aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2014-12-24Merge remote-tracking branches 'spi/fix/img-spfi' and 'spi/fix/msiof' into ↵Mark Brown
spi-linus
2014-12-24spi: img-spfi: Increase DMA burst sizeAndrew Bresticker
A 1-byte burst size is rather inefficient and has been shown to cause TX issues during testing. Increase the DMA burst size to 4-bytes for both RX and TX DMA when using the 8-bit FIFO. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: img-spfi: Enable controller before starting TX DMAAndrew Bresticker
It is recommended that the SPFI controller be enabled (i.e. setting SPFI_EN in SPFI_CONTROL) before TX DMA begins. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-19spi: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
A couple of new CONFIG_PM_RUNTIME users have been added recently in the SPI subsystem. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/ (again). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2014-12-18Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-15spi: sh-msiof: Add runtime PM lock in initializingHisashi Nakamura
SH-MSIOF driver is enabled autosuspend API of spi framework. But autosuspend framework doesn't work during initializing. So runtime PM lock is added in SH-MSIOF driver initializing. Fixes: e2a0ba547ba31c (spi: sh-msiof: Convert to spi core auto_runtime_pm framework) Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-13spi: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2014-12-11Merge tag 'devicetree-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Lots of activity in the devicetree code for v3.18. Most of it is related to getting all of the overlay support code in place, but there are other important things in there. Highlights: - OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those subsystems can now respond to live changes to the device tree. - CONFIG_OF_OVERLAY method for applying live changes to the device tree - Removal of the of_allnodes list. This used to be used to iterate over all the nodes in the device tree, but it is unnecessary because the same thing can be done by iterating over the list of child pointers. Getting rid of of_allnodes saves some memory and avoids the possibility of of_allnodes being sorted differently from the child lists. - Support for retrieving original DTB blob via sysfs. Needed by kexec. - More unittests - Documentation and minor bug fixes" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits) of: Delete unnecessary check before calling "of_node_put()" of: Drop ->next pointer from struct device_node spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y of: support passing console options with stdout-path of: add optional options parameter to of_find_node_by_path() of: Add bindings for chosen node, stdout-path of: Remove unneeded and incorrect MODULE_DEVICE_TABLE ARM: dt: fix up PL011 device tree bindings of: base, fix of_property_read_string_helper kernel-doc of: remove select of non-existant OF_DEVICE config symbol spi/of: Add OF notifier handler spi/of: Create new device registration method and accessors i2c/of: Add OF_RECONFIG notifier handler i2c/of: Factor out Devicetree registration code of/overlay: Add overlay unittests of/overlay: Introduce DT overlay support of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type of/reconfig: Always use the same structure for notifiers of/reconfig: Add debug output for OF_RECONFIG notifiers of/reconfig: Add empty stubs for the of_reconfig methods ...
2014-12-11Merge tag 'spi-v3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Not a huge amount going on this release, mainly new drivers (there's a couple more waiting that didn't quite make the cut for this release too): - An interface for querying if the current transfer is the last in a message, allowing controllers that need special handling for the final transfer to use the core message parsing. - Support for Amlogic Meson SPIFC, Imagination Technologies SFPI, Intel Quark X1000 and Samsung Exynos 7 controllers" * tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (38 commits) spi/s3c64xx: Remove redundant runtime PM management spi: fsl-spi: remove unused variable assignment spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg() spi: core: Do not mangle error code from kthread_run() spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use spi: fsl-(e)spi: migrate to generic master queueing spi/txx9: Deletion of an unnecessary check before the function call "clk_disable" spi: cadence: Fix 3-to-8 mux mode spi: cadence: Init HW after reading devicetree attributes spi: meson: Select REGMAP_MMIO spi: s3c64xx: add support for exynos7 SPI controller spi: spi-pxa2xx: SPI support for Intel Quark X1000 spi: meson: meson_spifc_setup_speed() can be static spi: spi-pxa2xx: Add helpers for regiseters' accessing spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list spi: atmel: introduce probe deferring spi: atmel: remove compat for non DT board when requesting dma chan spi: meson: Add support for Amlogic Meson SPIFC spi: meson: Add device tree bindings documentation for SPIFC spi: core: Add spi_transfer_is_last() helper ...
2014-12-08Merge branch 'pm-runtime'Rafael J. Wysocki
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
2014-12-08Merge remote-tracking branches 'spi/topic/spidev' and 'spi/topic/txx9' into ↵Mark Brown
spi-next
2014-12-08Merge remote-tracking branches 'spi/topic/mxs', 'spi/topic/pxa', ↵Mark Brown
'spi/topic/rockchip', 'spi/topic/samsung' and 'spi/topic/sirf' into spi-next
2014-12-08Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/fsl-espi', ↵Mark Brown
'spi/topic/gpio', 'spi/topic/img-spfi' and 'spi/topic/meson' into spi-next
2014-12-08Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/cadence', ↵Mark Brown
'spi/topic/dw' and 'spi/topic/fsl-cpm' into spi-next
2014-12-08Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2014-12-08Merge remote-tracking branch 'spi/fix/cadence' into spi-linusMark Brown
2014-12-07spi/s3c64xx: Remove redundant runtime PM managementMark Brown
The device already asks the core to hold a runtime PM reference while it is active so it is redundant to open code that in the driver itself. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04spi: fsl-spi: remove unused variable assignmentHeiner Kallweit
Remove an unused variable assignment. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg()Fabio Estevam
Since commit c592becbe704127 ("spi: fsl-(e)spi: migrate to generic master queueing") the function fsl_spi_do_one_msg() is not void anymore, so return an error code to avoid the following buid warning: drivers/spi/spi-fsl-spi.c: In function 'fsl_spi_do_one_msg': >> drivers/spi/spi-fsl-spi.c:374:4: warning: 'return' with no value, in function returning non-void [-Wreturn-type] return; ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04spi: core: Do not mangle error code from kthread_run()Jarkko Nikula
kthread_run() could return ERR_PTR(-EINTR) from kthread_create_on_node(). Return the actual error code in spi_init_queue() instead of mangling it to -ENOMEM. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04PM: Merge the SET*_RUNTIME_PM_OPS() macrosRafael J. Wysocki
The SET_PM_RUNTIME_PM_OPS() and SET_RUNTIME_PM_OPS() macros are identical except that one of them is not empty for CONFIG_PM set, while the other one is not empty for CONFIG_PM_RUNTIME set, respectively. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so one of these macros is now redundant. For this reason, replace SET_PM_RUNTIME_PM_OPS() with SET_RUNTIME_PM_OPS() everywhere and redefine the SET_PM_RUNTIME_PM_OPS symbol as SET_RUNTIME_PM_OPS in case new code is starting to use the macro being removed here. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-03spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=yFabio Estevam
Since commit ce79d54ae447d651173 ("spi/of: Add OF notifier handler") the following warning is seen on a imx53 system that has CONFIG_OF_DYNAMIC=n: [ 0.048119] ------------[ cut here ]------------ [ 0.048146] WARNING: CPU: 0 PID: 1 at drivers/spi/spi.c:2419 spi_init+0x60/0xa8() [ 0.048158] Modules linked in: [ 0.048183] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-next-20141126-00003-g9388e85 #2080 [ 0.048193] Hardware name: Freescale i.MX53 (Device Tree Support) [ 0.048203] Backtrace: [ 0.048235] [<80011f74>] (dump_backtrace) from [<80012110>] (show_stack+0x18/0x1c) [ 0.048246] r6:00000973 r5:00000000 r4:00000000 r3:00000000 [ 0.048284] [<800120f8>] (show_stack) from [<806b3ad8>] (dump_stack+0x88/0xa4) [ 0.048312] [<806b3a50>] (dump_stack) from [<8002a55c>] (warn_slowpath_common+0x80/0xbc) [ 0.048320] r5:8096cfcc r4:00000000 [ 0.048343] [<8002a4dc>] (warn_slowpath_common) from [<8002a5bc>] (warn_slowpath_null+0x24/0x2c) [ 0.048354] r8:8096cf6c r7:809355ec r6:ddcd7c00 r5:812029e4 r4:00000000 [ 0.048389] [<8002a598>] (warn_slowpath_null) from [<8096cfcc>] (spi_init+0x60/0xa8) [ 0.048405] [<8096cf6c>] (spi_init) from [<80008a7c>] (do_one_initcall+0x88/0x1e0) [ 0.048415] r5:8099e018 r4:8099e018 [ 0.048438] [<800089f4>] (do_one_initcall) from [<80935e38>] (kernel_init_freeable+0x110/0x1e0) [ 0.048448] r10:80980700 r9:809806e4 r8:000000cc r7:809355ec r6:809f8940 r5:00000002 [ 0.048478] r4:8098d744 [ 0.048508] [<80935d28>] (kernel_init_freeable) from [<806ae574>] (kernel_init+0x10/0xf4) [ 0.048517] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:806ae564 [ 0.048547] r4:00000000 [ 0.048565] [<806ae564>] (kernel_init) from [<8000ed68>] (ret_from_fork+0x14/0x2c) [ 0.048574] r4:00000000 r3:00000000 [ 0.048616] ---[ end trace 405a65d177dae4fd ]--- Only check of_reconfig_notifier_register() in the CONFIG_OF_DYNAMIC=y case, as intended by commit ce79d54ae447d65. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI ↵Heiner Kallweit
is not in use Use (un)prepare_transfer_hardware calls to set fsl-espi to low-power idle if not in use. Reference manual states: "The eSPI is in a idle state and consumes minimal power. The eSPI BRG is not functioning and the input clock is disabled" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03spi: fsl-(e)spi: migrate to generic master queueingHeiner Kallweit
Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-01spi/txx9: Deletion of an unnecessary check before the function call ↵Markus Elfring
"clk_disable" The clk_disable() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-28spi: cadence: Fix 3-to-8 mux modeLars-Peter Clausen
In 3-to-8 mux mode for the CS pins we need to set the PERI_SEL bit in the control register. Currently the driver never sets this bit even when configured for 3-to-8 mux mode. This patch adds code which sets the bit during device initialization when necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-28spi: cadence: Init HW after reading devicetree attributesPaul Cercueil
This will make it possible to use the settings specified in the devicetree to configure the hardware. Signed-off-by: Paul Cercueil <paul.cercueil@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27spi: meson: Select REGMAP_MMIOBeniamino Galvani
The Meson SPIFC driver uses regmap mmio functions and so it must select REGMAP_MMIO to avoid the following build error: spi-meson-spifc.c: undefined reference to `devm_regmap_init_mmio_clk' Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26Merge remote-tracking branches 'spi/fix/dw' and 'spi/fix/sirf' into spi-linusMark Brown
2014-11-26Merge remote-tracking branch 'spi/fix/dma' into spi-linusMark Brown
2014-11-26spi: s3c64xx: add support for exynos7 SPI controllerPadmavathi Venna
Exynos7 SPI controller supports only the auto Selection of CS toggle mode and Exynos7 SoC includes six SPI controllers. Add support for these changes in Exynos7 SPI controller driver. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26spi: spi-pxa2xx: SPI support for Intel Quark X1000Weike Chen
There are two SPI controllers exported by PCI subsystem for Intel Quark X1000. The SPI memory mapped I/O registers supported by Quark are different from the current implementation, and Quark only supports the registers of 'SSCR0', 'SSCR1', 'SSSR', 'SSDR', and 'DDS_RATE'. This patch is to enable the SPI for Intel Quark X1000. This piece of work is derived from Dan O'Donovan's initial work for Intel Quark X1000 SPI enabling. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25spi/of: Add OF notifier handlerPantelis Antoniou
Add OF notifier handler needed for creating/destroying spi devices according to dynamic runtime changes in the DT live tree. This code is enabled when CONFIG_OF_DYNAMIC is selected. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Cc: <linux-spi@vger.kernel.org>
2014-11-25spi/of: Create new device registration method and accessorsPantelis Antoniou
Dynamically inserting spi device nodes requires the use of a single device registration method. Refactor the existing of_register_spi_devices() to split out the core functionality for a single device into a separate function; of_register_spi_device(). This function will be used by the OF_DYNAMIC overlay code to make live modifications to the tree. Methods to lookup a device/master using a device node are added as well, of_find_spi_master_by_node() & of_find_spi_device_by_node(). Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely] Split patch into two pieces for clarity Signed-off-by: Grant Likely <grant.likely@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Cc: <linux-spi@vger.kernel.org>
2014-11-25spi: meson: meson_spifc_setup_speed() can be statickbuild test robot
drivers/spi/spi-meson-spifc.c:171:6: sparse: symbol 'meson_spifc_setup_speed' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: spi-pxa2xx: Add helpers for regiseters' accessingWeike Chen
There are several registers for SPI, and the registers of 'SSCR0' and 'SSCR1' are accessed frequently. This path is to introduce helper functions to simplify the accessing of 'SSCR0' and 'SSCR1'. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter listCharles Keepax
We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_init_one to be invalid. Currently, this issue doesn't show up on the MXS architecture as the defconfig defines CONFIG_HIGHMEM=n which means all pages are mapped. For the sake of robustness though it is best to correct the issue. As we only call page_address so that we can pass a virtual address to sg_init_one which will eventually call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_init_one helper. Note this patch is only build tested as I don't have an MXS system to test on. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: atmel: introduce probe deferringLudovic Desroches
Return probe defer if requesting a dma channel without a dma controller probed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: atmel: remove compat for non DT board when requesting dma chanLudovic Desroches
All boards with a dma controller have DT support so using dma_request_slave_channel_compat is no more needed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: meson: Add support for Amlogic Meson SPIFCBeniamino Galvani
This is a driver for the Amlogic Meson SPIFC (SPI flash controller), which is one of the two SPI controllers available on the SoC. It doesn't support DMA and has a 64-byte unified transmit/receive buffer. The device is optimized for interfacing with SPI NOR memories and allows the execution of standard operations such as read, page program, sector erase, etc. in a simplified way, toggling a bit in a dedicated register. The driver doesn't use those predefined commands and relies only on custom transfers. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21spi: fsl-spi: Don't use cpm_command on CPM1Christophe Leroy
On CPM1, when the SPI parameter RAM is relocated to somewhere else than the default location, in accordance with freescale documentation (refer micropatch SPI application note EB662), init RX/TX params command shall not be used because it doesn't take into account the new location, and overwrites data that is in original location of SPI param ram at addresses SCC2 param base + (u32*)0x88 (u16*)0x90 (u32*)0x98 (u16*)0xA0, hence breaking activity on SCC2 if SCC2 is used in a mode like QMC for instance. Therefore, the action shall be done manually as described by freescale and as was already partly done by the driver. Reported-by: Patrick Vasseur <patrick.vasseur@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Patrick Vasseur <patrick.vasseur@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21spi: sirf: reset SPI controller in init stageQipan Li
in SPI boot mode, romcode uses SPI controller to fetch data from NOR flash. Here we need to reset the hardware IP to restore its state. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18spi: sirf: assign spi_master's max_speed_hz memberQipan Li
if spi device has no frequency, spi core will setup the default frequency to max_speed_hz of spi_master according to int spi_setup(struct spi_device *spi) { ... if (!spi->max_speed_hz) spi->max_speed_hz = spi->master->max_speed_hz; ... } this patch moves CSR SiRFSoC SPI frequency set to follow SPI core behaviour. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18spi: sirf: fix word width configurationQipan Li
commit 8c328a262f ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of fifo is not right, it should use sspi->word_width >> 1 to set related bits. According to hardware spec, the mapping between register value and data width: 0 - byte 1 - WORD 2 - DWORD Fixes: 8c328a262f ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-17spi: Add driver for IMG SPFI controllerAndrew Bresticker
Add support for the Synchronous Peripheral Flash Interface (SPFI) master controller found on IMG SoCs. The SPFI controller supports 5 chip-select lines and single/dual/quad mode SPI transfers. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17spi: Fix mapping from vmalloc-ed buffer to scatter listCharles Keepax
We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_set_buf to be invalid. As we only call page_address so that we can pass a virtual address to sg_set_buf which will then immediately call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_set_buf helper. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-12spi/rockchip: remove redundant call to spi_master_put()Laurentiu Palcu
The call to spi_master_put() in rockchip_spi_remove() is redundant since the master is registered using devm_. This patch removes it. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-11spi: spidev: Don't mangle max_speed_hz in underlying spi deviceMark Brown
Currently spidev allows callers to set the default speed by overriding the max_speed_hz in the underlying device. This achieves the immediate goal but is not what devices expect and can easily lead to userspace trying to set unsupported speeds and succeeding, apart from anything else drivers can't set a limit on the speed using max_speed_hz as they'd expect and any other devices on the bus will be affected. Instead store the default speed in the spidev struct and fill this in on each transfer. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10spi: spi-mxs: Register the irq with the device nameFabio Estevam
Instead of registering the irq name with the driver name, it's better to pass the device name so that we have a more explicit indication as to what spi instance the irq is related: $ cat /proc/interrupts CPU0 ... 27: 0 - 98 80014000.ssp Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>