aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-omap3beagle.c
AgeCommit message (Collapse)Author
2011-05-11OMAP: DSS2: Move panel-generic-dpi.h to include/video/Tomi Valkeinen
arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-22Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
Conflicts: arch/arm/mach-omap2/board-overo.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-11OMAP2, 3: DSS2: DSI: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for DSI is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, vdds_dsi regulator handling is copied to dsi.c, since vdds_dsi regulator is needed by dpi_init() too. Board files are updated accordingly to add 2 instances of vdds_dsi regulator. DSI platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy
Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for VENC is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, venc_vdda_dac reading is moved to venc.c. VENC platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-10Merge branch 'for_2.6.39/pm-misc' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-09OMAP3: beagle xm: enable up to 800MHz OPPNishanth Menon
OMP3630 silicon can enable higher frequencies only depending on the board characteristics meeting the recommended standards, and has to be selectively toggled. Beagle XM uses 3730 variant and the board design allows enabling 800MHz and 1GHz OPPs. However, We need Smart reflex class 1.5 and ABB to enable 1GHz safely. For the moment, we tweak the default table to allow for 800Mhz OPP usage. Reported-by: Koen Kooi <koen@beagleboard.org> Tested-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-02omap: Remove unnecessary twl4030_codec_audio settings from board filesIlkka Koskinen
twl4030_codec_audio and twl4030_codec_vibra_data has unused field. In order to remove it, corresponding settings needs to be removed from board files. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-01arm: omap: usb: Invoke usbhs core device initializationKeshava Munegowda
The usbhs intialization is invoked by all omap3 and omap4 variant board files. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-01arm: omap: usb: create common enums and structures for ehci and ohciKeshava Munegowda
Create the ehci and ohci specific platform data structures. The port enum values are made common for both ehci and ohci. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-23OMAP2, 3: DSS2: board files: replace platform_device_register with ↵Senthilvadivu Guruswamy
omap_display_init() This patch updated board files to replace platform_device_register or platform_add_devices of DSS with omap_display_init(). This moves away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-14ARM: OMAP2: use early init hookRussell King - ARM Linux
Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-14Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits) omap4: Fix ULPI PHY init for ES1.0 SDP omap3: beaglexm: fix power on of DVI omap3: igep3: Add omap_reserve functionality omap3: beaglexm: fix DVI reset GPIO omap3: beaglexm: fix EHCI power up GPIO dir omap3: igep2: Add keypad support omap3: igep3: Fix IGEP module second MMC channel power supply omap3: igep3: Add USB EHCI support for IGEP module omap3: clocks: Fix build error 'CK_3430ES2' undeclared here arm: omap4: pandaboard: turn on PHY reference clock at init omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared omap2plus: voltage: Trivial linking fix 'undefined reference' omap2plus: voltage: Trivial warning fix 'no return statement' omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask arm: omap: gpio: don't access irq_desc array directly omap2+: pm_bus: make functions used as pointers as static OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+ OMAP2+: TWL: include pm header for init protos OMAP2+: TWL: make conversion routines static ... Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset GPIO" vs "use generic DPI panel driver")
2011-01-11omap3: beaglexm: fix power on of DVIKoen Kooi
TFP410 DVI chip is used to provide display out. This chip is controlled by 2 lines: LDO which supplies the power is controlled over gpio + 2 and the enable of the chip itself is done over gpio + 1 NOTE: the LDO is necessary for LED, serial blocks as well. gpio + 1 was used to sense USB overcurrent in vanilla beagle. Without this fix, the display would not function as the LDO remains shut down. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11omap3: beaglexm: fix DVI reset GPIOKoen Kooi
GPIO reset line for Beagle XM is different from vanilla beagle so we populate it as part of gpio update routine. This in part fixes the issue of display not functioning on beagle XM platform. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-11omap3: beaglexm: fix EHCI power up GPIO dirKoen Kooi
EHCI enable power pin is inverted (active high) in comparison to vanilla beagle which is active low. Handle this case conditionally. Without this fix, Beagle XM 4 port EHCI will not function and no networking will be available [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-10OMAP: use generic DPI panel driver in board filesBryan Wu
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight control driver code which will be moved out later. Then we can use generic DPI driver for sharp_ls_panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-12-21OMAP2+: io: split omap2_init_common_hw()Paul Walmsley
Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2010-12-10Merge branch 'devel-gpio' into omap-for-linusTony Lindgren
2010-12-07OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha
Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-02arm: mach-omap2: remove NULL board_mux from board filesAaro Koskinen
If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header file instead of forcing every single board to define it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated for combined board-zoom files] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-08OMAP2plus: Fix static function warningsManjunath Kondaiah G
This patch fixes sparse warnings due non declarations of static functions. arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static? arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static? arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static? drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-27Merge branch 'devel-boards' into omap-for-linusTony Lindgren
2010-09-27omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai
wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23omap: Adding beagle i2c eeprom driver to read EDIDMathieu J. Poirier
Adding i2c eeprom driver to access monitor EDID binary information from user space, something that is required by 'decode-edid' and 'parse-edid'. BugLink: https://bugs.launchpad.net/bugs/608279 Signed-off-by: Mathieu Poirier <mathieu.poirier@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23omap: Beagle: no gpio_wp pin connection on xMRobert Nelson
The omap3630 based BeagleBoard xM uses a MicroSD card slot with no write protection. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23omap: Beagle: only Cx boards use pin 23 for write protectRobert Nelson
system_rev comes from u-boot and is a constant 0x20, so Bx boards also fall in this 'if' and will get setup with the wrong gpio_wp pin. Switch to using the Beagle revision routine to correcly set pin 23 only for C1/2/3 and C4 Boards. Bx boards will then use the correct default pin setting. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23omap: Beagle: revision detectionRobert Nelson
Due to the omap3530 ES3.0 Silicon being used on both the B5/B6 and C1/2/3 Beagle we can't use the cpu_is_omap34xx() routines to differentiate the Beagle Boards. However gpio pins 171,172,173 where setup for this prupose, so lets use them. Changes: for older U-Boot's, use omap_mux_init_gpio() keep Beagle Rev in board-omap3beagle.c gpio_free on gpio request failure Tested on Beagle Revisions: B5, C2, C4, and xMA Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04Merge branch 'devel-map-io' into omap-for-linusTony Lindgren
2010-08-04omap3: introduce omap3_map_ioMike Rapoport
Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04omap3: Unify omap2_set_globals_3[43,6x]x functionsSergio Aguirre
The only difference between them is the physical address of the uart4 port, which is only present in 36xx chips. We don't really need to care about keeping these 2 functions, since the decision to use uart4 is more cleanly done later when we do have access to omap_revision variable. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: added comment for the uart4_phys] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap3 nand: fix issue in board file to detect nandSukumar Ghorai
Board file modified for not to provide gpmc phys_base address to nand driver. The gpmc_nand_init funciton is now used to detect the nand and required to adopt _prob function as in nand/omap2.c Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-16ARM: OMAP: Convert to use ->reserve method to reserve boot time memoryRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-18board-omap3-beagle: add DSS2 supportKoen Kooi
This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-11omap2/3/4: ehci: avoid compiler error with touchbookFelipe Balbi
the early_param() call in board-omap3touchbook.c expands to: static const char __setup_str_early_touchbook_revision[] __section(.init.rodata) _aligned(1) = tbr; [...] and we have a non-const variable being added to the same section: static struct ehci_hcd_omap_platform_data ehci_pdata __section(.init.rodata); because of that, gcc generates a section type conflict which can (and actually should) be avoided by marking const every variable marked with __initconst. This patch fixes that for the ehci_hdc_omap_platform_data. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19omap: musb: Pass board specific data from board fileMaulik Mankad
Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename hsmmc symbols to reflect independence from twl4030Adrian Hunter
hsmmc.[ch] no longer has any dependency on twl4030 and variable names should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter
mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren
Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-13mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-11omap: mux: Remove old mux code for 34xxTony Lindgren
Remove old mux code for 34xx Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Replace omap_cfg_reg() with new style signal or gpio functionsTony Lindgren
Replace omap_cfg_reg() with new style signal or gpio functions Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style init functions to omap3 board-*.c filesTony Lindgren
Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22omap: Add platform init code for EHCI driverFelipe Balbi
Add platform init code for EHCI driver. Various fixes to the original patch by Ajay Kumar Gupta <ajay.gupta@ti.com> and Anand Gadiyar <gadiyar@ti.com>. Overo support added by Olof Johansson <olof@lixom.net> Beagle support added by Koen Kooi <koen@beagleboard.org> CM-T32 support added by Mike Rapoport <mike@compulab.co.il> Signed-off-by: Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22OMAP: Configure audio_mclk for twl4030-codec MFDPeter Ujfalusi
audio_mclk value is going to be handled by the twl4030-codec MFD driver, configure the correct value for boards, which is using the twl4030 audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22OMAP: Platform support for twl4030_codec MFDPeter Ujfalusi
Add needed platform data for the twl4030_codec MFD on boards, where the audio part of the twl4030 codec is used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-22Merge 7xx-iosplit-plat-merge with omap-fixesTony Lindgren
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-27 17:57:08 +0000