aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-mvebu
AgeCommit message (Collapse)Author
2014-10-03cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'Viresh Kumar
The naming convention of this driver was always under the scanner, people complained that it should have a more generic name than cpu0, as it manages all CPUs that are sharing clock lines. Also, in future it will be modified to support any number of clusters with separate clock/voltage lines. Lets rename it to 'cpufreq_dt' from 'cpufreq_cpu0'. Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Included in this update: - perf updates from Will Deacon: The main changes are callchain stability fixes from Jean Pihet and event mapping and PMU name rework from Mark Rutland The latter is preparatory work for enabling some code re-use with arm64 in the future. - updates for nommu from Uwe Kleine-König: Two different fixes for the same problem making some ARM nommu configurations not boot since 3.6-rc1. The problem is that user_addr_max returned the biggest available RAM address which makes some copy_from_user variants fail to read from XIP memory. - deprecate legacy OMAP DMA API, in preparation for it's removal. The popular drivers have been converted over, leaving a very small number of rarely used drivers, which hopefully can be converted during the next cycle with a bit more visibility (and hopefully people popping out of the woodwork to help test) - more tweaks for BE systems, particularly with the kernel image format. In connection with this, I've cleaned up the way we generate the linker script for the decompressor. - removal of hard-coded assumptions of the kernel stack size, making everywhere depend on the value of THREAD_SIZE_ORDER. - MCPM updates from Nicolas Pitre. - Make it easier for proper CPU part number checks (which should always include the vendor field). - Assembly code optimisation - use the "bx" instruction when returning from a function on ARMv6+ rather than "mov pc, reg". - Save the last kernel misaligned fault location and report it via the procfs alignment file. - Clean up the way we create the initial stack frame, which is a repeated pattern in several different locations. - Support for 8-byte get_user(), needed for some DRM implementations. - mcs locking from Will Deacon. - Save and restore a few more Cortex-A9 registers (for errata workarounds) - Fix various aspects of the SWP emulation, and the ELF hwcap for the SWP instruction. - Update LPAE logic for pte_write and pmd_write to make it more correct. - Support for Broadcom Brahma15 CPU cores. - ARM assembly crypto updates from Ard Biesheuvel" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits) ARM: add comments to the early page table remap code ARM: 8122/1: smp_scu: enable SCU standby support ARM: 8121/1: smp_scu: use macro for SCU enable bit ARM: 8120/1: crypto: sha512: add ARM NEON implementation ARM: 8119/1: crypto: sha1: add ARM NEON implementation ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h> ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15 ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives ARM: SWP emulation: only initialise on ARMv7 CPUs ARM: SWP emulation: always enable when SMP is enabled ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking ARM: 8091/2: add get_user() support for 8 byte types ARM: 8097/1: unistd.h: relocate comments back to place ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET) ARM: 8090/1: add revision info for PL310 errata 588369 and 727915 ...
2014-07-26Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper: - Armada XP - Fix return value check in pmsu code - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!) - Armada 370/38x - Add cpuidle support - mvebu - Fix build when no platforms are selected - Update EBU SoC status in docs * tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits) Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare() ARM: mvebu: use a local variable to store the resume address ARM: mvebu: make the cpuidle initialization more generic ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c ARM: mvebu: use the common function for Armada 375 SMP workaround ARM: mvebu: add a common function for the boot address work around ARM: mvebu: sort the #include of pmsu.c in alphabetic order ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init() clk: mvebu: extend clk-cpu for dynamic frequency scaling ARM: mvebu: extend PMSU code to support dynamic frequency scaling ... Conflicts: arch/arm/mach-mvebu/Kconfig drivers/cpuidle/cpuidle-armada-370-xp.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge branches 'samsung/cleanup' and 'samsung/s5p-cleanup-v2', tag ↵Arnd Bergmann
'v3.16-rc6' into next/soc The following samsung branches are based on these cleanups, which are already in mainline before this branch gets pulled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24ARM: mvebu: fix build without platforms selectedArnd Bergmann
When building a multiplatform kernel that enables 'ARCH_MVEBU' but none of the individual options under it, we get this link error: arch/arm/mach-mvebu/built-in.o: In function `mvebu_armada375_smp_wa_init': :(.text+0x190): undefined reference to `mvebu_setup_boot_addr_wa' The best solution seems to be to ensure that in this configuration, we don't actually build any of the mvebu code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/7339332.ZE2mWIdyDh@wuerfel Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24Merge branch 'mvebu/soc-cpuidle' into mvebu/socJason Cooper
Conflicts: arch/arm/mach-mvebu/pmsu.c
2014-07-24ARM: mvebu: add cpuidle support for Armada 38xGregory CLEMENT
Unlike the Armada XP and the Armada 370, this SoC uses a Cortex A9 core. Consequently, the procedure to enter the idle state is different: interaction with the SCU, not disabling snooping, etc. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-16-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: add cpuidle support for Armada 370Gregory CLEMENT
This commit introduces the cpuidle support for Armada 370. The main difference compared to the already supported Armada XP is that the Armada 370 has an issue caused by "a slow exit process from the deep idle state due to heavy L1/L2 cache cleanup operations performed by the BootROM software" (cf errata GL-BootROM-10). To work around this issue, we replace the restart code of the BootROM by some custom code located in an internal SRAM. For this purpose, we use the common function mvebu_boot_addr_wa() introduced in the commit "ARM: mvebu: Add a common function for the boot address work around". The message in case of failure to suspend the system was switched from the warn level to the debug level. Indeed due to the "slow exit process from the deep idle state" in Armada 370, this situation happens quite often. Using the debug level avoids spamming the kernel logs, but still allows to enable it if needed. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-15-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7Gregory CLEMENT
This driver will be able to manage the cpuidle for more SoCs than just Armada 370 and XP. It will also support Armada 38x and potentially other SoC of the Marvell Armada EBU family. To take this into account, this patch renames the driver and its symbols. It also changes the driver name from cpuidle-armada-370-xp to cpuidle-armada-xp, because separate platform drivers will be registered for the other SoC types. This change must be done simultaneously in the cpuidle driver and in the PMSU code in order to remain bisectable. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-12-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: export the SCU addressGregory CLEMENT
The SCU address will be needed in other files than board-v7.c, especially in pmsu.c for cpuidle related activities. So this patch adds a function that allows to retrieve the virtual address at which the SCU has been mapped. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-10-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare()Gregory CLEMENT
On some mvebu v7 SoCs (the ones using a Cortex-A9 core and not a PJ4B core), the snoop disabling feature does not exist as the hardware coherency is handled in a different way. Therefore, in preparation to the introduction of the cpuidle support for those SoCs, this commit modifies the mvebu_v7_psmu_idle_prepare() function to take several flags, which allow to decide whether snooping should be disabled, and whether we should use the deep idle mode or not. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-9-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: use a local variable to store the resume addressGregory CLEMENT
The resume address used by the cpuidle code will not always be the same depending on the SoC. Using a local variable to store the resume address allows to keep the same function for the PM notifier but with a different address. This address will be set during the initialization of the cpuidle logic in pmsu.c. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-8-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: make the cpuidle initialization more genericGregory CLEMENT
In preparation to the addition of the cpuidle support for more SoCs, this patch moves the Armada XP specific initialization to a separate function. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-7-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.cGregory CLEMENT
Most of the function related to the PMSU are not specific to the Armada 370 or Armada XP SoCs. They can also be used for most of the other mvebu ARMv7 SoCs, and will actually be used to support cpuidle on Armada 38x. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: use the common function for Armada 375 SMP workaroundGregory CLEMENT
Use the common function mvebu_setup_boot_addr_wa() introduced in the commit "ARM: mvebu: Add a common function for the boot address work around" instead of the dedicated version for Armada 375. This commit also moves the workaround in the system-controller module. Indeed the workaround on 375 is really related to setting the boot address which is done by the system controller. As a bonus we no longer use an harcoded value to access the register storing the boot address. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: add a common function for the boot address work aroundGregory CLEMENT
On some of the mvebu SoCs and due to internal BootROM issue, the CPU initial jump code must be placed in the SRAM memory of the SoC. In order to achieve this, we have to unmap the BootROM and at some specific location where the BootROM was placed, create a dedicated MBus window for the SRAM. This SRAM is initialized with a few instructions of code that allows to jump to the real secondary CPU boot address. The SRAM used is the Crypto engine one. This work around is currently needed for booting SMP on Armada 375 Z1 and will be needed for cpuidle support on Armada 370. Instead of duplicating the same code, this commit introduces a common function to handle it: mvebu_setup_boot_addr_wa(). Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: sort the #include of pmsu.c in alphabetic orderGregory CLEMENT
Sorting the headers in alphabetic order will help to reduce conflicts when adding new headers later. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU codeGregory CLEMENT
do_armada_370_xp_cpu_suspend() and armada_370_xp_pmsu_idle_prepare(), have been merged into a single function called armada_370_xp_pmsu_idle_enter() by the commit "bbb92284b6c8 ARM: mvebu: slightly refactor/rename PMSU idle related functions", in prepare for the introduction of the CPU hotplug support for Armada XP. But for cpuidle the prepare function will be common to all the mvebu SoCs that use the PMSU, while the suspend function will be specific to each SoC. Keeping the prepare function separate will help reducing code duplication while new SoC support is added. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1406120453-29291-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24Merge branch 'mvebu/fixes' into mvebu/soc-cpuidleJason Cooper
2014-07-23ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Link: https://lkml.kernel.org/r/1406038688-26417-1-git-send-email-weiyj_lk@163.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-22Merge branch 'mvebu/soc-cpufreq' into mvebu/socJason Cooper
2014-07-19Merge tag 'exynos-cpuidle' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim: - add callbacks exynos_suspend() and exynos_powered_up() for support cpuidle through mcpm - skip exynos_cpuidle for exynos5420 because is uses cpuidle-big-liggle generic cpuidle driver - add generic functions to calculate cpu number is used for pmu and this is required for exynos5420 multi-cluster - add of_device_id structure for big.LITTLE cpuidle and add "samsung,exynos5420" compatible string for exynos5420 * tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18Merge tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
Merge "mvebu fixes for v3.16 (round 3)" from Jason Cooper: - Fix SMP boot on 38x/375 in big endian - Fix operand list for pmsu on 370/XP - Fix coherency bus notifiers * tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-18ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+Russell King
ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-16ARM: mvebu: extend PMSU code to support dynamic frequency scalingThomas Petazzoni
This commit adds the necessary code in the Marvell EBU PMSU driver to support dynamic frequency scaling. In essence, what this new code does is that it: * registers the frequency operating points supported by the CPU; * registers a clock notifier of the CPU clocks. The notifier function listens to the newly introduced APPLY_RATE_CHANGE event, and uses that to finalize the frequency transition by doing the part of the procedure that involves the PMSU; * registers a platform device for the cpufreq-generic driver, which will take care of the CPU frequency transitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404920715-19834-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-16ARM: mvebu: ensure CPU clocks are enabledThomas Petazzoni
In the Armada XP SMP support code, we are reading the clock frequency of the booting CPU, and use that to assign the same frequency to the other CPUs, and we do this while the clocks are disabled. However, the CPU clocks are in fact never prepared/enabled, and to support cpufreq, we now have two code paths to change the frequency of the CPU clocks in the CPU clock driver: one when the clock is enabled (dynamic frequency scaling), one when the clock is disabled (adjusting the CPU frequency before starting the CPU). In order for this to work, the CPU clocks now have to be prepared and enabled after the initial synchronization of the clock frequencies is done, so that all future rate changes of the CPU clocks will trigger a dynamic frequency scaling transition. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404920715-19834-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08ARM: mvebu: Fix coherency bus notifiers by using separate notifiersEzequiel Garcia
Currently, the coherency fabric support registers two bus notifiers; one for platform, one for pci bus types, with the same notifier block. However, this is illegal and can cause serious issues: the notifier block is also a link in the notifier list and cannot be inserted twice. This commit fixes this by using different notifier blocks (with the same notifier callback) to set the platform and pci bus types notifiers. Fixes: b0063aad5dd8 ("ARM: mvebu: use hardware I/O coherency also for PCI devices") Reported-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1404826657-6977-1-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08ARM: mvebu: Fix the operand list in the inline asm of ↵Gregory CLEMENT
armada_370_xp_pmsu_idle_enter In the inline asm part of the function armada_370_xp_pmsu_idle_enter() the input operand was used. The intent here was to let the compiler choose this register so it could do the optimization it needed. However an input operand is not supposed to be modified by the inline asm code. This can lead to improper generated instructions. In some case generated instruction the compiler made the choice to reuse the same register to store the return value. But in the assembly part this register was modified, so it can lead to return an wrong value. The fix is to use a clobber. Thanks to this the compiler will know that the value of this register will be modified. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404483736-16938-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-07Merge tag 'mvebu-soc-3.17' of git://git.infradead.org/linux-mvebu into next/socOlof Johansson
Merge "mvebu SoC changes for v3.17" from Jason Cooper: - kirkwood * add setup file for netxbig LEDs (non-trivial DT binding doesn't exist yet) - mvebu * staticize where needed * add CPU hotplug for Armada XP * add public datasheet for Armada 370 * don't apply thermal quirk by default * get SoC ID from the system controller when possible * tag 'mvebu-soc-3.17' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Staticize mvebu_cpu_reset_init ARM: mvebu: Staticize armada_370_xp_cpu_pm_init ARM: mvebu: Staticize armada_375_smp_cpu1_enable_wa ARM: mvebu: Use system controller to get the soc id when possible ARM: mvebu: Use the a standard errno in mvebu_get_soc_id ARM: mvebu: Don't apply the thermal quirk if the SoC revision is unknown Documentation: arm: add URLs to public datasheets for the Marvell Armada 370 SoC ARM: mvebu: implement CPU hotplug support for Armada XP ARM: mvebu: export PMSU idle enter/exit functions ARM: mvebu: slightly refactor/rename PMSU idle related functions ARM: mvebu: remove stub implementation of CPU hotplug on Armada 375/38x ARM: Kirkwood: Add setup file for netxbig LEDs ARM: mvebu: mark armada_370_xp_pmsu_idle_prepare() as static Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-04Merge tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-01ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endianThomas Petazzoni
The SMP boot on Armada 38x and Armada 375 Z1 is currently broken in big-endian configurations, and this commit fixes it for both platforms. For Armada 375 Z1, the problem was in the armada_375_smp_cpu1_enable_code part of the code that gets copied to the Crypto SRAM as a work-around for an issue of the Z1 stepping. This piece of code was not switching the CPU core to big-endian, and not endian-swapping the value read from the Resume Address register (the value is stored little-endian). Due to the introduction of the conditional 'rev r1, r1' instruction, the offset between the 'ldr r0, [pc, #4]' instruction and the value it was looking is different between LE and BE configurations. To solve this, we instead use one 'adr' instruction followed by one 'ldr'. For Armada 38x, the problem was simply that the CPU core was not switched to big endian in the secondary CPU startup function. This change was tested in LE and BE configurations on Armada 385, Armada 375 Z1 and Armada 375 A0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404228186-21203-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: fix cpuidle implementation to work on big-endian systemsThomas Petazzoni
On Marvell Armada XP, when a CPU comes back from deep idle state of cpuidle, it restarts its execution at armada_370_xp_cpu_resume(), which puts back the CPU into the coherency, and then calls the generic cpu_resume() function. While this works on little-endian configurations, it doesn't work on big-endian configurations because the CPU restarts in little-endian, and therefore must be switched back to big-endian to operate properly. To achieve this, a 'setend be' instruction must be executed in big-endian configurations. However, the ARM_BE8() macro that is used to implement nice compile-time conditional for ARM LE vs. ARM BE8 is not easily usable in inline assembly. Therefore, this patch moves the armada_370_xp_cpu_resume() C function, which was anyway just a block of inline assembly, into a proper pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be) instruction. Without this patch, an Armada XP big endian configuration with cpuidle enabled fails to boot, as it hangs as soon as one of the CPU hits the deep idle state. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: Staticize mvebu_cpu_reset_initSachin Kamat
'mvebu_cpu_reset_init' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Link: https://lkml.kernel.org/r/1403610235-22654-4-git-send-email-sachin.kamat@samsung.com Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: Staticize armada_370_xp_cpu_pm_initSachin Kamat
'armada_370_xp_cpu_pm_init' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Link: https://lkml.kernel.org/r/1403610235-22654-3-git-send-email-sachin.kamat@samsung.com Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: Staticize armada_375_smp_cpu1_enable_waSachin Kamat
'armada_375_smp_cpu1_enable_wa' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Link: https://lkml.kernel.org/r/1403610235-22654-2-git-send-email-sachin.kamat@samsung.com Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: Use system controller to get the soc id when possibleGregory CLEMENT
On Armada 38x it is possible to get the SoC Id and the revision without using the PCI register. Accessing the PCI registers implies enabling its clock and, because of the initialization issue, not keeping them enable. So if possible it is better to avoid it. Armada 370 and Armada XP provides the SoC ID values from the system controller but not the revision. Armada 375 provides both but the SoC ID value looks buggy (0x6660 instead of 0x6720). Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403538128-27859-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: Use the a standard errno in mvebu_get_soc_idGregory CLEMENT
Instead of using -1 as error value, use a standard errno. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403274953-21790-2-git-send-email-gregory.clement@free-electrons.com Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanupThomas Petazzoni
Commit 497a92308af8e9385fa3d135f7f416a997e4b93b ("ARM: mvebu: implement L2/PCIe deadlock workaround") introduced some logic in coherency.c to adjust the PL310 cache controller Device Tree node of Armada 375 and Armada 38x platform to include the 'arm,io-coherent' property if the system is running with hardware I/O coherency enabled. However, with the L2CC driver cleanup done by Russell King, the initialization of the L2CC driver has been moved earlier, and is now part of the init_IRQ() ARM function in arch/arm/kernel/irq.c. Therefore, calling coherency_init() in ->init_time() is now too late, as the Device Tree property gets added too late (after the L2CC driver has been initialized). In order to fix this, this commit removes the ->init_time() callback use in board-v7.c and replaces it with an ->init_irq() callback. We therefore no longer use the default ->init_irq() callback, but we now use the default ->init_time() callback. In this newly introduced ->init_irq() callback, we call irqchip_init() which is the default behavior when ->init_irq() isn't defined, and then do the initialization related to the coherency: SCU, coherency fabric, and mvebu-mbus (which is needed to start secondary CPUs). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30ARM: mvebu: move Armada 375 external abort logic as a quirkThomas Petazzoni
In preparation to a small re-organization of the initialization sequence in board-v7.c, this commit moves the registration of the custom external abort handler on Armada 375 later in the boot sequence, and makes it more similar to the other quirks that we already have. There is indeed no need to register this abort handler particularly early, it simply needs to be registered before switching to userspace. In addition to this, this commit makes the registration of the custom abort handler conditional on Armada 375 Z1, because Armada 375 A0 and later iterations are not affected by the issue. This commit was tested on both Armada 375 Z1 and Armada 375 A0 platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-25Merge tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for v3.16" from Jason Cooper: - mvebu - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - kirkwood - Fix phy-connection-type on GuruPlug board * tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection
2014-06-21ARM: mvebu: Don't apply the thermal quirk if the SoC revision is unknownEzequiel Garcia
Currently, the thermal quirk is skipped only if the SoC revision is known to be one that does not need them, but if the SoC revision cannot be obtained, the quirk is applied assuming it's needed. However, this quirk must be applied only we are sure the SoC needs it, for it breaks the thermal support if applied on a SoC that doesn't need it. The reason for this is that the quirk consists in changing the thermal devicetree compatible string and register offsets, to workaround a hardware bug in the early SoC revision. Such changes are wrong if the SoC is a new revision and doesn't need the workaround. Therefore, this commit changes the behavior, by requiring the SoC revision to be known in order to peform a quirk. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1402425283-24989-1-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-21ARM: mvebu: implement CPU hotplug support for Armada XPThomas Petazzoni
This commit implements CPU hotplug support for the Marvell Armada XP platform. The CPU hotplug stub functions from hotplug.c are moved into platsmp.c, as it doesn't make much sense to have a separate file just for these two functions. In addition, this commit: * Implements the ->cpu_die() function of SMP operations by calling armada_370_xp_pmsu_idle_enter() to enter the deep idle state for CPUs going offline. * Implements a dummy ->cpu_kill() function, simply needed for the kernel to know we have CPU hotplug support. * The armada_xp_boot_secondary() function makes sure to wake up the CPU if waiting in deep idle state by sending an IPI. This is because armada_xp_boot_secondary() is now used in two different situations: for the initial boot of secondary CPUs (where CPU reset deassert is used to wake up CPUs) and for CPU hotplug (where an IPI is used to take CPU out of deep idle). * At boot time, we exit from the idle state in the ->smp_secondary_init() hook. This commit has been tested using CPU hotplug through sysfs (/sys/devices/system/cpu/cpuX/online) and using kexec. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1401481098-23326-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-21ARM: mvebu: export PMSU idle enter/exit functionsThomas Petazzoni
The PMSU idle enter/exit functions will be needed for the CPU hotplug implementation on Armada XP, so this commit removes their static qualifier, and adds the appropriate prototypes in armada-370-xp.h. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1401481098-23326-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-21ARM: mvebu: slightly refactor/rename PMSU idle related functionsThomas Petazzoni
The CPU hotplug code will need to call into PMSU functions to enter and exit from deep idle states. However, the deep idle state is currently entered by a function called do_armada_370_xp_cpu_suspend() whose name really suggests it's an internal function, but we need to export it to other files in mach-mvebu. Therefore, this commit: * Merges the code of do_armada_370_xp_cpu_suspend() into armada_370_xp_pmsu_idle_prepare(), into a single function called armada_370_xp_pmsu_idle_enter(), which prepares the PMSU for deep idle, and then enters the deep idle state. This code will be common to both cpuidle and CPU hotplug. * For symetry, it renames the armada_370_xp_pmsu_idle_restore() function to armada_370_xp_pmsu_idle_exit(). We also remove the 'noinline' qualifier for these functions, which apparently had no reason to be here. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1401481098-23326-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-21ARM: mvebu: remove stub implementation of CPU hotplug on Armada 375/38xThomas Petazzoni
In preparation to the addition of CPU hotplug support for Armada XP, and therefore moving the existing stub functions for hotplug support, this commit removes the reference from the SMP implementation of Armada 375/38x to the armada_xp_cpu_die() function. Proper CPU hotplug support for Armada 375 and 38x will be implemented at a later point. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1401481098-23326-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: Kirkwood: Add setup file for netxbig LEDsAndrew Lunn
There is currently no DT binding for the CPLD which controls the LEDs on the Net 2Big and Net 5Big. So use a platform device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1401132591-26305-2-git-send-email-andrew@lunn.ch Tested-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: mark armada_370_xp_pmsu_idle_prepare() as staticThomas Petazzoni
The armada_370_xp_pmsu_idle_prepare() function is only used internally to pmsu.c, so there's no reason to not use the static qualifier. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1401116474-31221-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platformsThomas Petazzoni
On Marvell Armada platforms, the PMSU (Power Management Service Unit) controls a number of power management related activities, needed for things like suspend/resume, CPU hotplug, cpuidle or even simply SMP. Since cpuidle support was added for Armada XP, the pmsu.c file in arch/arm/mach-mvebu/ calls the cpu_suspend() and cpu_resume() ARM functions, which are only available when CONFIG_ARM_CPU_SUSPEND=y. Therefore, configurations that have CONFIG_ARM_CPU_SUSPEND disabled due to PM_SLEEP being disabled no longer build properly, due to undefined references to cpu_suspend() and cpu_resume(). To fix this, this patch simply ensures CONFIG_ARM_CPU_SUSPEND is always enabled for Marvell EBU v7 platforms. Doing things in a more fine-grained way would require a lot of #ifdef-ery in pmsu.c to isolate the parts that use cpu_suspend()/cpu_resume(), and those parts would anyway have been needed as soon as either one of suspend/resume, CPU hotplug or cpuidle was enabled. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402488397-31381-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: Fix broken SoC ID detectionEzequiel Garcia
Currently the mvebu boards need to detect the SoC revision in order to apply some quirks needed to workaround issues found on I2C and thermal controllers present only in very early SoC. This detection requires PCI address translation to work, so we need to explicitly select OF_ADDRESS_PCI. This can be considered a partial revert of the following commit, that wrongly removed the option selection: commit 55400f3a1f89e39761f45c19f6e4235a329c400b Author: Rob Herring <robh@kernel.org> Date: Tue Apr 22 14:15:52 2014 -0500 ARM: mvebu: clean-up unneeded kconfig selects Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1402347165-19988-1-git-send-email-ezequiel.garcia@free-electrons.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 04:28:40 +0000