path: root/arch/s390/mm
AgeCommit message (Collapse)Author
2011-07-24[S390] kvm guest address space mappingMartin Schwidefsky
Add code that allows KVM to control the virtual memory layout that is seen by a guest. The guest address space uses a second page table that shares the last level pte-tables with the process page table. If a page is unmapped from the process page table it is automatically unmapped from the guest page table as well. The guest address space mapping starts out empty, KVM can map any individual 1MB segments from the process virtual memory to any 1MB aligned location in the guest virtual memory. If a target segment in the process virtual memory does not exist or is unmapped while a guest mapping exists the desired target address is stored as an invalid segment table entry in the guest page table. The population of the guest page table is fault driven. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-01perf: Remove the nmi parameter from the swevent and overflow interfacePeter Zijlstra
The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Will Deacon <will.deacon@arm.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-06[S390] use generic RCU page-table freeing codeMartin Schwidefsky
Replace the s390 specific rcu page-table freeing code with the generic variant. This requires to duplicate the definition for the struct mmu_table_batch as s390 does not use the generic tlb flush code. While we are at it remove the restriction that page table fragments can not be reused after a single fragment has been freed with rcu and split out allocation and freeing of page tables with pgstes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-29[S390] mm: fix mmu_gather reworkHeiko Carstens
Quite a few functions that get called from the tlb gather code require that preemption must be disabled. So disable preemption inside of the called functions instead. The only drawback is that rcu_table_freelist_finish() doesn't get necessarily called on the cpu(s) that filled the free lists. So we may see a delay, until we finally see an rcu callback. However over time this shouldn't matter. So we get rid of lots of "BUG: using smp_processor_id() in preemptible" messages. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-05-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits) perf: Fix SIGIO handling perf top: Don't stop if no kernel symtab is found perf top: Handle kptr_restrict perf top: Remove unused macro perf events: initialize fd array to -1 instead of 0 perf tools: Make sure kptr_restrict warnings fit 80 col terms perf tools: Fix build on older systems perf symbols: Handle /proc/sys/kernel/kptr_restrict perf: Remove duplicate headers ftrace: Add internal recursive checks tracing: Update btrfs's tracepoints to use u64 interface tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine ftrace: Set ops->flag to enabled even on static function tracing tracing: Have event with function tracer check error return ftrace: Have ftrace_startup() return failure code jump_label: Check entries limit in __jump_label_update ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM scripts/tags.sh: Add magic for trace-events for etags too scripts/tags.sh: Fix ctags for DEFINE_EVENT() x86/ftrace: Fix compiler warning in ftrace.c ...
2011-05-27Merge branch 'tip/perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2011-05-26[S390] mm: add ZONE_DMA to 31-bit config againHeiko Carstens
Add ZONE_DMA to 31-bit config again. The performance gain is minimal and hardly anybody cares anymore about a 31-bit kernel. So add ZONE_DMA again to help with SLAB_CACHE_DMA removal for !CONFIG_ZONE_DMA configurations. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-05-26[S390] mm: add page fault retry handlingHeiko Carstens
s390 arch backend for d065bd81 "mm: retry page fault when blocking on disk transfer". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-05-26[S390] mm: handle kernel caused page fault oom situationsHeiko Carstens
If e.g. copy_from_user() generates a page fault and the kernel runs into an OOM situation the system might lock up. If the OOM killer sends a SIG_KILL to the current process it can't handle it since it is stuck in a copy_from_user() - page fault loop. Fix this by adding the same fix as other architectures have. E.g. the x86 variant f86268 "x86/mm: Handle mm_fault_error() in kernel space" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-05-26[S390] irq: merge irq.c and s390_ext.cHeiko Carstens
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: fix service signal external interrupt handlingHeiko Carstens
Interrupt sources like pfault, sclp, dasd_diag and virtio all use the service signal external interrupt subclass mask in control register 0 to enable and disable the corresponding interrupt. Because no reference counting is implemented each subsystem thinks it is the only user of subclass and sets and clears the bit like it wants. This leads to case that unloading the dasd diag module under z/VM causes both sclp and pfault interrupts to be masked. The result will be locked up system sooner or later. Fix this by introducing a new way to set (register) and clear (unregister) the service signal subclass mask bit in cr0. Also convert all drivers. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] pfault: always enable service signal interruptHeiko Carstens
Always enable the service signal subclass mask bit in cr0, if pfault is available. That way we use the normal cpu hotplug way to propagate the subclass mask bit in cr0 instead of open coding it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-25maccess,probe_kernel: Make write/read src const void *Steven Rostedt
The functions probe_kernel_write() and probe_kernel_read() do not modify the src pointer. Allow const pointers to be passed in without the need of a typecast. Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1305824936.1465.4.camel@gandalf.stny.rr.com
2011-05-25mm: now that all old mmu_gather code is gone, remove the storagePeter Zijlstra
Fold all the mmu_gather rework patches into one for submission Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23[S390] refactor page table functions for better pgste supportMartin Schwidefsky
Rework the architecture page table functions to access the bits in the page table extension array (pgste). There are a number of changes: 1) Fix missing pgste update if the attach_count for the mm is <= 1. 2) For every operation that affects the invalid bit in the pte or the rcp byte in the pgste the pcl lock needs to be acquired. The function pgste_get_lock gets the pcl lock and returns the current pgste value for a pte pointer. The function pgste_set_unlock stores the pgste and releases the lock. Between these two calls the bits in the pgste can be shuffled. 3) Define two software bits in the pte _PAGE_SWR and _PAGE_SWC to avoid calling SetPageDirty and SetPageReferenced from pgtable.h. If the host reference backup bit or the host change backup bit has been set the dirty/referenced state is transfered to the pte. The common code will pick up the state from the pte. 4) Add ptep_modify_prot_start and ptep_modify_prot_commit for mprotect. 5) Remove pgd_populate_kernel, pud_populate_kernel, pmd_populate_kernel pgd_clear_kernel, pud_clear_kernel, pmd_clear_kernel and ptep_invalidate. 6) Rename kvm_s390_test_and_clear_page_dirty to ptep_test_and_clear_user_dirty and add ptep_test_and_clear_user_young. 7) Define mm_exclusive() and mm_has_pgste() helper to improve readability. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] pfault: cleanup codeHeiko Carstens
Small code cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] pfault: cpu hotplug vs missing completion interruptsHeiko Carstens
On cpu hot remove a PFAULT CANCEL command is sent to the hypervisor which in turn will cancel all outstanding pfault requests that have been issued on that cpu (the same happens with a SIGP cpu reset). The result is that we end up with uninterruptible processes where the interrupt that would wake up these processes never arrives. In order to solve this all processes which wait for a pfault completion interrupt get woken up after a cpu hot remove. The worst case that could happen is that they fault again and in turn need to wait again. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] extmem: get rid of compile warningHeiko Carstens
Get rid of these: arch/s390/mm/extmem.c: In function 'segment_modify_shared': arch/s390/mm/extmem.c:622:3: warning: 'end_addr' may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/extmem.c:627:18: warning: 'start_addr' may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/extmem.c: In function 'segment_load': arch/s390/mm/extmem.c:481:11: warning: 'end_addr' may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/extmem.c:480:18: warning: 'start_addr' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] get rid of unused variablesHeiko Carstens
Remove trivially unused variables as detected with -Wunused-but-set-variable. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] Remove data execution protectionMartin Schwidefsky
The noexec support on s390 does not rely on a bit in the page table entry but utilizes the secondary space mode to distinguish between memory accesses for instructions vs. data. The noexec code relies on the assumption that the cpu will always use the secondary space page table for data accesses while it is running in the secondary space mode. Up to the z9-109 class machines this has been the case. Unfortunately this is not true anymore with z10 and later machines. The load-relative-long instructions lrl, lgrl and lgfrl access the memory operand using the same addressing-space mode that has been used to fetch the instruction. This breaks the noexec mode for all user space binaries compiled with march=z10 or later. The only option is to remove the current noexec support. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-19module: undo module RONX protection correctly.Jan Glauber
While debugging I stumbled over two problems in the code that protects module pages. First issue is that disabling the protection before freeing init or unload of a module is not symmetric with the enablement. For instance, if pages are set to RO the page range from module_core to module_core + core_ro_size is protected. If a module is unloaded the page range from module_core to module_core + core_size is set back to RW. So pages that were not set to RO are also changed to RW. This is not critical but IMHO it should be symmetric. Second issue is that while set_memory_rw & set_memory_ro are used for RO/RW changes only set_memory_nx is involved for NX/X. One would await that the inverse function is called when the NX protection should be removed, which is not the case here, unless I'm missing something. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-10[S390] replace diag10() with diag10_range() functionMichael Holzheu
Currently the diag10() function can only release one page. For exploiters that have to call diag10 on a contiguous memory region this is suboptimal. This patch replaces the diag10() function with diag10_range() that is able to release multiple pages. In addition to that the new function now allows to release memory with addresses higher than 2047 MiB. This was due to a restriction of the diagnose implementation under z/VM prior to release 5.2. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-29[S390] irqstats: fix counting of pfault, dasd diag and virtio irqsHeiko Carstens
pfault, dasd diag and virtio all use the same external interrupt number. The respective interrupt handlers decide by the subcode if they are meant to handle the interrupt. Counting is currently done before looking at the subcode which means each handler counts an interrupt even if it is not handling it. Fix this by moving the kstat code after the code which looks at the subcode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-20[S390] pfault: fix token handlingHeiko Carstens
f6649a7e "[S390] cleanup lowcore access from external interrupts" changed handling of external interrupts. Instead of letting the external interrupt handlers accessing the per cpu lowcore the entry code of the kernel reads already all fields that are necessary and passes them to the handlers. The pfault interrupt handler was incorrectly converted. It tries to dereference a value which used to be a pointer to a lowcore field. After the conversion however it is not anymore the pointer to the field but its content. So instead of a dereference only a cast is needed to get the task pointer that caused the pfault. Fixes a NULL pointer dereference and a subsequent kernel crash: Unable to handle kernel pointer dereference at virtual kernel address (null) Oops: 0004 [#1] SMP Modules linked in: nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc loop qeth_l3 qeth vmur ccwgroup ext3 jbd mbcache dm_mod dasd_eckd_mod dasd_diag_mod dasd_mod CPU: 0 Not tainted 2.6.38-2-s390x #1 Process cron (pid: 1106, task: 000000001f962f78, ksp: 000000001fa0f9d0) Krnl PSW : 0404200180000000 000000000002c03e (pfault_interrupt+0xa2/0x138) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000001 0000000000000000 0000000000000001 000000001f962f78 0000000000518968 0000000090000002 000000001ff03280 0000000000000000 000000000064f000 000000001f962f78 0000000000002603 0000000006002603 0000000000000000 000000001ff7fe68 000000001ff7fe48 Krnl Code: 000000000002c036: 5820d010 l %r2,16(%r13) 000000000002c03a: 1832 lr %r3,%r2 000000000002c03c: 1a31 ar %r3,%r1 >000000000002c03e: ba23d010 cs %r2,%r3,16(%r13) 000000000002c042: a744fffc brc 4,2c03a 000000000002c046: a7290002 lghi %r2,2 000000000002c04a: e320d0000024 stg %r2,0(%r13) 000000000002c050: 07f0 bcr 15,%r0 Call Trace: ([<000000001f962f78>] 0x1f962f78) [<000000000001acda>] do_extint+0xf6/0x138 [<000000000039b6ca>] ext_no_vtime+0x30/0x34 [<000000007d706e04>] 0x7d706e04 Last Breaking-Event-Address: [<0000000000000000>] 0x0 For stable maintainers: the first kernel which contains this bug is 2.6.37. Reported-by: Stephen Powell <zlinuxman@wowway.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: stable@kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-20[S390] fix page table walk for changing page attributesJan Glauber
The page table walk for changing page attributes used the wrong address for pgd/pud/pmd lookups if the range was bigger than a pmd entry. Fix the lookup by using the correct address. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-15[S390] Write protect module text and RO dataJan Glauber
Implement write protection for kernel modules text and read-only data sections by implementing set_memory_[ro|rw] on s390. Since s390 has no execute bit in the pte's NX is not supported. set_memory_[ro|rw] will only work on normal pages and not on large pages, so in case a large page should be modified bail out with a warning. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31[S390] pgtable_list corruptionMartin Schwidefsky
After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-12[S390] Randomize mmap start addressHeiko Carstens
Randomize mmap start address with 8MB. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-12[S390] Rearrange mmap.cHeiko Carstens
Shuffle code around so it looks more like x86 and powerpc. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-12[S390] Enable flexible mmap layout for 64 bit processesHeiko Carstens
Historically 64 bit processes use the legacy address layout. However there is no reason why 64 bit processes shouldn't benefit from the flexible mmap layout advantages. Therefore just enable it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-12[S390] reduce miminum gap between stack and mmap_baseHeiko Carstens
Reduce minimum gap between stack and mmap_base to 32MB. That way there is a bit more space for heap and mmap for tight 31 bit address spaces. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-12[S390] mmap: consider stack address randomizationHeiko Carstens
Consider stack address randomization when calulating mmap_base for flexible mmap layout . Because of address randomization the stack address can be up to 8MB lower than STACK_TOP. When calculating mmap_base this isn't taken into account, which could lead to the case that the gap between the real stack top and mmap_base is lower than what ulimit specifies for the maximum stack size. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] ptrace cleanupMartin Schwidefsky
Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] pfault: delay register of pfault interruptHeiko Carstens
Use an early init call to initialize pfault. That way it is possible to use the register_external_interrupt() instead of the early variant. No need to enable pfault any earlier since it has only effect if user space processes are running. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05[S390] irq: have detailed statistics for interrupt typesHeiko Carstens
Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-10[S390] fix get_user_pages_fastMartin Schwidefsky
The check for the _PAGE_RO bit in get_user_pages_fast for write==1 is the wrong way around. It must not be set for the fast path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup facility list handlingMartin Schwidefsky
Store the facility list once at system startup with stfl/stfle and reuse the result for all facility tests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] kvm: Fix badness at include/asm/mmu_context.h:83Christian Borntraeger
commit 050eef364ad700590a605a0749f825cab4834b1e [S390] fix tlb flushing vs. concurrent /proc accesses broke KVM on s390x. On every schedule a Badness at include/asm/mmu_context.h:83 appears. s390_enable_sie replaces the mm on the __running__ task, therefore, we have to increase the attach count of the new mm. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from external interruptsMartin Schwidefsky
Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from program checksMartin Schwidefsky
Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] fix SIGBUS handlingMartin Schwidefsky
Raise SIGBUS with a siginfo structure. Deliver BUS_ADRERR as si_code and the address of the fault in the si_addr field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cmm: fix crash on case conversionHeiko Carstens
When the cmm module is compiled into the kernel it will crash when writing to the R/O data section. Reason is the lower to upper case conversion of the "sender" module parameter which ignored the fact that the pointer is preinitialized. Introduced with 41b42876 "cmm, smsgiucv_app: convert sender to uppercase" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] store indication fault optimizationMartin Schwidefsky
Use the store indication bit in the translation exception code on page faults to avoid the protection faults that immediatly follow the page fault if the access has been a write. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] lockless get_user_pages_fast()Martin Schwidefsky
Implement get_user_pages_fast without locking in the fastpath on s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] zero page cache synonymsMartin Schwidefsky
If the zero page is mapped to virtual user space addresses that differ only in bit 2^12 or 2^13 we get L1 cache synonyms which can affect performance. Follow the mips model and use multiple zero pages to avoid the synonyms. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-07Fix IRQ flag handling namingDavid Howells
Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-08-24[S390] fix tlb flushing vs. concurrent /proc accessesMartin Schwidefsky
The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-08-10Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] dasd: tunable missing interrupt handler [S390] dasd: allocate fallback cqr for reserve/release [S390] topology: use default MC domain initializer [S390] initrd: change default load address [S390] cmm, smsgiucv_app: convert sender to uppercase [S390] cmm: add missing __init/__exit annotations [S390] cio: use all available paths for some internal I/O [S390] ccwreq: add ability to use all paths [S390] cio: ccw_device_online_store return -EINVAL in case of missing driver [S390] cio: Log the response from the unit check handler [S390] cio: CHSC SIOSL Support
2010-08-09mm: provide init_mm mm_context initializerHeiko Carstens
Provide an INIT_MM_CONTEXT intializer macro which can be used to statically initialize mm_struct:mm_context of init_mm. This way we can get rid of code which will do the initialization at run time (on s390). In addition the current code can be found at a place where it is not expected. So let's have a common initializer which architectures can use if needed. This is based on a patch from Suzuki Poulose. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Suzuki Poulose <suzuki@in.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>