aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2012-01-19igb: make local functions staticStephen Hemminger
Sparse caught two functions that were only being used in one file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() callNeerav Parikh
This patch implements support for ndo_get_fcoe_hbainfo() call in the ixgbe driver. This function will be called by the FCoE protocol stack to obtain device specific information from the underlying device configured to do FCoE. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: reset PHY after recovering from PHY power downKoki Sanagi
According to 82576_Datasheet.pdf, PHY setting is lost after PHY power down. So resetting PHY is needed when recovering from PHY power down to set a default setting to PHY register. Owing to this lack, NIC doesn't link up in some rare situation. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: add basic runtime PM supportYan, Zheng
Use the runtime power management framework to add basic runtime PM support to the igb driver. Namely, make the driver suspend the device when the link is off and set it up for generating a wakeup event after the link has been detected again. This feature is disabled by default. Based on e1000e's runtime PM code. Changes since v1: Don't suspend the device when shutting down the interface. Avoid race between runtime suspending and ethtool operations. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: Add support for byte queue limits.Eric Dumazet
This adds support for byte queue limits (BQL) Since this driver collects bytes count in 'bytecount' field, use it also in igb_tx_map() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: cleanup CE4100 MDIO registers accessFlorian Fainelli
A global variable is currently used to hold the virtual address of the CE4100 MDIO base register address. Store the address in the e1000_hw structure and update macros accordingly. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: unmap ce4100_gbe_mdio_base_virt in e1000_removeFlorian Fainelli
We are not unmapping ce4100_gbe_mdio_base_virt in exit path in case we are running on a CE4100 adapter, fix that. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: fix lockdep splat in shutdown handlerJesse Brandeburg
As reported by Steven Rostedt, e1000 has a lockdep splat added during the recent merge window. The issue is that cancel_delayed_work is called while holding our private mutex. There is no reason that I can see to hold the mutex during pci shutdown, it was more just paranoia that I put the mutex_lock around the call to e1000_down. In a quick survey lots of drivers handle locking differently when being called by the pci layer. The assumption here is that we don't need the mutexes' protection in this function because the driver could not be unloaded while in the shutdown handler which is only called at reboot or poweroff. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-02ixgbe: add support for new 82599 device.Don Skidmore
This device uses an already existing DevID but since it supports WoL we need to add the Sub DevID. It's support of WoL is limited to the first port. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02ixgbe: add support for new 82599 device idEmil Tantilov
Support for new 82599 based quad port adapter. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02ixgbe: add write flush in ixgbe_clock_out_i2c_byte()Emil Tantilov
I2C access is timing critical. Always do a write flush after writing to the I2CCTL register. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02ixgbe: fix typo'sStephen Hemminger
Saw typo in one message, so decided to run spell checker. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02ixgbe: fix incorrect PHY register readsEmil Tantilov
Fix some register reads that had the opcode and register parameters swapped. Also use define instead of a magic (0x3) number. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02igb: Add flow control advertising to ethtool setting.Carolyn Wyborny
Added pause flag for bi-directional flow control advertising to ethtool settings. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-02ixgbevf: Fix register defines to correctly handle complex expressionsAlexander Duyck
This patch is meant to address possible issues with the IXGBEVF register defines generating incorrect values when given a complex expression for the register offset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05ixgbe: Remove function prototype for non-existent functionGreg Rose
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05ixgbe: DCB: IEEE transitions may fail to reprogram hardware.John Fastabend
Transitioning through an IEEE DCBX version from a CEE DCBX and back (CEE->IEEE->CEE) may leave IEEE attributes programmed in the hardware. DCB uses a bit field in the set routines to determine which attributes PG, PFC, APP need to be reprogrammed. This is needed because user flow allows queueing a series of changes and then reprogramming the hardware with the entire set in one operation. When transitioning from IEEE DCBX mode back into CEE DCBX mode the PG and PFC bits need to be set so the possibly different CEE attributes get programmed into the device. This patch fixes broken logic that was evaluating to 0 and never setting any bits. Further this removes some checks for num_tc in set routines. This logic only worked when the number of traffic classes and user priorities were equal. This is no longer the case for X540 devices. Besides we can trust user input in this case if the device is incorrectly configured the DCB bandwidths will be incorrectly mapped but no OOPs, BUG, or hardware failure will occur. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05ixgbe: DCBnl set_all, order of operations fixJohn Fastabend
The order of operations is important in DCBnl set_all(). When FCoE is configured it uses the up2tc map to learn which queues to configure the hardware offloads on. Therefore we need to setup the map before configuring FCoE. This is only seen when the both up2tc mappings and APP info are configured simultaneously. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05igb: Update DMA Coalescing threshold calculation.Matthew Vick
This patch updates the DMA Coalescing feature parameters to account for larger MTUs. Previously, sufficient space may not have been allocated in the receive buffer, causing packet drop. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05e1000e: hitting BUG_ON() from napi_enableBruce Allan
Based on a patch from Mike McElroy created against the out-of-tree e1000e driver: Hitting the BUG_ON in napi_enable(). Code inspection shows that this can only be triggered by calling napi_enable() twice without an intervening napi_disable(). I saw the following sequence of events in the stack trace: 1) We simulated a cable pull using an Extreme switch. 2) e1000_tx_timeout() was entered. 3) e1000_reset_task() was called. Saw the message from e_err() in the console log. 4) e1000_reinit_locked was called. This function calls e1000_down() and e1000_up(). These functions call napi_disable() and napi_enable() respectively. 5) Then on another thread, a monitor task saw carrier was down and executed 'ip set link down' and 'ip set link up' commands. 6) Saw the '_E1000_RESETTING'warning fron the e1000_close function. 7) Either the e1000_open() executed between the e1000_down() and e1000_up() calls in step 4 or the e1000_open() call executed after the e1000_up() call. In either case, napi_enable() is called twice which triggers the BUG_ON. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Mike McElroy <mike.mcelroy@stratus.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05e1000e: Avoid wrong check on TX hangJeff Kirsher
Based on the original patch submitted my Michael Wang <wangyun@linux.vnet.ibm.com>. Descriptors may not be write-back while checking TX hang with flag FLAG2_DMA_BURST on. So when we detect hang, we just flush the descriptor and detect again for once. -v2 change 1 to true and 0 to false and remove extra () CC: Michael Wang <wangyun@linux.vnet.ibm.com> CC: Flavio Leitner <fbl@redhat.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-29e1000e: Support for byte queue limitsTom Herbert
Changes to e1000e to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove netdev_alloc_page and use __GFP_COLDEric Dumazet
Given we dont use anymore the struct net_device *dev argument, and this interface brings litle benefit, remove netdev_{alloc|free}_page(), to debloat include/linux/skbuff.h a bit. (Some drivers used a mix of these interfaces and alloc_pages()) When allocating a page given to device for DMA transfer (device to memory), it makes sense to use a cold one (__GFP_COLD) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a ↵Rick Jones
number of drivers Per discussion with Ben Hutchings and David Miller, go through and remove assignments of "N/A" to fw_version in various drivers' .get_drvinfo routines. While there clean-up some use of bare constants and such. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routinesRick Jones
Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALENJoe Perches
Use the normal #defines not module specific ones. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16igb: Convert bare printk to pr_noticeJoe Perches
printks should use KERN_ levels. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16igb: Convert printks to pr_<level>Jeff Kirsher
Based on original patch from Joe Perches <joe@perches.com> Use the current logging styles. pr_<level> conversions are now prefixed with "igb: " Correct a defect where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. -v2 fix-up to make checkpatch.pl compliant and remove change to the copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2011-11-16ixgbevf: Convert printks to pr_<level>Jeff Kirsher
Based on the original patch from Joe Perches <joe@perches.com> Use the current logging styles, prefix output with "ixgbevf: " Add #define pr_fmt Coalesce formats. -v2 Fix-up to make checkpatch.pl compliant and remove change to copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Sibai Li <sibai.li@intel.com>
2011-11-16igbvf: Convert printks to pr_<level>Jeff Kirsher
Based on the previous patch from Joe Perches <joe@perches.com> Use current logging styles. Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Neaten link status dev_info. -v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl compliant. CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Sibai Li <sibai.li@intel.com>
2011-11-16ixgbe: fix LED blink logic to check for linkEmil Tantilov
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16e1000e: Convert printks to pr_<level>Jeff Kirsher
Based on the original patch from Joe Perches. Use the current logging styles. pr_<level> conversions are now prefixed with "e1000e:" Correct a couple of defects where the trailing NTU may have been printed on a separate line because of an interleaving hex_dump. Remove unnecessary uses of KERN_CONT and use single pr_info()s to avoid any possible output interleaving from other modules. Coalesce formats as appropriate. Remove an extra space from a broken across lines coalescing of "Link Status " and " Change". -v2 Remove changes to Copyright string CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2011-11-16e1000e: convert to real ndo_set_rx_modeJesse Brandeburg
Commit afc4b13d (net: remove use of ndo_set_multicast_list in drivers) changed e1000e to use the ndo_set_rx_mode entry point, but didn't implement the unicast address programming functionality. Implement it to achieve the ability to add unicast addresses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-14Sweep the last of the active .get_drvinfo floors under ethernet/Rick Jones
This round of floor sweeping converts strncpy calls in various .get_drvinfo routines to the preferred strlcpy. It also does a modicum of other cleaning in those routines. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Sweep additional floors of strcpy in .get_drvinfo routinesRick Jones
Perform another round of floor sweeping, converting the .get_drvinfo routines of additional drivers from strcpy to strlcpy along with some conversion of sprintf to snprintf. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04i825xx:xscale:8390:freescale: Fix Kconfig dependanciesJeff Kirsher
i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so NET_VENDOR_INTEL should contain ALL the dependencies of the "sub" Kconfigs. Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so NET_VENDOR_NATSEMI needs to contains ALL the dependencies. Freescale Kconfig only had fs_enet as a sub Kconfig, and already contained the needed dependencies, just cleaned up the dependencies. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-02ixgbevf: Update release versionGreg Rose
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: DCB, return max for IEEE traffic classesJohn Fastabend
Returning the max traffic classes on get requests simplifies user space configurations because applications will know explicitly how many traffic classes can be used. Typical switch implementations use 2 or 3 traffic classes so this not seen often today. And user space can learn the number of traffic classes by return codes but this allows user space to configure ixgbe correctly at the start. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix reading of the buffer returned by the firmwareEmil Tantilov
This patch fixes some issues found in the buffer read portion of ixgbe_host_interface_command() - use `bi` as the buffer index counter instead of `i` - add conversion to native cpu byte ordering on register read - fix conversion from bytes to dword - use dword_len instead of buf_len when reading the register Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: Fix compiler warningsGreg Rose
Wrap SR-IOV specific functions in CONFIG_PCI_IOV to avoid compiler warnings. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix smatch splat due to missing NULL checkJohn Fastabend
ixgbe_ieee_ets and ixgbe_ieee_pfc are intialized at the same time. Do a check for both before configuring IEEE802.1Qaz. Also max_frame was causing a sparse warning resolved here as well. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix disabling of Tx laser at probeEmil Tantilov
register_netdev() calls ndo_set_features() which may result in HW reset which in turn will bring the laser back up. This patch moves ixgbe_laser_tx_disable() below register_netdev() in ixgbe_probe() to make sure laser is shut off on load. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: Fix link issues caused by a reset while interface is downEmil Tantilov
Interface fails to obtain link on 82599 SFP in the following scenario: 1. Set advertised speed to GB: ethtool -s eth0 advertise 0x20 2. Bring interface down ip link set eth0 down 3. Issue any command that leads to a reset: ethtool -t eth0 4. Bring link back up: ip link set eth0 up Following patch makes sure that the driver flaps the Tx laser every time ixgbe_start_hw() is called, and not only when the speed is set. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-25 15:46:42 +0000