path: root/arch
AgeCommit message (Collapse)Author
2014-05-09arm64: topology: Provide relative power numbers for coresv3.10/topic/arm64-topologyMark Brown
Provide performance numbers to the scheduler to help it fill the cores in the system on big.LITTLE systems. With the current scheduler this may perform poorly for applications that try to do OpenMP style work over all cores but should help for more common workloads. The current 32 bit ARM implementation provides a similar estimate so this helps ensure that work to improve big.LITTLE systems on ARMv7 systems performs similarly on ARMv8 systems. The power numbers are the same as for ARMv7 since it seems that the expected differential between the big and little cores is very similar on both ARMv7 and ARMv8. In both ARMv7 and ARMv8 cases the numbers were based on the published DMIPS numbers. These numbers are just an initial and basic approximation for use with the current scheduler, it is likely that both experience with silicon and ongoing work on improving the scheduler will lead to further tuning or will tune automatically at runtime and so make the specific choice of numbers here less critical. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-09arm64: topology: Tell the scheduler about the relative power of coresMark Brown
In heterogeneous systems like big.LITTLE systems the scheduler will be able to make better use of the available cores if we provide power numbers to it indicating their relative performance. Do this by parsing the CPU nodes in the DT. This code currently has no effect as no information on the relative performance of the cores is provided. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-09arm64: topology: Add support for topology DT bindingsMark Brown
Add support for parsing the explicit topology bindings to discover the topology of the system. Since it is not currently clear how to map multi-level clusters for the scheduler all leaf clusters are presented to the scheduler at the same level. This should be enough to provide good support for current systems. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2014-05-09arm64: topology: Initialise default topology state immediatelyMark Brown
As a legacy of the way 32 bit ARM did things the topology code uses a null topology map by default and then overwrites it by mapping cores with no information to a cluster by themselves later. In order to make it simpler to reset things as part of recovering from parse failures in firmware information directly set this configuration on init. A core will always be its own sibling so there should be no risk of confusion with firmware provided information. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2014-05-09arm64: topology: Implement basic CPU topology supportMark Brown
Add basic CPU topology support to arm64, based on the existing pre-v8 code and some work done by Mark Hambleton. This patch does not implement any topology discovery support since that should be based on information from firmware, it merely implements the scaffolding for integration of topology support in the architecture. No locking of the topology data is done since it is only modified during CPU bringup with external serialisation from the SMP code. The goal is to separate the architecture hookup for providing topology information from the DT parsing in order to ease review and avoid blocking the architecture code (which will be built on by other work) with the DT code review by providing something simple and basic. Following patches will implement support for interpreting topology information from MPIDR and for parsing the DT topology bindings for ARM, similar patches will be needed for ACPI. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> [catalin.marinas@arm.com: removed CONFIG_CPU_TOPOLOGY, always on if SMP] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> (cherry picked from commit f6e763b93a6cd3411fd8df925344022719bcba62) Signed-off-by: Mark Brown <broonie@linaro.org> Conflicts: arch/arm64/kernel/Makefile
2014-05-09of: move of_get_cpu_node implementation to DT core librarySudeep KarkadaNagesha
This patch moves the generalized implementation of of_get_cpu_node from PowerPC to DT core library, thereby adding support for retrieving cpu node for a given logical cpu index on any architecture. The CPU subsystem can now use this function to assign of_node in the cpu device while registering CPUs. It is recommended to use these helper function only in pre-SMP/early initialisation stages to retrieve CPU device node pointers in logical ordering. Once the cpu devices are registered, it can be retrieved easily from cpu device of_node which avoids unnecessary parsing and matching. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> (cherry picked from commit 183912d352a242a276a7877852f107459a13aff9) Signed-off-by: Mark Brown <broonie@linaro.org> (cherry picked from commit 6e2bb9193fc2161ae2a5cfd11590aa9c0ae8a80d) Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-30powerpc/eeh: Fix fetching bus for single-dev-PEGavin Shan
While running Linux as guest on top of phyp, we possiblly have PE that includes single PCI device. However, we didn't return its PCI bus correctly and it leads to failure on recovery from EEH errors for single-dev-PE. The patch fixes the issue. Cc: <stable@vger.kernel.org> # v3.7+ Cc: Steve Best <sbest@us.ibm.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "We discovered some breakage in our "EEH" (PCI Error Handling) code while doing error injection, due to a couple of regressions. One of them is due to a patch (37f02195bee9 "powerpc/pci: fix PCI-e devices rescan issue on powerpc platform") that, in hindsight, I shouldn't have merged considering that it caused more problems than it solved. Please pull those two fixes. One for a simple EEH address cache initialization issue. The other one is a patch from Guenter that I had originally planned to put in 3.11 but which happens to also fix that other regression (a kernel oops during EEH error handling and possibly hotplug). With those two, the couple of test machines I've hammered with error injection are remaining up now. EEH appears to still fail to recover on some devices, so there is another problem that Gavin is looking into but at least it's no longer crashing the kernel." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Improve device hotplug initialization powerpc/eeh: Add eeh_dev to the cache during boot
2013-06-29ARM: dt: Only print warning, not WARN() on bad cpu map in device treeOlof Johansson
Due to recent changes and expecations of proper cpu bindings, there are now cases for many of the in-tree devicetrees where a WARN() will hit on boot due to badly formatted /cpus nodes. Downgrade this to a pr_warn() to be less alarmist, since it's not a new problem. Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN without this, the others do not. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-30powerpc/pci: Improve device hotplug initializationGuenter Roeck
Commit 37f02195b (powerpc/pci: fix PCI-e devices rescan issue on powerpc platform) fixes a problem with interrupt and DMA initialization on hot plugged devices. With this commit, interrupt and DMA initialization for hot plugged devices is handled in the pci device enable function. This approach has a couple of drawbacks. First, it creates two code paths for device initialization, one for hot plugged devices and another for devices known during the initial PCI scan. Second, the initialization code for hot plugged devices is only called when the device is enabled, ie typically in the probe function. Also, the platform specific setup code is called each time pci_enable_device() is called, not only once during device discovery, meaning it is actually called multiple times, once for devices discovered during the initial scan and again each time a driver is re-loaded. The visible result is that interrupt pins are only assigned to hot plugged devices when the device driver is loaded. Effectively this changes the PCI probe API, since pci_dev->irq and the device's dma configuration will now only be valid after pci_enable() was called at least once. A more subtle change is that platform specific PCI device setup is moved from device discovery into the driver's probe function, more specifically into the pci_enable_device() call. To fix the inconsistencies, add new function pcibios_add_device. Call pcibios_setup_device from pcibios_setup_bus_devices if device setup is not complete, and from pcibios_add_device if bus setup is complete. With this change, device setup code is moved back into device initialization, and called exactly once for both static and hot plugged devices. [ This also fixes a regression introduced by the above patch which causes dev->irq to be overwritten under some cirumstances after MSIs have been enabled for the device which leads to crashes due to the MSI core "hijacking" dev->irq to store the base MSI number and not the LSI. --BenH ] Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-28mn10300: Use early_param() to parse "mem=" parameterAkira Takeuchi
This fixes the problem that "init=" options may not be passed to kernel correctly. parse_mem_cmdline() of mn10300 arch gets rid of "mem=" string from redboot_command_line. Then init_setup() parses the "init=" options from static_command_line, which is a copy of redboot_command_line, and keeps the pointer to the init options in execute_command variable. Since the commit 026cee0 upstream (params: <level>_initcall-like kernel parameters), static_command_line becomes overwritten by saved_command_line at do_initcall_level(). Notice that saved_command_line is a command line which includes "mem=" string. As a result, execute_command may point to weird string by the length of "mem=" parameter. I noticed this problem when using the command line like this: mem=128M console=ttyS0,115200 init=/bin/sh Here is the processing flow of command line parameters. start_kernel() setup_arch(&command_line) parse_mem_cmdline(cmdline_p) * strcpy(boot_command_line, redboot_command_line); * Remove "mem=xxx" from redboot_command_line. * *cmdline_p = redboot_command_line; setup_command_line(command_line) <-- command_line is redboot_command_line * strcpy(saved_command_line, boot_command_line) * strcpy(static_command_line, command_line) parse_early_param() strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); parse_early_options(tmp_cmdline); parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param); parse_args("Booting ..", static_command_line, ...); init_setup() <-- save the pointer in execute_command rest_init() kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); At this point, execute_command points to "/bin/sh" string. kernel_init() kernel_init_freeable() do_basic_setup() do_initcalls() do_initcall_level() (*) strcpy(static_command_line, saved_command_line); Here, execute_command gets to point to "200" string !! Signed-off-by: David Howells <dhowells@redhat.com>
2013-06-28mn10300: Allow to pass array name to get_user()Akira Takeuchi
This fixes the following compile error: CC block/scsi_ioctl.o block/scsi_ioctl.c: In function 'sg_scsi_ioctl': block/scsi_ioctl.c:449: error: invalid initializer Signed-off-by: David Howells <dhowells@redhat.com>
2013-06-28powerpc/eeh: Add eeh_dev to the cache during bootThadeu Lima de Souza Cascardo
commit f8f7d63fd96ead101415a1302035137a866f8998 ("powerpc/eeh: Trace eeh device from I/O cache") broke EEH on pseries for devices that were present during boot and have not been hotplugged/DLPARed. eeh_check_failure will get the eeh_dev from the cache, and will get NULL. eeh_addr_cache_build adds the addresses to the cache, but eeh_dev for the giving pci_device is not set yet. Just reordering the call to eeh_addr_cache_insert_dev works fine. The ordering is similar to the one in eeh_add_device_late. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Three small fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot() hw_breakpoint: Fix cpu check in task_bp_pinned(cpu) kprobes: Fix arch_prepare_kprobe to handle copy insn failures
2013-06-26Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Another round of ARM fixes. Largest one is the second half of the PJ4B fix which was pushed in the previous -rc - this one was delayed because its original caused a build regression while trying to fix a regression! As ever, noMMU gets forgotten when fixing problems on MMU, so we have a noMMU fix for a previous fix included in this set. A couple of fixes from Lorenzo for problems with the ARM DT CPU code, and a one liner to remove the buggy 'wait for interrupt' with FA526 cores" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7773/1: PJ4B: Add support for errata 4742 ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU ARM: 7763/1: kernel: fix __cpu_logical_map default initialization ARM: 7762/1: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes ARM: 7760/1: cpu_fa526_do_idle: remove WFI
2013-06-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of last-minute fixes: a build regression for !SMP, a recent memory detection patch caused kdump to break, a regression in regard to sscanf vs reboot from FCP, and two fixes in the DMA mapping code for PCI" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ipl: Fix FCP WWPN and LUN format strings for read s390/mem_detect: fix memory hole handling s390/dma: support debug_dma_mapping_error s390/dma: fix mapping_error detection s390/irq: Only define synchronize_irq() on SMP
2013-06-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc bugfix from Ben Herrenschmidt: "This is a fix for a regression causing a freescale "83xx" based platforms to crash on boot due to some PCI breakage" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Fix boot panic on mpc83xx (regression)
2013-06-24powerpc/pci: Fix boot panic on mpc83xx (regression)Rojhalat Ibrahim
The following commit caused a fatal oops when booting on mpc83xx with a non-express PCI bus (regardless of whether a PCI device is present): commit 50d8f87d2b39313dae9d0a2d9b23d377328f2f7b Author: Rojhalat Ibrahim <imr@rtschenk.de> Date: Mon Apr 8 10:15:28 2013 +0200 powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> This patch fixes the issue by calling setup_indirect_pci for all device types. fsl_indirect_read_config is now only used for booke/86xx PCIe controllers. Reported-by: Michael Guntsche <mike@it-loops.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-24ARM: 7773/1: PJ4B: Add support for errata 4742Gregory CLEMENT
This commit fixes the regression on Armada 370 (the kernal hang during boot) introduced by the commit: "ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead". When coming out of either a Wait for Interrupt (WFI) or a Wait for Event (WFE) IDLE states, a specific timing sensitivity exists between the retiring WFI/WFE instructions and the newly issued subsequent instructions. This sensitivity can result in a CPU hang scenario. The workaround is to insert either a Data Synchronization Barrier (DSB) or Data Memory Barrier (DMB) command immediately after the WFI/WFE instruction. This commit was based on the work of Lior Amsalem, but heavily modified to apply the errata fix dynamically according to the processor type thanks to the suggestions of Russell King and Nicolas Pitre. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Willy Tarreau <w@1wt.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMUSimon Baatz
Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page) moved the implementation of flush_kernel_dcache_page() into mm/flush.c but did not implement it on noMMU ARM. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: <stable@vger.kernel.org> # 3.2+: 1bc3974: ARM: 7755/1 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24ARM: 7763/1: kernel: fix __cpu_logical_map default initializationLorenzo Pieralisi
The __cpu_logical_map array is statically initialized to 0, which is a valid MPIDR value. To prevent issues with the current implementation, this patch defines an MPIDR_INVALID value, and statically initializes the __cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps() tmp_map array used to stash DT reg properties while parsing DT are initialized with the MPIDR_INVALID value as well for consistency. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24ARM: 7762/1: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodesLorenzo Pieralisi
The introduction of the cpu-map topology node in the cpus node implies that cpus node might have children that are not cpu nodes. The DT parsing code needs updating otherwise it would check for cpu nodes properties in nodes that are not required to contain them, resulting in warnings that have no bearing on bindings defined in the dts source file. Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24ARM: 7760/1: cpu_fa526_do_idle: remove WFIJonas Jensen
As it was already suggested by Russell King and Arnd Bergmann: https://lkml.org/lkml/2013/5/16/133 moxart and gemini seem to be the only platforms using CPU_FA526, and instead of pointing arm_pm_idle to an empty function from platform code, it makes sense to remove WFI code from the processor specific idle function. Applies to arm-soc/for-next (and 3.10-rc1). Changes since v1: 1. remove WFI but make sure cpu_fa526_do_idle do not fall through to cpu_fa526_dcache_clean_area Note: moxart boots and prints to UART without this patch, but input is broken. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-24s390/ipl: Fix FCP WWPN and LUN format strings for readMichael Holzheu
The following git commit changed the behavior of sscanf: commit 53809751ac230a3611b5cdd375f3389f3207d471 Author: Jan Beulich <JBeulich@suse.com> Date: Mon Dec 17 16:01:31 2012 -0800 sscanf: don't ignore field widths for numeric conversions This broke the WWPN and LUN sysfs attributes for s390 reipl and dump on panic. Example: $ echo 0x0123456701234567 > /sys/firmware/reipl/fcp/wwpn $ cat /sys/firmware/reipl/fcp/wwpn 0x0001234567012345 So fix this and use format strings that work also with the new sscanf implementation: $ echo 0x012345670123456789 > /sys/firmware/reipl/fcp/wwpn $ cat /sys/firmware/reipl/fcp/wwpn 0x0123456701234567 Cc: stable@vger.kernel.org # 3.8+ Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "These are two fixes that came in this week, one for a regression we introduced in 3.10 in the GIC interrupt code, and the other one fixes a typo in newly introduced code" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
2013-06-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Several fixes for bugs caught while looking through f_pos (ab)users" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aout32 coredump compat fix splice: don't pass the address of ->f_pos to methods mconsole: we'd better initialize pos before passing it to vfs_read()...
2013-06-22aout32 coredump compat fixAl Viro
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout handles it correctly (seeks by PAGE_SIZE - sizeof(struct user), getting the current position to PAGE_SIZE), compat one seeks by PAGE_SIZE and ends up at PAGE_SIZE + already written... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-21Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This series fixes a couple of build failures, and fixes MTRR cleanup and memory setup on very specific memory maps. Finally, it fixes triggering backtraces on all CPUs, which was inadvertently disabled on x86." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix dummy variable buffer allocation x86: Fix trigger_all_cpu_backtrace() implementation x86: Fix section mismatch on load_ucode_ap x86: fix build error and kconfig for ia32_emulation and binfmt range: Do not add new blank slot with add_range_with_merge x86, mtrr: Fix original mtrr range get for mtrr_cleanup
2013-06-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Three one-line fixes for my first pull request; one for x86 host, one for x86 guest, one for PPC" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86: kvmclock: zero initialize pvclock shared memory area kvm/ppc/booke: Delay kvmppc_lazy_ee_enable KVM: x86: remove vcpu's CPL check in host-invoked XCR set
2013-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fix from Herbert Xu: "This fixes an unaligned crash in XTS mode when using aseni_intel" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni_intel - fix accessing of unaligned memory
2013-06-21Merge tag 'efi-urgent' into x86/urgentH. Peter Anvin
* Don't leak random kernel memory to EFI variable NVRAM when attempting to initiate garbage collection. Also, free the kernel memory when we're done with it instead of leaking - Ben Hutchings Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-21x86/efi: Fix dummy variable buffer allocationBen Hutchings
1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-06-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two smaller fixes - plus a context tracking tracing fix that is a bit bigger" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/context-tracking: Add preempt_schedule_context() for tracing sched: Fix clear NOHZ_BALANCE_KICK sched/x86: Construct all sibling maps if smt
2013-06-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Four fixes. The mmap ones are unfortunately larger than desired - fuzzing uncovered bugs that needed perf context life time management changes to fix properly" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP perf: Fix mmap() accounting hole perf: Fix perf mmap bugs kprobes: Fix to free gone and unused optprobes
2013-06-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu idle fixes from Thomas Gleixner: - Add a missing irq enable. Fallout of the idle conversion - Fix stackprotector wreckage caused by the idle conversion * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: idle: Enable interrupts in the weak arch_cpu_idle() implementation idle: Add the stack canary init to cpu_startup_entry()
2013-06-20Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fix fro, Benjamin Herrenschmidt: "We accidentally broke hugetlbfs on Freescale embedded processors which use a slightly different page table layout than our server processors" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix bad pmd error with book3E config
2013-06-20Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tilepro fix from Chris Metcalf: "This change allows the older tilepro architecture to be correctly built by newer gccs, despite a change that caused gcc to start trying to use an out-of-line implementation for __builtin_ffsll(). This should be inline again starting with gcc 4.7.4 and 4.8.2 or so, but meanwhile this change keeps things from breaking, with the only cost being a few bytes of code in the kernel to provide __ffsdi2 even for compilers that do inline it" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilepro: work around module link error with gcc 4.7
2013-06-20Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 perf fix from Catalin Marinas: "Perf fix (user-mode PC recording)" * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: perf: arm64: Record the user-mode PC in the call chain.
2013-06-20kprobes: Fix arch_prepare_kprobe to handle copy insn failuresMasami Hiramatsu
Fix arch_prepare_kprobe() to handle failures in copy instruction correctly. This fix is related to the previous fix: 8101376 which made __copy_instruction return an error result if failed, but caller site was not updated to handle it. Thus, this is the other half of the bugfix. This fix is also related to the following bug-report: https://bugzilla.redhat.com/show_bug.cgi?id=910649 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Jonathan Lebon <jlebon@redhat.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20130605031216.15285.2001.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20x86: Fix trigger_all_cpu_backtrace() implementationMichel Lespinasse
The following change fixes the x86 implementation of trigger_all_cpu_backtrace(), which was previously (accidentally, as far as I can tell) disabled to always return false as on architectures that do not implement this function. trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h, should call arch_trigger_all_cpu_backtrace() if available, or return false if the underlying arch doesn't implement this function. x86 did provide a suitable arch_trigger_all_cpu_backtrace() implementation, but it wasn't actually being used because it was declared in asm/nmi.h, which linux/nmi.h doesn't include. Also, linux/nmi.h couldn't easily be fixed by including asm/nmi.h, because that file is not available on all architectures. I am proposing to fix this by moving the x86 definition of arch_trigger_all_cpu_backtrace() to asm/irq.h. Tested via: echo l > /proc/sysrq-trigger Before the change, this uses a fallback implementation which shows backtraces on active CPUs (using smp_call_function_interrupt() ) After the change, this shows NMI backtraces on all CPUs Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-20perf: arm64: Record the user-mode PC in the call chain.Jed Davis
With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip, and the corresponding change in arch/arm. Signed-off-by: Jed Davis <jld@mozilla.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-20powerpc: Fix bad pmd error with book3E configAneesh Kumar K.V
Book3E uses the hugepd at PMD level and don't encode pte directly at the pmd level. So it will find the lower bits of pmd set and the pmd_bad check throws error. Infact the current code will never take the free_hugepd_range call at all because it will clear the pmd if it find a hugepd pointer. Fix this by clearing bad pmd only if it is not a hugepd pointer. This is regression introduced by e2b3d202d1dba8f3546ed28224ce485bc50010be "powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format" Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-19x86: Fix section mismatch on load_ucode_apPaul Gortmaker
We are in the process of removing all the __cpuinit annotations. While working on making that change, an existing problem was made evident: WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch in reference from the function cpu_init() to the function .init.text:load_ucode_ap() The function cpu_init() references the function __init load_ucode_ap(). This is often because cpu_init lacks a __init annotation or the annotation of load_ucode_ap is wrong. This now appears because in my working tree, cpu_init() is no longer tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd hypothesis from the audit is the correct one, as there was an incorrect __init tag on the prototype in the header (but __cpuinit was used on the function itself.) The audit is telling us that the prototype's __init annotation took effect and the function did land in the .init.text section. Checking with objdump on a mainline tree that still has __cpuinit shows that the __cpuinit on the function takes precedence over the __init on the prototype, but that won't be true once we make __cpuinit a no-op. Even though we are removing __cpuinit, we temporarily align both the function and the prototype on __cpuinit so that the changeset can be applied to stable trees if desired. [ hpa: build fix only, no object code change ] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable <stable@vger.kernel.org> # 3.9+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-19mn10300: Fix include dependency in irqflags.h et al.David Daney
We need to pick up the definition of raw_smp_processor_id() from asm/smp.h. For the !SMP case, we need to supply a definition of raw_smp_processor_id(). Because of the include dependencies we cannot use smp_call_func_t in asm/smp.h, but we do need linux/thread_info.h Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Various sparc bug fixes, in particular: 1) TSB hashes have to be flushed before TLB on sparc64, from Dave Kleikamp. 2) LEON timer interrupts can get stuck, from Andreas Larsson. 3) Sparc64 needs to handle lack of address-congruence devicetree property, from Bob Picco" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: tsb must be flushed before tlb sparc,leon: Convert to use devm_ioremap_resource sparc64 address-congruence property sparc32, leon: Enable interrupts before going idle to avoid getting stuck sparc32, leon: Remove separate "ticker" timer for SMP sparc: kernel: using strlcpy() instead of strcpy() arch: sparc: prom: looping issue, need additional length check in the outside looping sparc: remove inline marking of EXPORT_SYMBOL functions sparc: Switch to asm-generic/linkage.h
2013-06-19Merge branch 'parisc-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "This contains a kernel segfault fix when reading /proc/kpageflags or /proc/kpagecount, two fixes for the serial port and PCI graphic card support on C8000 workstations and a fix to use unshadowed registers for flushing D- and I-caches." * 'parisc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm parisc: provide pci_mmap_page_range() for parisc parisc: fix serial ports on C8000 workstation parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2)
2013-06-19metag: fix mm/hugetlb.c build breakageJames Hogan
Commit 106c992a5ebe ("mm/hugetlb: add more arch-defined huge_pte functions") added an include of <asm-generic/hugetlb.h> to each architecture's <asm/hugetlb.h> (except s390). Unfortunately metag was missed which resulted in build errors when hugetlbfs is enabled (see below). Add the include for metag too to fix the build errors: mm/hugetlb.c In function 'make_huge_pte': mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite' mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty' ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-19Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "The larger changes this time are - "ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page" which fixes more data corruption problems with O_DIRECT - "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" which gets us back to working shutdown/reboot on SMP platforms - "ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect" which fixes a shutdown regression found in v3.10 on Versatile Express platforms. The remainder are the quite small, maybe one or two line changes" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7759/1: decouple CPU offlining from reboot/shutdown ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B ARM: 7753/1: map_init_section flushes incorrect pmd ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect
2013-06-19s390/mem_detect: fix memory hole handlingHeiko Carstens
With git commit 996b4a7d "s390/mem_detect: remove artificial kdump memory types" the memory detection code got simplified. As a side effect the array that describes memory chunks may now contain empty (zeroed) entries. All call sites can handle this except for drivers/s390/char/zcore.c::zcore_memmap_open which has a really odd user space interface. The easiest fix is to change the memory hole handling code, so that no empty entries exist before the last valid entry is reached. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-19perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EPStephane Eranian
This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP. For some reason, the LDLAT extra reg definition for snb_ep showed up as duplicate in the snb table. This patch moves the definition of LDLAT back into the snb_ep table. Thanks to Don Zickus for tracking this one down. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130607212210.GA11849@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>