hosted by vger so a patch for that along with addition of Dave as driver mainatainer for ioat. Other fixes are memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver by Sergei" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: edma: fix another memory leak dma: edma: Fix memory leak MAINTAINERS: add to ioatdma maintainer list MAINTAINERS: add the new dmaengine mailing list
2013-10-26Merge tag 'pm+acpi-3.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from "These fix two bugs in the intel_pstate driver, a hibernate bug leading to nasty resume failures sometimes and acpi-cpufreq initialization bug that causes problems to happen during module unload when intel_pstate is in use. Specifics: - Fix for rounding errors in intel_pstate causing CPU utilization to be underestimated from Brennan Shacklett. - intel_pstate fix to always use the correct max pstate value when computing the min pstate from Dirk Brandewie. - Hibernation fix for deadlocking resume in cases when the probing of the device containing the image is deferred from Russ Dill. - acpi-cpufreq fix to prevent the module from staying in memory when the driver cannot be registered and then attempting to unregister things that have never been registered on exit" * tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi-cpufreq: Fail initialization if driver cannot be registered PM / hibernate: Move software_resume to late_initcall_sync intel_pstate: Correct calculation of min pstate value intel_pstate: Improve accuracy by not truncating until final result
2013-10-25Merge tag 'for-linus-20131025' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull final mtd fixes from Brian Norris: "A few more last-minute regression fixes, prepared jointly by me and David Woodhouse: - Revert pxa3xx to its old name to avoid breaking existing 'mtdparts=' boot strings. - Return GPMI NAND to its legacy ECC layout for backwards compatibility. We will revisit this in 3.13. A note from David on the latter fix: 'This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care.'" * tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd: mtd: gpmi: fix ECC regression mtd: nand: pxa3xx: Fix registered MTD name
2013-10-25vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameterNicholas Bellinger
This patch addresses a long-standing bug where the get_user_pages_fast() write parameter used for setting the underlying page table entry permission bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl(). However, this parameter is intended to signal WRITEs to pinned userspace PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not* for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case. This bug would manifest itself as random process segmentation faults on KVM host after repeated vhost starts + stops and/or with lots of vhost endpoints + LUNs. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25target/pscsi: fix return value checkWei Yongjun
In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25mtd: gpmi: fix ECC regressionDavid Woodhouse
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by computing the ECC strength and ECC step size ourselves. Commit 2febcdf84b ("mtd: gpmi: set the BCHs geometry with the ecc info") makes the driver use the ECC info (ECC strength and ECC step size) provided by the MTD code, and creates a different NAND ECC layout for the BCH, and use the new ECC layout. This causes a regression: We can not mount the ubifs which was created by the old NAND ECC layout. This patch fixes this issue by reverting to the legacy ECC layout. We will probably introduce a new device-tree property to indicate that the new ECC layout can be used. For now though, for the imminent 3.12 release, we just unconditionally revert to the 3.11 behaviour. This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2013-10-25acpi-cpufreq: Fail initialization if driver cannot be registeredRafael J. Wysocki
Make acpi_cpufreq_init() return error codes when the driver cannot be registered so that the module doesn't stay useless in memory and so that acpi_cpufreq_exit() doesn't attempt to unregister things that have never been registered when the module is unloaded. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-10-25[SCSI] Revert "sg: use rwsem to solve race during exclusive open"James Bottomley
This reverts commit 15b06f9a02406e5460001db6d5af5c738cd3d4e7. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: no need sg_open_exclusive_lock"James Bottomley
This reverts commit 00b2d9d6d05b56fc1d77071ff8ccbd2c65b48dec. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: checking sdp->detached isn't protected when open"James Bottomley
This reverts commit e32c9e6300e3af659cbfe45e90a1e7dcd3572ada. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: push file descriptor list locking down to per-device locking"James Bottomley
This reverts commit 1f962ebcdfa15cede59e9edb299d1330949eec92. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-24mtd: nand: pxa3xx: Fix registered MTD nameEzequiel Garcia
In a recent commit: commit f455578dd961087a5cf94730d9f6489bb1d355f0 Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon Aug 12 14:14:53 2013 -0300 mtd: nand: pxa3xx: Remove hardcoded mtd name There's no advantage in using a hardcoded name for the mtd device. Instead use the provided by the platform_device. The MTD name was changed to use the one provided by the platform_device. However, this can be problematic as some users want to set partitions using the kernel parameter 'mtdparts', where the name is needed. Therefore, to avoid regressions in users relying in 'mtdparts' we revert the change and use the previous one 'pxa3xx_nand-0'. While at it, let's put a big comment and prevent this change from happening ever again. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>