aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2009-12-11Input: i8042 - allow installing platform filters for incoming dataMatthew Garrett
Some hardware (such as Dell laptops) signal a variety of events through the i8042 controller, even if these don't map to keyboard events. Add support for drivers to filter the i8042 event stream in order to respond to these events and (if appropriate) block them from entering the input stream. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: i8042 - fix locking in interrupt routineDmitry Torokhov
We need to protect not only i8042 status and data register from concurrent access from IRQ 1 and 12 but the rest of the shared state as well, so let's move release of i8042_lock in i8042_interrupt() a little bit further down. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpadDmitry Torokhov
Relative events are only reported via secondary device therefore device associated with the touchpad should not advertise these capabilities. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: document use of input_event() functionDmitry Torokhov
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: sa1111ps2 - annotate probe() and remove() methodsDmitry Torokhov
Also fix annotation of ps2_test() - it can'be __init since it is called from __devinit code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: ambakmi - annotate probe() and remove() methodsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: gscps2 - fix probe() and remove() annotationsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: altera_ps2 - add annotations to probe and remove methodsDmitry Torokhov
Mark altera_ps2_probe() as __devinit and altera_ps2_remove() as __devexit so that they can be discarded when not needed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: hil-mlc - use del_timer_sync() when unloading the driverDmitry Torokhov
del_timer() does not wait for the timer to finish running before returning and therefore is technically not safe. Also make sure to enable tasklet before kicking timer that will schedule it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Input: serio - set owner in driver structuresDmitry Torokhov
Setting up owner field ensures that driver core creates symlink from the driver to a module implementing this driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-11Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits) PCI: fix coding style issue in pci_save_state() PCI: add pci_request_acs PCI: fix BUG_ON triggered by logical PCIe root port removal PCI: remove ifdefed pci_cleanup_aer_correct_error_status PCI: unconditionally clear AER uncorr status register during cleanup x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource PCI: portdrv: remove redundant definitions PCI: portdrv: remove unnecessary struct pcie_port_data PCI: portdrv: minor cleanup for pcie_port_device_register PCI: portdrv: add missing irq cleanup PCI: portdrv: enable device before irq initialization PCI: portdrv: cleanup service irqs initialization PCI: portdrv: check capabilities first PCI: portdrv: move PME capability check PCI: portdrv: remove redundant pcie type calculation PCI: portdrv: cleanup pcie_device registration PCI: portdrv: remove redundant pcie_port_device_probe PCI: Always set prefetchable base/limit upper32 registers PCI: read-modify-write the pcie device control register when initiating pcie flr PCI: show dma_mask bits in /sys ... Fixed up conflicts in: arch/x86/kernel/amd_iommu_init.c drivers/pci/dmar.c drivers/pci/hotplug/acpiphp_glue.c
2009-12-10Merge branch 'xen/fbdev' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag. Fix toogle whether xenbus driver should be built as module or part of kernel.
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits) sh: include empty zero page in romImage sh: Make associative cache writes fatal on all SH-4A parts. sh: Drop associative writes for SH-4 cache flushes. sh: Partial revert of copy/clear_user_highpage() optimizations. sh: Add default uImage rule for se7724, ap325rxa, and migor. sh: allow runtime pm without suspend/resume callbacks sh: mach-ecovec24: Remove un-defined settings for VPU sh: mach-ecovec24: LCDC drive ability become high sh: fix sh7724 VEU3F resource size serial: sh-sci: Fix too early port disabling. sh: pfc: pr_info() -> pr_debug() cleanups. sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines. sh: Improve kfr2r09 serial port setup code sh: Break out SuperH PFC code sh: Move KEYSC header file sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file sh: Add CPG save/restore code for sh7724 R-standby sh: Add SDHI power control support to Ecovec mfd: Add power control platform data to SDHI driver sh: mach-ecovec24: modify address map ...
2009-12-09Merge branch 'bkl-drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'bkl-drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: agp: Remove the BKL from agp_open inifiband: Remove BKL from ipath_open() mips: Remove BKL from tb0219 drivers: Remove BKL from scx200_gpio drivers: Remove BKL from pc8736x_gpio parisc: Remove BKL from eisa_eeprom rtc: Remove BKL from efirtc input: Remove BKL from hp_sdc_rtc hw_random: Remove BKL from core macintosh: Remove BKL from ans-lcd nvram: Drop the bkl from non-generic nvram_llseek() nvram: Drop the bkl from nvram_llseek() mem_class: Drop the bkl from memory_open() spi: Remove BKL from spidev_open drivers: Remove BKL from cs5535_gpio drivers: Remove BKL from misc_open
2009-12-08Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits) arm: omap: Add omap3_defconfig AM35xx: Defconfig for AM3517 EVM board AM35xx: Add support for AM3517 EVM board omap: 3630sdp: defconfig creation omap: 3630sdp: introduce 3630 sdp board support omap3: Add defconfig for IGEP v2 board omap3: Add minimal IGEP v2 support omap3: Add CompuLab CM-T35 defconfig omap3: Add CompuLab CM-T35 board support omap3: rx51: Add wl1251 wlan driver support omap3: rx51: Add SDRAM init omap1: Add default kernel configuration for Herald omap1: Add board support and LCD for HTC Herald omap: zoom2: update defconfig for LL_DEBUG_NONE omap: zoom3: defconfig creation omap3: zoom: Introduce zoom3 board support omap3: zoom: Drop i2c-1 speed to 2400 omap3: zoom: rename zoom2 name to generic zoom omap3: zoom: split board file for software reuse omap3evm: MIgrate to smsc911x ethernet driver ... Fix trivial conflict (two unrelated config options added next to each other) in arch/arm/mach-omap2/Makefile
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-07Input: dm355evm_kbd - switch to using sparse keymap libraryDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-07Input: wistron_btns - switch to using sparse keymap libraryDmitry Torokhov
The keymap manipulation code was split into a library module, so let's make us of it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-07Input: add generic support for sparse keymapsDmitry Torokhov
More and more devices choose to reimplement support for sparse keymaps first introduced by wistron driver. Move it into a library module so it can be easily used by interested parties. Reviewed-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04Input: fix memory leak in force feedback coreJari Vanhala
Effects were allocated, but not freed anywhere. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04Input: wistron - remove identification strings from DMI tableDmitry Torokhov
The driver does not reference identification strings in DMI table and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04Input: psmouse - remove identification strings from DMI tablesDmitry Torokhov
The driver does not reference identification strings in DMI tables and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04Input: atkbd - remove identification strings from DMI tableDmitry Torokhov
The driver does not reference identification strings in DMI table and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04Input: i8042 - remove identification strings from DMI tablesDmitry Torokhov
The driver does not reference identification strings in DMI tables and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-03Input: psmouse - do not carry DMI data aroundDmitry Torokhov
DMI tables use considerable amount of memory. Mark them as __initconst so they will be discarded once module is loaded. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-03Input: matrix-keypad - switch to using dev_pm_opsDmitry Torokhov
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-02Merge commit 'v2.6.32' into nextDmitry Torokhov
2009-12-02Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset listAnisse Astier
These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01Input: keyboard - fix lack of locking when traversing handler->h_listDmitry Torokhov
Keyboard handler should not attempt to traverse handler->h_list on its own, without any locking, otherwise it races with registering and unregistering of input handles which leads to crashes. Introduce input_handler_for_each_handle() helper that allows safely iterate over all handles attached to a particular handler and switch keyboard handler to use it. Reported-by: Jim Paradis <jparadis@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-30Input: gpio_keys - scan gpio state at probe and resume timeDaniel Mack
We need to read and report gpio state when we bind the driver to the device and upon resume so that userspace has correct state of the switches (and keys but they are less important since, even if they are happened to be pressed, we'd expect them to be released fairly soon). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-29Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controllerPetr Štetiar
This patch adds support for the ET&T TC5UH 5-wire USB touchscreen controller. More info at http://www.etandt.com.tw/board_solution.html Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-29Input: xpad - add two new Xbox 360 devicesNicolas Léveillé
Added two new Xbox 360 devices: - HORI Real Arcade Pro.EX - Mad Catz SFIV Fightpad Signed-off-by: Nicolas Léveillé <nicolas@uucidl.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-30sh: Move KEYSC header fileMagnus Damm
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-23Input: polled device - do not start polling if interval is zeroSamu Onkalo
If the poll interval is set to 0 via new sysfs entry and device is opened after that, polling is started with interval 0. This causes huge CPU load. Same happens if the rate was 0 when the device was closed and then reopened. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: polled device - schedule first poll immediatelyDmitry Torokhov
It does not make sense to wait poll_interval before performing first read after opening the device, schedule the read immediately instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: add S3C24XX touchscreen driverArnaud Patard
S3C24XX touchscreen driver, originally written by Arnaud Patard and other contributors. The driver has had substantial testing as well as a number of tidying up passes done by Ben Dooks, as noted: - added kernel-doc comments to most of the routines - removed old code from pre adc framework days - updated device probe code to use platform id list matching - cleaned up debug, since printk() now has timestamp feature - ensure code uses dev_() reporting macros where necessary - remove ABS_PRESSURE reporting, tslib can be fixed - ensure timer is removed on driver exit - move to using dev_pmops for power management Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: usbtouchscreen - add support for Zytronic capacitive touchscreenDaniel Silverstone
Zytronic USB-attached capacitive touchscreen support within the generic USB touchscreen driver. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: force feedback - fix function name in commentRoger Quadros
Function name is input_ff_destroy() and not input_ff_free() Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: do not overwrite the first part of phys stringMárton Németh
Use strlcat() to append a string to the previously created first part. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: ads7846 - switch to using dev_vdbg()Pavel Machek
Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: ads7846 - fix pressure reportingPavel Machek
On Zaurus, hx4700 and others pressure is reported inverted -- the lighter the pressure, the bigger numerical value. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: usbtouchscreen - remove unneeded usb_kill_urbOliver Neukum
usb_kill_urb() in disconnect is not needed as unregistering will cause close() to be called. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-22Merge 7xx-iosplit-plat-merge with omap-fixesTony Lindgren
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
2009-11-20AT91: add touchscreen support for at91sam9g45ekesNicolas Ferre
New at91sam9g45ekes board provides a LCD with resistive touchscreen. This is the support of this feature by atmel_tsadcc driver. This also sets up platform parameters to be passed to the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20Input: atmel_tsadcc - use platform parametersNicolas Ferre
Add a number of plafrom dependent parameters to atmel_tsadcc. The touchscreeen driver can now take into account the slight differences that exist between IPs included in diferent products. This will also allow to adapt its behaivior to the caracteristics of the resistive panel used. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20Input: atmel_tsadcc - rework setting touchscreen capabilitiesNicolas Ferre
Tiny patch for setting capabilities using input API function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20Input: ALPS - add support for touchpads with 4-directional buttonMaxim Levitsky
The touchpad on Acer Aspire 5720, 5520 and some other Aspire models (signature 0x73, 0x02, 0x50) has a button that can be rocked in 4 different directions. Make the driver to generate BTN_0..BTN_3 events in response. The Synaptics driver by default maps BTN_0 and BTN_1 to up and down, so there should be no visible changes with the old setup that generated BTN_FORWARD and BTN_BACK (also mapped to up and down). Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 18:46:27 +0000