aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mv88e6123_61_65.c
AgeCommit message (Collapse)Author
2015-11-02net: dsa: mv88e6xxx: lookup switch nameVivien Didelot
All the mv88e6xxx drivers use the exact same code in their probe function to lookup the switch name given its ID. Thus introduce a mv88e6xxx_switch_id structure and a mv88e6xxx_lookup_name function in the common mv88e6xxx code. In the meantime make __mv88e6xxx_reg_{read,write} static since we do not need to expose these low-level r/w routines anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: mv88e6xxx: remove link pollingRussell King
The link status is polled by the generic phy layer, there's no need to duplicate that polling with additional polling. This additional polling adds additional MDIO traffic, and races with the generic phy layer, resulting in missing or duplicated link status messages. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31dsa: mv88e6xxx: Allow speed/duplex of port to be configuredAndrew Lunn
The current code sets user ports to perform auto negotiation using the phy. CPU and DSA ports are configured to full duplex and maximum speed the switch supports. There are however use cases where the CPU has a slower port, and when user ports have SFP modules with fixed speed. In these cases, port settings to be read from a fixed_phy devices. The switch driver then needs to implement the adjust_link op, so the port settings can be set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: Converting remaining registers to mnemonicsAndrew Lunn
Use defines for registers, shifts and bits in the remaining register accesses in the individual drivers, in order to aid readability. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: Centralize setting up portsAndrew Lunn
Now that setting up a port is identical for all switches, centralisers the code looping over all the ports to set them up. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: Centralise global and port setup code into mv88e6xxx.Andrew Lunn
The port setup code in the individual drivers is identical for 6123, 6171, and 6352, and very similar in 6131. Move it all into mv88e6xxx, using the chip families to differentiate on features. Similarly, the global setup is also very similar. Move the majority into mv8e6xxx. The chips themselves fall into families. Add helpers which uses the device IDs to determine if a device is a member of a family or not. Add some additional device IDs to the existing list, to make these helper functions more complete. However these IDs are not yet added to the probe functions. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Use mnemonics rather than register numbersAndrew Lunn
Rather than refer to registers by number, define mnemonics. Also define mnemonics for the commonly used bits within the registers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Consolidate getting the statisticsAndrew Lunn
Reading the statistics from the hardware is the same for all chips. What differs is the number of available statistics. Have just one copy of the code in the shared mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Consolidate phy read and write functionsAndrew Lunn
Move the common code for reading and writing phy registers into the shared mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Centralize Marvell switch resetAndrew Lunn
Marvell switches are all reset in nearly the same way. The only difference is if the PPU should be enabled or not. Move this code into the shared mv88x6xxx.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: mv88e6123_61_65: Determine and use number of switch portsGuenter Roeck
Determine and use number of switch ports from chip ID instead of always using the maximum, and return error when an attempt is made to access a non-existing port. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6123_61_65: Use common port configurationGuenter Roeck
This will simplify adding offloaded bridge support later on. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Factor out common initialization codeGuenter Roeck
Code used and needed in mv886xxx.c should be initialized there as well, so factor it out from the individual initialization files. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16net: dsa: Centralise code for reading the temperature sensorAndrew Lunn
The method to read the temperature used in the mve6123_61_65 driver can also be used for other chips. Move the code into the shared code base of mv88e6xxx.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Provide additional RMON statisticsGuenter Roeck
Display sw_in_discards, sw_in_filtered, and sw_out_filtered for chips supported by mv88e6123_61_65 and mv88e6352 drivers. The variables are provided in port registers, not the normal status registers. Mark by adding 0x100 to the register offset and add special handling code to mv88e6xxx_get_ethtool_stats. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6123_61_65: Add support for reading switch registersGuenter Roeck
The infrastructure can now report switch registers to ethtool. Add support for it to the mv88e6123_61_65 driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6123_61_65: Report chip temperatureGuenter Roeck
MV88E6123 and compatible chips support reading the chip temperature from PHY register 6:26. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Replace mii_bus with a generic host deviceAlexander Duyck
This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: dsa: change tag_protocol to an enumFlorian Fainelli
Now that we introduced an additional multiplexing/demultiplexing layer with commit 3e8a72d1dae37 ("net: dsa: reduce number of protocol hooks") that lives within the DSA code, we no longer need to have a given switch driver tag_protocol be an actual ethertype value, instead, we can replace it with an enum: dsa_tag_protocol. Do this replacement in the drivers, which allows us to get rid of the cpu_to_be16()/htons() dance, and remove ETH_P_BRCMTAG since we do not need it anymore. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: dsa: update DSA drivers to use ds_to_privFlorian Fainelli
Use the helper function to retrieve the driver private context instead of using (void *)(ds + 1). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert repeated msleep calls to timeoutsBarry Grussling
Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert DSA comments to network-style commentsBarry Grussling
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24drivers/net: dsa/mv88e6xxx.c files need linux/module.hPaul Gortmaker
An implicit instance of module.h leaked back into existence and was masking the fact that these drivers weren't calling out the include for itself. Fix the drivers before we remove the implicit include path via net/netprio_cgroup.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 ↵Chris Healy
switches. Add reporting of silicon revision during the probe function for Marvell 88E6123/88E6161/88E6165 switches. Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>