aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-03-05can: kvaser_usb: check number of channels returned by HWOlivier Sobrie
commit 862474f8b46f6c1e600d4934e40ba40646c696ec upstream. It is needed to check the number of channels returned by the HW because it cannot be greater than MAX_NET_DEVICES otherwise it will crash. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtlwifi: rtl8192ce: Fix too long disable of IRQsOlivier Langlois
commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 upstream. rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtlwifi: Fix incorrect return from rtl_ps_enable_nic()Olivier Langlois
commit 2e8c5e56b307271c2dab6f8bfd1d8a3822ca2390 upstream. rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtl8187: fix regression on MIPS without coherent DMAStanislaw Gruszka
commit b6213e413a4e0c66548153516b074df14f9d08e0 upstream. This patch fixes regression caused by commit a16dad77634 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391 Reported-by: Petr Pisar <petr.pisar@atlas.cz> Bisected-by: Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Larry Finger <Larry.Finger@lwfinger.next> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26bonding: 802.3ad: make aggregator_identifier bond-privateJiri Bohac
[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ] aggregator_identifier is used to assign unique aggregator identifiers to aggregators of a bond during device enslaving. aggregator_identifier is currently a global variable that is zeroed in bond_3ad_initialize(). This sequence will lead to duplicate aggregator identifiers for eth1 and eth3: create bond0 change bond0 mode to 802.3ad enslave eth0 to bond0 //eth0 gets agg id 1 enslave eth1 to bond0 //eth1 gets agg id 2 create bond1 change bond1 mode to 802.3ad enslave eth2 to bond1 //aggregator_identifier is reset to 0 //eth2 gets agg id 1 enslave eth3 to bond0 //eth3 gets agg id 2 Fix this by making aggregator_identifier private to the bond. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26usbnet: remove generic hard_header_len checkEmil Goode
[ Upstream commit eb85569fe2d06c2fbf4de7b66c263ca095b397aa ] This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: asix: add missing flag to struct driver_infoEmil Goode
[ Upstream commit d43ff4cd798911736fb39025ec8004284b1b0bc2 ] The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26tg3: Fix deadlock in tg3_change_mtu()Nithin Sujir
[ Upstream commit c6993dfd7db9b0c6b7ca7503a56fda9236a4710f ] Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: qmi_wwan: add Netgear Aircard 340UBjørn Mork
[ Upstream commit fbd3a77d813f211060f86cc7a2f8416caf0e03b1 ] This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26can: add destructor for self generated skbsOliver Hartkopp
[ Upstream commit 0ae89beb283a0db5980d1d4781c7d7be2f2810d6 ] Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but no explicit destructor which is enforced since Linux 3.11 with commit 376c7311bdb6 (net: add a temporary sanity check in skb_orphan()). This patch adds some helper functions to make sure that a destructor is properly defined when a sock reference is assigned to a CAN related skb. To create an unshared skb owned by the original sock a common helper function has been introduced to replace open coded functions to create CAN echo skbs. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Andre Naujoks <nautsch2@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-22iwlwifi: mvm: BT Coex - disable BT when TXing probe request in scanEmmanuel Grumbach
commit 8e2a866ef214af4e104ec8d593e3269d8fe66d19 upstream. Not doing so will let BT kill our probe requests leading to failures in scan. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22iwlwifi: mvm: print the version of the firmware when it assertsEmmanuel Grumbach
commit b900a87b2eb90c0b9586496c82a323a1b8832d73 upstream. This can be useful to be able to spot the firmware version from the error reports without needing to fetch it from another place. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22iwlwifi: mvm: don't allow A band if SKU forbids itEmmanuel Grumbach
commit c512865446e6dd5b6e91e81187e75b734ad7cfc7 upstream. The driver wasn't reading the NVM properly. While this didn't lead to any issue until now, it seems that there is an old version of the NVM in the wild. In this version, the A band channels appear to be valid but the SKU capabilities (another field of the NVM) says that A band isn't supported at all. With this specific version of the NVM, the driver would think that A band is supported while the HW / firmware don't. This leads to asserts. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ar5523: fix usb id for Gigaset.Oleksij Rempel
commit 4fcfc7443d072582b5047b8b391d711590e5645c upstream. Raw id and FW id should be switched. Tested-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k: Do not support PowerSave by defaultSujith Manoharan
commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream. Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k_htc: Do not support PowerSave by defaultOleksij Rempel
commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream. It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22ath9k_htc: make ->sta_rc_update atomic for most callsStanislaw Gruszka
commit 2fa4cb905605c863bf570027233af7afd8149ae4 upstream. sta_rc_update() callback must be atomic, hence we can not take mutexes or do other operations, which can sleep in ath9k_htc_sta_rc_update(). I think we can just return from ath9k_htc_sta_rc_update(), if it is called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help with scheduling while atomic bug for most cases (except mesh and IBSS modes). For mesh and IBSS I do not see other solution like creating additional workqueue, because sending firmware command require us to sleep, but this can be done in additional patch. Patch partially fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=990955 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk
commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream. The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06xen-netfront: fix resource leak in netfrontAnnie Li
[ Upstream commit cefe0078eea52af17411eb1248946a94afb84ca5 ] This patch removes grant transfer releasing code from netfront, and uses gnttab_end_foreign_access to end grant access since gnttab_end_foreign_access_ref may fail when the grant entry is currently used for reading or writing. * clean up grant transfer code kept from old netfront(2.6.18) which grants pages for access/map and transfer. But grant transfer is deprecated in current netfront, so remove corresponding release code for transfer. * fix resource leak, release grant access (through gnttab_end_foreign_access) and skb for tx/rx path, use get_page to ensure page is released when grant access is completed successfully. Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches for them will be created separately. V6: Correct subject line and commit message. V5: Remove unecessary change in xennet_end_access. V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in single patch. V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill grant acess is ended. V2: Improve patch comments. Signed-off-by: Annie Li <annie.li@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06net/vxlan: Share RX skb de-marking and checksum checks with ovsOr Gerlitz
[ Upstream commit d0bc65557ad09a57b4db176e9e3ccddb26971453 ] Make sure the practice set by commit 0afb166 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06net,via-rhine: Fix tx_timeout handlingRichard Weinberger
[ Upstream commit a926592f5e4e900f3fa903298c4619a131e60963 ] rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06net: usbnet: fix SG initialisationBjørn Mork
[ Upstream commit fdc3452cd2c7b2bfe0f378f92123f4f9a98fa2bd ] Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06bnx2x: fix DMA unmapping of TSO split BDsMichal Schmidt
[ Upstream commit 95e92fd40c967c363ad66b2fd1ce4dcd68132e54 ] bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920() bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000000da2b389e] [map size=1490 bytes] [unmap size=66 bytes] The reason is that bnx2x splits a TSO BD into two BDs (headers + data) using one DMA mapping for both, but it uses only the length of the first BD when unmapping. This patch fixes the bug by unmapping the whole length of the two BDs. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06ath9k: Disable cross-band FCCSujith Manoharan
commit 1e2f9295f4c657500111514f92a3d3894d0e05b4 upstream. Fast Channel Change across bands was enabled for AR9462 recently, but this is causing baseband issues. Disable it until this feature is tested well. Also, remove the feature bit for AR9565 since it is a single-band card and doesn't support this feature. Reported-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06ath9k: Use correct channel for RX packetsSujith Manoharan
commit ff9a93f2ebb88ac7aab9568de80b64b92078e96d upstream. Accessing the current channel definition in mac80211 when processing RX packets is problematic because it could have been updated when a scan is issued. Since a channel change involves flushing the existing packets in the RX queue before a chip-reset is done, they would be processed using the wrong band/channel information. To avoid this, use the current channel information maintained in the driver. Reported-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: fix the wrong assignment of status.freq in b43_rx()ZHAO Gang
commit 64e5acb09ca6b50c97299cff9ef51299470b29f2 upstream. Use the right function to update frequency value. If rx skb is probe response or beacon, the wrong frequency value can cause problem that bss info can't be updated when it should be. Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211 and driver conversion") Signed-off-by: ZHAO Gang <gamerh2o@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43legacy: Fix unload oops if firmware is not availableLarry Finger
commit 452028665312672c6ba9e16a19248ee00ead9400 upstream. The asyncronous firmware load uses a completion struct to hold firmware processing until the user-space routines are up and running. There is. however, a problem in that the waiter is nevered canceled during teardown. As a result, unloading the driver when firmware is not available causes an oops. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: Fix unload oops if firmware is not availableLarry Finger
commit 0673effd41dba323d6a280ef37b5ef29f3f5a653 upstream. The asyncronous firmware load uses a completion struct to hold firmware processing until the user-space routines are up and running. There is. however, a problem in that the waiter is nevered canceled during teardown. As a result, unloading the driver when firmware is not available causes an oops. To be able to access the completion structure at teardown, it had to be moved into the b43_wldev structure. This patch also fixes a typo in a comment. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06b43: Fix lockdep splatLarry Finger
commit 09164043f63c947a49797750a09ca1cd7c31108e upstream. In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported when b43 is used with hostapd, and rfkill is used to kill the radio output. The lockdep splat (in part) is as follows: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0 #1 Not tainted ------------------------------------------------------- rfkill/10040 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff8146f282>] rtnl_lock+0x12/0x20 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa04832ca>] rfkill_fop_write+0x6a/0x170 [rfkill] --snip-- Chain exists of: rtnl_mutex --> misc_mtx --> rfkill_global_mutex The fix is to move the initialization of the hardware random number generator outside the code range covered by the rtnl_mutex. Reported-by: yury <urykhy@gmail.com> Tested-by: yury <urykhy@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06iwlwifi: mvm: fix missing cleanup in .start() error pathEliad Peller
commit 91b0d1198417cf4fd9a7bd4138b6909f0b359099 upstream. Cleanup of iwl_mvm_leds was missing in case of error, resulting in the following warning: WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210() kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory. which prevents further reloads of the driver. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06iwlwifi: pcie: enable oscillator for L1 exitEmmanuel Grumbach
commit 2d93aee152b1758a94a18fe15d72153ba73b5679 upstream. Enabling the oscillator consumes slightly more power (100uA) but allows to make sure that we exit from L1 on time. Not doing so might lead to a PCIe specification violation since we might wake up from L1 at the wrong time. This issue has been identified on 3160 and 7260 only. On older NICs L1 off is not enabled, on newer NICs (7265), the issue is fixed. When the bug occurs the user sees that the NIC has disappeared from the PCI bridge, any access to the device returns 0xff. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64541 and has been extensively discussed here: http://markmail.org/thread/mfmpzqt3r333n4bo Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reported-and-tested-by: wzyboy <wzyboy@wzyboy.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06mwifiex: fix wrong 11ac bits setting in fw_cap_infoBing Zhao
commit 1e202242ee1432d68a8bea4919b2ae0ef19d9e06 upstream. bit 14 is actually reserved and bit 12 & 13 should be used for 11ac capability in fw_cap_info. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06mwifiex: add missing endian conversion for fw_tsfAmitkumar Karwar
commit 9795229752c31da0c5f8a7dc4c827665327b52f9 upstream. It is u64 data received from firmware. Little endian to cpu conversion is required here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8188ee: Fix typo in codeLarry Finger
commit f699273d6a624266ebc9198774f06ee64a3847a1 upstream. The static analyser "cppcheck" shows the following typo: drivers/net/wireless/rtlwifi/rtl8188ee/dm.c:1081]: (style) Same expression on both sides of '!='. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: Add missing code to PWDB statics routineLarry Finger
commit d82403a9f407217b6aed5260aa92a120e8e98310 upstream. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192cu: Fix some code in RF handlingLarry Finger
commit e9b0784bb9de3152e787ee779868c626b137fb3b upstream. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192cu: Update the power index registersLarry Finger
commit 9806eacf5de27ab01d680c5d75c92a3a89734e4f upstream. This patch uses the newly introduced power index register routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192c: Add routines to save/restore power index registersLarry Finger
commit 97204e93f01868eeba6ae5c4f3270f32905bb418 upstream. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: Increase the RX queue length for USB driversLarry Finger
commit dc6405712268fe514d3dd89aa936c4397b0871b9 upstream. The current number of RX buffers queued is 32, which is too small under heavy load. That number is doubled. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192c: Add new definitions in the dm_common headerLarry Finger
commit c908c74e005de780fddbe8cb6fcd44803f5d4b74 upstream. Changes in the gain-control mechanism will require some changes in the header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: Set the link stateLarry Finger
commit 619ce76f8bb850b57032501a39f26aa6c6731c70 upstream. The present code fails to set the linked state when an interface is added. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: Redo register save locationsLarry Finger
commit b9a758a8c905fc59e783ae91ad645452d877ea88 upstream. The initial USB driver did not use some register save locations in the private data storage. To save some memory, a union was used to overlay these variables with USB I/O components. In an update of the gain-control code, these register save locations are now needed for USB drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192cu: Add new firmwareLarry Finger
commit 62009b7f12793c932aaba0df946b04cb4a77d022 upstream. Vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404 introduced new firmware for these chips. The code try for the new file, and fall back to the original firmware if the new file is not available. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192c: Prevent reconnect attempts if not connectedLarry Finger
commit 8fd77aec1a9d6f4328fc0244f21932114e066df3 upstream. This driver has a watchdog timer that attempts to reconnect when beacon frames are not seen for 6 seconds. This patch disables that reconnect whenever the device has never been connected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: Update beacon statistics for USB driverLarry Finger
commit 65b9cc97c6852fae19dc5c7745e9abc8dd380aad upstream. The USB drivers were not updating the beacon statistics, which led to false beacon loss indications. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06rtlwifi: rtl8192cu: Add new device IDLarry Finger
commit f87f960b2fb802f26ee3b00c19320e57a9c583ff upstream. Reported-by: Jan Prinsloo <janroot@gmail.com> Tested-by: Jan Prinsloo <janroot@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06e1000e: fix compiler warningsDavid Ertman
commit 9e6c3b63399dd424d33a34e08b77f2cab0b84cdc upstream. This patch is to fix a compiler warning of __bad_udelay due to a value of >999 being passed as a parameter to udelay() in the function e1000e_phy_has_link_generic(). This affects the gcc compiler when it is given a flag of -O3 and the icc compiler. This patch is also making the change from mdelay() to msleep() in the same function, since it was determined though code inspection that this function is never called in atomic context. Signed-off-by: David Ertman <davidx.m.ertman@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sfc: Poll for MCDI completion once before timeout occursRobert Stonehouse
[ Upstream commit 6b294b8efedaa7cf7507154148e2c79766ad6f96 ] There is an as-yet unexplained bug that sometimes prevents (or delays) the driver seeing the completion event for a completed MCDI request on the SFC9120. The requested configuration change will have happened but the driver assumes it to have failed, and this can result in further failures. We can mitigate this by polling for completion after unsuccessfully waiting for an event. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sfc: Refactor efx_mcdi_poll() by introducing efx_mcdi_poll_once()Robert Stonehouse
[ Upstream commit 5731d7b35e5b87157a9b9973cc2eff70c50aec58 ] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sfc: RX buffer allocation takes prefix size into account in IP header alignmentAndrew Rybchenko
[ Upstream commit 2ec030144f648a6dd208f95f55ece212f1b72771 ] rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 13:21:02 +0000