aboutsummaryrefslogtreecommitdiff
path: root/arch/parisc/kernel/time.c
AgeCommit message (Collapse)Author
2011-11-21clocksource: parisc: Convert to clocksource_register_hz/khzJohn Stultz
This converts the parisc clocksources to use clocksource_register_hz/khz This is untested, so any assistance in testing would be appreciated! CC: Kyle McMartin <kyle@mcmartin.ca> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-01-31parisc: Switch do_timer() to xtime_update()Torben Hohn
xtime_update() takes the xtime_lock itself. Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: hch@infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150017.23248.22559.stgit@localhost> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-06parisc: Convert to read/update_persistent_clockjohn stultz
This patch converts the parisc architecture to use the generic read_persistent_clock and update_persistent_clock interfaces, reducing the amount of arch specific code we have to maintain, and allowing for further cleanups in the future. I have not built or tested this patch, so help from arch maintainers would be appreciated. Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: fix "delay!" timer handlingGrant Grundler
Rewrote timer_interrupt() to properly handle the "delayed!" case. If we used floating point math to compute the number of ticks that had elapsed since the last timer interrupt, it could take up to 12K cycles (emperical!) to handle the interrupt. Existing code assumed it would never take more than 8k cycles. We end up programming Interval Timer to a value less than "current" cycle counter. Thus have to wait until Interval Timer "wrapped" and would then get the "delayed!" printk that I moved below. Since we don't really know what the upper limit is, I prefer to read CR16 again after we've programmed it to make sure we won't have to wait for CR16 to wrap. Further, the printk was between reading CR16 (cycle couner) and writing CR16 (the interval timer). This would cause us to continue to set the interval timer to a value that was "behind" the cycle counter. Rinse and repeat. So no printk's between reading CR16 and setting next interval timer. Tested on A500 (550 Mhz PA8600). Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Tested-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> ---- Kyle, Helge, and other parisc's, Please test on 32-bit before committing. I think I have it right but recognize I might not. TODO: I wanted to use "do_div()" in order to get both remainder and value back with one division op. That should help with the latency alot but can be applied seperately from this patch. thanks, grant
2009-07-03parisc: add parameter to read_cr16()Coly Li
This patch modifies parameter of au1x_counter1_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li <coly.li@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (23 commits) parisc: move dereference_function_descriptor to process.c parisc: Move kernel Elf_Fdesc define to <asm/elf.h> parisc: fix build when ARCH_HAS_KMAP parisc: fix "make tar-pkg" parisc: drivers: fix warnings parisc: select BUG always parisc: asm/pdc.h should include asm/page.h parisc: led: remove proc_dir_entry::owner parisc: fix macro expansion in atomic.h parisc: iosapic: fix build breakage parisc: oops_enter()/oops_exit() in die() parisc: document light weight syscall ABI parisc: blink all or loadavg LEDs on oops parisc: add ftrace (function and graph tracer) functionality parisc: simplify sys_clone() parisc: add LATENCYTOP_SUPPORT and CONFIG_STACKTRACE_SUPPORT parisc: allow to build with 16k default kernel page size parisc: expose 32/64-bit capabilities in cpuinfo parisc: use constants instead of numbers in assembly parisc: fix usage of 32bit PTE page table entries on 32bit kernels ...
2009-04-02parisc: rtc: Rename rtc-parisc to rtc-genericGeert Uytterhoeven
The rtc-parisc driver is not PA-RISC specific at all, as it uses the existing (but deprecated) generic RTC infrastructure ([gs]et_rtc_time()). Rename the driver from rtc-parisc to rtc-generic. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-01rtc-parisc: remove unnecessary ret variabledann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01rtc-parisc: declare rtc_parisc_dev as staticdann frazier
Signed-off-by: dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31parisc: add ftrace (function and graph tracer) functionalityHelge Deller
This patch adds the ftrace debugging functionality to the parisc kernel. It will currently only work with 64bit kernels, because the gcc options -pg and -ffunction-sections can't be enabled at the same time and -ffunction-sections is still needed to be able to link 32bit kernels. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-01-05parisc: Replace NR_CPUS in parisc codeHelge Deller
parisc: Replace most arrays sized by NR_CPUS with percpu variables. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-10-10parisc: add rtc platform driverKyle McMartin
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-10-18[PARISC] Kill pointless variable use in time.cKyle McMartin
Clean up a pointless use of a variable in update_cr16_clocksource. It just looks silly. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-05-22[PARISC] spelling fixes: arch/parisc/Simon Arlott
Spelling fixes in arch/parisc/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26[PARISC] clocksource: Move update_cr16_clocksource later in bootKyle McMartin
smp_cpus_done is too early for us... before we even do a device inventory! Move update_cr16_clocksource into the tail end of processor_probe() and stub it out on CONFIG_SMP=n builds. Verified that clocksource0 is properly updated to use jiffies on an SMP build. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26[PARISC] time: clocksource lost update_callbackKyle McMartin
So move the code to be called by smp_cpus_done, which is after we've figured out if there's more than one cpu actually present. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26[PARISC] time: Convert clocksource is_continuous to flagKyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26[PARISC] clocksource_cr16: Use clocksource_change_rating()Kyle McMartin
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-26Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits) [PARISC] Use symbolic last syscall in __NR_Linux_syscalls [PARISC] Add missing statfs64 and fstatfs64 syscalls Revert "[PARISC] Optimize TLB flush on SMP systems" [PARISC] Compat signal fixes for 64-bit parisc [PARISC] Reorder syscalls to match unistd.h Revert "[PATCH] make kernel/signal.c:kill_proc_info() static" [PARISC] fix sys_rt_sigqueueinfo [PARISC] fix section mismatch warnings in harmony sound driver [PARISC] do not export get_register/set_register [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code [PARISC] convert to use CONFIG_64BIT instead of __LP64__ [PARISC] use CONFIG_64BIT instead of __LP64__ [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro [PARISC] more ENTRY(), ENDPROC(), END() conversions [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc [PARISC] Fixes /proc/cpuinfo cache output on B160L [PARISC] implement standard ENTRY(), END() and ENDPROC() [PARISC] kill ENTRY_SYS_CPUS [PARISC] clean up debugging printks in smp.c [PARISC] factor syscall_restart code out of do_signal ... Fix conflict in include/linux/sched.h due to kill_proc_info() being made publicly available to PARISC again.
2007-02-17[PARISC] Convert soft power switch driver to kthreadHelge Deller
And remove it's reference in time.c. Allow lcd_print() to take a const char *. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-17[PARISC] disable cr16 clocksource when multiple CPUs are onlineHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-17[PARISC] GENERIC_TIME patchset for pariscHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-02-11[PATCH] Consolidate default sched_clock()Alexey Dobriyan
Use attribute(weak). Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-07[PARISC] More pt_regs removalMatthew Wilcox
Remove pt_regs from ipi_interrupt and timer_interrupt. Inline smp_do_timer() into its only caller, and unify the SMP and non-SMP paths. Fixes a profiling bug. Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-07[PARISC] Make firmware calls irqsafe-ish...Kyle McMartin
There's no reason why we shouldn't be using _irqsave instead of _irq for any of these calls. fwiw, this fixes the "start_kernel(): bug: interrupts were enabled early" message displayed on bootup recently. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-06Build fixes for struct pt_regs removalMatthew Wilcox
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-05[PA-RISC] Fix time.c for new do_timer() calling conventionMatthew Wilcox
do_timer now wants to know how many ticks have elapsed. Now that we have to calculate that, we can eliminate some of the clever code that avoided having to calculate that. Also add some more documentation. I'd like to thank Grant Grundler for helping me with this. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
2006-10-04[PARISC] Kill wall_jiffies useAndrew Morton
wall_jiffies and jiffies are now equal, so this is a noop... Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Further updates to timer_interrupt()Grant Grundler
This version (relative to the current tree): o eliminates "while (ticks_elapsed)" loop. It's not needed. o drop "ticks_elapsed" completely from timer_interrupt(). o Estimates elapsed cycles (based on HZ) to see which kind of math we want to use to calculate "cycles_remainder". o Fixes a bug where we would loose a tick if we decided we wanted to skip one interrupt. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] remove halftick and copy clocktick to local var (gcc can optimize ↵Grant Grundler
usage) Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Rewrite timer_interrupt() and gettimeoffset() using "unsigned" math.Grant Grundler
It's just a bit easier to follow and timer code is complex enough. So far, only tested on A500-5x (64-bit SMP), ie: gettimeoffset() code hasn't been tested at all. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Add new function to start local Interval Timer, start_cpu_itimer()Grant Grundler
I couldn't find where the itimer was getting started for slave CPUs. CPU 0 (master) itimer was started in time_init() (arch/parisc/kernel/time.c). start_cpu_itimer() code was striped from time_init(). Slaves now start their itimer in smp_cpu_init(). This is a first step towards making gettimeoffset() work for SMP. Next step will be to determine the CR16 (cycle counter) offsets for each CPU relative to the master (CPU 0). Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-01[PATCH] kill wall_jiffiesAtsushi Nemoto
With 2.6.18-rc4-mm2, now wall_jiffies will always be the same as jiffies. So we can kill wall_jiffies completely. This is just a cleanup and logically should not change any real behavior except for one thing: RTC updating code in (old) ppc and xtensa use a condition "jiffies - wall_jiffies == 1". This condition is never met so I suppose it is just a bug. I just remove that condition only instead of kill the whole "if" block. [heiko.carstens@de.ibm.com: s390 build fix and cleanup] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] simplify update_times (avoid jiffies/jiffies_64 aliasing problem)Atsushi Nemoto
Pass ticks to do_timer() and update_times(), and adjust x86_64 and s390 timer interrupt handler with this change. Currently update_times() calculates ticks by "jiffies - wall_jiffies", but callers of do_timer() should know how many ticks to update. Passing ticks get rid of this redundant calculation. Also there are another redundancy pointed out by Martin Schwidefsky. This cleanup make a barrier added by 5aee405c662ca644980c184774277fc6d0769a84 needless. So this patch removes it. As a bonus, this cleanup make wall_jiffies can be removed easily, since now wall_jiffies is always synced with jiffies. (This patch does not really remove wall_jiffies. It would be another cleanup patch) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PARISC] Fix do_gettimeofday() hangJames Bottomley
Apparently gettimeoffset can return small negative values (usually in the 100us range). If xtime.tv_nsec is accidentally less than this, though (a fortunately unlikely event) it triggers the loop forever. I've added a test and correct adjustment for this case. It has a warning printk in there which I'd like to leave for the time being just in case this problem implicates some other part of the kernel. Signed-off-by: James Bottomley <jejb@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PARISC] Add __read_mostly section for pariscHelge Deller
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-30[PATCH] jiffies_64 cleanupThomas Gleixner
Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21[PARISC] Use work queue in LED/LCD driver instead of tasklet.Grant Grundler
2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet. Main advantage is it allows use of msleep() in the led_LCD_driver to "atomically" perform two MMIO writes (CMD, then DATA). Lead to nice cleanup of the main led_work_func() and led_LCD_driver(). Kudos to David for being persistent. From: David Pye <dmp@davidmpye.dyndns.org> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21[PARISC] Take into account nullified insn and lock functions for profilingRandolph Chung
export profile_pc() symbol - oprofile needs it when built as a module. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Take into account nullified insn and lock functions for profiling This is needed at the end of functions; it is typical that the return branch nullifies the next insn, which is in the next function. This causes profiling data to show up against the "wrong" function. We also count lock times against the locker. This is consistent with other architectures. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-09-07[PATCH] NTP: ntp-helper functionsjohn stultz
This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-27 12:01:04 +0000