path: root/arch/xtensa
AgeCommit message (Collapse)Author
2015-11-10Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie
2015-11-09Merge tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull xtensa updates from Chris Zankel: - fix remaining issues with noMMU cores - fix build for cores w/o cache or zero overhead loop options - fix boot of secondary cores in SMP configuration - add support for DMA to high memory pages - add dma_to_phys and phys_to_dma functions. * tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux: xtensa: implement dma_to_phys and phys_to_dma xtensa: support DMA to high memory Revert "xtensa: cache inquiry and unaligned cache handling functions" xtensa: drop unused sections and remapped reset handlers xtensa: fix secondary core boot in SMP xtensa: add FORCE_MAX_ZONEORDER to Kconfig xtensa: nommu: provide defconfig for de212 on kc705 xtensa: nommu: xtfpga: add kc705 DTS xtensa: add de212 core variant xtensa: nommu: select HAVE_FUTEX_CMPXCHG xtensa: nommu: fix default memory start address xtensa: nommu: provide correct KIO addresses xtensa: nommu: fix USER_RING definition xtensa: xtfpga: fix integer overflow in TASK_SIZE xtensa: fix build for configs without cache options xtensa: fixes for configs without loop option
2015-11-09xtensa: implement dma_to_phys and phys_to_dmaMax Filippov
This fixes the following build error seen in -next: drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c:143:2: error: implicit declaration of function 'dma_to_phys' Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-09xtensa: support DMA to high memoryMax Filippov
- don't bugcheck if high memory page is passed to xtensa_map_page; - turn empty dcache flush macros into functions so that they could be passed as function parameters; - use kmap_atomic to map high memory pages for cache invalidation/ flushing performed by xtensa_sync_single_for_{cpu,device}. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-06mm: make compound_head() robustKirill A. Shutemov
Hugh has pointed that compound_head() call can be unsafe in some context. There's one example: CPU0 CPU1 isolate_migratepages_block() page_count() compound_head() !!PageTail() == true put_page() tail->first_page = NULL head = tail->first_page alloc_pages(__GFP_COMP) prep_compound_page() tail->first_page = head __SetPageTail(p); !!PageTail() == true <head == NULL dereferencing> The race is pure theoretical. I don't it's possible to trigger it in practice. But who knows. We can fix the race by changing how encode PageTail() and compound_head() within struct page to be able to update them in one shot. The patch introduces page->compound_head into third double word block in front of compound_dtor and compound_order. Bit 0 encodes PageTail() and the rest bits are pointer to head page if bit zero is set. The patch moves page->pmd_huge_pte out of word, just in case if an architecture defines pgtable_t into something what can have the bit 0 set. hugetlb_cgroup uses page->lru.next in the second tail page to store pointer struct hugetlb_cgroup. The patch switch it to use page->private in the second tail page instead. The space is free since ->first_page is removed from the union. The patch also opens possibility to remove HUGETLB_CGROUP_MIN_ORDER limitation, since there's now space in first tail page to store struct hugetlb_cgroup pointer. But that's out of scope of the patch. That means page->compound_head shares storage space with: - page->lru.next; - page->next; - page->rcu_head.next; That's too long list to be absolutely sure, but looks like nobody uses bit 0 of the word. page->rcu_head.next guaranteed[1] to have bit 0 clean as long as we use call_rcu(), call_rcu_bh(), call_rcu_sched(), or call_srcu(). But future call_rcu_lazy() is not allowed as it makes use of the bit and we can get false positive PageTail(). [1] http://lkml.kernel.org/g/20150827163634.GD4029@linux.vnet.ibm.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge tag 'devicetree-for-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A fairly large (by DT standards) pull request this time with the majority being some overdue moving DT binding docs around to consolidate similar bindings. - DT binding doc consolidation moving similar bindings to common locations. The majority of these are display related which were scattered in video/, fb/, drm/, gpu/, and panel/ directories. - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs in the tree for most arches with dts files (except powerpc for now). - OF_IRQ=n fixes for user enabled CONFIG_OF. - of_node_put ref counting fixes from Julia Lawall. - Common DT binding for wakeup-source and deprecation of all similar bindings. - DT binding for PXA LCD controller. - Allow ignoring failed PCI resource translations in order to ignore 64-bit addresses on non-LPAE 32-bit kernels. - Support setting the NUMA node from DT instead of only from parent device. - Couple of earlycon DT parsing fixes for address and options" * tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) MAINTAINERS: update DT binding doc locations devicetree: add Sigma Designs vendor prefix of: simplify arch_find_n_match_cpu_physical_id() function Documentation: arm: Fixed typo in socfpga fpga mgr example Documentation: devicetree: fix reference to legacy wakeup properties Documentation: devicetree: standardize/consolidate on "wakeup-source" property drivers: of: removing assignment of 0 to static variable xtensa: enable building of all dtbs mips: enable building of all dtbs metag: enable building of all dtbs metag: use common make variables for dtb builds h8300: enable building of all dtbs arm64: enable building of all dtbs arm: enable building of all dtbs arc: enable building of all dtbs arc: use common make variables for dtb builds of: add config option to enable building of all dtbs of/fdt: fix error checking for earlycon address of/overlay: add missing of_node_put of/platform: add missing of_node_put ...
2015-11-05mm: mlock: add mlock flags to enable VM_LOCKONFAULT usageEric B Munson
The previous patch introduced a flag that specified pages in a VMA should be placed on the unevictable LRU, but they should not be made present when the area is created. This patch adds the ability to set this state via the new mlock system calls. We add MLOCK_ONFAULT for mlock2 and MCL_ONFAULT for mlockall. MLOCK_ONFAULT will set the VM_LOCKONFAULT modifier for VM_LOCKED. MCL_ONFAULT should be used as a modifier to the two other mlockall flags. When used with MCL_CURRENT, all current mappings will be marked with VM_LOCKED | VM_LOCKONFAULT. When used with MCL_FUTURE, the mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT. When used with both MCL_CURRENT and MCL_FUTURE, all current mappings and mm->def_flags will be marked with VM_LOCKED | VM_LOCKONFAULT. Prior to this patch, mlockall() will unconditionally clear the mm->def_flags any time it is called without MCL_FUTURE. This behavior is maintained after adding MCL_ONFAULT. If a call to mlockall(MCL_FUTURE) is followed by mlockall(MCL_CURRENT), the mm->def_flags will be cleared and new VMAs will be unlocked. This remains true with or without MCL_ONFAULT in either mlockall() invocation. munlock() will unconditionally clear both vma flags. munlockall() unconditionally clears for VMA flags on all VMAs and in the mm->def_flags field. Signed-off-by: Eric B Munson <emunson@akamai.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-03Revert "xtensa: cache inquiry and unaligned cache handling functions"Max Filippov
Drop unaligned dcache management functions as they are no longer used. This reverts commit bd974240c9a7 ("xtensa: cache inquiry and unaligned cache handling functions"). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-03xtensa: drop unused sections and remapped reset handlersMax Filippov
There are no .bootstrap or .ResetVector.text sections linked to the vmlinux image, drop these sections from vmlinux.ld.S. Drop RESET_VECTOR_VADDR definition only used for .ResetVector.text. Drop remapped copies of primary and secondary reset vectors, as modern gdb don't have problems stepping through instructions at arbitrary locations. Drop corresponding sections from the corresponding linker scripts. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-03xtensa: fix secondary core boot in SMPMax Filippov
There are multiple factors adding to the issue in different configurations: - commit 17290231df16eeee ("xtensa: add fixup for double exception raised in window overflow") added function window_overflow_restore_a0_fixup to double exception vector overlapping reset vector location of secondary processor cores. - on MMUv2 cores RESET_VECTOR1_VADDR may point to uncached kernel memory making code overlapping depend on cache type and size, so that without cache or with WT cache reset vector code overwrites double exception code, making issue even harder to detect. - on MMUv3 cores RESET_VECTOR1_VADDR may point to unmapped area, as MMUv3 cores change virtual address map to match MMUv2 layout, but reset vector virtual address is given for the original MMUv3 mapping. - physical memory region of the secondary reset vector is not reserved in the physical memory map, and thus may be allocated and overwritten at arbitrary moment. Fix it as follows: - move window_overflow_restore_a0_fixup code to .text section. - define RESET_VECTOR1_VADDR so that it points to reset vector in the cacheable MMUv2 map for cores with MMU. - reserve reset vector region in the physical memory map. Drop separate literal section and build mxhead.S with text section literals. Cc: <stable@vger.kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-03xtensa: add FORCE_MAX_ZONEORDER to KconfigMax Filippov
Make maximal memory allocation order configurable, so that drivers could allocate huge buffers when they need to. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: provide defconfig for de212 on kc705Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: xtfpga: add kc705 DTSMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: add de212 core variantMax Filippov
Diamond core 212 is a generic purpose core without full MMU used for sample noMMU configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: select HAVE_FUTEX_CMPXCHGMax Filippov
Not having HAVE_FUTEX_CMPXCHG makes futex_detect_cmpxchg probe cmpxchg_futex_value_locked with NULL address. It's not guaranteed to fault without MMU, instead it locks up on Xtensa when there's no RAM at address 0. Select HAVE_FUTEX_CMPXCHG in noMMU Xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: fix default memory start addressMax Filippov
RAM starts at 0x60000000 on noMMU cores, not at 0x40000000. Fix the default. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: provide correct KIO addressesMax Filippov
KIO region location is different for noMMU cores. Provide different default physical address and make KIO virtual address equal to physical. Move xtensa_get_kio_paddr function close to XCHAL_KIO_PADDR definition and define it not only for MMUv3, but for all MMU options except MMUv2. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: nommu: fix USER_RING definitionMax Filippov
There's no kernel/user separation in noMMU and PS.RING may not exist. Even if it exists it should not be used because TLB entries are not set up for user ring on user pages. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: xtfpga: fix integer overflow in TASK_SIZEMax Filippov
This fixes the following warning when default memory region crosses 0x80000000: arch/xtensa/include/asm/processor.h:40:47: warning: integer overflow in expression [-Woverflow] #define TASK_SIZE (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE) ^ Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: fix build for configs without cache optionsMax Filippov
- make cache-related assembly macros empty if core doesn't have corresponding cache type; - don't initialize cache attributes in instruction/data TLB entries if there's no corresponding cache type. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-11-02xtensa: fixes for configs without loop optionMax Filippov
Build-time fixes: - make lbeg/lend/lcount save/restore conditional on kernel entry; - don't clear lcount in platform_restart functions unconditionally. Run-time fixes: - use correct end of range register in __endla paired with __loopt, not the unused temporary register. This fixes .bss zero-initialization. Update comments in asmmacro.h; - don't clobber a10 in the usercopy that leads to access to unmapped memory. Cc: <stable@vger.kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-10-27xtensa: enable building of all dtbsRob Herring
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org
2015-10-25Merge branch 'acpi-init'Rafael J. Wysocki
* acpi-init: clocksource: cosmetic: Drop OF 'dependency' from symbols clocksource / arm_arch_timer: Convert to ACPI probing clocksource: Add new CLKSRC_{PROBE,ACPI} config symbols clocksource / ACPI: Add probing infrastructure for ACPI-based clocksources irqchip / GIC: Convert the GIC driver to ACPI probing irqchip / ACPI: Add probing infrastructure for ACPI-based irqchips ACPI: Add early device probing infrastructure
2015-10-06Merge tag 'v4.3-rc4' into locking/core, to pick up fixes before applying new ↵Ingo Molnar
changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-04Merge branch 'strscpy' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures
2015-10-01clocksource: cosmetic: Drop OF 'dependency' from symbolsMarc Zyngier
Seeing the 'of' characters in a symbol that is being called from ACPI seems to freak out people. So let's do a bit of pointless renaming so that these folks do feel at home. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-23atomic, arch: Audit atomic_{read,set}()Peter Zijlstra
This patch makes sure that atomic_{read,set}() are at least {READ,WRITE}_ONCE(). We already had the 'requirement' that atomic_read() should use ACCESS_ONCE(), and most archs had this, but a few were lacking. All are now converted to use READ_ONCE(). And, by a symmetry and general paranoia argument, upgrade atomic_set() to use WRITE_ONCE(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: james.hogan@imgtec.com Cc: linux-kernel@vger.kernel.org Cc: oleg@redhat.com Cc: will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-15PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas
Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-10dma-mapping: consolidate dma_set_maskChristoph Hellwig
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_supportedChristoph Hellwig
Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: cosolidate dma_mapping_errorChristoph Hellwig
Currently there are three valid implementations of dma_mapping_error: (1) call ->mapping_error (2) check for a hardcoded error code (3) always return 0 This patch provides a common implementation that calls ->mapping_error if present, then checks for DMA_ERROR_CODE if defined or otherwise returns 0. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_{alloc,free}_noncoherentChristoph Hellwig
Most architectures do not support non-coherent allocations and either define dma_{alloc,free}_noncoherent to their coherent versions or stub them out. Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips implements them directly. This patch moves the Openrisc version to common code, and handles the DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance. Note that actual non-coherent allocations require a dma_cache_sync implementation, so if non-coherent allocations didn't work on an architecture before this patch they still won't work after it. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}Christoph Hellwig
Since 2009 we have a nice asm-generic header implementing lots of DMA API functions for architectures using struct dma_map_ops, but unfortunately it's still missing a lot of APIs that all architectures still have to duplicate. This series consolidates the remaining functions, although we still need arch opt outs for two of them as a few architectures have very non-standard implementations. This patch (of 5): The coherent DMA allocator works the same over all architectures supporting dma_map operations. This patch consolidates them and converges the minor differences: - the debug_dma helpers are now called from all architectures, including those that were previously missing them - dma_alloc_from_coherent and dma_release_from_coherent are now always called from the generic alloc/free routines instead of the ops dma-mapping-common.h always includes dma-coherent.h to get the defintions for them, or the stubs if the architecture doesn't support this feature - checks for ->alloc / ->free presence are removed. There is only one magic instead of dma_map_ops without them (mic_dma_ops) and that one is x86 only anyway. Besides that only x86 needs special treatment to replace a default devices if none is passed and tweak the gfp_flags. An optional arch hook is provided for that. [linux@roeck-us.net: fix build] [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and atomic updates from Ingo Molnar: "Main changes in this cycle are: - Extend atomic primitives with coherent logic op primitives (atomic_{or,and,xor}()) and deprecate the old partial APIs (atomic_{set,clear}_mask()) The old ops were incoherent with incompatible signatures across architectures and with incomplete support. Now every architecture supports the primitives consistently (by Peter Zijlstra) - Generic support for 'relaxed atomics': - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return() - atomic_read_acquire() - atomic_set_release() This came out of porting qwrlock code to arm64 (by Will Deacon) - Clean up the fragile static_key APIs that were causing repeat bugs, by introducing a new one: DEFINE_STATIC_KEY_TRUE(name); DEFINE_STATIC_KEY_FALSE(name); which define a key of different types with an initial true/false value. Then allow: static_branch_likely() static_branch_unlikely() to take a key of either type and emit the right instruction for the case. To be able to know the 'type' of the static key we encode it in the jump entry (by Peter Zijlstra) - Static key self-tests (by Jason Baron) - qrwlock optimizations (by Waiman Long) - small futex enhancements (by Davidlohr Bueso) - ... and misc other changes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) jump_label/x86: Work around asm build bug on older/backported GCCs locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics locking/qrwlock: Implement queue_write_unlock() using smp_store_release() locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t' locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic locking/static_keys: Make verify_keys() static jump label, locking/static_keys: Update docs locking/static_keys: Provide a selftest jump_label: Provide a self-test s390/uaccess, locking/static_keys: employ static_branch_likely() x86, tsc, locking/static_keys: Employ static_branch_likely() locking/static_keys: Add selftest locking/static_keys: Add a new static_key interface locking/static_keys: Rework update logic locking/static_keys: Add static_key_{en,dis}able() helpers ...
2015-09-02Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "This first core part of the block IO changes contains: - Cleanup of the bio IO error signaling from Christoph. We used to rely on the uptodate bit and passing around of an error, now we store the error in the bio itself. - Improvement of the above from myself, by shrinking the bio size down again to fit in two cachelines on x86-64. - Revert of the max_hw_sectors cap removal from a revision again, from Jeff Moyer. This caused performance regressions in various tests. Reinstate the limit, bump it to a more reasonable size instead. - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me. Most devices have huge trim limits, which can cause nasty latencies when deleting files. Enable the admin to configure the size down. We will look into having a more sane default instead of UINT_MAX sectors. - Improvement of the SGP gaps logic from Keith Busch. - Enable the block core to handle arbitrarily sized bios, which enables a nice simplification of bio_add_page() (which is an IO hot path). From Kent. - Improvements to the partition io stats accounting, making it faster. From Ming Lei. - Also from Ming Lei, a basic fixup for overflow of the sysfs pending file in blk-mq, as well as a fix for a blk-mq timeout race condition. - Ming Lin has been carrying Kents above mentioned patches forward for a while, and testing them. Ming also did a few fixes around that. - Sasha Levin found and fixed a use-after-free problem introduced by the bio->bi_error changes from Christoph. - Small blk cgroup cleanup from Viresh Kumar" * 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits) blk: Fix bio_io_vec index when checking bvec gaps block: Replace SG_GAPS with new queue limits mask block: bump BLK_DEF_MAX_SECTORS to 2560 Revert "block: remove artifical max_hw_sectors cap" blk-mq: fix race between timeout and freeing request blk-mq: fix buffer overflow when reading sysfs file of 'pending' Documentation: update notes in biovecs about arbitrarily sized bios block: remove bio_get_nr_vecs() fs: use helper bio_add_page() instead of open coding on bi_io_vec block: kill merge_bvec_fn() completely md/raid5: get rid of bio_fits_rdev() md/raid5: split bio for chunk_aligned_read block: remove split code in blkdev_issue_{discard,write_same} btrfs: remove bio splitting and merge_bvec_fn() calls bcache: remove driver private bio splitting code block: simplify bio_add_page() block: make generic_make_request handle arbitrarily sized bios blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL) block: don't access bio->bi_error after bio_put() block: shrink struct bio down to 2 cache lines again ...
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-09-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Rather large, but nothing exiting: - new range check for settimeofday() to prevent that boot time becomes negative. - fix for file time rounding - a few simplifications of the hrtimer code - fix for the proc/timerlist code so the output of clock realtime timers is accurate - more y2038 work - tree wide conversion of clockevent drivers to the new callbacks" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits) hrtimer: Handle failure of tick_init_highres() gracefully hrtimer: Unconfuse switch_hrtimer_base() a bit hrtimer: Simplify get_target_base() by returning current base hrtimer: Drop return code of hrtimer_switch_to_hres() time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64() time: Introduce current_kernel_time64() time: Introduce struct itimerspec64 time: Add the common weak version of update_persistent_clock() time: Always make sure wall_to_monotonic isn't positive time: Fix nanosecond file time rounding in timespec_trunc() timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers cris/time: Migrate to new 'set-state' interface kernel: broadcast-hrtimer: Migrate to new 'set-state' interface xtensa/time: Migrate to new 'set-state' interface unicore/time: Migrate to new 'set-state' interface um/time: Migrate to new 'set-state' interface sparc/time: Migrate to new 'set-state' interface sh/localtimer: Migrate to new 'set-state' interface score/time: Migrate to new 'set-state' interface s390/time: Migrate to new 'set-state' interface ...
2015-08-31Merge tag 'pci-v4.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.3 merge window: Enumeration: - Allocate ATS struct during enumeration (Bjorn Helgaas) - Embed ATS info directly into struct pci_dev (Bjorn Helgaas) - Reduce size of ATS structure elements (Bjorn Helgaas) - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas) - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas) - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas) - Set MPS to match upstream bridge (Keith Busch) - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri) - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi) - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi) Resource management: - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi) PCI device hotplug: - pciehp: Remove unused interrupt events (Bjorn Helgaas) - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas) - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson) - pciehp: Simplify pcie_poll_cmd() (Yijing Wang) - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang) - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang) - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang) Power management: - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui) Virtualization: - Add ACS quirks for Intel I219-LM/V (Alex Williamson) - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck) MSI: - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu) - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu) - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu) - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi) - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi) Generic host bridge driver: - Remove dependency on ARM-specific struct hw_pci (Jayachandran C) - Build setup-irq.o for arm64 (Jayachandran C) - Add arm64 support (Jayachandran C) APM X-Gene host bridge driver: - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang) - Add support for a 64-bit prefetchable memory window (Duc Dang) - Drop owner assignment from platform_driver (Krzysztof Kozlowski) Broadcom iProc host bridge driver: - Allow BCMA bus driver to be built as module (Hauke Mehrtens) - Delete unnecessary checks before phy calls (Markus Elfring) - Add arm64 support (Ray Jui) Synopsys DesignWare host bridge driver: - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri) TI DRA7xx host bridge driver: - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I) - Add PM support (Kishon Vijay Abraham I) - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I) - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I) Xilinx AXI host bridge driver: - Check for MSI interrupt flag before handling as INTx (Russell Joyce) Miscellaneous: - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa) - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas) - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas) - Fix TI816X class code quirk (Bjorn Helgaas) - Remove unused "pci_probe" flags (Bjorn Helgaas) - Host bridge driver code simplifications (Fabio Estevam) - Add dev_flags bit to access VPD through function 0 (Mark Rustad) - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad) - Kill off set_irq_flags() usage (Rob Herring) - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar) - Clean up pci_find_capability() (Wei Yang)" * tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits) PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci PCI: imx6: Simplify a trivial if-return sequence PCI: spear: Use BUG_ON() instead of condition followed by BUG() PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE() PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand ...
2015-08-29Merge tag 'v4.2' into for_nextChris Zankel
Linux 4.2
2015-08-20xtensa: improve vmlinux.lds.S sed post-processingMax Filippov
Current sed script makes assumptions about the structure of rules that group .text sections in the vmlinux linker script. These assumptions get broken occasionally, e.g.: 779c88c94c34 "ARM: 8321/1: asm-generic: introduce.text.fixup input section", or 9bebe9e5b0f3 "kbuild: Fix .text.unlikely placement". Rewrite sed rules so that they don't depend on number/arrangement of text sections in *(...) blocks. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: drop unused irq_err_countMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: implement fake NMIMax Filippov
In case perf IRQ is the highest of the medium-level IRQs, and is alone on its level, it may be treated as NMI: - LOCKLEVEL is defined to be one level less than EXCM level, - IRQ masking never lowers current IRQ level, - new fake exception cause code, EXCCAUSE_MAPPED_NMI is assigned to that IRQ; new second level exception handler, do_nmi, assigned to it handles it as NMI, - atomic operations in configurations without s32c1i still need to mask all interrupts. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: don't touch EXC_TABLE_FIXUP in _switch_toMax Filippov
There's no way _switch_to can produce double exceptions now, don't enter/leave EXC_TABLE_FIXUP critical section. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: fix kernel register spillingMax Filippov
call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: reorganize irq flags tracingMax Filippov
entry.s only disables IRQs on hardware IRQ, move trace_hardirqs_off call into do_interrupt. Check actual intlevel that will be restored on return from exception handler to decide if trace_hardirqs_on should be called. Annotate IRQ on/off points in the TIF_* handling loop on return from exception handler. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-08-17xtensa: implement counting and sampling perf eventsMax Filippov
Xtensa Performance Monitor Module has up to 8 32 bit wide performance counters. Each counter may be enabled independently and can count any single type of hardware performance events. Event counting may be enabled and disabled globally (per PMM). Each counter has status register with bits indicating if the counter has been overflown and may be programmed to raise profiling IRQ on overflow. This IRQ is used to rewind counters and allow for counting more than 2^32 samples for counting events and to report samples for sampling events. For more details see Tensilica Debug User's Guide, chapter 8 "Performance monitor module". Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>