aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbevf
AgeCommit message (Collapse)Author
2014-07-25ixgbevf: Remove unused get_supported_physical_layer pointerMark Rustad
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23ixgbevf: remove 82599 from the module descriptionEmil Tantilov
This patch removes 82599 from the description of the ixgbevf module since the VF driver is supported on other parts as well. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-11ixgbevf: remove open-coded skb_cow_headFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11ixgbevf: Add bit to mark work queue initializationMark Rustad
An indication of work queue initialization is needed. This is because register accesses prior to that time can detect a removal and attempt to schedule the watchdog task. Adding the __IXGBEVF_WORK_INIT bit allows this to be checked and if not set prevent the watchdog task scheduling. By checking for a removal right after initialization, the probe can be failed at that point without getting the watchdog task involved. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31ixgbevf: Fix rcu warnings induced by LERMark Rustad
Resolve some rcu warnings produced when LER actions take place. This appears to be due to not holding the rtnl lock when calling ixgbe_down, so hold the lock. Also avoid disabling the device when it is already disabled. This check is necessary because the callback can be called more than once in some cases. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31ixgbevf: Change ixgbe_read_reg to ixgbevf_read_regMark Rustad
Change the ixgbe_read_reg function name to ixgbevf_read_reg to avoid a namespace clash with the ixgbe driver. This will allow ixgbe to take its register read function out-of-line to reduce memory footprint. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Additional adapter removal checksMark Rustad
Additional checks are needed for a detected removal not to cause problems. Some involve simply avoiding a lot of stuff that can't do anything good, and also cases where the phony return value can cause problems. In addition, down the adapter when the removal is sensed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Check for adapter removal on register writesMark Rustad
Prevent writes to an adapter that has been detected as removed by a previous failing read. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Check register reads for adapter removalMark Rustad
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Since this patch adds so much to ixgbe_read_reg, stop inlining it, to reduce driver bloat. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Make the ethtool register test use accessorsMark Rustad
Make the ethtool register test use the normal register accessor functions. Also eliminate macros used for calling register test functions to make error exits clearer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Use static inlines instead of macrosMark Rustad
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbevf: Convert uses of __constant_<foo> to <foo>Joe Perches
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbevf: Protect ixgbevf_down with __IXGBEVF_DOWN bitMark Rustad
The ixgbevf_down function can now prevent multiple executions by doing test_and_set_bit on __IXGBEVF_DOWN. This did not work before introduction of the __IXGBEVF_REMOVING bit, because of overloading of __IXGBEVF_DOWN. Also add smp_mb__before_clear_bit call before clearing the __IXGBEVF_DOWN bit. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbevf: Indicate removal state explicitlyMark Rustad
Add a bit, __IXGBEVF_REMOVING, to indicate that the module is being removed. The __IXGBEVF_DOWN bit had been overloaded for this purpose, but that leads to trouble. A few places now check both __IXGBEVF_DOWN and __IXGBEVF_REMOVING. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12ixgbevf: delete unneeded call to pci_set_power_stateJulia Lawall
This driver does not need to adjust the power state on suspend, so the call to pci_set_power_state in the resume function is a no-op. Drop it, to make the code more understandable. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-08ixgbevf: fix skb->pkt_type checksFlorian Fainelli
skb->pkt_type is not a bitmask, but contains only value at a time from the range defined in include/uapi/linux/if_packet.h. Checking it like if it was a bitmask of values would also cause PACKET_OTHERHOST, PACKET_LOOPBACK and PACKET_FASTROUTE to be matched by this check since their lower 2 bits are also set, although that does not fix a real bug, it is still potentially confusing. This bogus check was introduced in commit 815cccbf ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf"). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-28ixgbevf: add check for CHECKSUM_PARTIAL when doing TSOEmil Tantilov
This patch adds check for CHECKSUM_PARTIAL to avoid the skb_is_gso check in ixgbevf_tso(). It should reduce overhead for workloads that are not using TSO or checksum offloads. It is the same as in ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbevf: fix handling of tx checksummingEmil Tantilov
This patch resolves an issue introduced by: commit 7ad1a093519e37fb673579819bf6af122641c397 ixgbevf: make the first tx_buffer a repository for most of the skb info Incorrect check for the result of ixgbevf_tso() can lead to calling ixgbevf_tx_csum() which can spawn 2 context descriptors and result in performance degradation and/or corrupted packets. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18ixgbevf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: merge ixgbevf_tx_map and ixgbevf_tx_queue into a single functionEmil Tantilov
This change merges the ixgbevf_tx_map call and the ixgbevf_tx_queue call into a single function. In order to make room for this setting of cmd_type and olinfo flags is done in separate functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: redo dma mapping using the tx buffer infoEmil Tantilov
This patch takes advantage of the dma buffer always being present in the first descriptor and mapped as single. As such we can call dma_unmap_single and don't need to check for DMA mapping in ixgbevf_clean_tx_irq(). In addition this patch makes use of the DMA API. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: make the first tx_buffer a repository for most of the skb infoEmil Tantilov
This change makes it so that the first tx_buffer structure acts as a central storage location for most of the info about the skb we are about to transmit. In addition this patch makes tx_flags part of the ixgbevf_tx_buffer struct. This allows us to use the flags directly from the stucture and as result removes the tx_flags parameter from some functions. Also as a cleanup mapped_as_page is folded into tx_flags and some unused flags were removed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: add tx countersEmil Tantilov
This patch adds counters for tx_restart_queue and tx_timeout_count. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: remove counters for Tx/Rx checksum offloadEmil Tantilov
This patch removes the Tx/Rx counters for checksum offload. The Tx counter was never updated and the Rx counter is of limited use. This is in effort to clean up the counters and make them consistent with the counters shown by ixgbe. Also this patch removes some members of the adapter structure that were never used and shuffles others to reduce number of holes. before: /* size: 1568, cachelines: 25, members: 48 */ /* sum members: 1519, holes: 10, sum holes: 43 */ /* padding: 6 */ /* last cacheline: 32 bytes */ after: /* size: 1480, cachelines: 24, members: 43 */ /* sum members: 1479, holes: 1, sum holes: 1 */ /* last cacheline: 8 bytes */ Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: move ring specific stats into ring specific structureEmil Tantilov
This patch moves hot-path specific statistics into the ring structure. This allows us to drop the adapter structure in some functions and should help with performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: make use of the dev pointer in the ixgbevf_ring structEmil Tantilov
This patch cleans up the code by removing the adapter structure as parameter from multiple functions. The adapter structure was previously being used to access the dev pointer, but this can also be done via the ixgbevf_ring structure. This way we can drop the adapter as parameter from these functions. This patch also includes small cleanups in some error code paths. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: bump versionDon Skidmore
Bump the version number to better match functionality provided with out of tree driver of the same version. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbevf: create function for all of ring initDon Skidmore
This patch creates new functions for ring initialization, ixgbevf_configure_tx_ring() and ixgbevf_configure_rx_ring(). The work done in these function previously was spread between several other functions and this change should hopefully lead to greater readability and make the code more like ixgbe. This patch also moves the placement of some older functions to avoid having to write prototypes. It also promotes a couple of debug messages to errors. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbevf: Convert ring storage form pointer to an array to array of pointersDon Skidmore
This will change how we store rings arrays in the adapter sturct. We use to have a pointer to an array now we will be using an array of pointers. This will allow us to support multiple queues on muliple nodes at some point we would be able to reallocate the rings so that each is on a local node if needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbevf: use pci drvdata correctly in ixgbevf_suspend()Wei Yongjun
We had set the pci driver-specific data in ixgbevf_probe() as a type of struct net_device, so we should use it as netdev in ixgbevf_suspend(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbevf: set the disable state when ixgbevf_qv_disable is calledJacob Keller
The ixgbevf_qv_disable function used by CONFIG_NET_RX_BUSY_POLL is broken, because it does not properly set the IXGBEVF_QV_STATE_DISABLED bit, indicating that the q_vector should be disabled (and preventing future locks from obtaining the vector). This patch corrects the issue by setting the disable state. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17ixgbevf: add DCB configuration into queue setupDon Skidmore
This patch takes the DCB config checks and adds them to the normal setting up of the queues. This way we won't have to allocation queues in a separate place for enabling DCB. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10ixgbe: Focus config of head, tail ntc, and ntu all into a single functionDon Skidmore
This patch makes it so that head, tail, next to clean, and next to use are all reset in a single function for the Tx or Rx path. Previously the code for this was spread out over several areas which could make it difficult to track what the values for these were. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-01ixgbe: cleanup IXGBE_DESC_UNUSEDDon Skidmore
This patch just replaces the IXGBE_DESC_UNUSED macro with a like named inline function ixgbevf_desc_unused. The inline function makes the logic a bit more readable. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-01ixgbevf: remove redundant workaroundEmil Tantilov
This patch removes a workaround related to header split, which is redundant because the driver does not support splitting packet headers on Rx. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: Add zero_base handler to network statisticsDon Skidmore
This patch removes the need to keep a zero_base variable in the adapter structure. Now we just use two different macros to set the non-zero and zero base. This adds to readability and shortens some of the structure initialization under 80 columns. The gathering of status for ethtool was slightly modified to again better fit into 80 columns and become a bit more readable. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: add BP_EXTENDED_STATS for CONFIG_NET_RX_BUSY_POLLJacob Keller
This patch adds the extended statistics similar to the ixgbe driver. These statistics keep track of how often the busy polling yields, as well as how many packets are cleaned or missed by the polling routine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: implement CONFIG_NET_RX_BUSY_POLLJacob Keller
This patch enables CONFIG_NET_RX_BUSY_POLL support in the VF code. This enables sockets which have enabled the SO_BUSY_POLL socket option to use the ndo_busy_poll_recv operation which could result in lower latency, at the cost of higher CPU utilization, and increased power usage. This support is similar to how the ixgbe driver works. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: have clean_rx_irq return total_rx_packets cleanedJacob Keller
Rather than return true/false indicating whether there was budget left, return the total packets cleaned. This currently has no use, but will be used in a following patch which enables CONFIG_NET_RX_BUSY_POLL support in order to track how many packets were cleaned during the busy poll as part of the extended statistics. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: add ixgbevf_rx_skbJacob Keller
This patch adds ixgbevf_rx_skb in line with how ixgbe handles the variations on how packets can be received. It will be extended in a following patch for CONFIG_NET_RX_BUSY_POLL support. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-24ixgbevf: bump driver versionDon Skidmore
Bump patch to reflect what version of the out of tree driver it has equivalent functionality with (2.11.3). Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-24ixgbevf: implement ethtool get/set coalesceJacob Keller
This patch adds support for ethtool's get_coalesce and set_coalesce command for the ixgbevf driver. This enables dynamically updating the minimum time between interrupts. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-24ixgbevf: Adds function to set PSRTYPE registerDon Skidmore
This patch creates a new function to set PSRTYPE. This function helps lay the ground work for eventual multi queue support. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>