aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2012-08-27spi/topcliff-pch: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Also, the device subsystem resets device driver data to NULL after the call to the remove function returns, so there is no need to do it here. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/tegra: Fix device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27spi/stmp: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. The remove function accesses the freed memory after the call to spi_unregister_master(), _and_ it calls spi_master_put on the freed memory. Acquire a reference to the SPI master device and release it after cleanup is complete (with the existing spi_master_put) to solve the problem. Also, the device subsystem ensures that the remove function is only called once, and resets device driver data to NULL. Remove the respective check and drop the unnecessaary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-23spi/sc18is602: Return -EINVAL for probe failures due to I2C function mismatchGuenter Roeck
If the I2C bus master driver does not support the required functionality, the driver returns -ENODEV. This causes a silent probe failure without error message. Since the device has to be explicitly instantiated, and the user should know the correct bus, this event really reflects an error condition. Replace error return value with -EINVAL to trigger an error message showing that the probe function failed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Add devicetree supportRoland Stigge
This patch adds device tree support to the spi-pl022 driver. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Add chip select handling via GPIORoland Stigge
This patch adds the ability for the driver to control the chip select directly. This enables independence from cs_control callbacks. Configurable via platform_data, to be extended as DT in the following patch. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: Master driver for NXP SC18IS602/603Guenter Roeck
This driver adds support for NXP SC18IS602/603 I2C to SPI bus bridge. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc512x-psc: Avoid access to freed memory in device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx-psc: Avoid access to freed memory in device remove functionGuenter Roeck
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI master device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. At the same time, since the call to spi_unregister_master results in device memory being freed, it must no longer be accessed afterwards. To fix both problems, call spi_master_get to get an extra reference to the device, and call spi_master_put only after the last access to device data. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/mpc52xx: Fix error handling in probe functionGuenter Roeck
The call to spi_master_put() is needed to free device memory. It must be called after spi_alloc_master, and must only be called after the device memory is no longer used. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi/pl022: Fix device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: At remove dont use the runtime_autosuspend callsShubhrajyoti D
At remove we shouldnt be using the autosuspend timeout as we are calling pm_runtime_disable immediately after. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: Call pm_runtime_* functions directlyShubhrajyoti D
Call the pm_runtime functions directly making room for possible pm optimisations. Also the runtime functions aren't just about enabling and disabling of clocks though it does enable clocks also. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22spi: omap2-mcspi: Remove the macro MOD_REG_BITShubhrajyoti D
Remove the macro MOD_REG_BIT instead make the bit field modifications directly. This deletes a branch operation in cases where the the set is predecided. While at it optimise two sequential bit clear in one step. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22drivers/spi/spi-s3c24xx.c: fix error return codeJulia Lawall
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: omap2-mcspi: Remove the call to platform_set_drvdata(pdev, NULL)Shubhrajyoti D
Remove the call of platform_set_drvdata(pdev, NULL) as they are not needed anymore. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: spi-altera: Use of_match_ptrTobias Klauser
Instead of having to define the match table to NULL if CONFIG_OF isn't set, use the of_match_ptr() macro which will do this for us. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: Refactor spi-orion to use SPI framework queue.Andrew Lunn
Replace the deprecated master->transfer with transfer_one_message() and allow the SPI subsystem handle all the queuing of messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-10spi/s3c64xx: improve error handlingArnd Bergmann
When a device tree definition os an s3c64xx SPI master is missing a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata function might use uninitialized memory in place of that node, which was correctly reported by gcc. Without this patch, building s3c6400_defconfig results in: drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25': drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Jaswinder Singh <jaswinder.singh@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-08-01Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-07-31spi: omap2-mcspi: remove private DMA API implementationRussell King
Remove the private DMA API implementation from spi-omap2-mcspi.c, making it use entirely the DMA engine API. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31spi: omap2-mcspi: add DMA engine supportRussell King
Add DMA engine support to the OMAP SPI driver. This supplements the private DMA API implementation contained within this driver, and the driver can be independently switched at build time between using DMA engine and the private DMA API for the transmit and receive sides. Tested-by: Shubhrajyoti <shubhrajyoti@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
2012-07-26Merge tag 'spi-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things." * tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/orion: remove uneeded spi_info spi/bcm63xx: fix clock configuration selection spi/orion: add device tree binding spi/omap2: mark omap2_mcspi_master_setup as __devinit spi: omap2-mcspi: Fix the below warning spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver spi/imx: use gpio_is_valid to determine if a gpio is valid spi/imx: remove redundant config.speed_hz setting spi/gpio: start with CS non-active spi: tegra: use dmaengine based dma driver spi/pl022: cleanup pl022 header documentation spi/pl022: enable runtime PM spi/pl022: delete DB5500 support spi/pl022: disable port when unused spi: Add "spi:" prefix to modalias attribute of spi devices
2012-07-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch update from Greg Ungerer: "Quite a varied set of changes this time. - A little more merge cleanup, this time the assembler entry code. - New sub-architecture support for the ColdFire 5251/5253 and 5441x CPU families. - Specific clk support code for the ColdFire 520x and 532x CPU familes. - Refactoring of the ColdFire GPIO support. - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx family). This showed up a few problems with ColdFire cache, allocating coherent memory and bi-directional DMA support. Fixes for those too." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs m68k: add PCI bus code support for the ColdFire M54xx SoC family m68k: add IO access definitions to support PCI on ColdFire platforms m68k: add PCI bus support definitions for the ColdFire M54xx SoC family m68k: common PCI support definitions and code m68k: add support for DMA_BIDIRECTIONAL in dma support functions m68k: fix ColdFire clear cache operation m68k: use simpler dma_alloc_coherent() for ColdFire CPUs m68knommu: platform support for 8390 based ethernet used on some boards m68knommu: Add clk definitions for m532x. m68knommu: Add clk definitions for m520x. m68knommu: Add rtc device for m5441x. m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller. m68knommu: Add support for the Coldfire m5441x. m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 coldfire-qspi: Add support for the Coldfire 5251/5253. m68knommu: Add support for the Coldfire 5251/5253 m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips. m68k: merge the MMU and non-MMU versions of the entry.S code m68k: use jbsr to call functions instead of bsrl ...
2012-07-23Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clk changes from Arnd Bergmann: "Clock support is moving to the clk subsystem. These tegra, omap and imx changes are for code that is still platform specific and not (yet) part of that subsystem." Fix up conflicts in arch/arm/mach-{imx/clk-imx51-imx53.c,omap2/Makefile} * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: imx: clk-imx31: Fix clock id for rnga driver ARM: imx: add missing item to the list of clock event modes ARM: i.MX5x CSPI: Fixed clock name for CSPI ARM: i.MX5x clocks: Fix GPT clocks ARM: i.MX5x clocks: Fix parent for PWM clocks ARM: i.MX5x clocks: Add EPIT support ARM: mx27: Reenable silicon version print ARM: clk-imx27: Fix rtc clock id ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: OMAP3+: clock33xx: Add AM33XX clock tree data ARM: OMAP3+: clock: Move common clksel_rate & clock data to common file ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare ...
2012-07-23spi/orion: remove uneeded spi_infoMichael Walle
This was formerly used to store the tclk value. This is now discovered using the clk API, rather than pass it as platform data. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/bcm63xx: fix clock configuration selectionFlorian Fainelli
We are currently using an inferior or equal operator for comparing the transfer frequency with the clock frequency table. Because of this, we always end up selecting 20Mhz as a frequency, due to the inequality transfer hz <= 20 Mhz being always true. Fix this by reversing the inequality, which is how the comparison should be done. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23SPI: MIPS: lantiq: add FALCON spi driverThomas Langer
The external bus unit (EBU) found on the FALCON SoC has spi emulation that is designed for serial flash access. This driver has only been tested with m25p80 type chips. The hardware has no support for other types of spi peripherals. Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> Signed-off-by: John Crispin <blogic@openwrt.org> Cc: spi-devel-general@lists.sourceforge.net Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23spi/orion: add device tree bindingAndrew Lunn
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-22spi/omap2: mark omap2_mcspi_master_setup as __devinitArnd Bergmann
This warning recently appeared with omap2plus_defconfig: WARNING: drivers/spi/built-in.o(.devinit.text+0x3c4): Section mismatch in reference from the function omap2_mcspi_probe() to the function .init.text:omap2_mcspi_master_setup() The function __devinit omap2_mcspi_probe() references a function __init omap2_mcspi_master_setup(). If omap2_mcspi_master_setup is only used by omap2_mcspi_probe then annotate omap2_mcspi_master_setup with a matching annotation. The fix is obviously to mark the omap2_mcspi_master_setup function as __devinit, rather than __init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: omap2-mcspi: Fix the below warningShubhrajyoti D
The dma_map and dma_unmap should have same parameter passed otherwise we get the below warn. ks8851 spi1.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000009f22] [ 2.066925] Modules linked in: [ 2.070312] [ 2.071929] [<c001c250>] (unwind_backtrace+0x0/0x130) from [<c0043d84>] (warn_slowpath_common+0x4c/0x64) [ 2.081909] [<c0043d84>] (warn_slowpath_common+0x4c/0x64) from [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) [ 2.091949] [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) from [<c0293824>] (check_unmap+0x6d0/0x7b0) [ 2.101348] [<c0293824>] (check_unmap+0x6d0/0x7b0) from [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) [ 2.111053] [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) from [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) [ 2.121582] [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) from [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) [ 2.132537] [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) from [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) [ 2.144592] [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) from [<c03503bc>] (spi_pump_messages+0x100/0x160) [ 2.156127] [<c03503bc>] (spi_pump_messages+0x100/0x160) from [<c006635c>] (kthread_worker_fn+0xac/0x180) [ 2.166168] [<c006635c>] (kthread_worker_fn+0xac/0x180) from [<c0066578>] (kthread+0x90/0x9c) [ 2.175140] [<c0066578>] (kthread+0x90/0x9c) from [<c00157fc>] (kernel_thread_exit+0x0/0x8) [ 2.183898] ---[ end trace d1830ce6e44292f2 ]--- Fix the warn by changing the unmap parameter. Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driverLars-Peter Clausen
This patch adds support for the I2C-SPI bridge which can be found on the Analog Devices AD-FMCOMMS1-EBZ board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-19spi/s3c64xx: Expand S3C64XX_SPI_{DE,}ACT macros at call sitesMark Brown
They have very few users and they're both just doing a single register write so the advantage of having the macro is a bit limited. An inline function might make sense but it's as easy to just do the writes directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Convert to devm_request_and_ioremap()Mark Brown
Saves some error handling and a small amount of code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Put the /CS GPIO into output modeMark Brown
No call was being made by the GPIO driver to put the GPIO into output mode meaning that the calls to gpio_set_value() which were being done were not valid. A similar issue appears to exist with the DT GPIO requests but as they appear to be being used for pinmux it's less clear to me that we want to configure them. Without this fix Cragganmore systems can't talk to their SPI devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-19spi/s3c64xx: Fix handling of errors in gpio_request()Mark Brown
When gpio_request() fails the driver logged the failure but while it'd try to print an error code in the non-DT case it didn't pass the error code in so garbage would be logged and in the DT case the error wasn't logged. Further, in the non-DT case the error code was then overwritten with -EBUSY depriving the caller of information and breaking automatic probe deferral pushing back from the GPIO level. Also reformat the non-DT log message so it's not word wrapped and we can grep for it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-16coldfire-qspi: Add support for the Coldfire 5251/5253.Steven King
The Coldfire 5251/5253 have a QSPI controller. Enable selection of the coldfire-qspi driver if the M525x is selected. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-13spi/imx: use gpio_is_valid to determine if a gpio is validHui Wang
Use gpio_is_valid() to replace "gpio >= 0" or "gpio < 0". Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi/imx: remove redundant config.speed_hz settingHui Wang
The config.speed_hz is just setted at the two lines ahead of it, obviously we don't need to copy the code to set the config.speed_hz again. Remove it for a cleanup. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi: s3c64xx: add device tree supportThomas Abraham
Add support for device based discovery. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: Remove the 'set_level' callback from controller dataThomas Abraham
The set_level callback in the controller data, which is used to configure the slave select line, cannot be supported when migrating the driver to device tree based discovery. Since all the platforms currently use gpio as the slave select line, this callback can be removed from the controller data and replaced with call to gpio_set_value in the driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functionsThomas Abraham
The platform data pointer that is passed to the spi gpio setup functions is not used. Hence, this parameter is removed from all the spi gpio setup functions. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: move controller information into driver dataThomas Abraham
Platform data is used to specify controller hardware specific information such as the tx/rx fifo level mask and bit offset of rx fifo level. Such information is not suitable to be supplied from device tree. Instead, it can be moved into the driver data and removed from platform data. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macroThomas Abraham
The macro S3C64XX_SPI_ST_TRLCNTZ is not used and hence it is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13Merge branch 'next/devel-dma-ops' into next/dt-samsungKukjin Kim
2012-07-11Merge branch 'pl022' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into spi-next
2012-07-10spi/gpio: start with CS non-activeUwe Kleine-König
The chip select line was configured as output with the initial value being active explicitly. It was later deasserted during spi_bitbang_setup() without any clock activity in between. So it makes no sense to activate the device at all and the chip select line can better start non-active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10spi: tegra: use dmaengine based dma driverLaxman Dewangan
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI FIFO and memory in place of legacy Tegra APB DMA. The new driver is selected if legacy driver is not selected and new DMA driver is enabled through config file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>