aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2017-03-18nfit, libnvdimm: fix interleave set cookie calculationDan Williams
commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream. The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19ACPI / APEI: Fix NMI notification handlingPrarit Bhargava
commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for HP Pavilion dv6Hans de Goede
commit 6276e53fa8c06a3a5cf7b95b77b079966de9ad66 upstream. The HP Pavilion dv6 has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there are quite a few HP Pavilion dv6 variants, some woth ATI and some with NVIDIA hybrid gfx, both seem to need this quirk to have working backlight control. There are also some versions with only Intel integrated gfx, these may not need this quirk, but it should not hurt there. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1204476 Link: https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1416940 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09ACPI / video: Add force_native quirk for Dell XPS 17 L702XHans de Goede
commit 350fa038c31b056fc509624efb66348ac2c1e3d0 upstream. The Dell XPS 17 L702X has a non-working acpi_video0 backlight interface and an intel_backlight interface which works fine. Add a force_native quirk for it so that the non-working acpi_video0 interface does not get registered. Note that there also is an issue with the brightnesskeys on this laptop, they do not generate key-press events in anyway. That is not solved by this patch. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123661 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18ACPI / APEI: Fix incorrect return value of ghes_proc()Punit Agrawal
commit 806487a8fc8f385af75ed261e9ab658fc845e633 upstream. Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a49113a4a33 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by: Punit Agrawal <punit.agrawa.@arm.com> Tested-by: Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by: Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28acpi, nfit: check for the correct event code in notificationsVishal Verma
commit c09f12186d6b03b798832d95289af76495990192 upstream. Commit 209851649dc4 "acpi: nfit: Add support for hot-add" added support for _FIT notifications, but it neglected to verify the notification event code matches the one in the ACPI spec for "NFIT Update". Currently there is only one code in the spec, but once additional codes are added, older kernels (without this fix) will misbehave by assuming all event notifications are for an NFIT Update. Fixes: 209851649dc4 ("acpi: nfit: Add support for hot-add") Cc: <stable@vger.kernel.org> Cc: <linux-acpi@vger.kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ACPICA: acpi_get_sleep_type_data: Reduce warningsPrarit Bhargava
commit a59b679ab85635737947310323f2f2bcfa0664a7 upstream. ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8 Eliminate warnings for "not found" _Sx errors, since these are optional. Original NOT_FOUND status is still returned. Original changes by Prarit Bhargava. ACPICA BZ 1208. Link: https://github.com/acpica/acpica/commit/7bb77313 Link: https://bugs.acpica.org/show_bug.cgi?id=1208 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Charles (Chas) Williams" <ciwillia@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC presentLukasz Anaczkowski
commit 702b07fcc9b264c9afd372676bbdd50a762dcde0 upstream. SRAT maps APIC ID to proximity domains ids (PXM). Mapping from PXM to NUMA node ids is based on order of entries in SRAT table. SRAT table has just LAPIC entires or mix of LAPIC and X2APIC entries. As long as there are only LAPIC entires, mapping from proximity domain id to NUMA node id is as assumed by BIOS. However, once APIC entries are mixed, X2APIC entries would be first mapped which causes unexpected NUMA node mapping. To fix that, change parsing to check each entry against both LAPIC and X2APIC so mapping is in the SRAT/PXM order. This is supplemental change to the fix made by commit d81056b5278 (Handle apic/x2apic entries in MADT in correct order) and using the mechanism introduced by 9b3fedd (ACPI / tables: Add acpi_subtable_proc to ACPI table parsers). Fixes: d81056b5278 (Handle apic/x2apic entries in MADT in correct order) Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> [ rjw : Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / sysfs: fix error code in get_status()Dan Carpenter
commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream. The problem with ornamental, do-nothing gotos is that they lead to "forgot to set the error code" bugs. We should be returning -EINVAL here but we don't. It leads to an uninitalized variable in counter_show(): drivers/acpi/sysfs.c:603 counter_show() error: uninitialized symbol 'status'. Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / drivers: replace acpi_probe_lock spinlock with mutexLorenzo Pieralisi
commit 5331d9cab32ef640b4cd38a43b0858874fbb7168 upstream. Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid dataHoan Tran
commit 2324d15447a9db168b1f85e3feac635b1ff8edb8 upstream. When CPPC fails to request a PCC channel, the CPC data is freed and cpc_desc_ptr points to the invalid data. Avoid this issue by moving the cpc_desc_ptr assignment after the PCC channel request. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ACPI: CPPC: Return error if _CPC is invalid on a CPUHoan Tran
commit 8343c40d3de32ebfe8f48b043964e4ba0e7701f7 upstream. Based on 8.4.7.1 section of ACPI 6.1 specification, if the platform supports CPPC, the _CPC object must exist under all processor objects. If cpc_desc_ptr pointer is invalid on any CPUs, acpi_get_psd_map() should return error and CPPC cpufreq driver can not be registered. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07libnvdimm, nd_blk: mask off reserved status bitsRoss Zwisler
commit 68202c9f0ad6e16ee806fbadbc5838d55fe5aa5c upstream. The "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf ...defines the layout of the block window status register. For the July 2016 version of the spec linked to above, this happens in Figure 4 on page 26. The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest of the bits in the status register are reserved, and there is a warning following the diagram that says: Note: The driver cannot assume the value of the RESERVED bits in the status register are zero. These reserved bits need to be masked off, and the driver must avoid checking the state of those bits. This change ensures that for hardware implementations that set these reserved bits in the status register, the driver won't incorrectly fail the block I/Os. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng
commit e1191bd4f62d9086a1a47adc286e7fcffc1fa55c upstream. A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-01ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal stringsLv Zheng
commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 upstream. The order of the _OSI related functionalities is as follows: acpi_blacklisted() acpi_dmi_osi_linux() acpi_osi_setup() acpi_osi_setup() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< parse_args() __setup("acpi_osi=") acpi_osi_setup_linux() acpi_update_interfaces() if "!*" <<<<<<<<<<<<<<<<<<<<<<<< acpi_early_init() acpi_initialize_subsystem() acpi_ut_initialize_interfaces() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ acpi_bus_init() acpi_os_initialize1() acpi_install_interface_handler(acpi_osi_handler) acpi_osi_setup_late() acpi_update_interfaces() for "!" >>>>>>>>>>>>>>>>>>>>>>>> acpi_osi_handler() Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command line setting can override the DMI detection. That's why acpi_blacklisted() is put before __setup("acpi_osi="). Then we can notice the following wrong invocation order. There are acpi_update_interfaces() (marked by <<<<) calls invoked before acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible to use acpi_osi=!* correctly from OSI DMI table or from the command line. The use of acpi_osi=!* is meant to disable both ACPICA (acpi_gbl_supported_interfaces) and Linux specific strings (osi_setup_entries) while the ACPICA part should have stopped working because of the order issue. This patch fixes this issue by moving acpi_update_interfaces() to where it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux specific strings are still handled in the original place in order to make the following command line working: acpi_osi=!* acpi_osi="Module Device". Note that since acpi_osi=!* is meant to further disable linux specific string comparing to the acpi_osi=!, there is no such use case in our bug fixing work and hence there is no one using acpi_osi=!* either from the command line or from the DMI quirks, this issue is just a theoretical issue. Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings) Tested-by: Lukas Wunner <lukas@wunner.de> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ACPI / processor: Request native thermal interrupt handling via _OSCSrinivas Pandruvada
commit a21211672c9a1d730a39aa65d4a5b3414700adfb upstream. There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ACPICA: Dispatcher: Update thread ID for recursive method callsPrarit Bhargava
commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream. ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava <prarit@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"Bjorn Helgaas
commit 6c777e8799a93e3bdb67bec622429e1b48dc90fb upstream. 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e59090, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e59090 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by: Sunjin Yang <fan4326@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"Bjorn Helgaas
commit 67b4eab91caf2ad574cab1b17ae09180ea2e116e upstream. Revert 811a4e6fce09 ("PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"). This is part of reverting 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12ACPI / PM: Runtime resume devices when waking from hibernateLukas Wunner
commit fbda4b38fa3995aa0777fe9cbbdcb223c6292083 upstream. Commit 58a1fbbb2ee8 ("PM / PCI / ACPI: Kick devices that might have been reset by firmware") added a runtime resume for devices that were runtime suspended when the system entered suspend-to-RAM. Briefly, the motivation was to ensure that devices did not remain in a reset-power-on state after resume, potentially preventing deep SoC-wide low-power states from being entered on idle. Currently we're not doing the same when leaving suspend-to-disk and this asymmetry is a problem if drivers rely on the automatic resume triggered by pm_complete_with_resume_check(). Fix it. Fixes: 58a1fbbb2ee8 (PM / PCI / ACPI: Kick devices that might have been reset by firmware) Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12PCI: ACPI: IA64: fix IO port generic range checkLorenzo Pieralisi
commit 4a2e7aab4ffce1e0e79b303dc2f9a03aa9f3a332 upstream. The [0 - 64k] ACPI PCI IO port resource boundary check in: acpi_dev_ioresource_flags() is currently applied blindly in the ACPI resource parsing to all architectures, but only x86 suffers from that IO space limitation. On arches (ie IA64 and ARM64) where IO space is memory mapped, the PCI root bridges IO resource windows are firstly initialized from the _CRS (in acpi_decode_space()) and contain the CPU physical address at which a root bridge decodes IO space in the CPU physical address space with the offset value representing the offset required to translate the PCI bus address into the CPU physical address. The IO resource windows are then parsed and updated in arch code before creating and enumerating PCI buses (eg IA64 add_io_space()) to map in an arch specific way the obtained CPU physical address range to a slice of virtual address space reserved to map PCI IO space, ending up with PCI bridges resource windows containing IO resources like the following on a working IA64 configuration: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] This implies that the [0 - 64K] check in acpi_dev_ioresource_flags() leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel can't claim IO resources since the host bridge IO resource is disabled and discarded by ACPI core code, see log on IA64 with missing root bridge IO resource, silently filtered by current [0 - 64k] check in acpi_dev_ioresource_flags()): PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] [...] pci 0000:00:03.0: [1002:515e] type 00 class 0x030000 pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref] pci 0000:00:03.0: reg 0x14: [io 0x1000-0x10ff] pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff] pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref] pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: can't claim BAR 1 [io 0x1000-0x10ff]: no compatible bridge window For this reason, the IO port resources boundaries check in generic ACPI parsing code should be guarded with a CONFIG_X86 guard so that more arches (ie ARM64) can benefit from the generic ACPI resources parsing interface without incurring in unexpected resource filtering, fixing at the same time current breakage on IA64. This patch factors out IO ports boundary [0 - 64k] check in generic ACPI code and makes the IO space check X86 specific to make sure that IO space resources are usable on other arches too. Fixes: 3772aea7d6f3 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge) Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03nfit: fix multi-interface dimm handling, acpi6.1 compatibilityDan Williams
commit 6697b2cf69d4363266ca47eaebc49ef13dabc1c9 upstream. ACPI 6.1 clarified that multi-interface dimms require multiple control region entries (DCRs) per dimm. Previously we were assuming that a control region is only present when block-data-windows are present. This implementation was done with an eye to be compatibility with the looser ACPI 6.0 interpretation of this table. 1/ When coalescing the memory device (MEMDEV) tables for a single dimm, coalesce on device_handle rather than control region index. 2/ Whenever we disocver a control region with non-zero block windows re-scan for block-data-window (BDW) entries. We may need to revisit this if a DIMM ever implements a format interface outside of blk or pmem, but that is not on the foreseeable horizon. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"Hans de Goede
commit b186b4dcb79b1914c3dadb27ac72dafaa4267998 upstream. The quirk to get "acpi_backlight=vendor" behavior by default on the Dell Inspiron 5737 was added before we started doing "acpi_backlight=native" by default on Win8 ready machines. Since we now avoid using acpi-video as backlight driver on these machines by default (using the native driver instead) we no longer need this quirk. Moreover the vendor driver does not work after a suspend/resume where as the native driver does. This reverts commit 08a56226d847 (ACPI / video: Add Dell Inspiron 5737 to the blacklist). Link: https://bugzilla.kernel.org/show_bug.cgi?id=111061 Reported-and-tested-by: erusan@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite ↵Hans de Goede
R830 commit b21f2e81bd3fd8ed260590e72901254bca2193cd upstream. The Toshiba Satellite R830 needs disable_backlight_sysfs_if=1, just like the Toshiba Portege R830. Add a quirk for this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012 Tested-by: To Do <entodoays@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700Hans de Goede
commit de588b8ff057d4de0751f337b930f90ca522bab2 upstream. The Toshiba Portege R700 needs disable_backlight_sysfs_if=1, just like the Toshiba Portege R830. Add a quirk for this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012 Tested-by: Emma Reisz <emmareisz@outlook.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08ACPI / property: avoid leaking format string into kobject nameKees Cook
The dn->name is expected to be used as a literal, so add the missing "%s". Fixes: 263b4c1a64bc (ACPI / property: Expose data-only subnodes via sysfs) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-21ACPI / processor: Fix thermal cooling device regressionSrinivas Pandruvada
The processor cooling device is no longer present for passive thermal control. Commit 239708a3af44 ("ACPI: Split out ACPI PSS from ACPI Processor driver") moved the processing to a new function acpi_pss_perf_init(), but missed "return 0" after successful creation. This causes the error handling functions to be called, which will delete the previously created processor cooling device. Fixes: 239708a3af44 (ACPI: Split out ACPI PSS from ACPI Processor driver) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11nfit: acpi_nfit_notify(): Do not leave device lockedAlexey Khoroshilov
Even if dev->driver is null because we are being removed, it is safer to not leave device locked. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-04Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - NFIT parsing regression fixes from Linda. The nvdimm hot-add implementation merged in 4.4-rc1 interpreted the specification in a way that breaks actual HPE platforms. We are also closing the loop with the ACPI Working Group to get this clarification added to the spec. - Andy pointed out that his laptop without nvdimm resources is loading the e820-nvdimm module by default, fix that up to only load the module when an e820-type-12 range is present. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Adjust for different _FIT and NFIT headers nfit: Fix the check for a successful NFIT merge nfit: Account for table size length variation libnvdimm, e820: skip module loading when no type-12
2015-12-04Merge branches 'acpica', 'acpi-video' and 'device-properties'Rafael J. Wysocki
* acpica: ACPI: Better describe ACPI_DEBUGGER * acpi-video: MAINTAINERS: ACPI / video: update a file name in drivers/acpi/ * device-properties: ACPI / property: fix compile error for acpi_node_get_property_reference() when CONFIG_ACPI=n
2015-12-04Merge branches 'acpi-pci' and 'pm-pci'Rafael J. Wysocki
* acpi-pci: x86/PCI/ACPI: Fix regression caused by commit 4d6b4e69a245 * pm-pci: PCI / PM: Tune down retryable runtime suspend error messages
2015-12-02x86/PCI/ACPI: Fix regression caused by commit 4d6b4e69a245Liu Jiang
Commit 4d6b4e69a245 ("x86/PCI/ACPI: Use common interface to support PCI host bridge") converted x86 to use the common interface acpi_pci_root_create, but the conversion missed on code piece in arch/x86/pci/bus_numa.c, which causes regression on some legacy AMD platforms as reported by Arthur Marsh <arthur.marsh@internode.on.net>. The root causes is that acpi_pci_root_create() fails to insert host bridge resources into iomem_resource/ioport_resource because x86_pci_root_bus_resources() has already inserted those resources. So change x86_pci_root_bus_resources() to not insert resources into iomem_resource/ioport_resource. Fixes: 4d6b4e69a245 ("x86/PCI/ACPI: Use common interface to support PCI host bridge") Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Reported-and-tested-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reported-and-tested-by: Keith Busch <keith.busch@intel.com> Reported-and-tested-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30nfit: Adjust for different _FIT and NFIT headersLinda Knippers
When support for _FIT was added, the code presumed that the data returned by the _FIT method is identical to the NFIT table, which starts with an acpi_table_header. However, the _FIT is defined to return a data in the format of a series of NFIT type structure entries and as a method, has an acpi_object header rather tahn an acpi_table_header. To address the differences, explicitly save the acpi_table_header from the NFIT, since it is accessible through /sys, and change the nfit pointer in the acpi_desc structure to point to the table entries rather than the headers. Reported-by: Jeff Moyer (jmoyer@redhat.com> Signed-off-by: Linda Knippers <linda.knippers@hpe.com> Acked-by: Vishal Verma <vishal.l.verma@intel.com> [vishal: fix up unit test for new header assumptions] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-30nfit: Fix the check for a successful NFIT mergeLinda Knippers
Missed previously due to a lack of test coverage on a platform that provided an valid response to _FIT. Signed-off-by: Linda Knippers <linda.knippers@hpe.com> Acked-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-30nfit: Account for table size length variationLinda Knippers
The size of NFIT tables don't necessarily match the size of the data structures that we use for them. For example, the NVDIMM Control Region Structure table is shorter for a device with no block control windows than for a device with block control windows. Other tables, such as Flush Hint Address Structure and the Interleave Structure are variable length by definition. Account for the size difference when comparing table entries by using the actual table size from the table header if it's less than the structure size. Signed-off-by: Linda Knippers <linda.knippers@hpe.com> Acked-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-30ACPI: Better describe ACPI_DEBUGGERPeter Zijlstra
Hi, For a brief moment I was tricked into thinking that: In-kernel debugger (EXPERIMENTAL) (ACPI_DEBUGGER) [N/y/?] (NEW) might be something useful. Better describe the feature to reduce such confusion. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-20Merge branches 'acpi-smbus', 'acpi-ec' and 'acpi-pci'Rafael J. Wysocki
* acpi-smbus: Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook" ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code * acpi-ec: ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query() * acpi-pci: PCI: Fix OF logic in pci_dma_configure()
2015-11-20Merge branches 'pm-cpufreq' and 'acpi-cppc'Rafael J. Wysocki
* pm-cpufreq: Revert "Documentation: kernel_parameters for Intel P state driver" cpufreq: mediatek: fix build error cpufreq: intel_pstate: Add separate support for Airmont cores cpufreq: intel_pstate: Replace BYT with ATOM Revert "cpufreq: intel_pstate: Use ACPI perf configuration" Revert "cpufreq: intel_pstate: Avoid calculation for max/min" * acpi-cppc: ACPI / CPPC: Use h/w reduced version of the PCCT structure
2015-11-16ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()Markus Elfring
The acpi_ec_delete_query() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"Chris Bainbridge
Revert commit 3349fb64b292 (ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook), since the delay introduced by it is not necessary any more after commit add68d6aa9e2 (ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code). Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-16ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant codeChris Bainbridge
In the SBS initialisation, a reentrant call to wait_event_timeout() causes an intermittent boot stall of several minutes usually following the "Switching to clocksource tsc" message. Another symptom of this bug is high CPU usage from programs (Firefox, upowerd) querying the battery state. This is caused by: 1. drivers/acpi/sbshc.c wait_transaction_complete() calls wait_event_timeout(): if (wait_event_timeout(hc->wait, smb_check_done(hc), msecs_to_jiffies(timeout))) 2. ___wait_event sets task state to uninterruptible 3. ___wait_event calls the "condition" smb_check_done() 4. smb_check_done (sbshc.c) calls through to ec_read() in drivers/acpi/ec.c 5. ec_guard() is reached which calls wait_event_timeout() if (wait_event_timeout(ec->wait, ec_transaction_completed(ec), guard)) ie. wait_event_timeout() is being called again inside evaluation of the previous wait_event_timeout() condition 5. The EC IRQ handler calls wake_up() and wakes up the sleeping task in ec_guard() 6. The task is now in state running even though the wait "condition" is still being evaluated 7. The "condition" check returns false so ___wait_event calls schedule_timeout() 8. Since the task state is running, the scheduler immediately schedules it again 9. This loop usually repeats for around 250 seconds even though the original wait_event_timeout was only 1000ms. The timeout is incorrect because each call to schedule_timeout() usually returns immediately, taking less than 1ms, so the jiffies timeout counter is not decremented. The task is now stuck in a running state, and so is highly likely to be immediately rescheduled, which takes less than a jiffy. The loop will never exit if all schedule_timeout() calls take less than a jiffy. Fix this by replacing SMBus reads in the wait_event_timeout condition with checks of a boolean value that is updated by the EC query handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=107191 Link: https://lkml.org/lkml/2015/11/6/776 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-14ACPI / CPPC: Use h/w reduced version of the PCCT structureAshwin Chaugule
CPPC is enabled only on platforms which support the h/w reduced ACPI specification, so use the h/w reduced version of the PCCT consistently when deferencing PCCT contents. Fixes: 337aadff8e45 (ACPI: Introduce CPU performance controls using CPPC) Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-12Merge tag 'pm+acpi-4.4-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The only new feature in this batch is support for the ACPI _CCA device configuration object, which it a pre-requisite for future ACPI PCI support on ARM64, but should not affect the other architectures. The rest is fixes and cleanups, mostly in cpufreq (including intel_pstate), the Operating Performace Points (OPP) framework and tools (cpupower and turbostat). Specifics: - Support for the ACPI _CCA configuration object intended to tell the OS whether or not a bus master device supports hardware managed cache coherency and a new set of functions to allow drivers to check the cache coherency support for devices in a platform firmware interface agnostic way (Suravee Suthikulpanit, Jeremy Linton). - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X (Aaron Lu, Hans de Goede). - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers (Jon Medhurst, Nicolas Pitre). - kfree()-related fixup for the recently introduced CPPC cpufreq frontend (Markus Elfring). - intel_pstate fix reducing kernel log noise on systems where P-states are managed by hardware (Prarit Bhargava). - intel_pstate maintainers information update (Srinivas Pandruvada). - cpufreq core optimization related to the handling of delayed work items used by governors (Viresh Kumar). - Locking fixes and cleanups of the Operating Performance Points (OPP) framework (Viresh Kumar). - Generic power domains framework cleanups (Lina Iyer). - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas Renninger). - turbostat tool updates (Len Brown)" * tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting cpufreq: CPPC: Delete an unnecessary check before the function call kfree() PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp() PM / OPP: Hold dev_opp_list_lock for writers PM / OPP: Protect updates to list_dev with mutex PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus() cpufreq: s5pv210-cpufreq: fix wrong do_div() usage MAINTAINERS: update for intel P-state driver Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus ...
2015-11-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...
2015-11-10Merge tag 'libnvdimm-for-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Outside of the new ACPI-NFIT hot-add support this pull request is more notable for what it does not contain, than what it does. There were a handful of development topics this cycle, dax get_user_pages, dax fsync, and raw block dax, that need more more iteration and will wait for 4.5. The patches to make devm and the pmem driver NUMA aware have been in -next for several weeks. The hot-add support has not, but is contained to the NFIT driver and is passing unit tests. The coredump support is straightforward and was looked over by Jeff. All of it has received a 0day build success notification across 107 configs. Summary: - Add support for the ACPI 6.0 NFIT hot add mechanism to process updates of the NFIT at runtime. - Teach the coredump implementation how to filter out DAX mappings. - Introduce NUMA hints for allocations made by the pmem driver, and as a side effect all devm allocations now hint their NUMA node by default" * tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: coredump: add DAX filtering for FDPIC ELF coredumps coredump: add DAX filtering for ELF coredumps acpi: nfit: Add support for hot-add nfit: in acpi_nfit_init, break on a 0-length table pmem, memremap: convert to numa aware allocations devm_memremap_pages: use numa_mem_id devm: make allocations numa aware by default devm_memremap: convert to return ERR_PTR devm_memunmap: use devres_release() pmem: kill memremap_pmem() x86, mm: quiet arch_add_memory()
2015-11-07Merge branches 'acpi-video' and 'acpi-cppc'Rafael J. Wysocki
* acpi-video: ACPI / video: only register backlight for LCD device ACPI / video: Add a quirk to force acpi-video backlight on Dell XPS L421X * acpi-cppc: cpufreq: CPPC: Delete an unnecessary check before the function call kfree()
2015-11-07Merge branch 'acpi-pci'Rafael J. Wysocki
* acpi-pci: PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting Conflicts: drivers/crypto/ccp/ccp-platform.c
2015-11-07device property: ACPI: Make use of the new DMA Attribute APIsSuthikulpanit, Suravee
Now that we have the new DMA attribute APIs, we can replace the older acpi_check_dma() and device_dma_is_coherent(). Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07ACPI: Adding DMA Attribute APIs for ACPI DeviceSuthikulpanit, Suravee
Adding acpi_get_dma_attr() to query DMA attributes of ACPI devices. It returns the enum dev_dma_attr, which communicates DMA information more clearly. This API replaces the acpi_check_dma(), which will be removed in subsequent patch. This patch also provides a convenient function, acpi_dma_supported(), to check DMA support of the specified ACPI device. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-24 19:16:09 +0000