aboutsummaryrefslogtreecommitdiff
path: root/arch/microblaze/kernel
AgeCommit message (Collapse)Author
2011-10-14microblaze: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW usagePeter Zijlstra
As far as I can tell the only reason microblaze has __ARCH_WANT_INTERRUPTS_ON_CTXSW is because it initializes new task state with interrupts enabled so that on switch_to() interrupts get enabled. So change copy_thread() to clear MSR_IE instead of set it, this will ensure switch_to() will always keep IRQs disabled. The scheduler will disable IRQs when taking rq->lock in schedule() and enable IRQs in finish_lock_switch() after its done its magic. This leaves ARM the only __ARCH_WANT_INTERRUPTS_ON_CTXSW user. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Raise SIGFPE/FPE_INTDIV for div by zeroEdgar E. Iglesias
It fixes the signal nr raised for divizion by zero from SIGILL to SIGFPE, in accordance to POSIX and other archs. This came up due to a failed test in the GCC testsuite. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-10-14microblaze: Switch ELF_ARCH code to 189Edgar E. Iglesias
Switch arch code to 189, the registered code in the upstream version of binutils. Continue to accept the experimental 0xbaab. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Added DMA sync operationsEli Billauer
Added support gor dma_direct_sync_single_for_*() and dma_direct_sync_sg_for_*() Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Moved __dma_sync() to dma-mapping.hEli Billauer
__dma_sync_page() was replaced by __dma_sync(), and parameters of calls to the new function were adjusted to match __dma_sync()'s format. Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Add PVR for Microblaze v8.20.aMichal Simek
Microblaze v8.20.a has 0x15 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Clear top bit from cnt32_to_63Michal Simek
Top bit is used as garbage and it must be clear explicitly. It is causing the problem with soft lookup code because it checks delays which are long when top bit is setup. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-08-26All Arch: remove linkage for sys_nfsservctl system callNeilBrown
The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Do not show error message for 32 interrupt lines Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus" microblaze: PCI fix typo fault in of_node pointer moving into pci_bus microblaze: Add support for early console on mdm microblaze: Simplify early console binding from DT microblaze: Get early printk console earlier microblaze: Standardise cpuinfo output for cache policy microblaze: Unprivileged stream instruction awareness microblaze: trivial: Fix typo fault microblaze: exec: Remove redundant set_fs(USER_DS) microblaze: Remove duplicated prototype of start_thread() microblaze: Fix unaligned value saving to the stack for system with MMU microblaze/irqs: Do not trace arch_local_{*,irq_*} functions
2011-07-27microblaze: Do not show error message for 32 interrupt linesMichal Simek
When interrupt controller uses 32 interrupts lines the kernel show error message about mismatch in kind-of-intr parameter because it exceeds u32. Recast fixs this issue. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: Add support for early console on mdmMichal Simek
Support mdm early console: - extend time for retries - add mdm compatible property Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: Simplify early console binding from DTMichal Simek
Recognize early Linux console from chosen - linux,stdout-path instead of detecting the first console with appropriate compatible strings. This patch solved the problem on system with multiple consoles. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: Get early printk console earlierMichal Simek
1. Register early console as standard console 2. Enable CON_BOOT console flag to ensure auto-unregistering by the kernel 3. remap_early_printk function remap physical console baseaddr to virtual space Usage specific function for console remap is done after memory initialization with IRQ turn off that's why there is not necessary to protect it. The reason for remapping is that the kernel use TLB 63 for 1:1 address mapping to be able to use console in very early boot-up phase. But allocating one TLB just for console caused performance degression that's why ioremaps create new mapping and TLB 63 is automatically released and ready to use. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Russell King <linux@arm.linux.org.uk> CC: Ralf Baechle <ralf@linux-mips.org> CC: Ingo Molnar <mingo@redhat.com> CC: Alan Cox <alan@linux.intel.com> CC: <linux-serial@vger.kernel.org> CC: Arnd Bergmann <arnd@arndb.de>
2011-07-25microblaze: Standardise cpuinfo output for cache policyJohn A. Williams
The current cpuinfo output for the cache policy has no leading tag:, making it difficult to parse. Add a leaning "Dcache-policy:" tag to this field. Signed-off-by: John A. Williams <john.williams@petalogix.com>
2011-07-25microblaze: Unprivileged stream instruction awarenessJohn A. Williams
Add cpuinfo support for the new MicroBlaze option permitting userspace (unprivileged) access to the streaming instructions (FSL / AXI-stream). Emit a noisy warning at bootup if this is enabled, because bad user code can potentially lockup the CPU. Signed-off-by: John A. Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: exec: Remove redundant set_fs(USER_DS)Mathias Krause
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com>
2011-07-25microblaze: Fix unaligned value saving to the stack for system with MMUMichal Simek
Several registers weren't saved correctly to the stack. Unaligned expection for system with MMU stores value in ex_tmp_data_loc_X address which is load to registers r3. The next step is to move this value from r3 to a destination register which caused unaligned exception. For several registers this value was directly moved to the register. For example for r28: by "or r28, r0, r3" but register r28 was rewritten when kernel returns from exception handler by value saved on stack. This patch changed r3 saving to the correct address on the stack. For example for r28: by "swi r3, r1, 4 * 28" When kernel returns from the exception handler, correct value is restored. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-24modules: make arch's use default loader hooksJonas Bonn
This patch removes all the module loader hook implementations in the architecture specific code where the functionality is the same as that now provided by the recently added default hooks. Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-28Merge branch 'setns'Linus Torvalds
* setns: ns: Wire up the setns system call Done as a merge to make it easier to fix up conflicts in arm due to addition of sendmmsg system call
2011-05-28ns: Wire up the setns system callEric W. Biederman
32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com> v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com> v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger <vapier@gentoo.org> Oh - ia64 wiring looks good. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25Merge branch 'devicetree/arm-next' of git://git.secretlab.ca/git/linux-2.6 ↵Russell King
into devel-stable
2011-05-14Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-11dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosenGrant Likely
This patch drops the reference to a global 'cmd_line' variable from early_init_dt_scan_chosen, and instead passes the pointer to the command line string via the *data argument. Each architecture does something slightly different with the initial command line, so it makes sense for the architecture to be able to specify the variable name. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-01microblaze: Fix ftraceMichal Simek
- Do not trace idle loop which takes a lot time - Fix cache handling in generic ftrace code - Do not trace lib functions ashldi3, ashrdi3, lshrdi3 Functions are called from generic ftrace code which can't be traced Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-04-01microblaze: Wire up new syscallsMichal Simek
Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-04-01microblaze: Fix level/edge irq sensibilityMichal Simek
Patches: "microblaze: Convert to new irq function names" sha (4adc192ec7d977c74c750320f289af9d61c1caca) and "microblaze: Use generic show_interrupts()" sha(9d61c18b25726306c9231428c17db42e3ff29ba7) should also setup edge/level in irq_set_chip_and_handler_name name parameter. Error log: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-Xilinx INTC eth0 3: 2 Xilinx INTC-Xilinx INTC eth0 4: 241 Xilinx INTC-Xilinx INTC timer 6: 108 Xilinx INTC-Xilinx INTC serial Fixed: ~ # cat /proc/interrupts CPU0 2: 2 Xilinx INTC-level eth0 3: 2 Xilinx INTC-level eth0 4: 238 Xilinx INTC-edge timer 6: 108 Xilinx INTC-level serial Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Thomas Gleixner <tglx@linutronix.de> --- v2: Fix exchanged edge and level
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29microblaze: Use generic show_interrupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29microblaze: Convert to new irq function namesThomas Gleixner
Namespace conversion scripted with coccinelle. Also retrieve the irq type from irq_data in intc_enable_or_unmask() Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-20Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17microblaze: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-16Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (33 commits) microblaze: Do not copy reset vectors/manual reset vector setup microblaze: Fix _reset function microblaze: Fix microblaze init vectors microblaze: Fix circular headers dependency when ftrace is enabled. microblaze: Fix typo in Kconfig microblaze: Add missing export symbols for lib functions microblaze: Fix /dev/zero corruption from __clear_user() microblaze: Convert irq_chip to new functions microblaze: Select GENERIC_HARDIRQS_NO_DEPRECATED microblaze: Remove stale irq_chip.end microblaze: Fix sparse warnings - signal.c microblaze: Fix sparse warning - fault.c microblaze: Fix missing microblaze specific syscalls declaration microblaze: Fix sparse warnings - cache.c microblaze: Fix sparse warning - cpuinfo.h microblaze: Fix sparse warning - unwind.c microblaze: Fix sparse warning - consistent_alloc function microblaze: Fix sparse warnings - ptrace microblaze: Fix sparse warning - sw_exceptions microblaze: Fix sparse warning - timer.c ...
2011-03-15microblaze: Do not copy reset vectors/manual reset vector setupMichal Simek
Reset vector can be setup by bootloader and kernel doens't need to touch it. If you require to setup reset vector, please use CONFIG_MANUAL_RESET_VECTOR throught menuconfig. It is not possible to setup address 0x0 as reset address because make no sense to set it up at all. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: John Williams <john.williams@petalogix.com>
2011-03-15microblaze: Fix _reset functionMichal Simek
If soft reset falls through with no hardware assisted reset, the best we can do is jump to the reset vector and see what the bootloader left for us. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: John Williams <john.williams@petalogix.com>
2011-03-15microblaze: Fix microblaze init vectorsMichal Simek
Microblaze vector table stores several vectors (reset, user exception, interrupt, debug exception and hardware exception). All these functions can be below address 0x10000. If they are, wrong vector table is genarated because jump is not setup from two instructions (imm upper 16bit and brai lower 16bit). Adding specific offset prevent problem if address is below 0x10000. For this case only brai instruction is used. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Add missing export symbols for lib functionsMichal Simek
Adding missing export symbols for loadable modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Convert irq_chip to new functionsThomas Gleixner
Use proper irq_desc wrappers while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Remove stale irq_chip.endThomas Gleixner
irq_chip.end got obsolete with the removal of __do_IRQ(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Michal Simek <monstr@monstr.eu> LKML-Reference: <20110203004210.240154507@linutronix.de>
2011-03-09microblaze: Fix sparse warnings - signal.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/signal.c arch/microblaze/kernel/signal.c:200:9: warning: Using plain integer as NULL pointer arch/microblaze/kernel/signal.c:201:9: warning: incorrect type in initializer (different address spaces) arch/microblaze/kernel/signal.c:201:9: expected void [noderef] *volatile __gu_val<asn:1> arch/microblaze/kernel/signal.c:201:9: got void *<noident> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix missing microblaze specific syscalls declarationMichal Simek
Warning log: CHECK arch/microblaze/kernel/sys_microblaze.c arch/microblaze/kernel/sys_microblaze.c:37:17: warning: symbol 'microblaze_vfork' was not declared. Should it be static? arch/microblaze/kernel/sys_microblaze.c:43:17: warning: symbol 'microblaze_clone' was not declared. Should it be static? arch/microblaze/kernel/sys_microblaze.c:50:17: warning: symbol 'microblaze_execve' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warnings - cache.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/cpu/cache.c arch/microblaze/kernel/cpu/cache.c:522:21: warning: symbol 'wb_msr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:538:21: warning: symbol 'wb_nomsr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:554:21: warning: symbol 'wt_msr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:569:21: warning: symbol 'wt_nomsr' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:585:21: warning: symbol 'wt_msr_noirq' was not declared. Should it be static? arch/microblaze/kernel/cpu/cache.c:600:21: warning: symbol 'wt_nomsr_noirq' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - unwind.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/unwind.c arch/microblaze/kernel/unwind.c:186:6: warning: symbol 'microblaze_unwind_inner' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warnings - ptraceMichal Simek
Warning log: CHECK arch/microblaze/kernel/ptrace.c arch/microblaze/kernel/ptrace.c:126:11: warning: incorrect type in initializer (different address spaces) arch/microblaze/kernel/ptrace.c:126:11: expected unknown type 2[noderef] *__pu_addr<asn:1> arch/microblaze/kernel/ptrace.c:126:11: got unsigned long *<noident> arch/microblaze/kernel/ptrace.c:134:17: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static? arch/microblaze/kernel/ptrace.c:157:17: warning: symbol 'do_syscall_trace_leave' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - sw_exceptionsMichal Simek
Function sw_exception is linked with asm code. Warning log: CHECK arch/microblaze/kernel/exceptions.c arch/microblaze/kernel/exceptions.c:53:6: warning: symbol 'sw_exception' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - timer.cMichal Simek
Variables and init_microblaze_timecounter should be static. Warning log: CHECK arch/microblaze/kernel/timer.c arch/microblaze/kernel/timer.c:41:14: warning: symbol 'freq_div_hz' was not declared. Should it be static? arch/microblaze/kernel/timer.c:42:14: warning: symbol 'timer_clock_freq' was not declared. Should it be static? arch/microblaze/kernel/timer.c:205:12: warning: symbol 'init_microblaze_timecounter' was not declared. Should it be static? Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Fix sparse warning - prom.cMichal Simek
Warning log: CHECK arch/microblaze/kernel/dma.c arch/microblaze/kernel/dma.c:53:26: warning: incorrect type in argument 1 (different base types) arch/microblaze/kernel/dma.c:53:26: expected int [signed] gfp arch/microblaze/kernel/dma.c:53:26: got restricted unsigned int [usertype] flag Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Add support for DMA_BIDIRECTIONALMichal Simek
CDMA requires DMA_BIDIRECTIONAL option. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: trivial: Add one empty lineMichal Simek
Add one empty line to microblaze_ksyms.c. Remove one empty line to cacheflush.h. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Add PVR for Microblaze v8.10.aMichal Simek
Microblaze v8.10.a has 0x14 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-18 06:37:08 +0000