aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-11-25i2c: Handle i2c_add_adapter failure in i2c algorithm driversMark M. Hoffman
It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-25USB: UHCI: Increase port-reset completion delay for HP controllersAlan Stern
This patch (as657) increases the port-reset completion delay in uhci-hcd for HP's embedded controllers. Unlike other UHCI controllers, the HP chips can take as long as 250 us to carry out the processing associated with finishing a port reset. This fixes Novell bug #148761. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: backout ioctl messChristoph Hellwig
The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: wrong register used in hptiop_reset_hba()HighPoint Linux Team
IOP reset message should be posted to inbound message register instead of outbound message register. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: don't use cmnd->bufflenJames Bottomley
use cmnd->request_bufflen instead. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driverHighPoint Linux Team
Updates: - don't bypass SYNCHRONIZE_CACHE command - return SCSI_MLQUEUE_HOST_BUSY when no free request slots - move scsi_remove_host() to the begin of hpt_remove(), or it will not work after resources being released. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driverHighPoint Linux Team
HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host Adapters. Fixes from original submission: Merge Andrew Morton's patches: - Provide locking for global list - Fix debug printks - uninline function with multiple callsites - coding style fixups - remove unneeded casts of void* - kfree(NULL) is legal - Don't "succeed" if register_chrdev() failed - otherwise we'll later unregister a not-registered chrdev. - Don't return from hptiop_do_ioctl() with the spinlock held. - uninline __hpt_do_ioctl() Update for Arjan van de Ven's comments: - put all asm/ includes after the linux/ ones - replace mdelay with msleep - add pci posting flush - do not set pci command reqister in map_pci_bar - do not try merging sg elements in hptiop_buildsgl() - remove unused outstandingcommands member from hba structure - remove unimplemented hptiop_abort() handler - remove typedef u32 hpt_id_t Other updates: - fix endianess Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-24Fix i2c-ixp4xx compilation breakageJean Delvare
Fix recent i2c-ixp4xx compilation breakage. Sorry for overlooking it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-23[SCSI] advansys pci tweaks.Adrian Bunk
Remove a lot of duplicate #defines from the advansys driver, and make them look like PCI IDs as defined elsewhere in the kernel. Also add a module table so that it automatically gets picked up by tools relying on modinfo output (like say, distro installers). Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-23advansys section fixesRandy Dunlap
Priority: not critical. Mark 3 functions __init. Saves a little memory. This makes these functions' calls to AdvWaitEEPCmd() (which is __init) be clean (i.e., eliminates text -> init -> text call chain). Fix multiple section mismatch warnings: WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-23[SCSI] advansys driver: limp along on x86Linus Torvalds
Let people enable the advansys driver on x86-32, even though it's broken on other architectures due to missing DMA mapping infrastructure. It's used by Jeffrey Phillips Freeman <jeffreyfreeman@syncleus.com> and possibly others. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-23i2c-ixp4xx: fix ") != 0))" typoAlexey Dobriyan
i2c_bit_add_bus() returns -E; -E != 0 => err = 1 probe fails with positive error code Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20Add new PHY to sis900 supported listDaniele Venzano
This patch adds support for a new PHY to the sis900 driver. See also Bugzilla 6919. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20sis900 adm7001 PHY supportArtur Skawina
this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875) (picking the #1 transceiver, instead of the last one, in case no known ones were found might be a better default, and would have worked in this case too) Signed-off-by: Artur Skawina <art_k@o2.pl> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20Old IDE, fix SATA detection for cablingMichael-Luke Jones
This patch is identical to that introduced in 1a1276e7b6cba549553285f74e87f702bfff6fac to the Linus' 2.6 development tree by Alan Cox. 'This is based on the proposed patches flying around but also checks that the device in question is new enough to have word 93 rather thanb blindly assuming word 93 == 0 means SATA (see ATA-5, ATA-7)' -- Alan Cox Required for my SATA drive on an Asus Pundit-R to operate above 33MBps. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20V4L/DVB: Saa7134: rename dmasound_{init,exit}Adrian Bunk
Two different exports with the same name are not a good idea: $ grep -r EXPORT_SYMBOL\(dmasound_init\) * drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init); sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init); $ This patch renames the saa7134 dmasound_{init,exit} to saa7134_dmasound_{init,exit}. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20drivers/scsi/psi240i.c: fix an array overrunAdrian Bunk
This patch fixes an array overrun spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-20[TG3]: Fix array overrun in tg3_read_partno().Michael Chan
Use proper upper limits for the loops and check for all error conditions. The problem was noticed by Adrian Bunk. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-17ipmi_si_intf.c: fix "&& 0xff" typosAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-17synclink_gt fix receive tty error handlingPaul Fulghum
Fix receive tty error handling in synclink_gt driver. Adrian reported compiler warning for incorrect bit test against char variable. I determined these and other device specific error bits were incorrectly defined. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-15sata_promise: Support FastTrak TX4300/TX4310Daniel Drake
This patch adds support for the Promise FastTrak TX4300/TX4310 4-port PCI SATA controllers based on the PDC40719 chip. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-15Reduce ACPI verbosity on null handle conditionBob Moore
As detailed at http://bugs.gentoo.org/131534 : 2.6.16 converted many ACPI debug messages into error or warning messages. One extraneous message was incorrectly converted, resulting in logs being flooded by "Handle is NULL and Pathname is relative" messages on some systems. This patch (part of a larger ACPICA commit) converts the message back to debug level. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-11sata_sil24: add a new PCI ID for SiI 3124Tejun Heo
Add a new PCI ID for SiI 3124. Reported by Silicon Image. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-11nvidia fbdev: fix powerpc xmon scribblesPaul Mackerras
xmon writes garbage on the screen because the nvidia console driver has changed the line pitch from what the firmware set it to. Fix it by making the nvidia driver inform the btext engine (which xmon uses if the screen is its output device) about changes to display resolution. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-11scx200_acb: Fix the block transactionsJean Delvare
The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-11Fix the scx200_acb state machine:Thomas Andrews
* Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-09drivers/video/nvidia/nvidia.c: Add ID for Quadro NVS280Pavel Roskin
Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem I 10de:0215. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-09[AGPGART] remove unused variableAdrian Bunk
This patch removes an unused variable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Jones <davej@redhat.com>
2006-11-09[AGPGART] Suspend/Resume support for nVidia nForce AGP.Dave Jones
Based on a patch from the Ubuntu kernel. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-09drivers/telephony/ixj: fix an array overrunAdrian Bunk
The Coverity checker noted that in drivers/telephony/ixj.c:ixj_build_filter_cadence(), filter_en[4] or filter_en[5] could be written to. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-08nvidiafb: Add support for Geforce 6100 and related chipsetsAntonino Daplas
Add support for Geforce 6100 and related chipsets (PCI device id 0x024x) Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-08drivers/md/md.c: update START_ARRAY printkAdrian Bunk
START_ARRAY will not be removed in 2.6.16, therefore replace the date reference with a kernel version reference. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-08fbdev: correct buffer size limit in fbmem_read_proc()Geert Uytterhoeven
Address http://bugzilla.kernel.org/show_bug.cgi?id=7189 It should check `clen', not `len'. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-14[PPPOE]: Advertise PPPoE MTUMichal Ostrowski
PPPoE must advertise the underlying device's MTU via the ppp channel descriptor structure, as multilink functionality depends on it. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13fbdev: add modeline for 1680x1050@60Olaf Hering
Add a modeline for the Philips 200W display. aty128fb does not do DDC, it picks 1920x1440 or similar. It works ok with nvidiafb because it can ask for DDC data. mode "1680x1050-60" # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz geometry 1680 1050 1680 1050 16 timings 6848 280 104 30 3 176 6 hsync high vsync high rgba 5/11,6/5,5/0,0/0 endmode hwinfo --monitor 20: None 00.0: 10000 Monitor [Created at monitor.206] Unique ID: rdCR.pzUFTofo1S4 Parent ID: 002j.bJRsY88eNSC Hardware Class: monitor Model: "PHILIPS Philips 200W" Vendor: PHL "PHILIPS" Device: eisa 0x0832 "Philips 200W" Serial ID: "VN 016596" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1152x864@70Hz Resolution: 1152x864@75Hz Resolution: 1280x960@60Hz Resolution: 1280x1024@60Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 56-85 Hz Hor. Sync Range: 30-93 kHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (VGA compatible controller) Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13sky2: accept flow controlStephen Hemminger
Don't program the GMAC to reject flow control packets. This maybe the cause of some of the transmit hangs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13sky2: fix fiber supportStephen Hemminger
Fix support for fiber based devices. Needed to keep track of PMD type to add workaround in setup. Add support for gigabit half duplex fiber. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13sky2: use dev_alloc_skb for receive buffersStephen Hemminger
Several code paths assume an additional 16 bytes of header padding on the receive path. Use dev_alloc_skb to get that padding. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13v4l/dvb: Backport the budget driver DISEQC instability fixOliver Endriss
Backport the budget driver DISEQC instability fix. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-13v4l/dvb: Backport fix to artec USB DVB devicesAndrew de Quincey
Backport fix to artec USB DVB devices Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13v4l/dvb: Fix budget-av frontend detectionAndrew de Quincey
The budget-av needs this GPIO set low for most cards to work. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-13dvb-core: Proper handling ULE SNDU length of 0 (CVE-2006-4623)Ang Way Chuang
ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation code has a bug that allows an attacker to send a malformed ULE packet with SNDU length of 0 and bring down the receiving machine. This patch fix the bug and has been tested on version 2.6.17.11. This bug is 100% reproducible and the modified source code (GPL) used to produce this bug will be posted on http://nrg.cs.usm.my/downloads.htm shortly. The kernel will produce a dump during CRC32 checking on faulty ULE packet. Signed-off-by: Ang Way Chuang <wcang@nrg.cs.usm.my> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-22USB: add YEALINK phones to the HID_QUIRK_IGNORE blacklistHenk Vergonet
Keys on Yealink based phones will not function properly when using the generic HID driver. This patch prevents the generic HID code from grabbing the device before the regular yealink driver can get a grip on it. Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-22USB: Fix unload oops and memory leak in yealink driverHenk Vergonet
This patch fixes a memory leak and a kernel oops when trying to unload the driver, due to an unbalanced cleanup. Thanks Ivar Jensen for spotting my mistake. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-22I2C: fix 'ignore' module parameter handlingMark M. Hoffman
This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-19V4L/DVB: TDA8290 updateHartmut Hackmann
This patch - works around a bug in the I2C bridge that makes the initialization of the TDA10046 fail on recent LifeView cards - puts the AGC output to tristate in sleep mode. This is necessary for recent hybrid cards that switch the AGC via tristateing. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-18via-velocity: fix speed and link status reported by ethtoolJay Cliburn
The via-velocity driver reports incorrect speed and link detected status as viewed by ethtool (and probably other tools). This patch fixes those incorrect reports and prettifies a long line. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-18via-velocity: the link is not correctly detected when the device startsRoy Marples
The patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=6711 Signed-off-by: Roy Marples <uberlord@gentoo.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-18[AGPGART] VIA PT880 Ultra support.Magnus Kessler
This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by: Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-18[AGPGART] ATI RS350 support.Julien Tous
From: Julien Tous <julien.tous@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-14 02:23:48 +0000