aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-07-31ARM: at91: convert old leds drivers to gpio_led and led_trigger driversBryan Wu
Build with at91 defconfigs successfully Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes for SPEAr from Olof Johansson: "These are arriving very late in the release cycle, but there has been a change of maintainers on the SPEAr platform and they have needed a while to get going. The patch count is higher than I would like at this point, but they're all relevant fixes and well-contained in their own platform code. I still think it's suitable 3.5 material and I don't think it should increase the need for a -rc8 since they are so contained." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE ARM: dts: SPEAr320: Fix compatible string Clk: SPEAr1340: Update sys clock parent array clk: SPEAr1340: Fix clk enable register for uart1 and i2c1. ARM: SPEAr13xx: Fix Interrupt bindings Clk:spear6xx:Fix: Rename clk ids within predefined limit Clk:spear3xx:Fix: Rename clk ids within predefined limit clk:spear1310:Fix: Rename clk ids within predefined limit clk:spear1340:Fix: Rename clk ids within predefined limit
2012-07-18ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsiStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Boot the board in EXTENDED_MODEVipul Kumar Samar
On spear320 device supported mode are: * AUTO_NET_SMII_MODE * AUTO_NET_MII_MODE * AUTO_EXP_MODE * SMALL_PRINTERS_MODE * EXTENDED_MODE spear320-evb board is designed for EXTENDED_MODE only, hence it does not boot correctly in current form where pinctrl part for some devices fail. Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: dts: SPEAr320: Fix compatible stringVipul Kumar Samar
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18ARM: SPEAr13xx: Fix Interrupt bindingsVipul Kumar Samar
- Correct interrupt bindings for uart, ethernet and pmu. - Added interrupt binding for keyboard. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18Clk:spear6xx:Fix: Rename clk ids within predefined limitVipul Kumar Samar
The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk pll3_48m -> pll3_ Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18Clk:spear3xx:Fix: Rename clk ids within predefined limitVipul Kumar Samar
The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk ras_pll3_48m -> ras_pll3_ pll3_48m -> pll3_ Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-17Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and DMA-mapping fixes from Marek Szyprowski: "Another set of minor fixups for recently merged Contiguous Memory Allocator and ARM DMA-mapping changes. Those patches fix mysterious crashes on systems with CMA and Himem enabled as well as some corner cases caused by typical off-by-one bug." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: modify condition check while freeing pages mm: cma: fix condition check when setting global cma area mm: cma: don't replace lowmem pages with highmem
2012-07-16ARM: dma-mapping: modify condition check while freeing pagesPrathyush K
WARNING: at mm/vmalloc.c:1471 __iommu_free_buffer+0xcc/0xd0() Trying to vfree() nonexistent vm area (ef095000) Modules linked in: [<c0015a18>] (unwind_backtrace+0x0/0xfc) from [<c0025a94>] (warn_slowpath_common+0x54/0x64) [<c0025a94>] (warn_slowpath_common+0x54/0x64) from [<c0025b38>] (warn_slowpath_fmt+0x30/0x40) [<c0025b38>] (warn_slowpath_fmt+0x30/0x40) from [<c0016de0>] (__iommu_free_buffer+0xcc/0xd0) [<c0016de0>] (__iommu_free_buffer+0xcc/0xd0) from [<c0229a5c>] (exynos_drm_free_buf+0xe4/0x138) [<c0229a5c>] (exynos_drm_free_buf+0xe4/0x138) from [<c022b358>] (exynos_drm_gem_destroy+0x80/0xfc) [<c022b358>] (exynos_drm_gem_destroy+0x80/0xfc) from [<c0211230>] (drm_gem_object_free+0x28/0x34) [<c0211230>] (drm_gem_object_free+0x28/0x34) from [<c0211bd0>] (drm_gem_object_release_handle+0xcc/0xd8) [<c0211bd0>] (drm_gem_object_release_handle+0xcc/0xd8) from [<c01abe10>] (idr_for_each+0x74/0xb8) [<c01abe10>] (idr_for_each+0x74/0xb8) from [<c02114e4>] (drm_gem_release+0x1c/0x30) [<c02114e4>] (drm_gem_release+0x1c/0x30) from [<c0210ae8>] (drm_release+0x608/0x694) [<c0210ae8>] (drm_release+0x608/0x694) from [<c00b75a0>] (fput+0xb8/0x228) [<c00b75a0>] (fput+0xb8/0x228) from [<c00b40c4>] (filp_close+0x64/0x84) [<c00b40c4>] (filp_close+0x64/0x84) from [<c0029d54>] (put_files_struct+0xe8/0x104) [<c0029d54>] (put_files_struct+0xe8/0x104) from [<c002b930>] (do_exit+0x608/0x774) [<c002b930>] (do_exit+0x608/0x774) from [<c002bae4>] (do_group_exit+0x48/0xb4) [<c002bae4>] (do_group_exit+0x48/0xb4) from [<c002bb60>] (sys_exit_group+0x10/0x18) [<c002bb60>] (sys_exit_group+0x10/0x18) from [<c000ee80>] (ret_fast_syscall+0x0/0x30) This patch modifies the condition while freeing to match the condition used while allocation. This fixes the above warning which arises when array size is equal to PAGE_SIZE where allocation is done using kzalloc but free is done using vfree. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-07-14Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Samsung SoC fixes from Arnd Bergmann. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers
2012-07-13ARM: S3C24XX: Correct CAMIF interrupt definitionsSylwester Nawrocki
Properly define the CAMIF interrupt resources. This device have two interrupts - corresponding to the "codec" and "preview" data paths. IRQ_CAM is handled internally by the architecture and demultiplexed to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only should be handled in the driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Correct AC97 clock control bit for S3C2440Sylwester Nawrocki
Use correct gate control bit for AC97 clock which is S3C2440_CLKCON_AC97, not S3C2440_CLKCON_CAMERA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Update default rate for xusbxti clockTushar Behera
The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12ARM: EXYNOS: register devices in 'need_restore' state for pm_domainsMarek Szyprowski
Commit ca1d72f033 ('PM / Domains: Make it possible to add devices to inactive domains') introduced possibility to add devices to inactive power domains and added pm_genpd_dev_need_restore() function which lets platform core to notify power domain core that the specified device must be restored (with its runtime_resume() callback) before first use. This patch adds the pm_genpd_dev_need_restore() call what brings back the suspend/resume behaviour for the client devices known from the previous power domain driver (removed by commit 91cfbd4ee0 - 'ARM: EXYNOS: Hook up power domains to generic power domain infrastructure'). Client device drivers relay on that suspend/resume behaviour, thus this patch fixes runtime pm operation for client devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12ARM: EXYNOS: read initial state of power domain from hw registersMarek Szyprowski
Some bootloaders disable unused power domains to reduce power consuption. Power domain driver can easily read the actual state from the hardware registers instead of assuming that their initial state is always 'on'. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-11Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: - multiple omap2+ bug fixes - a regression on ux500 dt support - a build failure on shmobile * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n ARM: ux500: Over-ride the DT device naming scheme for pinctrl ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set of: address: Don't fail a lookup just because a node has no reg property ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
2012-07-10Merge tag 'omap-fixes-for-v3.5-rc6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren <tony@atomide.com>: Here is one PM regression fix and a defconfig change to disable echi-omap because the driver currently causes issues with PM. This annoys Kevin as it makes it harder for him to validate that PM is working. The proper fixes for the echi-omap are being discussed, but looks like it will not be properly working with PM until in v3.7. * tag 'omap-fixes-for-v3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-09ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable itKevin Hilman
The EHCI driver is not stable enough to be enabled by default. In v3.5, it has at least the following problems: - warning dump during bootup - hang during suspend - prevents CORE powerdomain from entering retention during idle (even when no USB devices connected.) This demonstrates that this driver has not been thoroughly tested and therfore should not be enabled in the default defconfig. In addition, the problems above cause new PM regressions which need be addressed before this driver should be enabled in the default defconfig. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-07Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Last merge window, we had some updates from Al cleaning up the signal restart handling. These have caused some problems on ARM, and while Al has some fixes, we have some concerns with Al's patches but we've been unsuccesful with discussing this. We have got to the point where we need to do something, and we've decided that the best solution is to revert the appropriate commits until Al is able to reply to us. Also included here are four patches to fix warnings that I've noticed in my build system, and one fix for kprobes test code." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix warning caused by wrongly typed arm_dma_limit ARM: fix warnings about atomic64_read ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6 ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK" ARM: 7442/1: Revert "remove unused restart trampoline" ARM: fix set_domain() macro ARM: fix mach-versatile/pci.c warning
2012-07-06ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=nMagnus Damm
Fix build error in the case of SMP=y but ARCH_SH73A0=n introduced by: 9601e87 ARM: shmobile: fix smp build The use of of_machine_is_compatible() will link in the the SoC-specific symbols: "sh73a0_get_core_count", "sh73a0_smp_prepare_cpus", "sh73a0_secondary_init" and "sh73a0_boot_secondary". This patch adds an ugly #ifdef wrapper as a stop-gap solution. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Tested-by: Simon Horman <horms@verge.net.au> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06Merge branch 'ux500/fixes-3.5' into fixesArnd Bergmann
From Lee Jones <lee.jones@linaro.org>: * ux500/fixes-3.5: ARM: ux500: Over-ride the DT device naming scheme for pinctrl ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set of: address: Don't fail a lookup just because a node has no reg property I ended up rebasing Lee's branch on 3.5-rc5 because we have more patches lined for 3.6 that depend on them, and I want to keep all branches in arm-soc be based on -rc releases rather than random commits in the upstream history. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06ARM: ux500: Over-ride the DT device naming scheme for pinctrlLee Jones
When pin control mapping tables are written the registered device name is supplied for use in name-based searches within the pinctrl driver. In the case of the DB8500 the string "pinctrl-db8500" is used. However, when we register the driver with Device Tree, its naming convention uses something that looks more like "pinctrl.2". To work around the device naming inconsistencies between devices registered via platform code and the ones registered by Device Tree, we use AUXDATA to over-ride the Device Tree naming scheme. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-06ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not setLee Jones
When MACH_UX500_DT and all related Device Tree configurations are forced off the warning and error below prevent the kernel from compiling. This simple patch fixes both issues and allows for full build and boot of ST-Ericsson's low-cost development board, Snowball. Warnings fixed: arch/arm/mach-ux500/board-mop500.c:680:32: warning: ‘snowball_of_platform_devs’ defined but not used Errors fixed: arch/arm/mach-ux500/timer.c: In function ‘ux500_timer_init’: arch/arm/mach-ux500/timer.c:66:3: error: implicit declaration of function ‘of_find_matching_node’ arch/arm/mach-ux500/timer.c:66:6: warning: assignment makes pointer from integer without a cast Cc: stable@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-06Merge branch 'for_3.5/fixes/pm-3' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2012-07-05ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timerPaul Walmsley
Kevin discovered that commit c8d82ff68fb6873691536cf33021977efbf5593c ("ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database") broke CORE idle on OMAP3. This prevents device low power states. The root cause is that the 32K sync timer IP block does not support smart-idle mode[1], and so the hwmod code keeps the IP block in no-idle mode while it is active. This in turn prevents the WKUP clockdomain from transitioning to idle. There is a hardcoded sleep dependency that prevents the CORE_L3 and CORE_CM clockdomains from transitioning to idle when the WKUP clockdomain is active[2], so the chip cannot enter any device low power states. It turns out that there is no need to take the 32k sync timer out of idle. The IP block itself probably does not have any native idle handling at all, due to its simplicity. Furthermore, the PRCM will never request target idle for this IP block while the kernel is running, due to the sleep dependency that prevents the WKUP clockdomain from idling while the CORE_L3 clockdomain is active. So we can safely leave the 32k sync timer in target-force-idle mode, even while we continue to access it. This workaround is implemented by defining a new clockdomain flag, CLKDM_ACTIVE_WITH_MPU, that indicates that the clockdomain is guaranteed to be active whenever the MPU is inactive. If an IP block's main functional clock exists inside this clockdomain, and the IP block does not support smart-idle modes, then the hwmod code will place the IP block into target force-idle mode even when enabled. The WKUP clockdomains on OMAP3/4 are marked with this flag. (On OMAP2xxx, no OCP header existed on the 32k sync timer.) Other clockdomains also should be marked with this flag, but those changes are deferred until a later merge window, to create a minimal fix. Another theoretically clean fix for this problem would be to implement PM runtime-based control for 32k sync timer accesses. These PM runtime calls would need to located in a custom clocksource, since the 32k sync timer is currently used as an MMIO clocksource. But in practice, there would be little benefit to doing so; and there would be some cost, due to the addition of unnecessary lines of code and the additional CPU overhead of the PM runtime and hwmod code - unnecessary in this case. Another possible fix would have been to modify the pm34xx.c code to force the IP block idle before entering WFI. But this would not have been an acceptable approach: we are trying to remove this type of centralized IP block idle control from the PM code. This patch is a collaboration between Kevin Hilman <khilman@ti.com> and Paul Walmsley <paul@pwsan.com>. Thanks to Vaibhav Hiremath <hvaibhav@ti.com> for providing comments on an earlier version of this patch. Thanks to Tero Kristo <t-kristo@ti.com> for identifying a bug in an earlier version of this patch. Thanks to Benoît Cousson <b-cousson@ti.com> for identifying some bugs in several versions of this patch and for implementation comments. References: 1. Table 16-96 "REG_32KSYNCNT_SYSCONFIG" of the OMAP34xx TRM Rev. ZU (SWPU223U), available from: http://www.ti.com/pdfs/wtbu/OMAP34x_ES3.1.x_PUBLIC_TRM_vzU.zip 2. Table 4-72 "Sleep Dependencies" of the OMAP34xx TRM Rev. ZU (SWPU223U) 3. ibid. Cc: Tony Lindgren <tony@atomide.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-07-05Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Small fixes on multiple ARM platforms - A build regression from a previous fix on dove and mv78xx0 - Two fixes for recently (3.5-rc1) changed mmp/pxa code - multiple omap2+ bug fixes - two trivial fixes for i.MX - one v3.5 regression for mxs" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: apx4devkit: fix FEC enabling PHY clock ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4 ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks ARM: Orion: Fix WDT compile for Dove and MV78xx0 ARM: mmp: remove mach/gpio-pxa.h ARM: imx: assert SCC gate stays enabled ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure ARM: imx27_visstrim_m10: Do not include <asm/system.h> ARM: pxa: hx4700: Fix basic suspend/resume
2012-07-05ARM: fix warning caused by wrongly typed arm_dma_limitRussell King
arch/arm/mm/init.c: In function 'arm_memblock_init': arch/arm/mm/init.c:380: warning: comparison of distinct pointer types lacks a cast by fixing the typecast in its definition when DMA_ZONE is disabled. This was missed in 4986e5c7c (ARM: mm: fix type of the arm_dma_limit global variable). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: fix warnings about atomic64_readRussell King
Fix: net/netfilter/xt_connbytes.c: In function 'connbytes_mt': net/netfilter/xt_connbytes.c:43: warning: passing argument 1 of 'atomic64_read' discards qualifiers from pointer target type ... by adding the missing const. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6Rabin Vincent
'sub pc, pc, #1b-2b+8-2' results in address<1:0> == '10'. sub pc, pc, #const (== ADR pc, #const) performs an interworking branch (BXWritePC()) on ARMv7+ and a simple branch (BranchWritePC()) on earlier versions. In ARM state, BXWritePC() is UNPREDICTABLE when address<1:0> == '10'. In ARM state on ARMv6+, BranchWritePC() ignores address<1:0>. Before ARMv6, BranchWritePC() is UNPREDICTABLE if address<1:0> != '00' So the instruction is UNPREDICTABLE both before and after v6. Acked-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05Merge tag 'omap-fixes-for-v3.5-rc5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes PM related fixes for omaps mostly to get suspend/resume working again. * tag 'omap-fixes-for-v3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4 ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-05Merge branch 'mxs/fixes-for-3.5' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes * 'mxs/fixes-for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: apx4devkit: fix FEC enabling PHY clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-05ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailableWill Deacon
We currently return -EPERM if the user requests mode exclusion that is not supported by the CPU. This looks pretty confusing from userspace and is inconsistent with other architectures (ppc, x86). This patch returns -EOPNOTSUPP instead. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK"Will Deacon
This reverts commit 6b5c8045ecc7e726cdaa2a9d9c8e5008050e1252. Conflicts: arch/arm/kernel/ptrace.c The new syscall restarting code can lead to problems if we take an interrupt in userspace just before restarting the svc instruction. If a signal is delivered when returning from the interrupt, the TIF_SYSCALL_RESTARTSYS will remain set and cause any syscalls executed from the signal handler to be treated as a restart of the previously interrupted system call. This includes the final sigreturn call, meaning that we may fail to exit from the signal context. Furthermore, if a system call made from the signal handler requires a restart via the restart_block, it is possible to clear the thread flag and fail to restart the originally interrupted system call. The right solution to this problem is to perform the restarting in the kernel, avoiding the possibility of handling a further signal before the restart is complete. Since we're almost at -rc6, let's revert the new method for now and aim for in-kernel restarting at a later date. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: 7442/1: Revert "remove unused restart trampoline"Will Deacon
This reverts commit fa18484d0947b976a769d15c83c50617493c81c1. We need the restart trampoline back so that we can revert a related problematic patch 6b5c8045ecc7e726cdaa2a9d9c8e5008050e1252 ("arm: new way of handling ERESTART_RESTARTBLOCK"). Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05ARM: fix set_domain() macroRussell King
Avoid polluting drivers with a set_domain() macro, which interferes with structure member names: drivers/net/wireless/ath/ath9k/dfs_pattern_detector.c:294:33: error: macro "set_domain" passed 2 arguments, but takes just 1 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-05Merge tag 'omap-fixes-b-for-3.5rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes A few more OMAP fixes for 3.5-rc. These fix some bugs with power management and McBSP.
2012-07-05ARM: apx4devkit: fix FEC enabling PHY clockLauri Hintsala
Ethernet stopped to work after mxs clk framework change. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-04ARM: fix mach-versatile/pci.c warningRussell King
arch/arm/mach-versatile/pci.c: In function 'versatile_map_irq': arch/arm/mach-versatile/pci.c:342: warning: unused variable 'devslot' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-04ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4Benoit Cousson
The commit 503d0ea24d1d3dd3db95e5e0edd693da7a2a23eb ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocks added a wrong "prcm_clk" alias for PRCM clock whereas the McBSP driver and previous OMAPs are using "prcm_fck". It thus lead to the following warning. [ 47.409729] omap-mcbsp: clks: could not clk_get() prcm_fck Fix that by changing the opt_clk role to prcm_fck. Reported-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-07-04ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and ↵Paul Walmsley
aess IP blocks The OMAP4 usb_host_fs (OHCI) and AESS IP blocks require some special programming for them to enter idle. Without this programming, they will prevent the rest of the chip from entering full chip idle. To implement the idle programming cleanly, this will take some coordination between maintainers. This is likely to take some time, so it is probably best to leave this for 3.6 or 3.7. So, in the meantime, prevent these IP blocks from being registered. Later, once the appropriate support is available, this patch can be reverted. This second version comments out the IP block data since Benoît didn't like removing it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-07-04Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesArnd Bergmann
From Haojian Zhuang <haojian.zhuang@gmail.com>: * 'fixes' of git://github.com/hzhuang1/linux: ARM: mmp: remove mach/gpio-pxa.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-04Merge tag 'v3.5-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into fixes From Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX fixes for v3.5-rc5 * tag 'v3.5-imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: assert SCC gate stays enabled ARM: imx27_visstrim_m10: Do not include <asm/system.h> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-04ARM: Orion: Fix WDT compile for Dove and MV78xx0Andrew Lunn
Commit 0fa1f0609a0c1fe8b2be3c0089a2cb48f7fda521 (ARM: Orion: Fix Virtual/Physical mixup with watchdog) broke the Dove & MV78xx0 build. Although these two SoC don't use the watchdog, the shared platform code still needs to build. Add the necessary defines. Cc: stable@vger.kernel.org Reported-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-04ARM: mmp: remove mach/gpio-pxa.hPaul Bolle
Commit 157d2644cb0c1e71a18baaffca56d2b1d0ebf10f ("ARM: pxa: change gpio to platform device") removed all includes of mach/gpio-pxa.h. It kept this unused header in the tree. Using it can't work, as it itself includes the non-existent header plat/gpio-pxa.h. This header can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-07-04ARM: imx: assert SCC gate stays enabledUwe Kleine-König
The SCC clock is needed in internal boot mode and so must keep enabled. This same issue was fixed for the pre-common-clk code in commit 3d6e614 (mx35: Fix boot ROM hang in internal boot mode) Cc: John Ogness <jogness@linutronix.de> Cc: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-02ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabledKevin Hilman
The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on OMAP4430/Panda. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failureKevin Hilman
In order for suspend/resume dependencies to work correctly, I2C has to be initialized (more specifically, registered with the driver core) before MMC. Without this, the MMC driver fails to adjust the VMMC regulator (using i2c writes) during the suspend path. Problem found testing suspend/resume on 3730/OveroSTORM platform. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-02ARM: imx27_visstrim_m10: Do not include <asm/system.h>Fabio Estevam
commit 435ca24 (ARM i.MX: Visstrim_M10: Add board version detection) included <asm/system.h>, which is a header file about to be deleted according to 9f97da (Disintegrate asm/system.h for ARM) Include <asm/system_info.h> instead. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-24 19:17:06 +0000