aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-11-14Sweep the last of the active .get_drvinfo floors under ethernet/Rick Jones
This round of floor sweeping converts strncpy calls in various .get_drvinfo routines to the preferred strlcpy. It also does a modicum of other cleaning in those routines. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14bnx2x: uses build_skb() in receive pathEric Dumazet
bnx2x uses following formula to compute its rx_buf_sz : dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2 Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64, MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes. Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of false sharing because of mem_reclaim in UDP stack. One possible way to half truesize is to reduce the need by 64 bytes (2112 -> 2048 bytes) Instead of allocating a full cache line at the end of packet for alignment, we can use the fact that skb_shared_info sits at the end of skb->head, and we can use this room, if we convert bnx2x to new build_skb() infrastructure. skb_shared_info will be initialized after hardware finished its transfert, so we can eventually overwrite the final padding. Using build_skb() also reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are recycled while still hot. Performance results : (820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Tom Herbert <therbert@google.com> CC: Jamal Hadi Salim <hadi@mojatatu.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Thomas Graf <tgraf@infradead.org> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net: fsl_pq_mdio: fix non tbi phy accessBaruch Siach
Since 952c5ca1 (fsl_pq_mdio: Clean up tbi address configuration) .probe returns -EBUSY when the "tbi-phy" node is missing. Fix this. Cc: Andy Fleming <afleming@freescale.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/can/mscan: add listen only modeMarc Kleine-Budde
This patch adds listen only mode to the mscan controller. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Sweep additional floors of strcpy in .get_drvinfo routinesRick Jones
Perform another round of floor sweeping, converting the .get_drvinfo routines of additional drivers from strcpy to strlcpy along with some conversion of sprintf to snprintf. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14fsl_pq_mdio: Clean up tbi address configurationAndy Fleming
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net-forcedeth: Add internal loopback support for forcedeth NICs.Sanjay Hortikar
Support enabling/disabling/querying internal loopback mode for forcedeth NICs using ethtool. Signed-off-by: Sanjay Hortikar <horti@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13net: introduce ethernet teaming deviceJiri Pirko
This patch introduces new network device called team. It supposes to be very fast, simple, userspace-driven alternative to existing bonding driver. Userspace library called libteam with couple of demo apps is available here: https://github.com/jpirko/libteam Note it's still in its dipers atm. team<->libteam use generic netlink for communication. That and rtnl suppose to be the only way to configure team device, no sysfs etc. Python binding of libteam was recently introduced. Daemon providing arpmon/miimon active-backup functionality will be introduced shortly. All what's necessary is already implemented in kernel team driver. v7->v8: - check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling them. - use dev_kfree_skb_any() instead of dev_kfree_skb() v6->v7: - transmit and receive functions are not checked in hot paths. That also resolves memory leak on transmit when no port is present v5->v6: - changed couple of _rcu calls to non _rcu ones in non-readers v4->v5: - team_change_mtu() uses team->lock while travesing though port list - mac address changes are moved completely to jurisdiction of userspace daemon. This way the daemon can do FOM1, FOM2 and possibly other weird things with mac addresses. Only round-robin mode sets up all ports to bond's address then enslaved. - Extended Kconfig text v3->v4: - remove redundant synchronize_rcu from __team_change_mode() - revert "set and clear of mode_ops happens per pointer, not per byte" - extend comment of function __team_change_mode() v2->v3: - team_change_mtu() uses rcu version of list traversal to unwind - set and clear of mode_ops happens per pointer, not per byte - port hashlist changed to be embedded into team structure - error branch in team_port_enter() does cleanup now - fixed rtln->rtnl v1->v2: - modes are made as modules. Makes team more modular and extendable. - several commenters' nitpicks found on v1 were fixed - several other bugs were fixed. - note I ignored Eric's comment about roundrobin port selector as Eric's way may be easily implemented as another mode (mode "random") in future. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: update driver version to 1.70.35-0Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: Remove on-stack napi struct variableAriel Elior
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: prevent race in statistics flowDmitry Kravkov
The race may cause access of registers while MAC hw block is in reset state. As a result syslog will show error messages. We can prevent this by using state from local variable. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: add fan failure event handlingAriel Elior
Shut down the device in case of fan failure to prevent HW damage. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: remove unused #defineDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: simplify definition of RX_SGE_MASK_LEN and use it.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: DCBX: use #define instead of magicDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: propagate DCBX negotiationDmitry Kravkov
We need propagate the DCBX results from PMF to other functions on the same port, in order to properly update netdev structure and allow following new ETS and PFC configurations. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: separate FCoE and iSCSI license initialization.Dmitry Kravkov
FCoE license info must be initialized at probe(), but iSCSI at open(). Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: remove unused variableDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: use rx_queue index for skb_record_rx_queue()Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: allow FCoE and DCB for 578xxDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: stop issuing FW cmds if any cmd times outSathya Perla
A FW cmd timeout (with a sufficiently large timeout value in the order of tens of seconds) indicates an unresponsive FW. In this state issuing further cmds and waiting for a completion will only stall the process. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: don't log more than one error on detecting EEH/UE errorsSathya Perla
Currently we're spamming error messages each time a FW cmd call is made while in EEH/UE error state. One log msg on error detection is enough. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: stop checking the UE registers after an EEH errorSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenariosSathya Perla
Initialize if_handle, vf_if_handle and vf_pmac_id with "-1" so that in failure cases when be_clear() is called, we can skip over if_destroy/pmac_del cmds if they have not been created. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08ll_temac: Add support for phy_mii_ioctlRicardo Ribalda
This patch enables the ioctl support for the driver. So userspace programs like mii-tool can work. Resend in merge window Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones
Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08net: better pcpu data alignmentEric Dumazet
Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sunhme: Allow usage on SBI based SBus systemsoftedal
To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08Fix incorrect usage of NET_IP_ALIGNNico Erfurth
The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <ne@erfurth.eu> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08r8169: increase the delay parameter of pm_schedule_suspendhayeswang
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07forcedeth: fix a few sparse warnings (variable shadowing)david decotigny
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Improve stats countersMandeep Baines
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07usbnet: fix oops in usbnet_start_xmitKonstantin Khlebnikov
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
2011-11-06Merge branch 'stable/vmalloc-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: net: xen-netback: use API provided by xenbus module to map rings block: xen-blkback: use API provided by xenbus module to map rings xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-04bonding: comparing a u8 with -1 is always falseDan Carpenter
slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04sky2: fix regression on Yukon Optimastephen hemminger
Changes to support other Optima types, introduced an accidental regression that caused 88E8059 to come up in 10Mbit/sec. The Yukon Optima supports a reverse auto-negotiation feature that was incorrectly setup, and not needed. The feature could be used to allow wake-on-lan at higher speeds. But doing it correctly would require other changes to initialization. Reported-by: Pavel Mateja <pavel@netsafe.cz> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04i825xx:xscale:8390:freescale: Fix Kconfig dependanciesJeff Kirsher
i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so NET_VENDOR_INTEL should contain ALL the dependencies of the "sub" Kconfigs. Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so NET_VENDOR_NATSEMI needs to contains ALL the dependencies. Freescale Kconfig only had fs_enet as a sub Kconfig, and already contained the needed dependencies, just cleaned up the dependencies. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04macvlan: receive multicast with local addressstephen hemminger
When implementing VRRP v2 using macvlan several problems were discovered. VRRP is weird in that all routers participating in a redundant group use the same virtual MAC address. Macvlan is a natural driver to use for this but it doesn't work. The problem is that packets with a macvlan device's source address are not received. The problem is actually a regression that date back almost 2 years now. The original problems started with: commit 618e1b7482f7a8a4c6c6e8ccbe140e4c331df4e9 Author: Arnd Bergmann <arnd@arndb.de> Date: Thu Nov 26 06:07:10 2009 +0000 macvlan: implement bridge, VEPA and private mode This patches restores the original 2.6.32 behavior. Allowing multicast packets received with the VRRP source address to be received. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Update version to 3.121Matt Carlson
This patch updates the tg3 version to 3.121. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Eliminate timer race with reset_taskMatt Carlson
During shutdown, it is impossible to reliably disable the timer and reset_task threads. Each thread can schedule the other, which leads to shutdown code that chases its tail. To fix the problem, this patch removes the ability of tg3_reset_task to schedule a new timer thread. To support this change, tg3_timer no longer terminates itself, but rather goes into a polling mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Schedule at most one tg3_reset_task runMatt Carlson
It is possible for multiple threads in the tg3 driver to each attempt to schedule a run of tg3_reset_task(). The multiple tg3_reset_task executions could all wind up on the same queue (and execute serially) or wind up on the queues of another processor (which could execute in parallel). Either scenario is not what was truly desired. This patch adds a new flag, TG3_FLAG_RESET_TASK_PENDING, and uses it to determine whether or not to schedule another run of tg3_reset_task(). With the new flag comes two new functions to facilitate scheduling and descheduling of tg3_reset_task(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Obtain PCI function number from deviceMatt Carlson
This patch adds code to attempt to obtain the PCI function number from the device rather than accept the number handed by the kernel. In pass-through scenarios, the function number handed by the kernel may not reflect the true function of the device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>