aboutsummaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2007-07-21rtc: add support for STK17TA8 chipThomas Hommel
This patch adds support for the Simtek STK17TA8 timekeeping chip. The STK17TA8 is quite similar to the DS1553, but differs in register layout and in various control bits in the registers. I chose to make this a new driver to avoid confusion in the code and to not get lost in #ifdefs. Signed-off-by: Thomas Hommel <thomas.hommel@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21rtc: update and use the MAX6900 century byteDale Farnsworth
We now read and write the century byte in the max6900 chip. We probably don't need to do so on Linux-only system, but it's necessary when the chip is shared by another OS that uses the century byte. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21rtc kconfig: point out need for static linkageDavid Brownell
Various people have expressed surprise that their modular RTC drivers don't seem to work for initializing the system time at boot. To help avoid such unpleasantness, make the Kconfig text point out that the driver probably needs to be statically linked. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21rtc: do not return void valueAtsushi Nemoto
This patch fixes these sparse warnings: drivers/rtc/rtc-ds1742.c:265:2: warning: returning void-valued expression drivers/rtc/rtc-ds1553.c:409:2: warning: returning void-valued expression Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20sh: Fix up SH-3 and SH-4 driver dependencies.Paul Mundt
Both shwdt and rtc-sh are only supported on SH-3 and SH-4 at the moment, don't allow them to break the SH-2 and SH-5 (sh64) builds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19RTC: add periodic irq support to rtc-cmosAlessandro Zummo
Adds support for periodic irq enabling in rtc-cmos. This could be used by the ALSA driver and is already being tested with the zaptel ztdummy module. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17OMAP: add TI TWL92330/Menelaus Power Management chip driverTony Lindgren
Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This includes voltage regulators, Dual slot memory card tranceivers and real-time clock(RTC). The support for RTC is integrated with this driver only; it is not separate module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic" (1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too. The battery keeps the RTC active over power off, so once you set clock (rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will behave as expected. Cc: "Jean Delvare" <khali@linux-fr.org> Cc: "Tony Lindgren" <tony@atomide.com> Cc: "David Brownell" <david-b@pacbell.net> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307 becomes new-style i2c driverDavid Brownell
Convert the rtc-ds1307 driver into a "new style" driver. Also improve probe() checks: be more correct about switching out of AM/PM mode, and issue a (debug) diagnostic when failing due to bogus register values. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307: oscillator restart for ds13{37,38,39,40}Rodolfo Giometti
When we find a ds1337 or ds1339 with the oscillator powered off, turn it on. If the oscillator fault flag was set, clear it and warn that the clock needs to be set. David Brownell: Bugfixes; provide corresponding update for ds1338, and the core of the fix for ds1340. Use a common warning message ("SET TIME!") whenever the clock needs to be set after oscillator fault (or oscillator enable, if fault is not a separate status). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17RTC driver for DS1216 chipsThomas Bogendoerfer
RTC driver for Dallas/Maxim DS126 chips used in SNI RM200/RM400 [akpm@linux-foundation.org: cleanups] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc: add support for the ST M48T59 RTCMark Zhan
[akpm@linux-foundation.org: x86_64 build fix] [akpm@linux-foundation.org: The acpi guys changed the bin_attribute code] Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc: watchdog support for rtc-m41t80 driverAtsushi Nemoto
Add a watchdog driver interface to rtc-m41t80 driver. This is derived from works by Alexander Bigga <ab@mycable.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Alexander Bigga <ab@mycable.de> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc: add rtc-m41t80 driverAtsushi Nemoto
This is a new-style i2c driver for ST M41T80 series RTC chip, derived from works by Alexander Bigga <ab@mycable.de> who wrote the original rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver. This driver supports M41T8[0-4] and M41ST8[457]. The old m41t00 driver supports M41T00, M41T81 and M41T85(M41ST85). While the M41T00 chip is now supported by rtc-ds1307 driver, this driver does not include support for the chip. [akpm@linux-foundation.org: remove bogus `static'] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Alexander Bigga <ab@mycable.de> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17RTC Kconfig tweaxDavid Brownell
Minor fix to the Kconfig for RTCs: don't display section headers for I2C or SPI unless they're configured. And depend on SPI_MASTER; having slave support wouldn't help. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17RTC_CLASS is no longer considered EXPERIMENTALAlessandro Zummo
RTC class is mature enough. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Driver for the Atmel on-chip RTC on AT32AP700x devicesHans-Christian Egtvedt
Tested on the AT32AP7000/ATSTK1000. Driver does only suport time, wake up and a very simple alarm, because of hardware limitations. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 From: David Brownell <david-b@pacbell.net> - Strike some alarm setup code that's no longer needed. (This patch seems to have gotten lost somewhere...) - Make the driver name (and its module alias) match what the platform setup code uses, so the driver can bind and hotplug. [akpm@linux-foundation.org: fix several checkpatch.pl warnings] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-dev: return -ENOTTY in ioctl if irq_set_freq is not implemented by driverHans-Christian Egtvedt
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-rs5c372 becomes a new-style i2c driverDavid Brownell
Convert rtc-rs5c372 to be a "new style" I2C driver, and update the Kconfig text to be more complete.. Verified on an OMAP H4 development platform, along with a board init patch to declare its rv5c387a device. Only one defconfig -- powerpc/linkstation -- uses this driver; but several other platforms use it, just without defconfig support. Such platforms need to be converted so (a) their I2C adapter driver supports new-style drivers, and (b) board init code declares this I2C device. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Voipio Riku <Riku.Voipio@movial.fi> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17rtc-ds1307 cleanupsDavid Brownell
This updates the rtc-ds1307 driver so that converting it to a "new style" driver (driver model, not legacy i2c model) will involve fewer changes. - Use pointer to i2c_client almost everywhere, so that it's easy to let the i2c core create that object; - Avoid using i2c_client.adapter, since that field is redundant and thus may go away (same object as i2c_client.dev.parent). - Extend type enum to include various RTCs this is expected to work with, and include register support for them. It also cleans up the support for multiple chip types, and fixes a glitch that could appear with an un-initialized RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits) [POWERPC] Create add_rtc() function to enable the RTC CMOS driver [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration [POWERPC] Oprofile support for Power 5++ [POWERPC] Enable arbitary speed tty ioctls and split input/output speed [POWERPC] Make drivers/char/hvc_console.c:khvcd() static [POWERPC] Remove dead code for preventing pread() and pwrite() calls [POWERPC] Remove unnecessary #undef printk from prom.c [POWERPC] Fix typo in Ebony default DTS [POWERPC] Check for NULL ppc_md.init_IRQ() before calling [POWERPC] Remove extra return statement [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED [POWERPC] pasemi: Rename platform [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports [POWERPC] Add __read_mostly support for powerpc [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane [POWERPC] Create a dummy zImage if no valid platform has been selected [POWERPC] PS3: Bootwrapper support. [POWERPC] powermac i2c: Use mutex [POWERPC] Schedule removal of arch/ppc ... Fixed up conflicts manually in: Documentation/feature-removal-schedule.txt arch/powerpc/kernel/pci_32.c arch/powerpc/kernel/pci_64.c include/asm-powerpc/pci.h and asked the powerpc people to double-check the result..
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits) sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes sysfs: make directory dentries and inodes reclaimable sysfs: implement sysfs_get_dentry() sysfs: move sysfs_drop_dentry() to dir.c and make it static sysfs: restructure add/remove paths and fix inode update sysfs: use sysfs_mutex to protect the sysfs_dirent tree sysfs: consolidate sysfs spinlocks sysfs: make kobj point to sysfs_dirent instead of dentry sysfs: implement sysfs_find_dirent() and sysfs_get_dirent() sysfs: implement SYSFS_FLAG_REMOVED flag sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags sysfs: make sysfs_drop_dentry() access inodes using ilookup() sysfs: Fix oops in sysfs_drop_dentry on x86_64 sysfs: use singly-linked list for sysfs_dirent tree sysfs: slim down sysfs_dirent->s_active sysfs: move s_active functions to fs/sysfs/dir.c sysfs: fix root sysfs_dirent -> root dentry association sysfs: use iget_locked() instead of new_inode() sysfs: reorganize sysfs_new_indoe() and sysfs_create() sysfs: fix parent refcounting during rename and move ...
2007-07-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Rename PC speaker code [MIPS] Don't use genrtc. [MIPS] Remove unused time.c for swarm [MIPS] Sparse: Use NULL for pointer [MIPS] Fix a sparse warning in arch/mips/pci/pci.c [MIPS] SMTC: Interrupt mask backstop hack [MIPS] separate platform_device registration for VR41xx RTC [MIPS] Separate platform_device registration for VR41xx GPIO [MIPS] MIPSsim: Fix build. [MIPS] separate platform_device registration for VR41xx serial interface [MIPS] Include cacheflush.h in uncache.c [MIPS] Cleanup tlbdebug.h [MIPS] Change names of local variables to silence sparse (part 2) [MIPS] Workaround for a sparse warning in include/asm-mips/io.h [MIPS] RM: Use only phyiscal address for 82596 and 53c710 [MIPS] Hydrogen3: Remove remaining bits of code. [MIPS] DEC: Fix modpost warning. Revert "[MIPS] DEC: Fix modpost warning." [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12[MIPS] separate platform_device registration for VR41xx RTCYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12i2c: Delete outdated x1205 driver documentationJean Delvare
The x1205 driver moved to the RTC subsystem and was significantly modified since then, so just delete the outdated documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[POWERPC] Fix drivers/rtc/Kconfig for powerpcWade Farnsworth
The powerpc arch uses CONFIG_PPC instead of CONFIG_POWERPC. This fixes drivers/rtc/Kconfig to use the correct config option. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-01RTC: use fallback IRQ if PNP tables don't provide oneMatthew Garrett
Intel Macs (and possibly other machines) provide a PNP entry for the RTC, but provide no IRQ. As a result the rtc-cmos driver doesn't allow wakeup alarms. If the RTC is located at the legacy ioport range, assume that it's on IRQ 8 unless the tables say otherwise. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17rtc kconfig clarificationDavid Brownell
Make drivers/rtc/Kconfig be clearer about what the various "interfaces" actually mean, by showing path names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17rtc-omap build fixDavid Brownell
Fix typo which breaks build. How did that happen? Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Rework cobalt_board_id [MIPS] Use RTC_CMOS for Cobalt [MIPS] Use platform_device for Cobalt UART [MIPS] Separate Alchemy processor based boards config [MIPS] Fix build error in atomic64_cmpxchg [MIPS] Run checksyscalls for N32 and O32 ABI [MIPS] tlbex: use __maybe_unused [MIPS] excite: use __maybe_unused [MIPS] Add extern cobalt_board_id [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS [MIPS] Rename tb0229_defconfig to tb0219_defconfig [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219. [MIPS] Add minimum defconfig for RBHMA4200 [MIPS] SB1: Build fix. [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno() [MIPS] clocksource: use CLOCKSOURCE_MASK() macro [MIPS] Remove LIMITED_DMA support [MIPS] Remove Momenco Jaguar ATX support [MIPS] Remove Momenco Ocelot G support [MIPS] FPU hazard handling ...
2007-05-11rtc-rs5c313.c: add error handling to avoid hardware hangupkogiidena
Add error processing. Hanging up by an infinite loop is evaded. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11rtc-rs5c313.c: rtc_time value are fixedkogiidena
Correct an initial value of suruct rtc_ time. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11rtc-rs5c313.c: error and warning are fixedkogiidena
Correct a compile error and warning. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11[MIPS] Use RTC_CMOS for CobaltYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-10[S390] Kconfig: unwanted menus for s390.Martin Schwidefsky
Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix stacktrace simplification fallout. sh: SH7760 DMABRG support. sh: clockevent/clocksource/hrtimers/nohz TMU support. sh: Truncate MAX_ACTIVE_REGIONS for the common case. rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq(). sh: Convert to common die chain. sh: Wire up utimensat syscall. sh: landisk mv_nr_irqs definition. sh: Fixup ndelay() xloops calculation for alternate HZ. sh: Add 32-bit opcode feature CPU flag. sh: Fix PC adjustments for varying opcode length. sh: Support for SH-2A 32-bit opcodes. sh: Kill off redundant __div64_32 symbol export. sh: Share exception vector table for SH-3/4. sh: Always define TRAPA_BUG_OPCODE. sh: __GFP_REPEAT for pte allocations, too. rtc: rtc-sh: Fix up dev_dbg() warnings. sh: generic quicklist support.
2007-05-09Fix trivial typos in Kconfig* filesDavid Sterba
Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq().Paul Mundt
When the rtc_update_irq() callsites stopped passing in the class_dev, the rtc_dev references weren't fixed. Fix it up, so we pass in the proper pointer. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09rtc: rtc-sh: Fix up dev_dbg() warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-08rtc-cmos: make it load on PNPBIOS systemsMarko Vrh
Replace CONFIG_PNPACPI with CONFIG_PNP, so it loads on ACPI-less PNPBIOS systems. Signed-off-by: Marko Vrh <mvrh@freeshells.ch> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: remove "RTC_ALM_SET mode" bugsDavid Brownell
This fixes a common glitch in how RTC drivers handle two "set alarm" modes, by getting rid of the surprising/hidden one that was rarely implemented correctly (and which could expose nonportable hardware-specific behavior). The glitch comes from the /dev/rtcX logic implementing the legacy RTC_ALM_SET (limited to 24 hours, needing RTC_AIE_ON) ioctl on top of the RTC driver call providing access to the newer RTC_WKALM_SET (without those limitations) by initializing the day/month/year fields to be invalid ... that second mode. Now, since few RTC drivers check those fields, and most hardware misbehaves when faced with invalid date fields, many RTC drivers will set bogus alarm times on those RTC_ALM_SET code paths. (Several in-tree drivers have that issue, and I also noticed it with code reviews on several new RTC drivers.) This patch ensures that RTC drivers never see such invalid alarm fields, by moving some logic out of rtc-omap into the RTC_ALM_SET code and adding an explicit check (which will prevent the issue on other code paths). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08revert "rtc: Add rtc_merge_alarm()"Andrew Morton
David says "884b4aaaa242a2db8c8252796f0118164a680ab5 should be reverted. It added an rtc_merge_alarm() call to the 2.6.20 kernel, which hasn't yet been used by any in-tree driver; this patch obviates the need for that call, and uses a more robust approach." Cc: Scott Wood <scottwood@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc-cmos wakeup interfaceDavid Brownell
I finally got around to testing the updated wakeup event hooks for rtc-cmos, and they follow in two patches: - Interface update ... when a simple enable_irq_wake() doesn't suffice, the platform data can hold suspend/resume callback hooks. - ACPI implementation ... provides callback hooks to do ACPI magic, and eliminate the legacy /proc/acpi/alarm file. The interface update could go into 2.6.21, but that's not essential; they will be NOPs on most PCs, without the ACPI stuff. I suspect the ACPI folk may have opinions about how to merge that second patch, and how to obsolete that legacy procfs file. I'd like to see that merge into 2.6.22 if possible... As for how to kick it in ... two ways: - The appended "rtcwake" program; updated since the last time it was posted, it deals much better with timezones and DST. - Write the /sys/class/rtc/.../wakealarm file, then go to sleep. For some reason RTC wake from "swsusp" stopped working on a system where it previously worked; the alarm setting appears to get clobbered. But on the bright side, RTC wake from "standby" worked on a system that had never been able to resume from that state before ... IDEACPI is my guess as to why it finally started to work. It's the old "two steps forward, one step back" dance, I guess. - Dave /* gcc -Wall -Os -o rtcwake rtcwake.c */ #include <stdio.h> #include <getopt.h> #include <fcntl.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <errno.h> #include <time.h> #include <sys/ioctl.h> #include <sys/time.h> #include <sys/types.h> #include <linux/rtc.h> /* constants from legacy PC/AT hardware */ #define RTC_PF 0x40 #define RTC_AF 0x20 #define RTC_UF 0x10 /* * rtcwake -- enter a system sleep state until specified wakeup time. * * This uses cross-platform Linux interfaces to enter a system sleep state, * and leave it no later than a specified time. It uses any RTC framework * driver that supports standard driver model wakeup flags. * * This is normally used like the old "apmsleep" utility, to wake from a * suspend state like ACPI S1 (standby) or S3 (suspend-to-RAM). Most * platforms can implement those without analogues of BIOS, APM, or ACPI. * * On some systems, this can also be used like "nvram-wakeup", waking * from states like ACPI S4 (suspend to disk). Not all systems have * persistent media that are appropriate for such suspend modes. * * The best way to set the system's RTC is so that it holds the current * time in UTC. Use the "-l" flag to tell this program that the system * RTC uses a local timezone instead (maybe you dual-boot MS-Windows). */ static char *progname; #ifdef DEBUG #define VERSION "1.0 dev (" __DATE__ " " __TIME__ ")" #else #define VERSION "0.9" #endif static unsigned verbose; static int rtc_is_utc = -1; static int may_wakeup(const char *devname) { char buf[128], *s; FILE *f; snprintf(buf, sizeof buf, "/sys/class/rtc/%s/device/power/wakeup", devname); f = fopen(buf, "r"); if (!f) { perror(buf); return 0; } fgets(buf, sizeof buf, f); fclose(f); s = strchr(buf, '\n'); if (!s) return 0; *s = 0; /* wakeup events could be disabled or not supported */ return strcmp(buf, "enabled") == 0; } /* all times should be in UTC */ static time_t sys_time; static time_t rtc_time; static int get_basetimes(int fd) { struct tm tm; struct rtc_time rtc; /* this process works in RTC time, except when working * with the system clock (which always uses UTC). */ if (rtc_is_utc) setenv("TZ", "UTC", 1); tzset(); /* read rtc and system clocks "at the same time", or as * precisely (+/- a second) as we can read them. */ if (ioctl(fd, RTC_RD_TIME, &rtc) < 0) { perror("read rtc time"); return 0; } sys_time = time(0); if (sys_time == (time_t)-1) { perror("read system time"); return 0; } /* convert rtc_time to normal arithmetic-friendly form, * updating tm.tm_wday as used by asctime(). */ memset(&tm, 0, sizeof tm); tm.tm_sec = rtc.tm_sec; tm.tm_min = rtc.tm_min; tm.tm_hour = rtc.tm_hour; tm.tm_mday = rtc.tm_mday; tm.tm_mon = rtc.tm_mon; tm.tm_year = rtc.tm_year; tm.tm_isdst = rtc.tm_isdst; /* stays unspecified? */ rtc_time = mktime(&tm); if (rtc_time == (time_t)-1) { perror("convert rtc time"); return 0; } if (verbose) { if (!rtc_is_utc) { printf("\ttzone = %ld\n", timezone); printf("\ttzname = %s\n", tzname[daylight]); gmtime_r(&rtc_time, &tm); } printf("\tsystime = %ld, (UTC) %s", (long) sys_time, asctime(gmtime(&sys_time))); printf("\trtctime = %ld, (UTC) %s", (long) rtc_time, asctime(&tm)); } return 1; } static int setup_alarm(int fd, time_t *wakeup) { struct tm *tm; struct rtc_wkalrm wake; tm = gmtime(wakeup); wake.time.tm_sec = tm->tm_sec; wake.time.tm_min = tm->tm_min; wake.time.tm_hour = tm->tm_hour; wake.time.tm_mday = tm->tm_mday; wake.time.tm_mon = tm->tm_mon; wake.time.tm_year = tm->tm_year; wake.time.tm_wday = tm->tm_wday; wake.time.tm_yday = tm->tm_yday; wake.time.tm_isdst = tm->tm_isdst; /* many rtc alarms only support up to 24 hours from 'now' ... */ if ((rtc_time + (24 * 60 * 60)) > *wakeup) { if (ioctl(fd, RTC_ALM_SET, &wake.time) < 0) { perror("set rtc alarm"); return 0; } if (ioctl(fd, RTC_AIE_ON, 0) < 0) { perror("enable rtc alarm"); return 0; } /* ... so use the "more than 24 hours" request only if we must */ } else { /* avoid an extra AIE_ON call */ wake.enabled = 1; if (ioctl(fd, RTC_WKALM_SET, &wake) < 0) { perror("set rtc wake alarm"); return 0; } } return 1; } static void suspend_system(const char *suspend) { FILE *f = fopen("/sys/power/state", "w"); if (!f) { perror("/sys/power/state"); return; } fprintf(f, "%s\n", suspend); fflush(f); /* this executes after wake from suspend */ fclose(f); } int main(int argc, char **argv) { static char *devname = "rtc0"; static unsigned seconds = 0; static char *suspend = "standby"; int t; int fd; time_t alarm = 0; progname = strrchr(argv[0], '/'); if (progname) progname++; else progname = argv[0]; if (chdir("/dev/") < 0) { perror("chdir /dev"); return 1; } while ((t = getopt(argc, argv, "d:lm:s:t:uVv")) != EOF) { switch (t) { case 'd': devname = optarg; break; case 'l': rtc_is_utc = 0; break; /* what system power mode to use? for now handle only * standardized mode names; eventually when systems define * their own state names, parse /sys/power/state. * * "on" is used just to test the RTC alarm mechanism, * bypassing all the wakeup-from-sleep infrastructure. */ case 'm': if (strcmp(optarg, "standby") == 0 || strcmp(optarg, "mem") == 0 || strcmp(optarg, "disk") == 0 || strcmp(optarg, "on") == 0 ) { suspend = optarg; break; } printf("%s: unrecognized suspend state '%s'\n", progname, optarg); goto usage; /* alarm time, seconds-to-sleep (relative) */ case 's': t = atoi(optarg); if (t < 0) { printf("%s: illegal interval %s seconds\n", progname, optarg); goto usage; } seconds = t; break; /* alarm time, time_t (absolute, seconds since 1/1 1970 UTC) */ case 't': t = atoi(optarg); if (t < 0) { printf("%s: illegal time_t value %s\n", progname, optarg); goto usage; } alarm = t; break; case 'u': rtc_is_utc = 1; break; case 'v': verbose++; break; case 'V': printf("%s: version %s\n", progname, VERSION); break; default: usage: printf("usage: %s [options]" "\n\t" "-d rtc0|rtc1|...\t(select rtc)" "\n\t" "-l\t\t\t(RTC uses local timezone)" "\n\t" "-m standby|mem|...\t(sleep mode)" "\n\t" "-s seconds\t\t(seconds to sleep)" "\n\t" "-t time_t\t\t(time to wake)" "\n\t" "-u\t\t\t(RTC uses UTC)" "\n\t" "-v\t\t\t(verbose messages)" "\n\t" "-V\t\t\t(show version)" "\n", progname); return 1; } } if (!alarm && !seconds) { printf("%s: must provide wake time\n", progname); goto usage; } /* REVISIT: if /etc/adjtime exists, read it to see what * the util-linux version of hwclock assumes. */ if (rtc_is_utc == -1) { printf("%s: assuming RTC uses UTC ...\n", progname); rtc_is_utc = 1; } /* this RTC must exist and (if we'll sleep) be wakeup-enabled */ fd = open(devname, O_RDONLY); if (fd < 0) { perror(devname); return 1; } if (strcmp(suspend, "on") != 0 && !may_wakeup(devname)) { printf("%s: %s not enabled for wakeup events\n", progname, devname); return 1; } /* relative or absolute alarm time, normalized to time_t */ if (!get_basetimes(fd)) return 1; if (verbose) printf("alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n", alarm, sys_time, rtc_time, seconds); if (alarm) { if (alarm < sys_time) { printf("%s: time doesn't go backward to %s", progname, ctime(&alarm)); return 1; } alarm += sys_time - rtc_time; } else alarm = rtc_time + seconds + 1; if (setup_alarm(fd, &alarm) < 0) return 1; sync(); printf("%s: wakeup from \"%s\" using %s at %s", progname, suspend, devname, ctime(&alarm)); fflush(stdout); usleep(10 * 1000); if (strcmp(suspend, "on") != 0) suspend_system(suspend); else { unsigned long data; do { t = read(fd, &data, sizeof data); if (t < 0) { perror("rtc read"); break; } if (verbose) printf("... %s: %03lx\n", devname, data); } while (!(data & RTC_AF)); } if (ioctl(fd, RTC_AIE_OFF, 0) < 0) perror("disable rtc alarm interrupt"); close(fd); return 0; } This patch: Make rtc-cmos do the relevant magic so this RTC can wake the system from a sleep state. That magic comes in two basic flavors: - Straightforward: enable_irq_wake(), the way it'd work on most SOC chips; or generally with system sleep states which don't disable core IRQ logic. - Roundabout, using non-IRQ platform hooks. This is needed with ACPI and one almost-clone chip which uses a special wakeup-only alarm. (That's the RTC used on Footbridge boards, FWIW, which don't do PM in Linux.) A separate patch implements those hooks for ACPI platforms, so that rtc_cmos can issue system wakeup events (and its sysfs "wakealarm" attribute works on at least some systems). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: update vr41xx alarm handlingYoichi Yuasa
- vr41xx_rtc_read_alarm() reports alarm enabled. - vr41xx_rtc_set_alarm() sets alarm disable/enable by rtc_wkalrm.enabled. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08RTC Kconfig cleanupAlessandro Zummo
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: update to class device removal patchesDavid Brownell
Fix a goof in the revised classdev support for RTCs: make sure the /dev node info is ready before the device is registered, not after. Otherwise the /sys/class/rtc/rtcN/dev attribute won't be created and then udev won't have the information it needs to create the /dev/rtcN node. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08RTC: replace some newly-introduced macros with inlinesDavid Brownell
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: suspend()/resume() restores system clockDavid Brownell
RTC class suspend/resume support, re-initializing the system clock on resume from the clock used to initialize it at boot time. - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config option, on the grounds that a clock good enough for init must also be good enough for re-init. - Inlining a version of the code used by ARM, to save and restore the delta between a selected RTC and the current system wall-clock time. - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This means that systems using those RTCs across suspend/resume will likely want to change their kernel configs to enable RTC_HCTOSYS. If HCTOSYS isn't using a second RTC (with battery?), this changes the system's initial date from Jan 1970 to the epoch this hardware uses: 1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc. This goes on top of the patch series removing "struct class_device" usage from the RTC framework. That's all needed for class suspend()/resume(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: remove rest of class_deviceDavid Brownell
Finish converting the RTC framework so it no longer uses class_device. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>