path: root/drivers/base/regmap/regmap-irq.c
AgeCommit message (Collapse)Author
2015-08-21regmap: Split use_single_rw internally into use_single_read/writeMarkus Pargmann
use_single_rw currently reflects the capabilities of the connected device. The capabilities of the bus are currently missing for this variable. As there are read only and write only buses we need seperate values for use_single_rw to also reflect tha capabilities of the bus. This patch splits use_single_rw into use_single_read and use_single_write. The initialization is changed to check the configuration for use_single_rw and to check the capabilities of the used bus. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09regmap: kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also set IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02regmap: irq: Fixed a typo errordashsriram
Fixed a typo error in the file Signed-off-by: Sriram Dash <dash.sriram@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27regmap: Constify irq_domain_opsKrzysztof Kozlowski
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-14regmap-irq: set IRQF_ONESHOT flag to ensure IRQ requestValentin Rothberg
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. The %irq_flags flag is used to request the threaded IRQ and is also a parameter of the caller. Hence, we cannot be sure that IRQF_ONESHOT is set. This change avoids the potentially missing flag by setting IRQF_ONESHOT when requesting the threaded IRQ. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-05-26regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'chip->num_regs' will always be none zero from the users, and then if 'chip->num_regs' equals to zero by mistake or other reasons, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just checking the 'chip->num_regs' before calling kzalloc(). This also sorts the header files in alphabetical order at the same time. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-13regmap: irq: Set data pointer only on regmap_add_irq_chip successKrzysztof Kozlowski
After setting the 'data' pointer (wchich is returned to the caller for freeing later) the regmap_add_irq_chip() could still fail for various reasons (ENOMEM, regmap_read or regmap_write failure). In such case the memory under 'data' was freed in error path and error value was returned but the 'data' variable was not changed. This could lead to errors if the caller passed such 'data' to regmap_del_irq_chip(). The 'data' pointer should be changed atomically from the caller perspective - set it only on regmap_add_irq_chip() success. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03regmap: irq: Remove domain on exitMark Brown
irqdomain now supports removal of domains on exit so we can properly clean up on deletion of a regmap irqchip. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-16regmap: irq: Allow using zero value for ack_baseAlexander Shiyan
In some cases, clear interrupt register may be at address 0. This patch allows to use such configurations by adding additional configuration bit to indicate this. [With doc fix from Levente Kurusa <levex@linux.com> -- broonie] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22regmap: irq: clear status when disable irqYi Zhang
clear the status bit if the mask register doesn't prevent the chip level irq from being asserted OR in the following sequence, there will be irq storm happens: 1) interrupt is triggered; 2) another thread disables it(the mask bit is set); 3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared), and it's ignored; 4) if the irq is still asserted because of the uncleared status bit, the irq storm happens; Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-23regmap: irq: Allow to acknowledge masked interrupts during initializationPhilipp Zabel
In case the hardware interrupt mask register does not prevent the chip level irq from being asserted by the corresponding interrupt status bit, already set interrupt bits should to be cleared once after masking them during initialization. Add a flag to let drivers enable this behavior. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-03-19regmap: irq: Clarify error message when we fail to request primary IRQMark Brown
Display the name for the chip rather than just the primary IRQ so it is clearer what exactly has failed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01regmap: irq: call pm_runtime_put in pm_runtime_get_sync failed caseLi Fei
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put(_sync) in such case. Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04regmap: irq: Support wake IRQ mask inversionMark Brown
Support devices which have an enable rather than mask register for wake sources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04regmap: irq: Fix sync of wake statuses to hardwareMark Brown
This wasn't implemented but happened to work on test systems due to lack of wake mask inversion support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04regmap: irq: Use a bulk read for interrupt status where possibleMark Brown
If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03regmap: irq: Factor register read out of the IRQ parsing loopMark Brown
In preparation for adding back support for block reads. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24regmap: irq: enable wake support by defaultLaxman Dewangan
regmap-irq framework is used vastly by mfd drivers and some of devices like TPS65910, TPS80036 do not support the wake base register to enable wake. Currently wake in regmap-irq only supported if client driver passes the wake base register. As the regmap-irq is mostly used by mfd devices and it is require to have wake support from these devices in most of use cases, enabling wake support by default in regmap-irq. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-15regmap: irq: Allow users to retrieve the irq_domainMark Brown
This is useful for integration with other subsystems, especially MFD, and provides an alternative API for users that request their own IRQs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-09regmap: no need primary handler for nested irqYunfan Zhang
The primary handler will NOT be called if the interrupt nests into another interrupt thread. Remove it to avoid confusing. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-30regmap: irq: Add mask invert flag for enable registerXiaofan Tian
Currently, regmap will write 1 to mask_base to mask an interrupt and write 0 to unmask it. But some chips do not have an interrupt mask register, and only have interrupt enable register. Then we should write 0 to disable interrupt and 1 to enable. So add an mask_invert flag to handle this. If it is not set, behavior is same as previous. If set it to 1, the mask value will be inverted before written to mask_base Signed-off-by: Xiaofan Tian <tianxf@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-07regmap: irq: Enable devices for runtime PM while handling interruptsMark Brown
Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-04regmap: irq: initialize all irqs to wake disabledStephen Warren
The kerneldoc for irq_set_irq_wake() says: Enable/disable power management wakeup mode, which is disabled by default. regmap_irq_set_wake() clears bits to enable wake for an interrupt, and sets bits to disable wake. Hence, we should set all bits in wake_buf initially, to mirror the expected disabled state. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-04regmap: set MASK_ON_SUSPEND/SKIP_SET_WAKE if no wake_baseStephen Warren
If a regmap-irq chip has no wake base: * There's no point calling .irq_set_wake, hence IRQCHIP_SKIP_SET_WAKE. * If some IRQs in the chip are enabled for wake and some aren't, we should mask those interrupts that are not wake enabled, so that if they occur during suspend, the system is not awoken. Hence, IRQCHIP_MASK_ON_SUSPEND. Note that IRQCHIP_MASK_ON_SUSPEND is handled by check_wakeup_irqs(), which always iterates over every single interrupt in the system, irrespective of whether an interrupt is a child of a controller whose output interrupt has no wake-enabled inputs and hence is presumably masked itself. Hence this change might cause interrupt unnecessary masking operations and associated register I/O. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-04regmap: name irq_chip based on regmap_irq_chip's nameStephen Warren
This is intended to give each irq_chip a useful name, rather than hard- coding them all as "regmap". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-04regmap: store irq_chip inside regmap_irq_chip_dataStephen Warren
This will allow later patches to adjust portions of the irq_chip individually for each regmap_irq_chip that is created. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-04regmap: irq: Only update mask bits when doing initial maskMark Brown
Don't write the full register, it's possible there's bits other than the masks in the same register which we shouldn't be changing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-08-04regmap: fix some error messages to take account of irq_reg_strideStephen Warren
A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-22Merge branches 'regmap-core', 'regmap-irq' and 'regmap-page' into regmap-nextMark Brown
Conflicts (trivial context stuff): drivers/base/regmap/regmap.c include/linux/regmap.h
2012-06-05regmap: Implement support for wake IRQsMark Brown
Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05regmap: Don't try to map non-existant IRQsMark Brown
If the driver supplied an empty entry in the array of IRQs then return an error rather than trying to do the mapping. This is intended for use with handling chip variants and similar situations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regmap: Constify regmap_irq_chipMark Brown
We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17regmap: Fix typo in IRQ register stridingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regmap: add support for non contiguous status to regmap-irqGraeme Gregory
In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regmap: Convert regmap_irq to use irq_domainMark Brown
This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge branches 'regmap-core', 'regmap-stride', 'regmap-mmio' and ↵Mark Brown
'regmap-irq' into regmap-next
2012-05-13regmap: Pass back the allocated regmap IRQ controller dataMark Brown
It's needed for freeing and for obtaining the IRQ base later on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-11regmap: fix compile errors in regmap-irq.c due to stride changesStephen Warren
Commit f01ee60fffa4 ("regmap: implement register striding") caused the compile errors below. Fix them. drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_sync_unlock': drivers/base/regmap/regmap-irq.c:62:12: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c:62:12: note: each undeclared identifier is reported only once for each function it appears in drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_enable': drivers/base/regmap/regmap-irq.c:77:37: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_disable': drivers/base/regmap/regmap-irq.c:85:37: error: 'map' undeclared (first use in this function) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10regmap: implement register stridingStephen Warren
regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11device.h: cleanup users outside of linux/include (C files)Paul Gortmaker
For files that are actively using linux/device.h, make sure that they call it out. This will allow us to clean up some of the implicit uses of linux/device.h within include/* without introducing build regressions. Yes, this was created by "cheating" -- i.e. the headers were cleaned up, and then the fallout was found and fixed, and then the two commits were reordered. This ensures we don't introduce build regressions into the git history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-05regmap: Add irq_base accessor to regmap_irqMark Brown
Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28regmap: Report if we actually handled an interrupt in regmap-irqMark Brown
While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08regmap: Add a reusable irq_chip for regmap based interrupt controllersMark Brown
There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>