path: root/drivers
AgeCommit message (Collapse)Author
2011-08-08dm: fix idr leak on module removalAlasdair G Kergon
commit d15b774c2920d55e3d58275c97fbe3adc3afde38 upstream. Destroy _minor_idr when unloading the core dm module. (Found by kmemleak.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08dm mpath: fix potential NULL pointer in feature arg processingMike Snitzer
commit 286f367dad40beb3234a18c17391d03ba939a7f3 upstream. Avoid dereferencing a NULL pointer if the number of feature arguments supplied is fewer than indicated. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08EHCI: fix direction handling for interrupt data togglesAlan Stern
commit e04f5f7e423018bcec84c11af2058cdce87816f3 upstream. This patch (as1480) fixes a rather obscure bug in ehci-hcd. The qh_update() routine needs to know the number and direction of the endpoint corresponding to its QH argument. The number can be taken directly from the QH data structure, but the direction isn't stored there. The direction is taken instead from the first qTD linked to the QH. However, it turns out that for interrupt transfers, qh_update() gets called before the qTDs are linked to the QH. As a result, qh_update() computes a bogus direction value, which messes up the endpoint toggle handling. Under the right combination of circumstances this causes usb_reset_endpoint() not to work correctly, which causes packets to be dropped and communications to fail. Now, it's silly for the QH structure not to have direct access to all the descriptor information for the corresponding endpoint. Ultimately it may get a pointer to the usb_host_endpoint structure; for now, adding a copy of the direction flag solves the immediate problem. This allows the Spyder2 color-calibration system (a low-speed USB device that sends all its interrupt data packets with the toggle set to 0 and hance requires constant use of usb_reset_endpoint) to work when connected through a high-speed hub. Thanks to Graeme Gill for supplying the hardware that allowed me to track down this bug. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Graeme Gill <graeme@argyllcms.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08EHCI: only power off port if over-current is activeSergei Shtylyov
commit 81463c1d707186adbbe534016cd1249edeab0dac upstream. MAX4967 USB power supply chip we use on our boards signals over-current when power is not enabled; once it's enabled, over-current signal returns to normal. That unfortunately caused the endless stream of "over-current change on port" messages. The EHCI root hub code reacts on every over-current signal change with powering off the port -- such change event is generated the moment the port power is enabled, so once enabled the power is immediately cut off. I think we should only cut off power when we're seeing the active over-current signal, so I'm adding such check to that code. I also think that the fact that we've cut off the port power should be reflected in the result of GetPortStatus request immediately, hence I'm adding a PORTSCn register readback after write... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08cciss: do not attempt to read from a write-only registerStephen M. Cameron
commit 07d0c38e7d84f911c72058a124c7f17b3c779a65 upstream. Most smartarrays will tolerate it, but some new ones don't. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Note: this is a regression caused by commit 1ddd5049 Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08PCI: ARI is a PCIe v2 featureChris Wright
commit 864d296cf948aef0fa32b81407541572583f7572 upstream. The function pci_enable_ari() may mistakenly set the downstream port of a v1 PCIe switch in ARI Forwarding mode. This is a PCIe v2 feature, and with an SR-IOV device on that switch port believing the switch above is ARI capable it may attempt to use functions 8-255, translating into invalid (non-zero) device numbers for that bus. This has been seen to cause Completion Timeouts and general misbehaviour including hangs and panics. Acked-by: Don Dutile <ddutile@redhat.com> Tested-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08pmcraid: reject negative request sizeDan Rosenberg
commit b5b515445f4f5a905c5dd27e6e682868ccd6c09d upstream. There's a code path in pmcraid that can be reached via device ioctl that causes all sorts of ugliness, including heap corruption or triggering the OOM killer due to consecutive allocation of large numbers of pages. First, the user can call pmcraid_chr_ioctl(), with a type PMCRAID_PASSTHROUGH_IOCTL. This calls through to pmcraid_ioctl_passthrough(). Next, a pmcraid_passthrough_ioctl_buffer is copied in, and the request_size variable is set to buffer->ioarcb.data_transfer_length, which is an arbitrary 32-bit signed value provided by the user. If a negative value is provided here, bad things can happen. For example, pmcraid_build_passthrough_ioadls() is called with this request_size, which immediately calls pmcraid_alloc_sglist() with a negative size. The resulting math on allocating a scatter list can result in an overflow in the kzalloc() call (if num_elem is 0, the sglist will be smaller than expected), or if num_elem is unexpectedly large the subsequent loop will call alloc_pages() repeatedly, a high number of pages will be allocated and the OOM killer might be invoked. It looks like preventing this value from being negative in pmcraid_ioctl_passthrough() would be sufficient. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08ses: requesting a fault indicationDouglas Gilbert
commit 2a350cab9daf9a46322d83b091bb05cf54ccf6ab upstream. Noticed that when the sysfs interface of the SCSI SES driver was used to request a fault indication the LED flashed but the buzzer didn't sound. So it was doing what REQUEST IDENT (locate) should do. Changelog: - fix the setting of REQUEST FAULT for the device slot and array device slot elements in the enclosure control diagnostic page - note the potentially defective code that reads the FAULT SENSED and FAULT REQUESTED bits from the enclosure status diagnostic page The attached patch is against git/scsi-misc-2.6 Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups.Werner Fink
commit 82103978189e9731658cd32da5eb85ab7b8542b8 upstream. This patch resulted from the discussion at https://bugzilla.novell.com/show_bug.cgi?id=679277, https://bugzilla.novell.com/show_bug.cgi?id=681840 . Signed-off-by: Werner Fink <werner@novell.com> Signed-off-by: Ankit Jain <jankit@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08libsas: remove expander from dev list on errorLuben Tuikov
commit 5911e963d3718e306bcac387b83e259aa4228896 upstream. If expander discovery fails (sas_discover_expander()), remove the expander from the port device list (sas_ex_discover_expander()), before freeing it. Else the list is corrupted and, e.g., when we attempt to send SMP commands to other devices, the kernel oopses. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Reviewed-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08jme: Fix unmap error (Causing system freeze)Guo-Fu Tseng
commit 94c5b41b327e08de0ddf563237855f55080652a1 upstream. This patch add the missing dma_unmap(). Which solved the critical issue of system freeze on heavy load. Michal Miroslaw's rejected patch: [PATCH v2 10/46] net: jme: convert to generic DMA API Pointed out the issue also, thank you Michal. But the fix was incorrect. It would unmap needed address when low memory. Got lots of feedback from End user and Gentoo Bugzilla. https://bugs.gentoo.org/show_bug.cgi?id=373109 Thank you all. :) Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: dummy-hcd needs the has_tt flagAlan Stern
commit c5c69f3f0dcf9b569c8f3ad67f3af92cfcedac43 upstream. Like with other host controllers capable of operating at both high speed and full speed, we need to indicate that the emulated controller presented by dummy-hcd has this ability. Otherwise usbcore will not accept full-speed gadgets under dummy-hcd. This patch (as1469) sets the appropriate has_tt flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: musb: restore INDEX register in resume pathAjay Kumar Gupta
commit 3c5fec75e121b21a2eb35e5a6b44291509abba6f upstream. Restoring the missing INDEX register value in musb_restore_context(). Without this suspend resume functionality is broken with offmode enabled. Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: OHCI: fix another regression for NVIDIA controllersAlan Stern
commit 6ea12a04d295235ed67010a09fdea58c949e3eb0 upstream. The NVIDIA series of OHCI controllers continues to be troublesome. A few people using the MCP67 chipset have reported that even with the most recent kernels, the OHCI controller fails to handle new connections and spams the system log with "unable to enumerate USB port" messages. This is different from the other problems previously reported for NVIDIA OHCI controllers, although it is probably related. It turns out that the MCP67 controller does not like to be kept in the RESET state very long. After only a few seconds, it decides not to work any more. This patch (as1479) changes the PCI initialization quirk code so that NVIDIA controllers are switched into the SUSPEND state after 50 ms of RESET. With no interrupts enabled and all the downstream devices reset, and thus unable to send wakeup requests, this should be perfectly safe (even for non-NVIDIA hardware). The removal code in ohci-hcd hasn't been changed; it will still leave the controller in the RESET state. As a result, if someone unloads ohci-hcd and then reloads it, the controller won't work again until the system is rebooted. If anybody complains about this, the removal code can be updated similarly. This fixes Bugzilla #22052. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08staging: comedi: fix infoleak to userspaceVasiliy Kulikov
commit 819cbb120eaec7e014e5abd029260db1ca8c5735 upstream. driver_name and board_name are pointers to strings, not buffers of size COMEDI_NAMELEN. Copying COMEDI_NAMELEN bytes of a string containing less than COMEDI_NAMELEN-1 bytes would leak some unrelated bytes. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: serial: add IDs for WinChipHead USB->RS232 adapterWolfgang Denk
commit 026dfaf18973404a01f488d6aa556a8c466e06a4 upstream. Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with Prolifec PL2303 chipset Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: pl2303.h: checkpatch cleanupsGreg Kroah-Hartman
commit 5d78fcb0caf219e2e6c8e486d7e31fec1333ac06 upstream. Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: pl2303: add AdLink ND-6530 USB IDsManuel Jander
commit 9a61d72602771906e11a5944e8571f8006387b39 upstream. I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08libata: fix unexpectedly frozen port after ata_eh_reset()Tejun Heo
commit 8c56cacc724c7650b893d43068fa66044aa29a61 upstream. To work around controllers which can't properly plug events while reset, ata_eh_reset() clears error states and ATA_PFLAG_EH_PENDING after reset but before RESET is marked done. As reset is the final recovery action and full verification of devices including onlineness and classfication match is done afterwards, this shouldn't lead to lost devices or missed hotplug events. Unfortunately, it forgot to thaw the port when clearing EH_PENDING, so if the condition happens after resetting an empty port, the port could be left frozen and EH will end without thawing it, making the port unresponsive to further hotplug events. Thaw if the port is frozen after clearing EH_PENDING. This problem is reported by Bruce Stenning in the following thread. http://thread.gmane.org/gmane.linux.kernel/1123265 stable: I think we should weather this patch a bit longer in -rcX before sending it to -stable. Please wait at least a month after this patch makes upstream. Thanks. -v2: Fixed spelling in the comment per Dave Howorth. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Bruce Stenning <b.stenning@indigovision.com> Cc: Dave Howorth <dhoworth@mrc-lmb.cam.ac.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08hwmon: (max1111) Fix race condition causing NULL pointer exceptionPavel Herrmann
commit d3f684f2820a7f42acef68bea6622d9032127fb2 upstream. spi_sync call uses its spi_message parameter to keep completion information, using a drvdata structure is not thread-safe. Use a mutex to prevent multiple access to shared driver data. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Cyril Hrubis <metan@ucw.cz> Tested-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08si4713-i2c: avoid potential buffer overflow on si4713Mauro Carvalho Chehab
commit dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 upstream. While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08bttv: fix s_tuner for radioHans Verkuil
commit a024c1a6b274e11596d124619e43c25560f64c01 upstream. Fix typo: g_tuner should have been s_tuner. Tested with a bttv card. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08pvrusb2: fix g/s_tuner supportHans Verkuil
commit 50e9efd60b213ce43ad6979bfc18e25eec2d8413 upstream. The tuner-core subdev requires that the type field of v4l2_tuner is filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't use that yet, so we have to do it manually based on whether the current input is radio or not. Tested with my pvrusb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tunerHans Verkuil
commit 227690df75382e46a4f6ea1bbc5df855a674b47f upstream. The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13USB: don't let the hub driver prevent system sleepAlan Stern
commit cbb330045e5df8f665ac60227ff898421fc8fb92 upstream. This patch (as1465) continues implementation of the policy that errors during suspend or hibernation should not prevent the system from going to sleep. In this case, failure to turn on the Suspend feature for a hub port shouldn't be reported as an error. There are situations where this does actually occur (such as when the device plugged into that port was disconnected in the recent past), and it turns out to be harmless. There's no reason for it to prevent a system sleep. Also, don't allow the hub driver to fail a system suspend if the downstream ports aren't all suspended. This is also harmless (and should never happen, given the change mentioned above); printing a warning message in the kernel log is all we really need to do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13USB: don't let errors prevent system sleepAlan Stern
commit 0af212ba8f123c2eba151af7726c34a50b127962 upstream. This patch (as1464) implements the recommended policy that most errors during suspend or hibernation should not prevent the system from going to sleep. In particular, failure to suspend a USB driver or a USB device should not prevent the sleep from succeeding: Failure to suspend a device won't matter, because the device will automatically go into suspend mode when the USB bus stops carrying packets. (This might be less true for USB-3.0 devices, but let's not worry about them now.) Failure of a driver to suspend might lead to trouble later on when the system wakes up, but it isn't sufficient reason to prevent the system from going to sleep. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-136pack,mkiss: fix lock inconsistencyArnd Bergmann
commit 6e4e2f811bade330126d4029c88c831784a7efd9 upstream. Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP <f6bvp@free.fr> Tested-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ralf Baechle<ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13md: avoid endless recovery loop when waiting for fail device to complete.NeilBrown
commit 4274215d24633df7302069e51426659d4759c5ed upstream. If a device fails in a way that causes pending request to take a while to complete, md will not be able to immediately remove it from the array in remove_and_add_spares. It will then incorrectly look like a spare device and md will try to recover it even though it is failed. This leads to a recovery process starting and instantly aborting over and over again. We should check if the device is faulty before considering it to be a spare. This will avoid trying to start a recovery that cannot proceed. This bug was introduced in 2.6.26 so that patch is suitable for any kernel since then. Reported-by: Jim Paradis <james.paradis@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13i2c-taos-evm: Fix log messagesJean Delvare
commit 9b640f2e154268cb516efcaf9c434f2e73c6783e upstream. * Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13watchdog: mtx1-wdt: request gpio before using itFlorian Fainelli
commit 9b19d40aa3ebaf1078779da10555da2ab8512422 upstream. Otherwise, the gpiolib autorequest feature will produce a WARN_ON(): WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c() autorequest GPIO-215 [...] Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13uvcvideo: Remove buffers from the queues when freeingSjoerd Simons
commit 8ca2c80b170c47eeb55f0c2a0f2b8edf85f35d49 upstream. When freeing memory for the video buffers also remove them from the irq & main queues. This fixes an oops when doing the following: open ("/dev/video", ..) VIDIOC_REQBUFS VIDIOC_QBUF VIDIOC_REQBUFS close () As the second VIDIOC_REQBUFS will cause the list entries of the buffers to be cleared while they still hang around on the main and irc queues Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13ath5k: fix memory leak when fewer than N_PD_CURVES are in useEugene A. Shatokhin
commit a0b8de350be458b33248e48b2174d9af8a4c4798 upstream. We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13xhci: Reject double add of active endpoints.Sarah Sharp
commit fa75ac379e63c2864e9049b5e8615e40f65c1e70 upstream. While trying to switch a UAS device from the BOT configuration to the UAS configuration via the bConfigurationValue file, Tanya ran into an issue in the USB core. usb_disable_device() sets entries in udev->ep_out and udev->ep_out to NULL, but doesn't call into the xHCI bandwidth management functions to remove the BOT configuration endpoints from the xHCI host's internal structures. The USB core would then attempt to add endpoints for the UAS configuration, and some of the endpoints had the same address as endpoints in the BOT configuration. The xHCI driver blindly added the endpoints again, but the xHCI host controller rejected the Configure Endpoint command because active endpoints were added without being dropped. Make the xHCI driver reject calls to xhci_add_endpoint() that attempt to add active endpoints without first calling xhci_drop_endpoint(). This should be backported to kernels as old as 2.6.31. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Tanya Brokhman <tlinder@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-13TTY: ldisc, do not close until there are readersJiri Slaby
commit 92f6fa09bd453ffe3351fa1f1377a1b7cfa911e6 upstream. We restored tty_ldisc_wait_idle in 100eeae2c5c (TTY: restore tty_ldisc_wait_idle). We used it in the ldisc changing path to fix the case where there are tasks in n_tty_read waiting for data and somebody tries to change ldisc. Similar to the case above, there may be also tasks waiting in n_tty_read while hangup is performed. As 65b770468e98 (tty-ldisc: turn ldisc user count into a proper refcount) removed the wait-until-idle from all paths, hangup path won't wait for them to disappear either now. So add it back even to the hangup path. There is a difference, we need uninterruptible sleep as there is obviously HUP signal pending. So tty_ldisc_wait_idle now sleeps without possibility to be interrupted. This is what original tty_ldisc_wait_idle did. After the wait idle reintroduction (100eeae2c5c), we have had interruptible sleeps for the ldisc changing path. But as there is a 5s timeout anyway, we don't allow it to be interrupted from now on. It's not worth the added complexity of deciding what kind of sleep we want. Before 65b770468e98 tty_ldisc_release was called also from tty_ldisc_release. It is called from tty_release, so I don't think we need to restore that one. This is nicely reproducible after constifying the timing when drivers/tty/n_tty.c is patched as follows ("TTY: ntty, add one more sanity check" patch is needed to actually see it explode): %% -1548,6 +1549,7 @@ static int n_tty_open(struct tty_struct *tty) /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { + msleep(100); tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!tty->read_buf) return -ENOMEM; %% -1785,6 +1788,7 @@ do_it_again: break; } timeout = schedule_timeout(timeout); + msleep(20); continue; } __set_current_state(TASK_RUNNING); ===== With a process: ===== while (1) { int fd = open(argv[1], O_RDWR); read(fd, buf, sizeof(buf)); close(fd); } ===== and its child: ===== setsid(); while (1) { int fd = open(tty, O_RDWR|O_NOCTTY); ioctl(fd, TIOCSCTTY, 1); vhangup(); close(fd); usleep(100 * (10 + random() % 1000)); } ===== EOF ===== References: https://bugzilla.novell.com/show_bug.cgi?id=693374 References: https://bugzilla.novell.com/show_bug.cgi?id=694509 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23Revert "iwlagn: Support new 5000 microcode."Greg Kroah-Hartman
This reverts commit 6f63415fc1b690cb50c2ad48ba6e9e6e88e271b4. It turns out this is not what we want to have happen for the .32 and .33-longterm kernels as it does not work properly at all. This was reported by Gentoo, Arch, and Canonical developers as causing problems for their users: https://bugs.archlinux.org/task/24302 http://bugs.gentoo.org/show_bug.cgi?id=359445 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/796336 Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Gordon Malm <gengor@gentoo.org> Cc: Don Fry <donald.h.fry@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23xen: Use IRQF_FORCE_RESUMEThomas Gleixner
commit 676dc3cf5bc36a9e129a3ad8fe3bd7b2ebf20f5d upstream. Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra walk through the interrupt descriptors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23xen: events: do not unmask event channels on resumeIan Campbell
commit 6903591f314b8947d0e362bda7715e90eb9df75e upstream. The IRQ core code will take care of disabling and reenabling interrupts over suspend resume automatically, therefore we do not need to do this in the Xen event channel code. The only exception is those event channels marked IRQF_NO_SUSPEND which the IRQ core ignores. We must unmask these ourselves, taking care to obey the current IRQ_DISABLED status. Failure check for IRQ_DISABLED leads to enabling polled only event channels, such as that associated with the pv spinlocks, which must never be enabled: [ 21.970432] ------------[ cut here ]------------ [ 21.970432] kernel BUG at arch/x86/xen/spinlock.c:343! [ 21.970432] invalid opcode: 0000 [#1] SMP [ 21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 21.970432] Modules linked in: [ 21.970432] [ 21.970432] Pid: 0, comm: swapper Not tainted ( #34) [ 21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3 [ 21.970432] EIP is at dummy_handler+0x3/0x7 [ 21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000 [ 21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10 [ 21.970432] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000) [ 21.970432] Stack: [ 21.970432] dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001 [ 21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284 [ 21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90 [ 21.970432] Call Trace: [ 21.970432] [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122 [ 21.970432] [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55 [ 21.970432] [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f [ 21.970432] [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30 [ 21.970432] [<c1030d47>] ? xen_do_upcall+0x7/0xc [ 21.970432] [<c102007b>] ? apic_reg_read+0xd3/0x22d [ 21.970432] [<c1002227>] ? hypercall_page+0x227/0x1005 [ 21.970432] [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14 [ 21.970432] [<c102da7c>] ? check_events+0x8/0xc [ 21.970432] [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1 [ 21.970432] [<c105e485>] ? finish_task_switch+0x62/0xba [ 21.970432] [<c14e3f84>] ? schedule+0x808/0x89d [ 21.970432] [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22 [ 21.970432] [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162 [ 21.970432] [<c102f43a>] ? cpu_idle+0x6d/0x6f [ 21.970432] [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf [ 21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \ c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \ eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15 [ 21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10 [ 21.970432] ---[ end trace c0b71f7e12cf3011 ]--- Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23ACPI: use _HID when supplied by root-level devicesBjorn Helgaas
commit b7b30de53aef6ce773d34837ba7d8422bd3baeec upstream. Previously, we assumed the only Device object immediately below the root was the \_SB Scope (which the ACPI CA treats as a Device), so we forced the HID of all such objects to ACPI_BUS_HID ("LNXSYBUS"). However, there are DSDTs that supply root-level Device objects with _HIDs. This patch makes us pay attention to those _HIDs and only add the synthetic ACPI_BUS_HID for root-level objects that do not supply their own _HID. For example, this DSDT: https://bugzilla.kernel.org/show_bug.cgi?id=15605 contains: Scope (_SB) { ... } Device (AMW0) { Name (_HID, EisaId ("PNP0C14")) ... } and we should use "PNP0C14" for the AMW0 device, not "LNXSYBUS". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Tested-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cm64x: fix boot crash on pariscJames Bottomley
commit 9281b16caac1276817b77033c5b8a1f5ca30102c upstream. The old IDE cmd64x checks the status of the CNTRL register to see if the ports are enabled before probing them. pata_cmd64x doesn't do this, which causes a HPMC on parisc when it tries to poke at the secondary port because apparently the BAR isn't wired up (and a non-responding piece of memory causes a HPMC). Fix this by porting the CNTRL register port detection logic from IDE cmd64x. In addition, following converns from Alan Cox, add a check to see if a mobility electronics bridge is the immediate parent and forgo the check if it is (prevents problems on hotplug controllers). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: remove unused definitionsBartlomiej Zolnierkiewicz
commit c754d9b6e04371fb398cdd2f5e77be895126be20 upstream. s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: cmd648_bmdma_stop() fixBartlomiej Zolnierkiewicz
commit 03a849e6ddb604ff6a220b78637ee8e122ffc796 upstream. Clear the primary channel pending interrupt bit instead of the reserved one. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23pata_cmd64x: fix PIO setupBartlomiej Zolnierkiewicz
commit a2bd62207af4be8f5fe815ff90cc309056407829 upstream. Fix incorrect handling of recovery clocks value == 16 resulting in overclocked recovery timings & potentially underclocked active timings. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23ata: use pci_dev->revisionSergei Shtylyov
commit 89d3b3603bfb648e0113d8682d4f84dd18a776bd upstream. Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID, so they weren't converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23md/raid5: fix FUA request handling in ops_run_io()Namhyung Kim
commit b062962edb086011e94ec4d9eb3f6a6d814f2a8f upstream. Commit e9c7469bb4f5 ("md: implment REQ_FLUSH/FUA support") introduced R5_WantFUA flag and set rw to WRITE_FUA in that case. However remaining code still checks whether rw is exactly same as WRITE or not, so FUAed-write ends up with being treated as READ. Fix it. This bug has been present since 2.6.37 and the fix is suitable for any -stable kernel since then. It is not clear why this has not caused more problems. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23md/raid5: fix raid5_set_bi_hw_segmentsNamhyung Kim
commit 9b2dc8b665932a8e681a7ab3237f60475e75e161 upstream. The @bio->bi_phys_segments consists of active stripes count in the lower 16 bits and processed stripes count in the upper 16 bits. So logical-OR operator should be bitwise one. This bug has been present since 2.6.27 and the fix is suitable for any -stable kernel since then. Fortunately the bad code is only used on error paths and is relatively unlikely to be hit. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23md: check ->hot_remove_disk when removing diskNamhyung Kim
commit 01393f3d5836b7d62e925e6f4658a7eb22b83a11 upstream. Check pers->hot_remove_disk instead of pers->hot_add_disk in slot_store() during disk removal. The linear personality only has ->hot_add_disk and no ->hot_remove_disk, so that removing disk in the array resulted to following kernel bug: $ sudo mdadm --create /dev/md0 --level=linear --raid-devices=4 /dev/loop[0-3] $ echo none | sudo tee /sys/block/md0/md/dev-loop2/slot BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD c9f5d067 PUD 8575a067 PMD 0 Oops: 0010 [#1] SMP CPU 2 Modules linked in: linear loop bridge stp llc kvm_intel kvm asus_atk0110 sr_mod cdrom sg Pid: 10450, comm: tee Not tainted 3.0.0-rc1-leonard+ #173 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff880085757df0 EFLAGS: 00010282 RAX: ffffffffa00168e0 RBX: ffff8800d1431800 RCX: 000000000000006e RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff88008543c000 RBP: ffff880085757e48 R08: 0000000000000002 R09: 000000000000000a R10: 0000000000000000 R11: ffff88008543c2e0 R12: 00000000ffffffff R13: ffff8800b4641000 R14: 0000000000000005 R15: 0000000000000000 FS: 00007fe8c9e05700(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b4502000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process tee (pid: 10450, threadinfo ffff880085756000, task ffff8800c9f08000) Stack: ffffffff8138496a ffff8800b4641000 ffff88008543c268 0000000000000000 ffff8800b4641000 ffff88008543c000 ffff8800d1431868 ffffffff81a78a90 ffff8800b4641000 ffff88008543c000 ffff8800d1431800 ffff880085757e98 Call Trace: [<ffffffff8138496a>] ? slot_store+0xaa/0x265 [<ffffffff81384bae>] rdev_attr_store+0x89/0xa8 [<ffffffff8115a96a>] sysfs_write_file+0x108/0x144 [<ffffffff81106b87>] vfs_write+0xb1/0x10d [<ffffffff8106e6c0>] ? trace_hardirqs_on_caller+0x111/0x135 [<ffffffff81106cac>] sys_write+0x4d/0x77 [<ffffffff814fe702>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff880085757df0> CR2: 0000000000000000 ---[ end trace ba5fc64319a826fb ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23CPUFREQ: Remove cpufreq_stats sysfs entries on module unload.Dave Jones
commit 13f067537f34456443f61c950cd6dc37d1d5f3ee upstream. cpufreq_stats leaves behind its sysfs entries, which causes a panic when something stumbled across them. (Discovered by unloading cpufreq_stats while powertop was loaded). Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: xhci - fix interval calculation for FS isoc endpointsDmitry Torokhov
commit cd3c18ba2fac14b34d03cae111f215009735ea06 upstream. Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driverSteffen Sledz
commit a26d31cef06f43a76327c21235e75450869df2b8 upstream. E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-23USB: core: Tolerate protocol stall during hub and port status readLibor Pechacek
commit 3824c1ddaf744be44b170a335332b9d6afe79254 upstream. Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>