aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-09-26ARM: 7538/1: delay: add registration mechanism for delay timer sourcesJonathan Austin
The current timer-based delay loop relies on the architected timer to initiate the switch away from the polling-based implementation. This is unfortunate for platforms without the architected timers but with a suitable delay source (that is, constant frequency, always powered-up and ticking as long as the CPUs are online). This patch introduces a registration mechanism for the delay timer (which provides an unconditional read_current_timer implementation) and updates the architected timer code to use the new interface. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-15ARM: 7522/1: arch_timers: register a time/cycle counterMarc Zyngier
Some subsystems (KVM for example) need access to a cycle counter. In the KVM case, this is used to measure the time delta between host and guest in order to accurately generate timer events for the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-15ARM: 7523/1: arch_timers: enable the use of the virtual timerMarc Zyngier
At the moment, the arch_timer driver only uses the physical timer, which can cause problem if PL2 hasn't enabled PL1 access in CNTHCTL, which is likely in a virtualized environment. Instead, the virtual timer is always available. This patch enables the use of the virtual timer, unless no interrupt is provided in the DT for it, in which case it falls back to the physical timer. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-08Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "Another set of fixes for ARM dma-mapping subsystem. Commit e9da6e9905e6 replaced custom consistent buffer remapping code with generic vmalloc areas. It however introduced some regressions caused by limited support for allocations in atomic context. This series contains fixes for those regressions. For some subplatforms the default, pre-allocated pool for atomic allocations turned out to be too small, so a function for setting its size has been added. Another set of patches adds support for atomic allocations to IOMMU-aware DMA-mapping implementation. The last part of this pull request contains two fixes for Contiguous Memory Allocator, which relax too strict requirements." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: atomic_pool with struct page **pages ARM: Kirkwood: increase atomic coherent pool size ARM: DMA-Mapping: print warning when atomic coherent allocation fails ARM: DMA-Mapping: add function for setting coherent pool size from platform code ARM: relax conditions required for enabling Contiguous Memory Allocator mm: cma: fix alignment requirements for contiguous regions
2012-09-06Merge tag 'stable/for-linus-3.6-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: * Fix for TLB flushing introduced in v3.6 * Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but in a 32-bit kernel we need to allocate for coherent pages from a 32-bit pool. * When trying to re-use P2M nodes we had a one-off error and triggered a BUG_ON check with specific CONFIG_ option. * When doing FLR in Xen-PCI-backend we would first do FLR then save the PCI configuration space. We needed to do it the other way around. * tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Fix proper FLR steps. xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory.
2012-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Olof Johansson: "Mostly Renesas and Atmel bugfixes this time, targeting boot and build problems. A couple of patches for gemini and kirkwood as well. On a whole nothing very controversial." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: gemini: fix the gemini build ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order ARM: shmobile: marzen: fixup smsc911x id for regulator ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-09-05uml: fix compile error in deliver_alarm()Miklos Szeredi
Fix the following compile error on UML. arch/um/os-Linux/time.c: In function 'deliver_alarm': arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler' arch/um/os-Linux/internal.h:1:6: note: declared here The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest process") in 3.6-rc1. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-05xen: fix logical error in tlb flushingAlex Shi
While TLB_FLUSH_ALL gets passed as 'end' argument to flush_tlb_others(), the Xen code was made to check its 'start' parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not be flushed from TLB. This patch fixed this issue. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Jan Beulich <jbeulich@suse.com> Tested-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-05Merge commit '4cb38750d49010ae72e718d46605ac9ba5a851b4' into ↵Konrad Rzeszutek Wilk
stable/for-linus-3.6 * commit '4cb38750d49010ae72e718d46605ac9ba5a851b4': (6849 commits) bcma: fix invalid PMU chip control masks [libata] pata_cmd64x: whitespace cleanup libata-acpi: fix up for acpi_pm_device_sleep_state API sata_dwc_460ex: device tree may specify dma_channel ahci, trivial: fixed coding style issues related to braces ahci_platform: add hibernation callbacks libata-eh.c: local functions should not be exposed globally libata-transport.c: local functions should not be exposed globally sata_dwc_460ex: support hardreset ata: use module_pci_driver drivers/ata/pata_pcmcia.c: adjust suspicious bit operation pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2 [libata] Prevent interface errors with Seagate FreeAgent GoFlex drivers/acpi/glue: revert accidental license-related 6b66d95895c bits libata-acpi: add missing inlines in libata.h i2c-omap: Add support for I2C_M_STOP message flag i2c: Fall back to emulated SMBus if the operation isn't supported natively i2c: Add SCCB support i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter ...
2012-09-05xen/p2m: Fix one-off error in checking the P2M tree directory.Konrad Rzeszutek Wilk
We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES inclusive) when trying to figure out whether we can re-use some of the P2M middle leafs. Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512 we would try to use the 512th entry. Fortunately for us the p2m_top_index has a check for this: BUG_ON(pfn >= MAX_P2M_PFN); which we hit and saw this: (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1.2-OVM x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff819cadeb>] (XEN) RFLAGS: 0000000000000212 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81db5000 rbx: ffffffff81db4000 rcx: 0000000000000000 (XEN) rdx: 0000000000480211 rsi: 0000000000000000 rdi: ffffffff81db4000 (XEN) rbp: ffffffff81793db8 rsp: ffffffff81793d38 r8: 0000000008000000 (XEN) r9: 4000000000000000 r10: 0000000000000000 r11: ffffffff81db7000 (XEN) r12: 0000000000000ff8 r13: ffffffff81df1ff8 r14: ffffffff81db6000 (XEN) r15: 0000000000000ff8 cr0: 000000008005003b cr4: 00000000000026f0 (XEN) cr3: 0000000661795000 cr2: 0000000000000000 Fixes-Oracle-Bug: 14570662 CC: stable@vger.kernel.org # only for v3.5 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-05powerpc: Don't use __put_user() in patch_instructionBenjamin Herrenschmidt
patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Make sure IPI handlers see data written by IPI sendersPaul Mackerras
We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Restore correct DSCR in context switchAnton Blanchard
During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Fix DSCR inheritance in copy_thread()Anton Blanchard
If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Keep thread.dscr and thread.dscr_inherit in syncAnton Blanchard
When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Update DSCR on all CPUs when writing sysfs dscr_defaultAnton Blanchard
Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/powernv: Always go into nap mode when CPU is offlinePaul Mackerras
The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Give hypervisor decrementer interrupts their own handlerPaul Mackerras
At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/vphn: Fix arch_update_cpu_topology() return valueJesse Larrew
arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-04ARM: gemini: fix the gemini buildLinus Walleij
Test-compiling obscure machines I notice that the gemini (which by the way lacks a defconfig) is broken since some time back. Adding a simple missing include makes it build again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-04Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Two regression fixes and one boot-loader compatibility fix from Simon Horman. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order
2012-09-03ARM: shmobile: armadillo800eva: enable rw rootfs mountKuninori Morimoto
armadillo800eva default boot loader is "hermit", and it's tag->u.core.flags has flag when kernel boots. Because of this, ${LINUX}/arch/arm/kernel/setup.c :: parse_tag_core() didn't remove MS_RDONLY flag from root_mountflags. Thus, the rootfs is mounted as "readonly". This patch adds "rw" kernel parameter, and enable read/write mounts for rootfs Cc: Masahiro Nakai <nakai@atmark-techno.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-02Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: fixup smsc911x id for regulator
2012-09-02Merge branch 'fixes-for-v3.6-v2' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes * 'fixes-for-v3.6-v2' of git://git.infradead.org/users/jcooper/linux: ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c
2012-08-31Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
2012-08-31Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
2012-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
2012-08-31ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.cAndrew Lunn
Linux-next has failed to compile for kirkwood since 23 August with: arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function) arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function) Add missing <linux/sizes.h> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-31ARM: shmobile: mackerel: fixup usb module orderKuninori Morimoto
renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: shmobile: armadillo800eva: fixup: sound card detection orderKuninori Morimoto
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30s390/32: Don't clobber personality flags on execHeiko Carstens
In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-30ARM: shmobile: marzen: fixup smsc911x id for regulatorKuninori Morimoto
dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-28ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMICHiroshi Doyu
Make use of the same atomic pool as DMA does, and skip a kernel page mapping which can involve sleep'able operations at allocating a kernel page table. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()Hiroshi Doyu
Support atomic allocation in __iommu_get_pages(). Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [moved __atomic_get_pages() under #ifdef CONFIG_ARM_DMA_USE_IOMMU to avoid unused fuction warning for no-IOMMU case] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: Refactor out to introduce __in_atomic_poolHiroshi Doyu
Check the given range("start", "size") is included in "atomic_pool" or not. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: dma-mapping: atomic_pool with struct page **pagesHiroshi Doyu
struct page **pages is necessary to align with non atomic path in __iommu_get_pages(). atomic_pool() has the intialized **pages instead of just *page. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: Kirkwood: increase atomic coherent pool sizeMarek Szyprowski
The default 256 KiB coherent pool may be too small for some of the Kirkwood devices, so increase it to make sure that devices will be able to allocate their buffers with GFP_ATOMIC flag. Suggested-by: Josh Coombs <josh.coombs@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-08-28ARM: DMA-Mapping: print warning when atomic coherent allocation failsMarek Szyprowski
Print a loud warning when system runs out of memory from atomic DMA coherent pool to let users notice the potential problem. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: DMA-Mapping: add function for setting coherent pool size from platform codeMarek Szyprowski
Some platforms might require to increase atomic coherent pool to make sure that their device will be able to allocate all their buffers from atomic context. This function can be also used to decrease atomic coherent pool size if coherent allocations are not used for the given sub-platform. Suggested-by: Josh Coombs <josh.coombs@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-28ARM: relax conditions required for enabling Contiguous Memory AllocatorMarek Szyprowski
Contiguous Memory Allocator requires only paging and MMU enabled not particular CPU architectures, so there is no need for strict dependency on CPU type. This enables to use CMA on some older ARM v5 systems which also might need large contiguous blocks for the multimedia processing hw modules. Reported-by: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Prabhakar Lad <prabhakar.lad@ti.com>
2012-08-28s390/smp: add missing smp_store_status() for !SMPHeiko Carstens
Fix this compile error: arch/s390/kernel/machine_kexec.c: In function ‘setup_regs’: arch/s390/kernel/machine_kexec.c:63:3: error: implicit declaration of function ‘smp_store_status’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-27Merge branch 'armadillo800eva' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'armadillo800eva' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
2012-08-27Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
Fixes for AT91 related to: - move to sparse IRQ: some drivers were forgotten - a DTS typo - the delay for removal of old at91_mci driver * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support
2012-08-27Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-08-27KVM: x86: fix KVM_GET_MSR for PV EOIMichael S. Tsirkin
KVM_GET_MSR was missing support for PV EOI, which is needed for migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-25Merge tag 'fixes-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for various ARM platforms. About half of these are for OMAP and submitted before but did not make it into v3.6-rc2." * tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path ARM: Kirkwood: fix Makefile.boot ARM: Kirkwood: Fix iconnect leds ARM: Orion: Set eth packet size csum offload limit ARM: mv78xx0: fix win_cfg_base prototype ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() ARM: mmp: fix potential NULL dereference ARM: OMAP4: Register the OPP table only for 4430 device cpufreq: OMAP: Handle missing frequency table on SMP systems ARM: OMAP4: sleep: Save the complete used register stack frame ...
2012-08-25Merge tag 'stable/for-linus-3.6-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull three xen bug-fixes from Konrad Rzeszutek Wilk: - Revert the kexec fix which caused on non-kexec shutdowns a race. - Reuse existing P2M leafs - instead of requiring to allocate a large area of bootup virtual address estate. - Fix a one-off error when adding PFNs for balloon pages. * tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M. xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID. Revert "xen PVonHVM: move shared_info to MMIO before kexec"
2012-08-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "I meant to sent that earlier but got swamped with other things, so here are some powerpc fixes for 3.6. A few regression fixes and some bug fixes that I deemed should still make it. There's a FSL update from Kumar with a bunch of defconfig updates along with a few embedded fixes. I also reverted my g5_defconfig update that I merged earlier as it was completely busted, not too sure what happened there, I'll do a new one later." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Revert "powerpc: Update g5_defconfig" powerpc/perf: Use pmc_overflow() to detect rolled back events powerpc: Fix VMX in interrupt check in POWER7 copy loops powerpc: POWER7 copy_to_user/copy_from_user patch applied twice powerpc: Fix personality handling in ppc64_personality() powerpc/dma-iommu: Fix IOMMU window check powerpc: Remove unnecessary ifdefs powerpc/kgdb: Restore current_thread_info properly powerpc/kgdb: Bail out of KGDB when we've been triggered powerpc/kgdb: Do not set kgdb_single_step on ppc powerpc/mpic_msgr: Add missing includes powerpc: Fix null pointer deref in perf hardware breakpoints powerpc: Fixup whitespace in xmon powerpc: Fix xmon dl command for new printk implementation powerpc/fsl: fix "Failed to mount /dev: No such device" errors powerpc/fsl: update defconfigs booke/wdt: some ioctls do not return values properly powerpc/p4080ds: dts - add usb controller version info and port0 powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS powerpc/fsl-pci: Only scan PCI bus if configured as a host
2012-08-25Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86 emulator: use stack size attribute to mask rsp in stack ops KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended ppc: e500_tlb memset clears nothing KVM: PPC: Add cache flush on page map KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value
2012-08-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Random fixes across the MIPS tree. The two hotspots are several bugs in the module loader and the ath79 SOC support; also noteworthy is the restructuring of the code to synchronize CPU timers across CPUs on startup; the old code recently ceased to work due to unrelated changes. All except one of these patches have sat for a significant time in linux-next for testing." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module MIPS: Malta: Delete duplicate PCI fixup. MIPS: ath79: don't hardcode the unavailability of the DSP ASE MIPS: Synchronize MIPS count one CPU at a time MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. MIPS: Fix race condition in module relocation code. MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. MIPS: MTX-1: Add udelay to mtx1_pci_idsel MIPS: ath79: select HAVE_CLK MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 MIPS: ath79: Fix number of GPIO lines for AR724[12] MIPS: Octeon: Fix broken interrupt controller code.