aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2014-07-25ixgbevf: Remove unused get_supported_physical_layer pointerMark Rustad
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Delete a bunch of dead codeMark Rustad
All of the code involved with returning the supported physical layer is actually unused, so delete it. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Fix ixgbe_write_mbx error resultMark Rustad
If ixgbe_write_mbx is called and no mbx->ops.write method exists, no error code is returned. The corresponding read function explicitly returns an error in such a case as do other functions, so this appears to be a minor bug. Fix it for consistency, and generate return values directly to make things clearer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Correct X540 semaphore errorMark Rustad
In the function ixgbe_get_swfw_sync_semaphore, an incorrect check was treating success as failure and vice-versa. This led to manipulating the IXGBE_SWFW_SYNC register without holding the software semaphore first, which is an error. In addition, if getting the REGSMP bit in the IXGBE_SW_FW_SYNC register timed out, no error code would be returned, making the caller think that it had successfully acquired the lock. Fix both of those issues and clean up the function a bit, such as make the name in the comment match the function. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Fix spurious release of semaphore in EEPROM accessMark Rustad
Failure to acquire the semaphore would lead to a spurious release of the semaphore in several functions. Do not release a semaphore that you did not get. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Convert some udelays to usleep_rangeMark Rustad
Convert some udelay calls to the preferred usleep_range. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24net/macb: enable scatter-gather feature and set DMA burst length for sama5d4 gemCyrille Pitchen
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net/macb: add RX checksum offload featureCyrille Pitchen
When RX checksum offload is enabled at GEM level (bit 24 set in the Network Control Register), frames with invalid IP, TCP or UDP checksums are discarted even if promiscuous mode is enabled (bit 4 set in the Network Control Register). This was verified with a simple userspace program, which corrupts UDP checksum using libnetfilter_queue. Then both IFF_PROMISC bit must be clear in dev->flags and NETIF_F_RXCSUM bit must be set in dev->features to enable RX checksum offload at GEM level. This way tcpdump is still able to capture corrupted frames. Also skb->ip_summed is set to CHECKSUM_UNNECESSARY only when both TCP/IP or UDP/IP checksums were verified by the GEM. Indeed the GEM may verify only IP checksum but not the one for ICMP (or other protocol than TCP or UDP). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net/macb: add TX checksum offload featureCyrille Pitchen
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net/macb: add scatter-gather hw featureCyrille Pitchen
The scatter-gather feature will allow to enable the Generic Segmentation Offload. Generic Segmentation Offload can be enabled/disabled using ethtool -K DEVNAME gso on|off. e.g: ethtool -K eth0 gso off When enabled, the driver may be provided with socket buffers splitted into many fragments. These fragments need to be queued into the TX ring in reverse order, starting from to the last one down to the first one, to avoid a race condition with the MAC. Especially the 'TX_USED' bit in word 1 of the transmit buffer descriptor of the first fragment should be cleared at the very final step of the queueing algorithm. This will tell the hardware that fragments are ready to be sent. Also since the MAC only update the status word of the first buffer descriptor of the ethernet frame, the queueing algorithm can no longer expect a 'TX_USED' bit to be set by the MAC into the buffer descriptor following the one for last fragment of the skb. This is why the driver sets the 'TX_USED' bit before queueing any fragment, so the end of queue position is well defined for the MAC. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net/macb: configure for FIFO mode and non-gigabitNicolas Ferre
This addition will also allow to configure DMA burst length. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24drivers: net: cpsw: cleanup: remove unused functionMugunthan V N
removing unused function as part of driver cleanup.` Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24net/mlx4_en: mlx4_en_[gs]et_priv_flags() can be staticFengguang Wu
Fixes sparse warning intrduced by commit 0fef9d0 ("net/mlx4_en: Disable blueflame using ethtool private flags") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24bfin_mac: convert bfin Ethernet driver to NAPI frameworkSonic Zhang
Ethernet RX DMA buffers are polled in NAPI work queue other than received directly in DMA RX interrupt handler. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24cxgb4: Fixed incorrect check for memory operation in t4_memory_rwHariprasad Shenai
Fix incorrect check introduced in commit fc5ab020 ("cxgb4: Replaced the backdoor mechanism to access the HW memory with PCIe Window method"). We where checking for write operation and doing a read, changed it accordingly. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24fec: Simplify the PM related hooksFabio Estevam
Get rid of the CONFIG_PM_SLEEP ifdef by annotating the suspend/resume functions with '__maybe_unused' in order to keep the code simpler and shorter. While at it, declare the suspend/resume functions in a single line. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24i40e: always print aqtx answerShannon Nelson
Sometimes the AQTX answer comes back with no data, but we still want to print the descriptor that got written back. Change-ID: I5f734d99b4c95510987413893f0a34626571d474 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e: Give link more time after setting flow controlCatherine Sullivan
Give link a little more time to come back up after setting flow control before resetting. In the new NVMs it is taking longer for link to come back. This causes the driver to attempt to reset the link, which then errors because the firmware was already in the middle of a reset. Also, initialize err to 0. Change-ID: I1cc987a944e389d8909c262da5796f50722b4d6b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jmyoungx@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e: Fix firmware API version errorsCatherine Sullivan
Reword the error messages. Also add a major version check because We only want to warn on nvm_minor > expected_minor if nvm_major == expected_major. Lastly, change an if to an else if because the two statements will never evaluate to true at the same time. Change-ID: I6ddf9986f26b35f6879cbeac4fcef04a8497a383 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: ARQ copy desc data even for failed commandsKamil Krawczyk
Copy desc and buffer data even for ARQ events which return error status. Previously, a check for NVM related AQ commands which is done later in this function would not recognize that such a command was received and would not clear nvm_busy flag. This would block access to NVM until a driver reset. This will fix that. Change-ID: If69ad74e165b56081c0686b97402511d2e2880c0 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40evf: don't wait so longMitch Williams
We really don't need to delay an entire millisecond just to get into our critical section. A microsecond will be sufficient, thank you. Change-ID: I2d02ece6610007d98cabcb3f42df9a774bb54e59 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: fix extension header csum logicJesse Brandeburg
The hardware design requires that the driver avoid indicating checksum offload success on some ipv6 frames with extension headers. The code needs to just check for the IPV6EXADD bit and if it is set punt the checksum to the stack. I don't know why the code was checking TCP on inner protocol, as that code doesn't make any sense to me but seems wrong, so remove it. Change-ID: I10d3aacdbb1819fb60b4b0eb80e6cc67ef2c9599 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: Add nvmupdate supportShannon Nelson
This implements a state machine intended to support the userland tool for updating the device eeprom. The state machine implements one-shot reads, writes, multi-step write sessions, and checksum requests. If we're in the middle of a multi-step write session, no one should fire off other writes, however, one shot reads are valid. The userland tool is expected to keep track of its session status, arrange the placement and ordering of the writes, and deal with the checksum requirement. This patch also adds nvmupdate support to ethtool callbacks. The get_eeprom() and set_eeprom() services in ethtool are used here to facilitate the userland NVMUpdate tool. The 'magic' value in the get and set commands is used to pass additional control information for managing the read and write steps. The read operation works both as normally expected in the standard ethtool method, as well as with the extra NVM controls. The write operation works only for the expanded NVM functions - the normal ethtool method is not allowed because of the NVM semaphore management needed for multipart writes, as well as the checksum requirement. Change-ID: I1d84a170153a9f437906744e2e350fd68fe7563d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e: fix format mismatch in drivers/net/ethernet/intel/i40e/i40e_debugfs.cToralf Förster
spotted by cppcheck Signed-off-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24igb: bump igb version to 5.2.13Todd Fujinaka
Bump version number. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24igb: Add message when malformed packets detected by hwCarolyn Wyborny
This patch adds a check and prints the error cause register value when the hardware detects a malformed packet. This is a very unlikely scenario but has been seen occasionally, so printing the message to assist the user. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24ixgbe: don't check minimum link when direct assigned to virtual machineJacob Keller
This patch prevents the display of the minimum link qualification check if we might be in a virtual machine. This check is incorrect and misleading in this case, since we actually don't really know what the available bandwidth is. To do so, we simply check whether each function on the bus matches our device id. If it doesn't the most likely scenario is that we're directly assigned to a virtual machine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24ixgbe: fix use of list_for_each in ixgbe_enumerate_functionsJacob Keller
Fix a bug in the misuse of the list_for_each macro to loop over every entry in the bus_list. Instead of attempting to loop over the list from a random entry point, go up to the bus and use the real list_head entry point. This prevents the possible read or write of unallocated or incorrectly addressed memory. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24ixgbe: Change some uses of strncpy to strlcpyMark Rustad
Change some uses of strncpy to use the more appropriate strlcpy when clearing is not needed to prevent information leakage. Also change some length arguments to use the preferred sizeof form. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24ixgbe: Fix possible null-dereference in error pathMark Rustad
In ixgbe_probe, the code at label err_dma can dereference adapter when it has a NULL value. The check is there to avoid disabling a disabled device. When adapter is NULL, treat it as if the device is enabled, because it is enabled in that case. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-23net: bcmgenet: use kcalloc instead of kzallocFlorian Fainelli
There were two places that used kzalloc() with a multiplied sizeof(), replace these with kcalloc as recommended by checkpatch.pl. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23net: bcmgenet: add missing braces to some if statementsFlorian Fainelli
checkpatch.pl flagged two locations that did not comply to "CHECK: braces {} should be used on all arms of this statement", fix them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23net: bcmgenet: add and remove missing blank linesFlorian Fainelli
checkpatch.pl flagged two blank lines which are not needed, and one that was missing, fix them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23net: bcmgenet: re-align multiple lines correctlyFlorian Fainelli
checkpatch.pl flagged a lot of "CHECK: Alignment should match open parenthesis" checks, fix all of them to make the driver neater. While at it fix some obvious typos and re-arrange some of the lines to avoid going over 80 columns. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23net: bcmgenet: remove FSF mail addressFlorian Fainelli
Use a smaller GPLv2 header and remove all the boilerplate code as well as the FSF mail address. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23ethernet: realtek: use pci_device_idVarka Bhadram
This patch use the struct pci_device_id instead of using macro DEFINE_PCI_DEVICE_TABLE which is deprecated and should not be used. And also moves these ids after probe and remove functionalities. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-23ethernet: realtek: use module_pci_driverVarka Bhadram
This patch converts to use the macro module_pci_driver, which makes the code smaller and simpler. Previously in this driver we are having driver version info will be printed log buffer based on whether the driver selected as module or statically into image itself. By using the module_pci_driver that part of the code removed. For the first time of the device init, we are making the version info to be printed once. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22drivers: net: cpsw: add support to dump ALE table via ethtool register dumpMugunthan V N
Add support to view addresses added by the driver and learnt by the hardware from ALE table via ethtool register dump interface. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22sfc: Add support for busy pollingAlexandre Rames
This patch adds the sfc driver code for implementing busy polling. It adds ndo_busy_poll method and locking between it and napi poll. It also adds each napi to the napi_hash right after netif_napi_add(). Uses efx_start_eventq and efx_stop_eventq in the self tests. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_en: Reduce memory consumption on kdump kernelAmir Vadai
When memory is limited, reduce number of rx and tx rings. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_core: Use low memory profile on kdump kernelAmir Vadai
When running in kdump kernel, reduce number of resources allocated for the hardware. This will enable the NIC to operate in this low memory environment at the expense of performance and some features not related to the basic NIC functionality. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_en: Disable blueflame using ethtool private flagsAmir Vadai
Enable the user to turn off the hardware feature called BlueFlame. Since it is something specific to mlx4_en hardware, we control the feature via ethtool private flags. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net/mlx4_en: current_mac isn't updated in port upEyal Perry
When port is down dev_addr is changed (e.g. by bonding) but current_mac is not touched. When port is up again, hash_mac is updated to dev_addr, but current_mac isn't. This leads to inconsistency between current_mac and mac_hash. Because of that, mlx4_en_replace_mac() fails to find current_mac in mac_hash. Fix is to reset current_mac to dev_addr when port is up - as we do for mac_hash. Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net: mvpp2: Simplify BM pool buffers freeingEzequiel Garcia
Now that all the users of mvpp2_bm_bufs_free() have been fixed, we can safely clean the function prototype. The function is always called to release all the buffers in a BM pool, and the number of buffers freed is not needed. Therefore, we change the return to a void, and remove the "num" parameter. This is a cosmetic change, to make the code slightly cleaner. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net: mvpp2: Fix the BM pool buffer release checkEzequiel Garcia
After a call to mvpp2_bm_bufs_free(), the caller usually wants to know if the function successfully freed the requested number. However, this cannot be done by looking into the BM pool count, because the current buffer count was updated by mvpp2_bm_bufs_free(). In fact, the current callers of mvpp2_bm_bufs_free() use it to release all the buffers in the pool, so we can fix this by simply checking if the pool is not empty. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net: mvpp2: Enable proper PHY polling and fix port functionalityMarcin Wojtas
Currently, the network interfaces that are not configured by the bootloader (using e.g. tftp or ping) can detect the link status but are unable to transmit data. The network controller has a functionality that allows the hardware to continuously poll the PHY and directly update the MAC configuration accordingly (speed, duplex, etc.). However, this doesn't work well with phylib's software-based polling and updating MAC configuration in the driver's callback. This commit fixes this issue by: 1. Setting MVPP2_PHY_AN_STOP_SMI0_MASK in MVPP2_PHY_AN_CFG0_REG in mvpp2_init(), which disables the harware polling feature. 2. Disabling MVPP2_GMAC_PCS_ENABLE_MASK bit in MVPP2_GMAC_CTRL_2_REG in mvpp2_port_mii_set() for port types other than SGMII. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22net: mvpp2: Fix the periodic XON enable bitMarcin Wojtas
This bit was originally wrong, the correct value is BIT(1), so fix it. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/infiniband/hw/cxgb4/device.c The cxgb4 conflict was simply overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Null termination fix in dns_resolver got the pointer dereferncing wrong, fix from Ben Hutchings. 2) ip_options_compile() has a benign but real buffer overflow when parsing options. From Eric Dumazet. 3) Table updates can crash in netfilter's nftables if none of the state flags indicate an actual change, from Pablo Neira Ayuso. 4) Fix race in nf_tables dumping, also from Pablo. 5) GRE-GRO support broke the forwarding path because the segmentation state was not fully initialized in these paths, from Jerry Chu. 6) sunvnet driver leaks objects and potentially crashes on module unload, from Sowmini Varadhan. 7) We can accidently generate the same handle for several u32 classifier filters, fix from Cong Wang. 8) Several edge case bug fixes in fragment handling in xen-netback, from Zoltan Kiss. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv4: fix buffer overflow in ip_options_compile() batman-adv: fix TT VLAN inconsistency on VLAN re-add batman-adv: drop QinQ claim frames in bridge loop avoidance dns_resolver: Null-terminate the right string xen-netback: Fix pointer incrementation to avoid incorrect logging xen-netback: Fix releasing header slot on error path xen-netback: Fix releasing frag_list skbs in error path xen-netback: Fix handling frag_list on grant op error path net_sched: avoid generating same handle for u32 filters net: huawei_cdc_ncm: add "subclass 3" devices net: qmi_wwan: add two Sierra Wireless/Netgear devices wan/x25_asy: integer overflow in x25_asy_change_mtu() net: ppp: fix creating PPP pass and active filters net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's sunvnet: clean up objects created in vnet_new() on vnet_exit() r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40 net-gre-gro: Fix a bug that breaks the forwarding path netfilter: nf_tables: 64bit stats need some extra synchronization netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale netfilter: nf_tables: safe RCU iteration on list when dumping ...
2014-07-21cxgb4: Add the MC1 registers to read in the interrupt handlerHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>