aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbevf
AgeCommit message (Collapse)Author
2015-10-23ixgbe, ixgbevf: Add new mbox API xcast modeHiroshi Shimamoto
The limitation of the number of multicast address for VF is not enough for the large scale server with SR-IOV feature. IPv6 requires the multicast MAC address for each IP address to handle the Neighbor Solicitation message. We couldn't assign over 30 IPv6 addresses to a single VF. This patch introduces the new mailbox API, IXGBE_VF_UPDATE_XCAST_MODE, to update multicast mode of VF. This adds 3 modes; - NONE only L2 exact match addresses or Flow Director enabled - MULTI BAM and ROMPE set - ALLMULTI BAM, ROMPE and MPE set If a guest VF user wants over 30 MAC multicast addresses, set IFF_ALLMULTI to request PF to update xcast mode to enable VF multicast promiscuous mode. On the other hand, enabling VF multicast promiscuous mode may affect security and performance in the network of the NIC. Only trusted VF can enable multicast promiscuous mode. The behavior of untrusted VF is the same as previous version. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16drivers/net/intel: use napi_complete_done()Jesse Brandeburg
As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-22ixgbevf: Enables TSO for stacked VLANToshiaki Makita
Setting ndo_features_check to passthru_features_check allows the driver to skip the check for multiple tagged TSO packets and enables stacked VLAN TSO. Tested with 82599ES. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-08-21mm: make page pfmemalloc check more robustMichal Hocko
Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [akpm@linux-foundation.org: fix blooper in slub] Fixes: c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") Signed-off-by: Michal Hocko <mhocko@suse.com> Debugged-by: Vlastimil Babka <vbabka@suse.com> Debugged-by: Jiri Bohac <jbohac@suse.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Acked-by: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-23ixgbevf: add support for reporting RSS key and hash table for X550Emil Tantilov
This patch extends the reporting of the RSS key and hash table by adding support for X550 VFs. The difference is that X550 VFs have their own registers for RSS key and indirection table, so there is no need to query the PF. The RSS key and indirection table are stored in the adapter structure during the configuration of VFRSSRK and VFRETA which in turn can be used in ethtool for reporting. The logic for writing VFRETA is also changed to make sure that the indirection table is reported correctly. In addition this patch adds defines for the VFRETA entries and number of VFRSSRK registers as well as some whitespace cleanups. Reported-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17ixgbevf: Set Rx hash type for ingress packetsFan Du
Set hash type for ingress packets according to NIC advanced receive descriptors RSS type part. Signed-off-by: Fan Du <fan.du@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-17ixgbevf: fold ixgbevf_pull_tail into ixgbevf_add_rx_fragAlexander Duyck
This change folds the ixgbevf_pull_tail call into ixgbevf_add_rx_frag. The advantage to doing this is that the fragment doesn't have to be modified after it is added to the skb. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-04ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skbAlexander Duyck
With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-11ixgbevf: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options for VF devices. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add RSS Key query codeVlad Zolotarov
Add the ixgbevf_get_rss_key() function that queries the PF for an RSS Random Key using a new VF-PF channel IXGBE_VF_GET_RSS_KEY command. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add a RETA query codeVlad Zolotarov
We will currently support only 82599 and x540 devices. Support for other devices will be added later. - Added a new API version support. - Added the query implementation in the ixgbevf. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbevf: Use ether_addr_copy() instead of memcpy()Jeff Kirsher
Use the macro to copy the Ethernet address instead of memcpy(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2015-03-13ixgbevf: Fix code comments and whitespaceJeff Kirsher
Fix the code comments to align with drivers/net/ code commenting style, as well as whitespace issues. The whitespace issues resolve checkpatch errors, like lines exceeding 80 chars (except for strings) and the use of tabs where possible. CC: <kernel-team@fb.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05ixgbevf: combine all of the tasks into a single service taskEmil Tantilov
This change combines the reset and watchdog tasklets into a single task. The advantage of this is that we can avoid multiple schedules of the reset task when we have a reset event needed due to either the mailbox going down or transmit packets being present on a link down. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: rewrite watchdog task to function similar to igbvfEmil Tantilov
This patch cleans up the logic dealing with link down/up by breaking down the link detection and up/down events into separate functions - similar to how these events are handled in other drivers. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: Add code to check for Tx hangEmil Tantilov
This patch adds code to allow for Tx hang checking. The idea is to provide more robust debug info in the event of a transmit unit hang. Similar to the logic in ixgbe. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: Fix ordering of shutdown to correctly disable Rx and TxEmil Tantilov
This patch updates the ordering of the shutdown path so that we attempt to shutdown the rings more gracefully. Basically the big changes are that we shutdown the main Rx filter in the case of Rx and we set the carrier_off state in the case of Tx so that packets stop being delivered from outside the driver. Then we shut down interrupts and NAPI. Finally we stop the rings from performing DMA and clean them. This is a bit more graceful than the previous path. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: set vlan_features in a single write instead of several ORsEmil Tantilov
Clean up the setting of vlan_features by enabling all features at once. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: add RSS support for X550Emil Tantilov
X550 provides RSS registers for configuring RSS per VF. This patch introduces ixgbevf_setup_vfmrqc() which uses the VFRETA, VFRSSRK and VFMRQC registers to configure RSS on X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbevf: enable multiple queue supportEmil Tantilov
This patch enables multiple queues and RSS support for the VF. Maximum of 2 queues are supported due to available vectors. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30ixgbevf: Fix checksum error when using stacked vlanToshiaki Makita
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08ethernet/intel: Use eth_skb_pad and skb_put_padto helpersAlexander Duyck
Update the Intel Ethernet drivers to use eth_skb_pad() and skb_put_padto instead of doing their own implementations of the function. Also this cleans up two other spots where skb_pad was called but the length and tail pointers were being manipulated directly instead of just having the padding length added via __skb_put. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-05ixgbevf: fix possible crashes in probe and removeEmil Tantilov
This patch resolves couple of issues in ixgbevf_probe/remove(): 1. Fix a case where adapter->state is tested after free_netdev() this is same as the patch for ixgbe from Daniel Borkmann <dborkman@redhat.com>: commit b5b2ffc0574e1f27 ("ixgbe: fix use after free adapter->state test in ixgbe_remove/ixgbe_probe") 2. Move pci_set_drvdata() after all the error checks in ixgbevf_probe() and then add a check in ixgbevf_probe() to avoid running the cleanup functions twice in cases where probe failed. CC: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbevf: add support for X550 VFsEmil Tantilov
This patch adds initial support for VFs on a new mac - X550. The patch adds the basic structures and device IDs for the X550 VFs that would allow the driver to load and pass traffic. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: add netpoll supportEmil Tantilov
This patch adds ixgbevf_netpoll() a callback for .ndo_poll_controller to allow for the VF interface to be used with netconsole. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: compare total_rx_packets and budget in ixgbevf_clean_rx_irqEmil Tantilov
total_rx_packets is the number of packets we had cleaned, and budget is the total number of packets that we could clean per poll. Instead of altering both of these values we can save ourselves one write to memory by just comparing total_rx_packets to the budget and as long as we are less than budget we continue cleaning. Also change the do{}while logic to while{} in order to avoid processing packets when budget is 0. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Change receive model to use double buffered page based receivesEmil Tantilov
This patch changes the basic receive path for ixgbevf so that instead of receiving the data into an skb it is received into a double buffered page. The main change is that the receives will be done in pages only and then pull the header out of the page and copy it into the sk_buff data. This has the advantages of reduced cache misses and improved performance on IOMMU enabled systems. v2: - added pfmemalloc check to a new function for reusable page - moved atomic_inc outside of #if/else in ixgbevf_add_rx_frag() - reverted the removal of the api check in ixgbevf_change_mtu() CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Update Rx next to clean in real timeEmil Tantilov
Since the next_to_clean value is only accessed by the Rx interrupt handler we can save on stack space by just storing our updated values back in next_to_clean instead of using the stack variable i. This should help to reduce stack space and we can further collapse the size of the function. Also removed non_eop_descs counter as it was never shown in the stats. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: reorder main loop in ixgbe_clean_rx_irq to allow for do/while/continueEmil Tantilov
This change allows us to go from a loop based on the descriptor to one primarily based on the budget. The advantage to this is that we can avoid carrying too many values from one iteration to the next. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Cleanup variable usage, improve stack performanceEmil Tantilov
This change is meant to help cleanup the usage of temporary variables within the Rx hot-path by removing unnecessary variables and reducing the scope of variables that do not need to exist outside the main loop. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Combine the logic for post Rx processing into single functionEmil Tantilov
This patch cleans up ixgbevf_clean_rx_irq() by merging several similar operations into a new function - ixgbevf_process_skb_fields(). CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Test Rx status bits directly out of the descriptorEmil Tantilov
Instead of keeping a local copy of the status bits from the descriptor we can just read them directly - this is accomplished with the addition of ixgbevf_test_staterr(). In addition instead of doing a byteswap on the status bits value, we can byteswap the constant values we are testing since that can be done at compile time which should help to improve performance on big-endian systems. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-20ixgbevf: Update ixgbevf_alloc_rx_buffers to handle clearing of status bitsEmil Tantilov
Instead of clearing the status bits in the cleanup it makes more sense to just clear the status bits on allocation. This way we can leave the Rx descriptor rings as a read only memory block until we actually have buffers to give back to the hardware. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbevf: remove useless bd_number from struct ixgbevf_adapterEthan Zhao
It is useless and buggy, just remove it. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-12ixgbevf: Resolve missing-field-initializers warningsMark Rustad
Resolve missing-field-initializers warnings by using designated initialization. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04ixgbevf: introduce delay for checking VFLINKS on 82599Emil Tantilov
VFLINKS.LINKUP bit tends to flap when a DA or SFP+ cable is disconnected. It can take up to 500 usecs for the LINKUP bit to be correct. This patch resolves the issue by introducing a delay for 82599 VFs of at least 500 usecs to make sure the VFLINKS value is correct. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-25ixgbevf: Remove unused get_supported_physical_layer pointerMark Rustad
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23ixgbevf: remove 82599 from the module descriptionEmil Tantilov
This patch removes 82599 from the description of the ixgbevf module since the VF driver is supported on other parts as well. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-11ixgbevf: remove open-coded skb_cow_headFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11ixgbevf: Add bit to mark work queue initializationMark Rustad
An indication of work queue initialization is needed. This is because register accesses prior to that time can detect a removal and attempt to schedule the watchdog task. Adding the __IXGBEVF_WORK_INIT bit allows this to be checked and if not set prevent the watchdog task scheduling. By checking for a removal right after initialization, the probe can be failed at that point without getting the watchdog task involved. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31ixgbevf: Fix rcu warnings induced by LERMark Rustad
Resolve some rcu warnings produced when LER actions take place. This appears to be due to not holding the rtnl lock when calling ixgbe_down, so hold the lock. Also avoid disabling the device when it is already disabled. This check is necessary because the callback can be called more than once in some cases. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>