path: root/arch/arm
AgeCommit message (Collapse)Author
2013-09-10Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...
2013-09-10Merge tag 'mmc-updates-for-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.12: Core: - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB. - The slot-gpio helper can now handle GPIO debouncing card-detect. - Read supported voltages from DT "voltage-ranges" property. Drivers: - dw_mmc: Add support for ARC architecture, and support exynos5420. - mmc_spi: Support CD/RO GPIOs. - sh_mobile_sdhi: Add compatibility for more Renesas SoCs. - sh_mmcif: Add DT support for DMA channels" * tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits) Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data" mmc: dw_mmc: Add support for ARC mmc: sdhci-s3c: initialize host->quirks2 for using quirks2 mmc: sdhci-s3c: fix the wrong register value, when clock is disabled mmc: esdhc: add support to get voltage from device-tree mmc: sdhci: get voltage from sdhc host mmc: core: parse voltage from device-tree mmc: omap_hsmmc: use the generic config for omap2plus devices mmc: omap_hsmmc: clear status flags before starting a new command mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 mmc: sh_mmcif: revision-specific CLK_CTRL2 handling mmc: sh_mmcif: revision-specific Command Completion Signal handling mmc: sh_mmcif: add support for Device Tree DMA bindings mmc: sh_mmcif: move header include from header into .c mmc: SDHI: add DT compatibility strings for further SoCs mmc: dw_mmc-pci: enable bus-mastering mode mmc: dw_mmc-pci: get resources from a proper BAR mmc: tmio-mmc: Remove .set_pwr() callback from platform data mmc: tmio-mmc: Remove .get_cd() callback from platform data mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data ...
2013-09-09ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 buildNicolas Pitre
This fixes the following build error: /tmp/cce439dZ.s: Assembler messages: /tmp/cce439dZ.s:506: Error: selected processor does not support ARM mode `isb ' /tmp/cce439dZ.s:512: Error: selected processor does not support ARM mode `isb ' /tmp/cce439dZ.s:513: Error: selected processor does not support ARM mode `dsb ' /tmp/cce439dZ.s:583: Error: selected processor does not support ARM mode `isb ' /tmp/cce439dZ.s:589: Error: selected processor does not support ARM mode `isb ' /tmp/cce439dZ.s:590: Error: selected processor does not support ARM mode `dsb ' Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge branch 'versatile/fixes' into fixesOlof Johansson
From Peter Maydell: These patches fix a number of issues with the PCI controller code for mach-versatile: (1) The irq mapping matched neither hardware nor QEMU; we correct it to match the hardware, which means it will also work on recent (1.5 or later) QEMU. (2) The code was confused between the PCI I/O window (at 0x43000000) and the first PCI memory window (at 0x44000000), which meant that PCI devices using PCI PIO rather than MMIO didn't work. This is fixed (and some variables/labels are renamed to avoid further confusion in future). (3) The SMAP register offsets were all off-by-four, though by fluke this didn't actually have any ill effects. All these changes have been tested on real hardware (PB926 plus the PCI backplane), as well as on QEMU. I have confirmed that IRQs and PCI PIO and MMIO work OK. PCI bus-master DMA doesn't seem to work on h/w -- as far as I can tell the device is correctly managing to DMA to the right places in memory, but every other 32 bit word is corrupt (at least judging from rtl8139 debug dumps of the frames it's receiving). I'm not sure what's going on here, but since this is disjoint from the irq and I/O issues I don't think that applying the patches that fix those should be stalled on trying to debug DMA problems. (DMA works fine on QEMU, incidentally.) * versatile/fixes: ARM: PCI: versatile: Fix SMAP register offsets ARM: PCI: versatile: Fix PCI I/O ARM: PCI: versatile: Fix map_irq function to match hardware Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_dataSimon Horman
As of 8d3214c ("sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'") is is no longer necessary or correct to use the 'register_type' field from 'struct sh_eth_plat_data' and doing so results in a build error. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge tag 'renesas-fixes3-for-v3.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Third Round of Renesas ARM based SoC fixes for v3.12 * Update early timer initialisation order of r8a7779 SoC This resolves a regression introduced by a894fcc2d01a89e6fe3da0845a4d80a5312e1124 ("ARM: smp_twd: Divorce smp_twd from local timer API"). This problem was introduced in v3.10-rc2. * tag 'renesas-fixes3-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: Update early timer initialisation order Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09ARM: pxa: ssp: Check return values from phandle lookupsOlof Johansson
Commit a6e56c28a178cef5f (ARM: pxa: ssp: add DT bindings) causes warnings when built: arch/arm/plat-pxa/ssp.c: In function 'pxa_ssp_probe': arch/arm/plat-pxa/ssp.c:145:17: warning: 'dma_spec.args[0]' may be used uninitialized in this function [-Wmaybe-uninitialized] Resolve by checking return values and aborting when lookups fail. Cc: Daniel Mack <zonque@gmail.com> Cc: Mark Brown <broonie@linaro.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge tag 'late-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
2013-09-09Merge tag 'renesas-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-09-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver update from Kevin Hilman: "This contains the ARM SoC related driver updates for v3.12. The only thing this cycle are core PM updates and CPUidle support for ARM's TC2 big.LITTLE development platform" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()
2013-09-09Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
2013-09-09Merge branch 'for-v3.12' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA mapping update from Marek Szyprowski: "This contains an addition of Device Tree support for reserved memory regions (Contiguous Memory Allocator is one of the drivers for it) and changes required by the KVM extensions for PowerPC architectue" * 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: init: add support for reserved memory defined by device tree drivers: of: add initialization code for dma reserved memory drivers: of: add function to scan fdt nodes given by path drivers: dma-contiguous: clean source code and prepare for device tree
2013-09-09Merge tag 'v3.11-rc7' into stable/for-linus-3.12Konrad Rzeszutek Wilk
Linux 3.11-rc7 As we need the git commit 28817e9de4f039a1a8c1fe1df2fa2df524626b9e Author: Chuck Anderson <chuck.anderson@oracle.com> Date: Tue Aug 6 15:12:19 2013 -0700 xen/smp: initialize IPI vectors before marking CPU online * tag 'v3.11-rc7': (443 commits) Linux 3.11-rc7 ARC: [lib] strchr breakage in Big-endian configuration VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c staging: comedi: bug-fix NULL pointer dereference on failed attach lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "ACPI / video: Always call acpi_video_init_brightness() on init" Revert "genetlink: fix family dump race" ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09ARM: 7835/2: fix modular build of xor_blocks() with NEON enabledArd Biesheuvel
Commit 0195659 introduced a NEON accelerated version of the xor_blocks() function, but it needs the changes in this patch to allow it to be built as a module rather than statically into the kernel. This patch creates a separate module xor-neon.ko which exports the NEON inner xor_blocks() functions depended upon by the regular xor.ko if it is built with CONFIG_KERNEL_MODE_NEON=y Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-09xen/arm: disable cpuidle and cpufreq when linux is running as dom0Julien Grall
When linux is running as dom0, Xen doesn't show the physical cpu but a virtual CPU. On some ARM SOC (for instance the exynos 5250), linux registers callbacks for cpuidle and cpufreq. When these callbacks are called, they will modify directly the physical cpu not the virtual one. It can impact the whole board instead of only dom0. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-09-09ARM: xen: only set pm function ptrs for Xen guestsRob Herring
xen_pm_init was unconditionally setting pm_power_off and arm_pm_restart function pointers. This breaks multi-platform kernels. Make this conditional on running as a Xen guest and make it a late_initcall to ensure it is setup after platform code for Dom0. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: stable@vger.kernel.org
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: "Here is the crypto update for 3.12: - Added MODULE_SOFTDEP to allow pre-loading of modules. - Reinstated crct10dif driver using the module softdep feature. - Allow via rng driver to be auto-loaded. - Split large input data when necessary in nx. - Handle zero length messages correctly for GCM/XCBC in nx. - Handle SHA-2 chunks bigger than block size properly in nx. - Handle unaligned lengths in omap-aes. - Added SHA384/SHA512 to omap-sham. - Added OMAP5/AM43XX SHAM support. - Added OMAP4 TRNG support. - Misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits) Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" hwrng: via - Add MODULE_DEVICE_TABLE crypto: fcrypt - Fix bitoperation for compilation with clang crypto: nx - fix SHA-2 for chunks bigger than block size crypto: nx - fix GCM for zero length messages crypto: nx - fix XCBC for zero length messages crypto: nx - fix limits to sg lists for AES-CCM crypto: nx - fix limits to sg lists for AES-XCBC crypto: nx - fix limits to sg lists for AES-GCM crypto: nx - fix limits to sg lists for AES-CTR crypto: nx - fix limits to sg lists for AES-CBC crypto: nx - fix limits to sg lists for AES-ECB crypto: nx - add offset to nx_build_sg_lists() padata - Register hotcpu notifier after initialization padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED hwrng: omap - reorder OMAP TRNG driver code crypto: omap-sham - correct dma burst size crypto: omap-sham - Enable Polling mode if DMA fails crypto: tegra-aes - bitwise vs logical and crypto: sahara - checking the wrong variable ...
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge upstream tree in order to reinstate crct10dif.
2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-09-06ARM: dts: exynos4: Specify PWM clocks in PWM nodeTomasz Figa
Since pwm-samsung bindings require at least one clock to be specified, this patch adds the missing clocks and clock-names properties to specify clocks used by PWM block on Exynos4 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-06Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-06Merge tag 'fixes-nc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC low-priority fixes from Olof Johansson: "This branch contains a handful of fixes for various platforms that weren't serious enough to be included in late 3.11-rc releases. Most of them are for minor cleanups and cosmetic fixes. There's also a bit of code removal here, one board file removal for clps711x, and removal of some legacy device creation on OMAP2+" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start' ARM: OMAP2: remove useless variable 'ret' ARM: OMAP: dma: fix error return code in omap_system_dma_probe() ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards ARM: OMAP2: Use a consistent AM33XX SoC option description ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC ARM: clps711x: edb7211: Remove extra iotable_init() call ARM: clps711x: autcpu12: Remove incorrect config checking ARM: clps711x: Drop fortunet board support ARM: clps711x: Remove the special name for the syscon driver ARM: dts: Fix memory node in skeleton64.dtsi ARM: Keystone: Convert device tree file to use IRQ defines ARM: keystone: use #include to include skeleton.dtsi ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc() ARM: Keystone: No need to preserve r12 across smc call ARM: keystone: remove redundant smp_init_cpus definition ARM: keystone: drop useless HAVE_SCHED_CLOCK ARM: dove: fix missing __init section of dove_mpp_gpio_mode ARM: shmobile: armadillo800eva-reference: fix compiler warning ...
2013-09-06Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 update from Catalin Marinas: - User tagged pointers support (top 8-bit of user pointers automatically ignored by the CPU). - Kernel mode NEON (no users for arm64 yet but work in progress). - arm64 kernel Image header extended to accommodate future EFI stub. - Remove BogoMIPS reporting (not relevant, it's just the timer frequency). - Clean-up (EM_AARCH64/EM_ARM to elf-em.h, ELF notes in read-only segment, unused variable). - Bug-fixes (RAM boundaries not 2MB aligned, perf, includes). * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: Documentation/arm64: clarify requirements for DTB placement arm64: mm: permit use of tagged pointers at EL0 Move the EM_ARM and EM_AARCH64 definitions to uapi/linux/elf-em.h arm64: Remove unused cpu_name ascii in arch/arm64/mm/proc.S arm64: delay: don't bother reporting bogomips in /proc/cpuinfo arm64: Fix mapping of memory banks not ending on a PMD_SIZE boundary arm64: move elf notes into readonly segment arm64: Enable interrupts in the EL0 undef handler arm64: Expand arm64 image header ARM64: include: asm: include "asm/types.h" in "pgtable-2level-types.h" and "pgtable-3level-types.h" arm64: add support for kernel mode NEON arm64: perf: fix ARMv8 EVTYPE_MASK to include NSH bit arm64: perf: fix group validation when using enable_on_exec
2013-09-05Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "This set includes adding support for Neon acceleration of RAID6 XOR code from Ard Biesheuvel, cache flushing and barrier updates from Will Deacon, and a cleanup to the ARM debug code which reduces the amount of code by about 500 lines. A few other cleanups, such as constifying the machine descriptors which already shouldn't be written to, cleaning up the printing of the L2 cache size" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits) ARM: 7826/1: debug: support debug ll on hisilicon soc ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines ARM: 7827/1: highbank: fix debug uart virtual address for LPAE ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022 ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port ARM: debug: move SPEAr debug to generic PL01x code ARM: debug: move davinci debug to generic 8250 code ARM: debug: move keystone debug to generic 8250 code ARM: debug: remove DEBUG_ROCKCHIP_UART ARM: debug: provide generic option choices for 8250 and PL01x ports ARM: debug: move PL01X debug include into arch/arm/include/debug/ ARM: debug: provide PL01x debug uart phys/virt address configuration options ARM: debug: add support for word accesses to debug/8250.S ARM: debug: move 8250 debug include into arch/arm/include/debug/ ARM: debug: provide 8250 debug uart phys/virt address configuration options ARM: debug: provide 8250 debug uart register shift configuration option ARM: debug: provide 8250 debug uart flow control configuration option ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05Merge tag 'fbdev-3.12-omap-legacy-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP specific fbdev changes from Tomi Valkeinen: "I've got this pull request separate from the main fbdev pull request, as this contains a bunch of OMAP board file changes and thus could possibly be rejected in case of bad conflicts. The removal of the old display drivers depend on the board file changes, so Tony Lindgren suggested taking them together via fbdev tree. These are in linux-next, and also Tony didn't see any conflicts with any of the branches he had, so they should go in clean. - Change the OMAP board files to use the new OMAP display drivers - Remove all the old drivers, and the related auxiliary code" * tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: rename omap_dss_device's 'device' field to 'dst' OMAPDSS: rename omap_dss_device's 'output' to 'src' OMAPDSS: DSS: remove legacy dss bus support OMAPDSS: RFBI: remove code related to old panel model OMAPDSS: VENC: remove code related to old panel model OMAPDSS: SDI: remove code related to old panel model OMAPDSS: DSI: remove code related to old panel model OMAPDSS: HDMI: remove code related to old panel model OMAPDSS: DPI: remove code related to old panel model OMAPDSS: remove all old panel drivers OMAPDSS: DPI: change regulator handling OMAPDSS: SDI: change regulator handling OMAPDSS: fix DPI and SDI device ids OMAPDSS: remove omap_dss_device->channel field OMAPDSS: RFBI: Mark RFBI as broken ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig ARM: OMAP: AM3517EVM: use new display drivers ARM: OMAP: Zoom: use new display drivers ARM: OMAP: Pandora: use new display drivers ARM: OMAP: OMAP3EVM: use new display drivers ...
2013-09-05Merge branches 'debug-choice', 'devel-stable' and 'misc' into for-linusRussell King
2013-09-04Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Gleb Natapov: "The highlights of the release are nested EPT and pv-ticketlocks support (hypervisor part, guest part, which is most of the code, goes through tip tree). Apart of that there are many fixes for all arches" Fix up semantic conflicts as discussed in the pull request thread.. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits) ARM: KVM: Add newlines to panic strings ARM: KVM: Work around older compiler bug ARM: KVM: Simplify tracepoint text ARM: KVM: Fix kvm_set_pte assignment ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256 ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs ARM: KVM: vgic: fix GICD_ICFGRn access ARM: KVM: vgic: simplify vgic_get_target_reg KVM: MMU: remove unused parameter KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate() KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX KVM: x86: update masterclock when kvmclock_offset is calculated (v2) KVM: PPC: Book3S: Fix compile error in XICS emulation KVM: PPC: Book3S PR: return appropriate error when allocation fails arch: powerpc: kvm: add signed type cast for comparation KVM: x86: add comments where MMIO does not return to the emulator KVM: vmx: count exits to userspace during invalid guest emulation KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp kvm: optimize away THP checks in kvm_is_mmio_pfn() ...
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Changes are seen in a wide range of codes, mainly due to ASoC DAPM requirements; HD-audio shows a high peak in diffstat, it's just a removal of bunch of old static quirks. Some highlights: - HDPM: Updates for AIO/RayDAT support, TCO/sync support - RME96: Add PCM sync support - HD-audio: * A few HDMI/DP audio updates (CA assignment fix, stream switching fix, Intel DP device list support) * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic improvements, Chromebook fixes, STAC9228 Dell fixes) * Replace the all static quirks for AD codecs with the generic parser * WAKEEN support for handling irqs in the power saving mode - USB-audio: Clean up implicit fb handling and related codes - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers have had some level of DAPM support added. In addition, a lot of cleanups and improvements in DAPM. - Support for ASoC cross-platform compile test - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997 - DT bindings for kirkwood and i.MX S/PDIF - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000. - Core helpers for bitbanged AC'97 reset" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits) ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional ASoC: soc-pcm: Allow to specify unidirectional dai_link ASoC: fsl_spdif: Staticse non-exported symbols ASoC: ssm2602: Fix cache sync ASoC: Remove unused sysfs_registered field from snd_soc_codec struct ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct ASoC: Remove unused control_type field from snd_soc_codec struct ASoC: fsl: Add one blank space after ':=' in Makefile ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c ASoC: rt5640: change widget sequence for depop ASoC: dapm: Fix auto-disable for inverted controls ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF ASoC: Samsung: Do not queue cyclic buffers multiple times ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata() ASoC: designware_i2s: Remove unnecessary dev_set_drvdata() ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe() ASoC: fsl: Add S/PDIF machine driver ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards ...
2013-09-04Merge tag 'pinctrl-v3.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "Here is the bulk of pin control changes for the v3.12 series. Most of the relevant information is in the tag. I merged in v3.11-rc7 last week to get rid of a largeish conflict within the sunxi (AllWinner) driver in linux-next and fix up the non-trivial merge the right way. That driver had a rather large fix adding locking late in the release cycle. Overall the bulk changes this time is cleanups and refactorings and not much new features, which is nice. - Refactorings for generic pin config handling in the core. - Factor out a set of device tree utilities for use in all drivers, to parse and allocate maps from the device tree. - Some fixes to the core such as more nitpicky locking. - Pushed down config array iteration into the drivers. This patch is necessary for drivers that want to iterate over configs and pile up a stack of alterations to the same register(s), or if the driver wants to take a local spinlock when committing the configuration. - A new driver for the Texas Instruments Palmas PMIC by Laxman Dewangan. This is used on the Tegra systems. - A major cleanup and modernization of the PFC (Super Hitachi and ARM SHmobile) pin controller and subdrivers. - Support for the A20 and A31 sunxi (AllWinner) SoCs. - A huge pile of fixes and cleanups: Axel Lin, Jingoo Han Dan Carpenter, Julia Lawall and Sachin Kamat did an excellent job here" * tag 'pinctrl-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (124 commits) pinctrl: sunxi: Fix off-by-one for valid offset range checking pinctrl: sunxi: drop lock on error path pinctrl: pinconf-generic: Remove ti prefix in dev_err messages pinctrl: rockchip: Implement .request() and .free() callbacks pinctrl: at91: fix get_pullup/down function return pinctrl: sh-pfc: remove unnecessary platform_set_drvdata() pinctrl: Add s5pv210 support to pinctrl-exynos pinctrl: utils: include export.h to avoid warnings pinctrl: s3c24xx: off by one in s3c24xx_eint_init() pinctrl: mvebu: testing the wrong variable pinctrl: abx500: fix bitwise AND test pinctrl: mvebu: Convert to use devm_ioremap_resource pinctrl: Pass all configs to driver on pin_config_set() pinctrl: tz1090-pdc: Convert to devm_ioremap_resource pinctrl: tz1090: Convert to devm_ioremap_resource pinctrl: tegra: Convert to devm_ioremap_resource pinctrl: rockchip: Simplify pin_to_bank equation pinctrl: spear: Convert to devm_ioremap_resource pinctrl: rockchip: Remove of_match_ptr macro for DT only driver pinctrl: palmas: PINCTRL_PALMAS needs to select PINMUX ...
2013-09-04ARM: PCI: versatile: Fix SMAP register offsetsPeter Maydell
The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04ARM: PCI: versatile: Fix PCI I/OPeter Maydell
The versatile PCI controller code was confused between the PCI I/O window (at 0x43000000) and the first PCI memory window (at 0x44000000). Pass the correct base address to pci_remap_io() so that PCI I/O accesses work. Since the first PCI memory window isn't used at all (it's an odd size), rename the associated variables and labels so that it's clear that it isn't related to the I/O window. This has been tested and confirmed to fix PCI I/O accesses both on physical PB926+PCI backplane hardware and on QEMU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04ARM: PCI: versatile: Fix map_irq function to match hardwarePeter Maydell
The PCI controller code for the Versatile board has never had the correct IRQ mapping for hardware. For many years it had an odd mapping ("all interrupts are int 27") which aligned with the equivalent bug in QEMU. However as of commit 1bc39ac5dab265 the mapping changed and no longer matched either hardware or QEMU, with the result that any PCI card beyond the first in QEMU would not have functioning interrupts; for example a boot with a SCSI controller would time out as follows: ------------ sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 92 sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 [...] scsi 0:0:0:0: ABORT operation started scsi 0:0:0:0: ABORT operation timed-out. scsi 0:0:0:0: DEVICE RESET operation started scsi 0:0:0:0: DEVICE RESET operation timed-out. scsi 0:0:0:0: BUS RESET operation started scsi 0:0:0:0: BUS RESET operation timed-out. scsi 0:0:0:0: HOST RESET operation started sym0: SCSI BUS has been reset ------------ Fix the mapping so that it matches real hardware (checked against the schematics for PB926 and backplane, and tested against the hardware). This allows PCI cards using interrupts to work on hardware for the first time; this change will also work with QEMU 1.5 or later, where the equivalent bugs in the modelling of the hardware have been fixed. Although QEMU will attempt to autodetect whether the kernel is expecting the long-standing "everything is int 27" mapping or the one hardware has, for certainty we force it into "definitely behave like hardware mode"; this will avoid unexpected surprises later if we implement sparse irqs. This is harmless on hardware. Thanks to Paul Gortmaker for bisecting the problem and finding an initial solution, to Russell King for providing the correct interrupt mapping, and to Guenter Roeck for providing an initial version of this patch and prodding me into relocating the hardware and retesting everything. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-09-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Various clocksource driver updates: extend the core with memory mapped hardware (mmio) support and add new (ARM) Moxart SoC and sun4i hardware support" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) clocksource: arch_timer: Add support for memory mapped timers clocksource: arch_timer: Push the read/write wrappers deeper Documentation: Add memory mapped ARM architected timer binding clocksource: arch_timer: Pass clock event to set_mode callback clocksource: arch_timer: Make register accessors less error-prone ARM: clocksource: moxart: documentation: Update device tree bindings document ARM: clocksource: moxart: Add bitops.h include ARM: clocksource: moxart: documentation: Fix device tree bindings document ARM: clocksource: Add support for MOXA ART SoCs clocksource: cadence_ttc: Reuse clocksource as sched_clock clocksource: cadence_ttc: Remove unused header clocksource: sun4i: Fix bug when switching from periodic to oneshot modes clocksource: sun4i: Cleanup parent clock setup clocksource: sun4i: Remove TIMER_SCAL variable clocksource: sun4i: Factor out some timer code clocksource: sun4i: Fix the next event code clocksource: sun4i: Don't forget to enable the clock we use clocksource: sun4i: Add clocksource and sched clock drivers clocksource: sun4i: rename AUTORELOAD define to RELOAD clocksource: sun4i: Wrap macros arguments in parenthesis ...
2013-09-04ARM: edma: Add function to manually trigger an EDMA channelJoel Fernandes
Manual trigger for events missed as a result of splitting a scatter gather list and DMA'ing it in batches. Add a helper function to trigger a channel incase any such events are missed. Signed-off-by: Joel Fernandes <joelf@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-03Merge tag 'for-3.12-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "A set of patches makes the device tree documentation for the various PWM drivers more consistent. Device tree support is added to the Renesas TPU driver. The sysfs interface now makes use of dev_groups. Other than that there is a healthy assortment of fixes and enhancements for minor issues that have shown up" * tag 'for-3.12-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: pxa: Use module_platform_driver pwm: tiehrpwm: add missing __iomem annotation pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context() pwm: simplify use of devm_ioremap_resource pwm: renesas-tpu: Add DT support ARM: dts: Use the PWM polarity flags pwm: Update DT bindings to reference pwm.txt for cells documentation pwm: Use the DT macro directly when parsing PWM DT flags pwm: Add PWM polarity flag macro for DT pwm: mxs: Check the return value from stmp_reset_block() pwm: convert class code to use dev_groups
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-09-03Merge tag 'tty-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver patches from Greg KH: "Here's the big tty/serial driver pull request for 3.12-rc1. Lots of n_tty reworks to resolve some very long-standing issues, removing the 3-4 different locks that were taken for every character. This code has been beaten on for a long time in linux-next with no reported regressions. Other than that, a range of serial and tty driver updates and revisions. Full details in the shortlog" * tag 'tty-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (226 commits) hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc serial: imx: initialize the local variable tty: ar933x_uart: add device tree support and binding documentation tty: ar933x_uart: allow to build the driver as a module ARM: dts: msm: Update uartdm compatible strings devicetree: serial: Document msm_serial bindings serial: unify serial bindings into a single dir serial: fsl-imx-uart: Cleanup duplicate device tree binding tty: ar933x_uart: use config_enabled() macro to clean up ifdefs tty: ar933x_uart: remove superfluous assignment of ar933x_uart_driver.nr tty: ar933x_uart: use the clk API to get the uart clock tty: serial: cpm_uart: Adding proper request of GPIO used by cpm_uart driver serial: sirf: fix the amount of serial ports serial: sirf: define macro for some magic numbers of USP serial: icom: move array overflow checks earlier TTY: amiserial, remove unnecessary platform_set_drvdata() serial: st-asc: remove unnecessary platform_set_drvdata() msm_serial: Send more than 1 character on the console w/ UARTDM msm_serial: Add support for non-GSBI UARTDM devices msm_serial: Switch clock consumer strings and simplify code ...
2013-09-03Merge tag 'staging-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree merge from Greg KH: "Here's the bit staging tree pull request for 3.12-rc1. Lots of staging driver updates, and fixes. Lustre is finally enabled in the build, and lots of cleanup started happening in it. There's a new wireless driver in here, and 2 new TTY drivers, which cause the overall lines added/removed to be quite large on the "added" side. The IIO driver updates are also coming through here, as they are tied to the staging iio drivers" * tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits) staging: dwc2: make dwc2_core_params documentation more complete staging: dwc2: validate the value for phy_utmi_width staging: dwc2: interpret all hwcfg and related register at init time staging: dwc2: properly mask the GRXFSIZ register staging: dwc2: remove redundant register reads staging: dwc2: re-use hptxfsiz variable staging: dwc2: simplify debug output in dwc_hc_init staging: dwc2: add missing shift staging: dwc2: simplify register shift expressions staging: dwc2: only read the snpsid register once staging: dwc2: unshift non-bool register value constants staging: dwc2: fix off-by-one in check for max_packet_count parameter staging: dwc2: remove specific fifo size constants Staging:BCM:DDRInit.c:Renaming __FUNCTION__ staging: bcm: remove Version.h file. staging: rtl8188eu: off by one in rtw_set_802_11_add_wep() staging: r8188eu: copying one byte too much staging: rtl8188eu: || vs && typo staging: r8188eu: off by one bugs staging: crystalhd: Resolve sparse 'different base types' warnings. ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-03Merge tag 'usb-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB driver pull request for 3.12-rc1 Lots of USB driver fixes and updates. Nothing major, just the normal xhci, gadget, and other driver changes. Full details in the shortlog" * tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits) usbcore: fix incorrect type in assignment in descriptors_changed() usbcore: compare and release one bos descriptor in usb_reset_and_verify_device() ehci: remove debugging statement with ehci statistics in ehci_stop() ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set ehci: remove ehci_vdbg() verbose debugging statements Documentation sysfs-bus-usb: Document which files are used by libusb Documentation sysfs-bus-usb: Document the speed file used by libusb Documentation sysfs-bus-usb: Move files with known users to stable USB: fix build error when CONFIG_PM_SLEEP isn't enabled usb: r8a66597-hcd: use platform_{get,set}_drvdata() usb: phy-tegra-usb: use platform_{get,set}_drvdata() usb: acm gadget: Null termintate strings table dma: cppi41: off by one in desc_to_chan() xhci: Fix warning introduced by disabling runtime PM. dev-core: fix build break when DEBUG is enabled USB: OHCI: Allow runtime PM without system sleep usb: ohci-at91: remove unnecessary dev_set_drvdata() usb: renesas_usbhs: use platform_{get,set}_drvdata() usb: fotg210-udc: use platform_{get,set}_drvdata() ...
2013-09-03Merge branch 'socfpga/dt' into next/dtOlof Johansson
SoCFPGA DT changes from Dinh Nguyen. * socfpga/dt: dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-03Merge branch 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351 into ↵Olof Johansson
next/dt From Christian Daudt, DT changes for Broadcom. * 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351: ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: bcm281xx: DT changes for reboot code ARM: bcm281xx: Adding bcm28155-ap.dts
2013-09-03Merge tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/dt From Shawn Guo: It contains mxs device tree changes for 3.12. - New board addition and hogpins cleanup for Crystalfontz - New pinctrl entry addition for lcd, ssp2 and saif0 - Add alias and labels for various nodes - Enable devices like LRADC and USB for a couple of imx23 boards, and backlight for M28EVK * tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: mxs: add pin config for LCD sync and clock pins ARM: dts: mxs: add pin config for SSP3 interface ARM: dts: mxs: add another set of saif0_pins (without MCLK) ARM: dts: mxs: add labels to most nodes for easier reference ARM: dts: mxs: whitespace cleanup ARM: dts: mxs: Add spi alias ARM: dts: imx23-olinuxino: enable Low Resolution ADC ARM: dts: imx23-evk: enable Low Resolution ADC ARM: dts: imx23-evk: enable USB PHY and controller ARM: dts: mxs: remove old DMA binding data from client nodes ARM: mxs: Add backlight support for M28EVK ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10057: remove hogpins ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree