aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2015-12-13Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlets from Thomas Gleixner: "Two trivial fixes which add missing header fileas and forward declarations so the code will compile even when the magic include chains are different" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing include for barrier.h irqchip/gic-v3: Add missing struct device_node declaration
2015-12-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a bunch of small bug fixes for various ARM platforms, nothing really sticks out this week, most of either fixes bugs in code that was just added in 4.4, or that has been broken for many years without anyone noticing. at91/sama5d2: - fix sama5de hardware setup of sd/mmc interface - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2 berlin: - fix incorrect clock input for SDIO exynos: - Fix potential NULL pointer dereference in Exynos PMU driver. imx: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. ixp4xx: - fix prototypes for readl/writel functions ls2080a: - use little-endian register access for GPIO and SDHCI omap: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable pxa: - use PWM lookup table for all ezx machines s3c24xx: - Remove incorrect __init annotation from s3c24xx cpufreq driver structures. versatile: - fix PCI IRQ mapping on Versatile PB" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
2015-12-11Merge tag 'imx-fixes-4.4-2' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 4.4, 2nd round" from Shawn Guo: The i.MX fixes for 4.4, 2nd round: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. * tag 'imx-fixes-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: vf610: use reset values for L2 cache latencies ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree
2015-12-11ARM: dts: vf610: use reset values for L2 cache latenciesStefan Agner
Linux on Vybrid used several different L2 latencies so far, none of them seem to be the right ones. According to the application note AN4947 ("Understanding Vybrid Architecture"), the tag portion runs on CPU clock and is inside the L2 cache controller, whereas the data portion is stored in the external SRAM running on platform clock. Hence it is likely that the correct value requires a higher data latency then tag latency. These are the values which have been used so far: - The mainline values: arm,data-latency = <1 1 1>; arm,tag-latency = <2 2 2>; Those values have lead to problems on higher clocks. They look like a poor translation from the reset values (missing +1 offset and a mix up between tag/latency values). - The Linux 3.0 (SoC vendor BSP) values (converted to DT notation): arm,data-latency = <4 2 3> arm,tag-latency = <4 2 3> The cache initialization function along with the value matches the i.MX6 code from the same kernel, so it seems that those values have just been copied. - The Colibri values: arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; Those were a mix between the values of the Linux 3.0 based BSP and the mainline values above. - The SoC Reset values (converted to DT notation): arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; So far there is no official statement on what the correct values are. See also the related Freescale community thread: https://community.freescale.com/message/579785#579785 For now, the reset values seem to be the best bet. Remove all other "bogus" values and use the reset value on vf610.dtsi level. Signed-off-by: Stefan Agner <stefan@agner.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-11Merge tag 'omap-for-v4.4/fixes-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.4-rc4" from Tony Lindgren Few fixes for omaps for v4.4-rc cycle: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable * tag 'omap-for-v4.4/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: fix clock source for arm twd and global timers ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells
2015-12-11ARM: pxa: use PWM lookup table for all machinesArnd Bergmann
The recent change to use a pwm lookup table for the ezx machines was incomplete and only changed the a780 model, but not the other ones in the same file. This adds the missing calls to pwm_add_table(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c3322022897c ("ARM: pxa: ezx: Use PWM lookup table") Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-12-11Merge tag 'berlin-fixes-for-4.4-rc1-1' of ↵Arnd Bergmann
git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "Marvell Berlin fixes for 4.4-rc1 (round 1)" from Sebastian Hesselbarth: - fix wrong SDIO DT clocks on BG2Q * tag 'berlin-fixes-for-4.4-rc1-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
2015-12-11Merge tag 'at91-4.4-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Merge "Second fixes for 4.4" from Alexandre Belloni: - fix of a hardware setup that prevents the sd/mmc interface to show up on sama5d2. - proper selection of pinctrl drivers. PIO4 is necessary for the sama5d2 to boot. * tag 'at91-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator
2015-12-11Merge tag 'samsung-fixes-4.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Merge "Fixes for Exynos" from Krzysztof Kozlowski: 1. Fix potential NULL pointer dereference in Exynos PMU driver. 2. Remove incorrect __init annotation from s3c24xx cpufreq driver structures. * tag 'samsung-fixes-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
2015-12-10ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1Jisheng Zhang
We removed CLK_IGNORE_UNUSED from CLKID_SDIO's flag, so the sdhci0 and sdhci1 don't work. We fix this by adding the optional 2nd clock for BG2Q's sdhci0 and sdhci1. This patch brings another benefit: the 2nd clock can be disabled during runtime pm, so saves power a bit. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-12-10ARM: dts: berlin: correct BG2Q's sdhci2 2nd clockJisheng Zhang
The optional 2nd clock is CLKID_SDIO. We removed CLK_IGNORE_UNUSED from CLKID_SDIO's flag, so the sdhci2 doesn't work. This patch fixes this issue by correcting the sdhci2's 2nd clock. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-12-10irqchip/gic-v3: Add missing include for barrier.hMarc Zyngier
Both the 32bit and 64bit versions of the GICv3 header file are using barriers, but neglect to include barrier.h, leading to an interesting splat in some circumstances. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1449483072-17694-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-09ARM: dts: am4372: fix clock source for arm twd and global timersGrygorii Strashko
ARM TWD and Global timer are clocked by PERIPHCLK which is MPU_CLK/2. But now they are clocked by dpll_mpu_m2_ck == MPU_CLK and, as result. Timekeeping core misbehaves. For example, execution of command "sleep 5" will take 10 sec instead of 5. Hence, fix it by adding mpu_periphclk ("fixed-factor-clock") and use it for clocking ARM TWD and Global timer (same way as on OMAP4). Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Fixes:commit 8cbd4c2f6a99 ("arm: boot: dts: am4372: add ARM timers and SCU nodes") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull ARM KVM fixes from Paolo Bonzini: - a series of fixes to deal with the aliasing between the sp and xzr register - a fix for the cache flush fix that went in -rc3 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: ARM/arm64: KVM: correct PTE uncachedness check arm64: KVM: Get rid of old vcpu_reg() arm64: KVM: Correctly handle zero register in system register accesses arm64: KVM: Remove const from struct sys_reg_params arm64: KVM: Correctly handle zero register during MMIO
2015-12-04ARM: at91: fix pinctrl driver selectionLudovic Desroches
Move the selection of the pinctrl driver to SoC family level since we have two pinctrl drivers. It is useless to select one which is not compatible with the SoC. [abelloni: fixed pm.c when only sama2d2 is selected] Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-04Merge tag 'kvm-arm-for-v4.4-rc4' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for v4.4-rc4 - A series of fixes to deal with the aliasing between the sp and xzr register - A fix for the cache flush fix that went in -rc3
2015-12-04ARM: at91/dt: add always-on to 1.8V regulatorNicolas Ferre
As the SDHCI controller needs the 1.8V line to be always enabled for some eMMC configurations, set the proper "regulator-always-on" property to the board DTS files. Note that the sdhci classical regulator definitions doesn't suit our controller for this 1.8V purpose. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-04ARM/arm64: KVM: correct PTE uncachedness checkArd Biesheuvel
Commit e6fab5442345 ("ARM/arm64: KVM: test properly for a PTE's uncachedness") modified the logic to test whether a HYP or stage-2 mapping needs flushing, from [incorrectly] interpreting the page table attributes to [incorrectly] checking whether the PFN that backs the mapping is covered by host system RAM. The PFN number is part of the output of the translation, not the input, so we have to use pte_pfn() on the contents of the PTE, not __phys_to_pfn() on the HYP virtual address or stage-2 intermediate physical address. Fixes: e6fab5442345 ("ARM/arm64: KVM: test properly for a PTE's uncachedness") Cc: stable@vger.kernel.org Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04arm64: KVM: Get rid of old vcpu_reg()Pavel Fedin
Using oldstyle vcpu_reg() accessor is proven to be inappropriate and unsafe on ARM64. This patch converts the rest of use cases to new accessors and completely removes vcpu_reg() on ARM64. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-04arm64: KVM: Correctly handle zero register during MMIOPavel Fedin
On ARM64 register index of 31 corresponds to both zero register and SP. However, all memory access instructions, use ZR as transfer register. SP is used only as a base register in indirect memory addressing, or by register-register arithmetics, which cannot be trapped here. Correct emulation is achieved by introducing new register accessor functions, which can do special handling for reg_num == 31. These new accessors intentionally do not rely on old vcpu_reg() on ARM64, because it is to be removed. Since the affected code is shared by both ARM flavours, implementations of these accessors are also added to ARM32 code. This patch fixes setting MMIO register to a random value (actually SP) instead of zero by something like: *((volatile int *)reg) = 0; compilers tend to generate "str wzr, [xx]" here [Marc: Fixed 32bit splat] Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A lot of Thanksgiving turkey leftovers accumulated, here goes: 1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg. 2) IDs for some new iwlwifi chips, from Oren Givon. 3) Fix rtlwifi lockups on boot, from Larry Finger. 4) Fix memory leak in fm10k, from Stephen Hemminger. 5) We have a route leak in the ipv6 tunnel infrastructure, fix from Paolo Abeni. 6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim. 7) Wrong lockdep annotations in tcp md5 support, fix from Eric Dumazet. 8) Work around some middle boxes which prevent proper handling of TCP Fast Open, from Yuchung Cheng. 9) TCP repair can do huge kmalloc() requests, build paged SKBs instead. From Eric Dumazet. 10) Fix msg_controllen overflow in scm_detach_fds, from Daniel Borkmann. 11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from Nikolay Aleksandrov. 12) Fix use after free in epoll with AF_UNIX sockets, from Rainer Weikusat. 13) Fix double free in VRF code, from Nikolay Aleksandrov. 14) Fix skb leaks on socket receive queue in tipc, from Ying Xue. 15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian. 16) Fix clearing of persistent array maps in bpf, from Daniel Borkmann. 17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq early enough. From Eric Dumazet. 18) Fix out of bounds accesses in bpf array implementation when updating elements, from Daniel Borkmann. 19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric Dumazet. 20) When dumping proxy neigh entries, we have to accomodate NULL device pointers properly, from Konstantin Khlebnikov. 21) SCTP doesn't release all ipv6 socket resources properly, fix from Eric Dumazet. 22) Prevent underflows of sch->q.qlen for multiqueue packet schedulers, also from Eric Dumazet. 23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey Huang and Michael Chan. 24) Don't actively scan radar channels, from Antonio Quartulli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits) net: phy: reset only targeted phy bnxt_en: Setup uc_list mac filters after resetting the chip. bnxt_en: enforce proper storing of MAC address bnxt_en: Fixed incorrect implementation of ndo_set_mac_address net: lpc_eth: remove irq > NR_IRQS check from probe() net_sched: fix qdisc_tree_decrease_qlen() races openvswitch: fix hangup on vxlan/gre/geneve device deletion ipv4: igmp: Allow removing groups from a removed interface ipv6: sctp: implement sctp_v6_destroy_sock() arm64: bpf: add 'store immediate' instruction ipv6: kill sk_dst_lock ipv6: sctp: add rcu protection around np->opt net/neighbour: fix crash at dumping device-agnostic proxy entries sctp: use GFP_USER for user-controlled kmalloc sctp: convert sack_needed and sack_generation to bits ipv6: add complete rcu protection around np->opt bpf: fix allocation warnings in bpf maps and integer overflow mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 net: mvneta: enable setting custom TX IP checksum limit net: mvneta: fix error path for building skb ...
2015-12-02mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0Marcin Wojtas
The Ethernet controller found in the Armada 38x SoC's family support TCP/IP checksumming with frame sizes larger than 1600 bytes, however only on port 0. This commit enables it by setting 'tx-csum-limit' to 9800B in 'ethernet@70000' node. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02ARM: dts: vf610: fix clock definition for SAI2Stefan Agner
So far, only the bus clock has been assigned, but in reality the SAI IP has for clock inputs. The driver has been updated to make use of the additional clock inputs by c3ecef21c3f2 ("ASoC: fsl_sai: add sai master mode support"). Due to a bug in the clock tree, the audio clock has been enabled none the less by the specified bus clock (see "ARM: imx: clk-vf610: fix SAI clock tree"), which made master mode even without the proper clock assigned working. This patch completes the clock definition for SAI2. On Vybrid, only two MCLK out of the four options are available (the first being the bus clock itself). See chapter 8.10.1.2.3 of the Vybrid Reference manual ("SAI transmitter and receiver options for MCLK selection"). Note: The audio clocks are only required in master mode. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-01ARM: ixp4xx: fix read{b,w,l} return typesArnd Bergmann
On ixp4xx, the readl() function returns an 'unsigned long' output when indirect I/O is used. This is unlike any other platform, and it causes lots of harmless compiler warnings, such as: drivers/ata/libahci.c: In function 'ahci_show_host_version': drivers/ata/libahci.c:254:22: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat=] drivers/block/mtip32xx/mtip32xx.c: In function 'mtip_hw_read_registers': drivers/block/mtip32xx/mtip32xx.c:2602:31: warning: format '%X' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat=] drivers/block/cciss.c: In function 'print_cfg_table': drivers/block/cciss.c:3845:25: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] This changes all six of the ixp4xx specific I/O read functions to return the same types that we have in the normal asm/io.h, to avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2015-11-30ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGEGrygorii Strashko
Enable REGULATOR_FIXED_VOLTAGE for all OMAP2+ platforms otherwise system can't boot from SD-card when kernel is built for single SoC (for example, with CONFIG_SOC_DRA7XX=y only). It's also required for almost all TI SoC's platforms. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30ARM: dts: add dm816x missing spi DT dma handlesNeil Armstrong
Add the missing SPI controller DMA handler in the dm816x DT node, only properties for the two channels on four were present. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30ARM: dts: add dm816x missing #mbox-cellsNeil Armstrong
Add missing #mbox-cells for dm816x mbox DT node. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-29Merge tag 'rtc-4.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Two fixes for the ds1307 alarm and wakeup" * tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix alarm reading at probe time rtc: ds1307: fix kernel splat due to wakeup irq handling
2015-11-29Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Just two changes this time around: - wire up the new mlock2 syscall added during the last merge window - fix a build problem with certain configurations provoked by making CONFIG_OF user selectable" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8454/1: OF implies OF_FLATTREE ARM: wire up mlock2 syscall
2015-11-28ARM: 8454/1: OF implies OF_FLATTREEArnd Bergmann
On the ARM architecture, individual platforms select CONFIG_USE_OF if they need it, but all device tree code is keyed off CONFIG_OF. When building a platform without DT support and manually enabling CONFIG_OF, we now get a number of build errors, e.g. arch/arm/kernel/devtree.c: In function 'setup_machine_fdt': arch/arm/kernel/devtree.c:215:19: error: implicit declaration of function 'early_init_dt_verify' [-Werror=implicit-function-declaration] We could now try to separate the use case of booting from DT vs. the case of using the dynamic implementation, but that seems more complicated than it can gain us. This simply changes the ARM Kconfig file to always enable OF_RESERVED_MEM and OF_EARLY_FLATTREE when CONFIG_OF is enabled. These options add a little extra code when we just want the dynamic OF implementation, but that seems like a rather obscure case, and this version solves all CONFIG_OF related randconfig regressions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0166dc11be91 ("of: make CONFIG_OF user selectable") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-11-28Merge tag 'pci-v4.4-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes I'd like to have in v4.4: a generic one for sysfs and three for HiSilicon and DesignWare host controllers. Summary: NUMA: - Prevent out of bounds access in numa_node override (Mathias Krause) HiSilicon host bridge driver: - Fix deferred probing (Arnd Bergmann) Synopsys DesignWare host bridge driver: - Remove incorrect io_base assignment (Stanimir Varbanov) - Move align_resource function pointer to pci_host_bridge structure (Gabriele Paoloni)" * tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ARM/PCI: Move align_resource function pointer to pci_host_bridge structure PCI: hisi: Fix deferred probing PCI: designware: Remove incorrect io_base assignment PCI: Prevent out of bounds access in numa_node override
2015-11-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "There is a small backlog of at91 patches here, the most significant is the addition of some sama5d2 Xplained nodes that were waiting on an MFD include file to get merged through another tree. We normally try to sort those out before the merge window opens, but the maintainer wasn't aware of that here and I decided to merge the changes this time as an exception. On OMAP a series of audio changes for dra7 missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to get audio working. The other changes are the usual simple changes, here is a list sorted by platform: at91: removal of a useless defconfig option removal of some legacy DT pieces use of the proper watchdog compatible string update of the MAINTAINERS entries for some Atmel drivers drivers/scpi: hide get_scpi_ops in module from built-in code imx: add missing .irq_set_type for i.MX GPC irq_chip. fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. fix a merge error in Vybrid dts regarding to ADC device property keystone: fix the optional PDSP firmware loading fix linking RAM setup for QMs fix crash with clk_ignore_unused mediatek: Enable SCPSYS power domain driver by default mvebu: fix QNAP TS219 power-off in dts fix legacy get_irqnr_and_base for dove and orion5x omap: fix l4 related boot time errors for dm81xx use lockless cldm/pwrdm api in omap4_boot_secondary remove t410 abort handler to avoid hiding other critical errors mark cpuidle tracepoints as _rcuidle fix module alias for omap-ocp2scp pxa: palm: Fix typos in PWM lookup table code renesas: missing __initconst annotation for r8a7793_boards_compat_dt rockchip: disable mmc-tuning on the veyron-minnie board adding the init state for the over-temperature-protection zx: only build power domain code when CONFIG_PM=y" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base soc: Mediatek: Enable SCPSYS power domain driver by default ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node ARM: shmobile: r8a7793: proper constness with __initconst scpi: hide get_scpi_ops in module from built-in code ARM: zx: only build power domain code when CONFIG_PM=y ARM: pxa: palm: Fix typos in PWM lookup table code ARM: dts: Kirkwood: Fix QNAP TS219 power-off ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie MAINTAINERS: Atmel drivers: change NAND and ISI entries ARM: at91/dt: sama5d2 Xplained: add several devices ...
2015-11-27Merge tag 'v4.4-rockchip-dts32-fixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: devicetree fixes for 4.4" from Heiko Stuebner: Two fixes to Rockchip devicetree files, disabling the mmc-tuning on the veyron-minnie board for now and adding the init state for the over-temperature-protection to prevent glitches making the system reboot sometimes. * tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie
2015-11-27Merge tag 'mvebu-fixes-4.4-1' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.4 (part 1)" from Jason Cooper: - Fix QNAP TS219 power-off in dts - Fix legacy get_irqnr_and_base for dove and orion5x * tag 'mvebu-fixes-4.4-1' of git://git.infradead.org/linux-mvebu: ARM: orion5x: Fix legacy get_irqnr_and_base ARM: dove: Fix legacy get_irqnr_and_base ARM: dts: Kirkwood: Fix QNAP TS219 power-off
2015-11-27Merge tag 'renesas-fixes-for-v4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.4" from Simon Horman: * r8a7793 SoC: Annotate r8a7793_boards_compat_dt with __initconst Aside from being correct this builds that otherwise fail with section mismatch errors. * tag 'renesas-fixes-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7793: proper constness with __initconst
2015-11-27cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __initArnd Bergmann
s3c2410_plls_add is a device notifier that may be called at runtime and is correctly not marked __init. However it calls s3c_plltab_register() which is marked __init, and that triggers a build error when we are checking for section mismatches: WARNING: vmlinux.o(.text+0x195e0): Section mismatch in reference from the function s3c2410_plls_add() to the function .init.text:s3c_plltab_register() The function s3c2410_plls_add() references the function __init s3c_plltab_register(). This is often because s3c2410_plls_add lacks a __init annotation or the annotation of s3c_plltab_register is wrong. This removes the __init annotation from s3c2410_plls_add as well as the __initdata section annotations from s3c2440_plls_12 and s3c2440_plls_169344, which in turn are referenced from s3c2410_plls_add. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-26Merge tag 'for-linus-4.4-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix gntdev and numa balancing. - Fix x86 boot crash due to unallocated legacy irq descs. - Fix overflow in evtchn device when > 1024 event channels. * tag 'for-linus-4.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/evtchn: dynamically grow pending event channel ring xen/events: Always allocate legacy interrupts on PV guests xen/gntdev: Grant maps should not be subject to NUMA balancing
2015-11-26xen/events: Always allocate legacy interrupts on PV guestsBoris Ostrovsky
After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-25Merge tag 'omap-for-v4.4/fixes-rc2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Fixes for omaps for v4.4-rc cycle" from Tony Lindgren: - A series of audio changes for dra7 that missed the merge window but turned out to be necessary to fix a boot time imprecise external abort error and to getaudio working - Fix l4 related boot time errors for dm81xx - Use lockless cldm/pwrdm api in omap4_boot_secondary - Remove t410 custom abort handler that is no longer needed and may hide other critical errors - Mark cpuidle tracepoints as _rcuidle - Fix module alias for omap-ocp2scp * tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data ARM: OMAP2+: remove custom abort handler for t410 ARM: OMAP: DRA7: hwmod: Add data for McASP3 ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED ARM: dts: dra7: Fix McASP3 node regarding to clocks bus: omap-ocp2scp: Fix module alias ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle()
2015-11-25Merge tag 'keystone-fixes-for-4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Merge "Few Keystone fixes for 4.4-rcx" from Santosh Shilimkar: - Fix the optional PDSP firmware loading - Fix linking RAM setup for QMs - Fix crash with clk_ignore_unused * tag 'keystone-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional
2015-11-25Merge tag 'v4.4-rc2' into fixesArnd Bergmann
Linux 4.4-rc2 is backmerged from the keystone fixes.
2015-11-25Merge tag 'imx-fixes-4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "The i.MX fixes for 4.4" from Shawn Guo: - Add missing .irq_set_type for i.MX GPC irq_chip. It fixes an issue that device IRQ type setting doesn't match the one specified in device tree, since stacked IRQ domain is adopted in GPC driver. - Fix the wrong spi-num-chipselects settings for Vybrid DSPI devices. - Fix a merge error in Vybrid dts regarding to ADC device property fsl,adck-max-frequency * tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects. ARM: imx: add platform irq type setting in gpc ARM: dts: vfxxx: Fix erroneous property in esdhc0 node
2015-11-25ARM/PCI: Move align_resource function pointer to pci_host_bridge structureGabriele Paoloni
Commit b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer") introduced an ARM-specific align_resource() function pointer. This is not portable to other arches and doesn't work for platforms with two different PCIe host bridge controllers. Move the function pointer to the pci_host_bridge structure so each host bridge driver can specify its own align_resource() function. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-25ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondaryGrygorii Strashko
OMAP CPU hotplug uses cpu1's clocks and power domains for CPU1 wake up from low power states (or turn on CPU1). This part of code is also part of system suspend (disable_nonboot_cpus()). >From other side, cpu1's clocks and power domains are used by CPUIdle. All above functionality is mutually exclusive and, therefore, lockless clkdm/pwrdm api can be used in omap4_boot_secondary(). This fixes below back-trace on -RT which is triggered by pwrdm_lock/unlock(): BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 0, pid: 118, name: sh 9 locks held by sh/118: #0: (sb_writers#4){.+.+.+}, at: [<c0144a6c>] vfs_write+0x13c/0x164 #1: (&of->mutex){+.+.+.}, at: [<c01b4c70>] kernfs_fop_write+0x48/0x19c #2: (s_active#24){.+.+.+}, at: [<c01b4c78>] kernfs_fop_write+0x50/0x19c #3: (device_hotplug_lock){+.+.+.}, at: [<c03cbff0>] lock_device_hotplug_sysfs+0xc/0x4c #4: (&dev->mutex){......}, at: [<c03cd284>] device_online+0x14/0x88 #5: (cpu_add_remove_lock){+.+.+.}, at: [<c003af90>] cpu_up+0x50/0x1a0 #6: (cpu_hotplug.lock){++++++}, at: [<c003ae48>] cpu_hotplug_begin+0x0/0xc4 #7: (cpu_hotplug.lock#2){+.+.+.}, at: [<c003aec0>] cpu_hotplug_begin+0x78/0xc4 #8: (boot_lock){+.+...}, at: [<c002b254>] omap4_boot_secondary+0x1c/0x178 Preemption disabled at:[< (null)>] (null) CPU: 0 PID: 118 Comm: sh Not tainted 4.1.12-rt11-01998-gb4a62c3-dirty #137 Hardware name: Generic DRA74X (Flattened Device Tree) [<c0017574>] (unwind_backtrace) from [<c0013be8>] (show_stack+0x10/0x14) [<c0013be8>] (show_stack) from [<c05a8670>] (dump_stack+0x80/0x94) [<c05a8670>] (dump_stack) from [<c05ad158>] (rt_spin_lock+0x24/0x54) [<c05ad158>] (rt_spin_lock) from [<c0030dac>] (clkdm_wakeup+0x10/0x2c) [<c0030dac>] (clkdm_wakeup) from [<c002b2c0>] (omap4_boot_secondary+0x88/0x178) [<c002b2c0>] (omap4_boot_secondary) from [<c0015d00>] (__cpu_up+0xc4/0x164) [<c0015d00>] (__cpu_up) from [<c003b09c>] (cpu_up+0x15c/0x1a0) [<c003b09c>] (cpu_up) from [<c03cd2d4>] (device_online+0x64/0x88) [<c03cd2d4>] (device_online) from [<c03cd360>] (online_store+0x68/0x74) [<c03cd360>] (online_store) from [<c01b4ce0>] (kernfs_fop_write+0xb8/0x19c) [<c01b4ce0>] (kernfs_fop_write) from [<c0144124>] (__vfs_write+0x20/0xd8) [<c0144124>] (__vfs_write) from [<c01449c0>] (vfs_write+0x90/0x164) [<c01449c0>] (vfs_write) from [<c01451e4>] (SyS_write+0x44/0x9c) [<c01451e4>] (SyS_write) from [<c0010240>] (ret_fast_syscall+0x0/0x54) CPU1: smp_ops.cpu_die() returned, trying to resuscitate Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-25Merge branch '81xx' into omap-for-v4.4/fixesTony Lindgren
2015-11-25arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod dataNeil Armstrong
Add missing HWMOD_NO_IDLEST hwmod flag for entries not having omap4 clkctrl values. The emac0 hwmod flag fixes the davinci_emac driver probe since the return of pm_resume() call is now checked. This solves the following boot errors : [ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16 [ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3) [ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16 [ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3) [ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16 Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-25ARM: orion5x: Fix legacy get_irqnr_and_baseNicolas Pitre
Commit 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") shifted IRQ numbers by one but didn't update the get_irqnr_and_base macro accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER is not defined. [jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18] Signed-off-by: Nicolas Pitre <nico@linaro.org> Fixes: 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-25ARM: dove: Fix legacy get_irqnr_and_baseNicolas Pitre
Commit 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers") shifted IRQ numbers by one but didn't update the get_irqnr_and_base macro accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER is not defined. [jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18] Signed-off-by: Nicolas Pitre <nico@linaro.org> Fixes: 5d6bed2a9c ("ARM: dove: fix legacy dove IRQ numbers") Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-25rtc: ds1307: fix kernel splat due to wakeup irq handlingFelipe Balbi
Since commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") we have automatic wakeup irq support for i2c devices. That commit missed the fact that rtc-1307 had its own wakeup irq handling and ended up introducing a kernel splat for at least Beagle x15 boards. Fix that by reverting original commit _and_ passing correct interrupt names on DTS so i2c-core can choose correct IRQ as wakeup. Now that we have automatic wakeirq support, we can revert the original commit which did it manually. Fixes the following warning: [ 10.346582] WARNING: CPU: 1 PID: 263 at linux/drivers/base/power/wakeirq.c:43 dev_pm_attach_wake_irq+0xbc/0xd4() [ 10.359244] rtc-ds1307 2-006f: wake irq already initialized Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-24KVM: arm/arm64: Fix preemptible timer active state crazynessChristoffer Dall
We were setting the physical active state on the GIC distributor in a preemptible section, which could cause us to set the active state on different physical CPU from the one we were actually going to run on, hacoc ensues. Since we are no longer descheduling/scheduling soft timers in the flush/sync timer functions, simply moving the timer flush into a non-preemptible section. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>