aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2015-11-03ARM: Kirkwood: add LED DT entries for netxbig boardsSimon Guinot
This patch adds DT entries for the LEDs found on the Kirkwood-based LaCie boards 2Big and 5Big Network v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-02Merge tag 'pinctrl-v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.4 kernel development cycle. Development pace is high in pin control again this merge window. 28 contributors, 83 patches. It hits a few sites outside the pin control subsystem: - Device tree bindings in Documentation (as usual) - MAINTAINERS - drivers/base/* for the "init" state handling by Doug Anderson. This has been ACKed by Greg. - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change in the USB subsystem. This has been ACKed by both Greg and Felipe. - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone through the ARM SoC tree but ended up here. This time I am using Geert Uytterhoeven as submaintainer for SH PFC since the are three-four people working in parallel with new Renesas ASICs. Summary of changes: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes" * tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits) pinctrl: pinconf: remove needless loop pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER pinctrl: zynq: fix UTF-8 errors pinctrl: zynq: Initialize early pinctrl: at91: add missing of_node_put pinctrl: tegra-xusb: Correct lane mux options pinctrl: intel: Add Intel Broxton pin controller support pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt drivers/pinctrl: Add the concept of an "init" state pinctrl: uniphier: set input-enable before pin-muxing pinctrl: cygnus: Add new compatible string for gpio controller driver pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver pinctrl: cygnus: Optional DT property to support pin mappings pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h> usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h> ...
2015-11-02Merge tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc() - Add new ioctl to allow userspace to send multi commands - Wait for card busy signalling before starting SDIO requests - Remove MMC_CLKGATE - Enable tuning for DDR50 mode - Some code clean-up/improvements to mmc pwrseq - Use highest priority for eMMC restart handler - Add DT bindings for eMMC hardware reset support - Extend the mmc_send_tuning() API - Improve ios show for debugfs - A couple of code optimizations MMC host: - Some generic OF improvements - Various code clean-ups - sirf: Add support for DDR50 - sunxi: Add support for card busy detection - mediatek: Use MMC_CAP_RUNTIME_RESUME - mediatek: Add support for eMMC HW-reset - mediatek: Add support for HS400 - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API - dw_mmc: Add external DMA interface support - dw_mmc: Some various improvements - dw_mmc-rockchip: MMC tuning with the clock phase framework - sdhci: Properly clear IRQs during resume - sdhci: Enable tuning for DDR50 mode - sdhci-of-esdhc: Use IRQ mode for card detection - sdhci-of-esdhc: Support both BE and LE host controller - sdhci-pci: Build o2micro support in the same module - sdhci-pci: Support for new Intel host controllers - sdhci-acpi: Support for new Intel host controllers" * tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits) mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register mmc: dw_mmc: NULL dereference in error message mmc: pwrseq: Use highest priority for eMMC restart handler mmc: mediatek: add HS400 support mmc: mmc: extend the mmc_send_tuning() mmc: mediatek: add implement of ops->hw_reset() mmc: mediatek: fix got GPD checksum error interrupt when data transfer mmc: mediatek: change the argument "ddr" to "timing" mmc: mediatek: make cmd_ints_mask to const mmc: dt-bindings: update Mediatek MMC bindings mmc: core: Add DT bindings for eMMC hardware reset support mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2 mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers mmc: sdhci-pci: Add more PCI IDs for Intel controllers arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC ...
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-10-31ARM: dts: uniphier: add system-bus-controller nodesMasahiro Yamada
The System Bus Controller block has two register regions, but having only the second one in a separate node was not nice. Replace it with a new node with two register regions in it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-27arm: enable building of all dtbsRob Herring
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. This is simpler for arm64 which has a bunch of sub-dirs. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk>
2015-10-27ARM: dts: uniphier: add outer cache controller nodesMasahiro Yamada
Add L2 cache controller nodes for all the UniPhier SoC DTSI. Also, add an L3 cache controller node for PH1-Pro5 DTSI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26ARM: dts: rockchip: add tuning related settings to veyron devicesHeiko Stuebner
This allows the tuning code to run and use higher speeds on capable cards. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-26ARM: dts: rockchip: Add drive/sample clocks for rk3288 dw_mmc devicesAlexandru M Stan
The drive/sample clocks can be phase shifted. The drive clock could be used in a future patch to adjust hold times. The sample clock is used for tuning. Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-26Merge tag 'sunxi-dt-for-4.4-3' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.4, round 3 A bunch of new boards, but mostly enable the support for the Audio Codec on the older SoCs (A10, A10s, A13, A20, R8) and enable it on various boards. * tag 'sunxi-dt-for-4.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun6i: Add dts file for MSI Primo81 tablet ARM: dts: sun6i: Add simplefb node labels to reference at board level ARM: dts: sun4i: Enable audio codec on Marsboard A10. ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet ARM: sun4i: Enable cubieboard audio codec ARM: sun5i: chip: Enable the audio codec ARM: sun4i: Enable audio-codec on Mele A1000 ARM: sun7i: Enable cubieboard2 audio codec ARM: sun7i: dt: enable audio codec on Cubietruck ARM: sun7i: Add sunxi codec device node ARM: sun5i: Add the Audio codec DT node ARM: sun4i: Add sunxi codec device node ARM: sun7i: Add audio codec clock ARM: sun5i: Add audio codec clock ARM: sun4i: Add audio codec clock ARM: sun7i: Add audio PLL ARM: sun5i: Add audio PLL ARM: sun4i: Add audio PLL ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano ARM: dts: sun6i: Add support for Sinlinx A31s SDK board Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'arm/soc/for-4.4/rpi-dt-v2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into next/dt This pull request contains the DT changes for BCM2835 in 4.4. It pulls in clk/clk-bcm2835 (which Stephen Boyd has said would be stable) because the DT changes to enable the clock driver need the driver itself to be present. These changes include the following: - Eric Anholt, moves the bcm2835 clock driver under bcm/ where it belongs with other Broadcom clock providers drivers, defines the binding for new clock driver, adds support for programming the BCM2835 audio domain, adds the DDC I2C controller to Device Tree, and finally migrates the Device Tree to use the new clock driver binding - Lubomir Rintel adds support for the Raspberry Pi Model A+ and B revision 2, and remove the I2S controller which is non-existent on Raspberry Pi Model B - Stefan Wahren adds an uart0 label for referencing the UART adapter * tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Add the DDC I2C controller to the device tree. ARM: bcm2835: Switch to using the new clock driver support. ARM: bcm2835: dt: Add Raspberry Pi Model A+ ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 ARM: bcm2835: dt: Raspberry Pi Model B had no I2S ARM: bcm2835: add label for uart0 clk: bcm2835: Add support for programming the audio domain clocks clk: bcm2835: Add binding docs for the new platform clock driver. clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26ARM: dts: uniphier: add I2C aliases for ProXstream2 boardsMasahiro Yamada
Add aliases to fix the I2C indexes like the other UniPhier boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'samsung-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung 2nd DT updates for v4.4 - use exynos5420-dw-mshc instead of exynos5250 for exynos3250 - add DISP1 clocks and the DISP1 power domain of two closk on exynos5250 (clock commit got Stephen's ack) - add vbus regulators on exynos3250, exynos4210 and exynos4412 boards - fix typo in regulator enable GPIO property on s5pv20-aquila and goni - document: correct the example of exynos power domain clocks - document: consolidate exynos SoC dt-bindings and non-Samsung boards related compatibles (FriendlyARM, Google, Hardkernel and Insignal) - update MAINTAINER entries accordingly (documentation) * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: MAINTAINERS: Add documentation and dt-bindings for exynos stuff dt-bindings: EXYNOS: Document compatibles from other vendors dt-bindings: Consolidate Exynos SoC bindings ARM: dts: Add clocks to DISP1 domain in exynos5250 dt-bindings: Correct the example for Exynos power domain clocks ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards clk: samsung: exynos5250: Add DISP1 clocks ARM: dts: use exynos5420-dw-mshc compatible for exynos3250 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26Merge tag 'tegra-for-4.4-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Devicetree changes for v4.4-rc1 Mostly a bunch of updates to the Toradex Apalis and Colibri platforms along with a couple of cleanup patches. * tag 'tegra-for-4.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) ARM: tegra: Use consistent indentation for SATA node ARM: tegra: colibri-eval: Fix power/wakeup key ARM: tegra: colibri-eval: Add comment concerning SD/MMC ARM: tegra: colibri-eval: Fix vendor string of M41T0M6 RTC ARM: tegra: colibri: Properly align pin names ARM: tegra: colibri: Replace eMMC label by comment ARM: tegra: colibri: Activate STMPE811 touch controller ARM: tegra: colibri: Add touch pen interrupt pin muxing ARM: tegra: colibri: Fix comment about 3v3 fixed supply ARM: tegra: colibri: Add pin muxing for on-module power I2C ARM: tegra: colibri: Improve comment about thermal alert pin ARM: tegra: colibri: Fix HDMI supplies ARM: tegra: colibri: Update hardware revisions compatibility ARM: tegra: apalis-eval: Fix power/wakeup key ARM: tegra: apalis-eval: Fix backlight PWM comment ARM: tegra: apalis-eval: Set OTG dr_mode ARM: tegra: apalis-eval: Enable HDA controller ARM: tegra: apalis: Properly align pin names ARM: tegra: apalis: Add digital audio pin muxing ARM: tegra: apalis: Add comment concerning eMMC ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'at91-ab-dt2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Merge "Second batch of DT changes for 4.4" from Alexandre Belloni: - some DT fixes: pullups, disabled property - the PMC is now a syscon - great improvement of sama5d2 support * tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/dt: sama5d2: add missing devices ARM: at91/dt: sama5d4: add the macb1 node ARM: at91/dt: add pullup on mmc2 data signals ARM: at91/dt: sama5d2_xplained: add regulator nodes ARM: at91/dt: fix "disabled" property on at91rm9200 ARM: at91/dt: use syscon for PMC
2015-10-23Merge tag 'omap-for-v4.4/dt-pt2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v4.4 merge window, part 2" from Tony Lindgren: Few more omap dts changes for v4.4 merge window, mostly to fix and clean up some omap5 issues to allow adding other omap5 boards. Also some other fixes and clean-up: - Fix SDIO WLAN for omap5 that's been broken for a while. As further patches are still needed for wl18xx, no need for stable on this one. - Move most of omap5 support into omap5-board-common.dtsi as most omap5 boards seem to share the same basic set of devices. - Add minimal IGEPv5 support using based on omap5-board-common.dtsi - Remove now unneedes gpio hogging for dra72-evm - Update Javier Martinez Canillas email address - Change earlier IGEP boards to use IOPAD pinmux macros * tag 'omap-for-v4.4/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-base0033: Use IOPAD pinmux macro ARM: dts: am335x-igep0033: Use IOPAD pinmux macro ARM: dts: omap3-igep0020: Use IOPAD pinmux macro ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts ARM: dts: Update Javier Martinez Canillas's email ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios ARM: dts: Add basic support for isee igepv5 ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi ARM: dts: Fix WLAN regression on omap5-uevm
2015-10-23ARM: dts: uniphier: add ProXstream2 Vodka board supportMasahiro Yamada
Initial version of DTS for ProXstream2 Vodka board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23ARM: dts: uniphier: add ProXstream2 Gentil board supportMasahiro Yamada
Initial version of DTS for ProXstream2 Gentil board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23ARM: dts: uniphier: use stdout-path instead of consoleMasahiro Yamada
Specifying both console and stdout-path is redundant. Add options ":115200n8" to stdout-path and drop "console=ttyS0,115200". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23Merge tag 'sti-dt-for-v4.4-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt Merge "STi DT changes for v4.4, round 2" from Maxime Coquelin: - Use STiH418's A9 PLL - Add Ethernet support to STiH407 family * tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: STi: DT: Add support for stih418 A9 pll ARM: dts: Enable Ethernet on STi's B2199 board ARM: dts: Enable Ethernet on STi's B2120 boards ARM: dts: Add Ethernet node to STiH407 family ARM: dts: Fix RGMII pinctrl timings
2015-10-23ARM: dts: WM8750: fix cpu compatible valueVladimir Zapolskiy
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23ARM: dts: TI-Nspire: fix cpu compatible valueVladimir Zapolskiy
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-24ARM: dts: Add clocks to DISP1 domain in exynos5250Tomeu Vizoso
Adds to the node of the DISP1 power domain the two clocks that need to be reparented while the domain is powered off: CLK_MOUT_ACLK200_DISP1_SUB and CLK_MOUT_ACLK300_DISP1_SUB. Otherwise the state is unknown at power up and the mixer's clocks are all messed up. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/561CDC33.7050103@collabora.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goniLaurent Pinchart
The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquilaLaurent Pinchart
The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and ↵Marek Szyprowski
exynos4412 boards Exynos USB2 PHY driver now supports VBUS regulator, so add it to all boards which have it available. This also fixes commit 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2"), which added new regulators to Trats2 board, but without linking them to the consumers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24ARM: dts: use exynos5420-dw-mshc compatible for exynos3250Jaehoon Chung
There are some differences of mobile storage host between exynos3250 and exnos5250. For example, exynos3250 supports the HS400 mode, but exynos5250 doesn't support it. Since exynos3250 can perform the similar function with exynos5420 compatible, this patch changes the compatible from exynos5250 to exynos5420 for mshc. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-23Merge tag 'imx-dt-4.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree changes for 4.4: - Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D. - Add a few low power mode related devices and touch controller for i.MX6UL. - Add a number of devices for i.MX7D SDB board support, USB, Dual FEC, and eMMC5.0. - i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya LCD, touch and wifi support, add new boards Nitrogen6_Lite and Nitrogen6_Max. - Enable touch screen and NAND Flash controller for a few Vybrid devices. - Some random and small updates on LS1021A and MXS support. * tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: ls1021a: Add quirk for Erratum A009116 ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names" ARM: dts: imx6: change the core clock of spdif ARM: dts: vf-colibri: enable NAND flash controller ARM: dts: vf610twr: add NAND flash controller peripherial ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board ARM: dts: imx: add Boundary Devices Nitrogen6_Max board ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices of: Add Boundary Devices Inc. vendor prefix ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support ARM: dts: imx6dql-nitrogen6x: add touchscreen support ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel ARM: dts: vf500-colibri: Add device tree node for touchscreen support ARM: dts: i.MX35: fix cpu compatible value ARM: dts: i.MX31: fix cpu compatible value ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson
Delete regulator-compatible usage in mt8135-evbp1.dts. The regualtor-compatible binding is deprecated, instead the node name is used. Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add these SOCs to the bindings list. Power domains venc and venc_lt need clocks two extra clocks to access their registers. We update the bindings documentation about this. Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs. Update mt8127.dtsi and mt8135.dtsi to enable SMP support. * tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek: ARM: dts: mt8127: enable basic SMP bringup for mt8127 ARM: dts: mt8135: enable basic SMP bringup for mt8135 devicetree: bindings: add new SMP enable method Mediatek SoC dt-bindings: soc: Add clocks for Mediatek SCPSYS unit dt-bindings: add more MediaTek SoC to mtk-timer binding ARM: dts: mt8135-evbp1: remove regulator-compatible usage Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'v4.4-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt SPDIF device nodes for the newly added driver. * tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square ARM: dts: rockchip: Add SPDIF transceiver for RK3288 ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock ARM: dts: rockchip: Add SPDIF transceiver for RK3188 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'sunxi-dt-for-4.4-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.4, round 2 More DT patches for 4.4, mostly with new boards coming in (CHIP, BananaPi M2, pcduino2), further consolidation for the q8-based designs and a bunch of random patches enhancing support for existing boards * tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits) ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board ARM: dts: sun6i: Add mmc2_pins_a pinmux setting to sun6i-a31.dtsi ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 ARM: dts: sun8i: Add NMI interrupt controller node ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus" ARM: dts: sun6i: hummingbird: Use axp22x.dtsi for AXP221 regulators ARM: dts: sun6i: hummingbird: Fix VDD-CPU and VDD-GPU regulator names ARM: dts: sun7i: Add regulator configuration for pcDuino v3 Nano ARM: dts: sun6i: Turn on gmac on Colombus ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi ARM: dts: sunxi: Enable PWM controller on Q8 format tablets ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s ARM: dts: sun5i: Add PWM controller node for A13 / A10s ARM: sun5i: Add C.H.I.P DTS ARM: dts: sunxi: Add dtsi for AXP22x PMIC ARM: dts: sun7i: Correct USB regulators on pcDuino v3 Nano ARM: sun5i: dt: Add UART3 CTS and RTS pins ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23ARM: bcm2835: Add the DDC I2C controller to the device tree.Eric Anholt
We need to use it for getting video modes over HDMI. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-10-23ARM: bcm2835: Switch to using the new clock driver support.Eric Anholt
This will give us the ability to set the pixel and HDMI state machine clocks for the VC4 KMS driver, change the CPU frequency, and potentially gate clocks in the future (once we also write a power domain driver). It also gives the uart an explicit clock reference, so that we don't need to change the physical addresses of the old fixed clk_bcm2835.c clocks for Raspberry Pi 2 port. Two clocks get their frequencies updated as a result of this. One is uart's apb_pclk, which was previously accidentally grabbing the fixed uart0_pclk due to the apb_pclk not having clk_register_clkdev() called. The uart doesn't seem to do anything with apb_pclk other than make sure it's on, so that appears safe (also, as far as I can see, the apb clock is actually the same as the VPU clock). The other is EMMC, which according to the docs was supposed to be in the 50-100Mhz range, but it turns out the firmware needed to change to running it at the 250Mhz core clock speed to avoid a bug in clock domain crossing. Additionally, anything using BCM2835_CLOCK_VPU will now have a correct clock rate if the user configures the boot-time core clock speed using config.txt. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-10-23ARM: dts: sun6i: Add dts file for MSI Primo81 tabletKarsten Merker
The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND, 768x1024 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons (both volume buttons are also connected to the UBOOT_SEL pin). The external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB OTG and 3.5mm headphone jack. USB OTG is enabled in host only mode. AXP221 USB power supply and GPIO support are required for full USB OTG support. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-23ARM: dts: sun6i: Add simplefb node labels to reference at board levelChen-Yu Tsai
Some boards, such as tablets, have regulators providing power to parts of the display pipeline, like signal converters and LCD panels. Add labels to the simplefb device nodes so that we can reference them in the board dts files to add regulator supply properties. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-22ARM: dts: sun4i: Enable audio codec on Marsboard A10.Aleksei Mamlin
Enable on-chip audio codec on the Marsboard A10. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-22Merge tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
mvebu dt for 4.4 (part 2) - Add support for severals Armada-370-based Seagate NAS - Fix Ready NAS device tree - Modify SDHCI binding for A388-GP allowing using it on old and new version of the board * tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: set SW polling as SDHCI card detection on A388-GP arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 ARM: mvebu: add DT support for Seagate Personal Cloud ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-22Merge tag 'socfpga_for_v4.4_cleanup' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA dts cleanup for v4.4 - Re-order DTS nodes into correct alphabetical order * tag 'socfpga_for_v4.4_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: sort nodes alphabetically Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-22Merge tag 'socfpga_dts_for_v4.4_part_2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS update for v4.4, part 2 - Add the FPGA manager node * tag 'socfpga_dts_for_v4.4_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add fpga manager Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-22ARM: dts: fix gpio-keys wakeup-source propertySudeep Holla
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the two boolean properties to enable gpio buttons as wakeup source: 1. "wakeup-source" or 2. the legacy "gpio-key,wakeup" However juno, ste-snowball and emev2-kzm9d dts file have a undetected "wakeup" property to indictate the wakeup source. This patch fixes it by making use of "wakeup-source" property. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-22ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tabletHans de Goede
The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18, this only works when ldo3 is set to 2.8 volt, otherwise i2c1 gets stuck, so for now we mark i2c1 as failed. It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr 0x5c. This is not enabled in this dts, because this variant of the pixcir_tangoc has separate wakeup and enable pins both of which need to be driven low before the touchscreen will work. Before we can enable this the pixcir driver and devicetree-bindings need to be extended to support these pins. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-22ARM: sun4i: Enable cubieboard audio codecChen-Yu Tsai
The cubieboard uses the internal codec to output sound to its mini-jack. Enable it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-22ARM: sun5i: chip: Enable the audio codecMaxime Ripard
The CHIP v0.2 has a composite output on a mini-jack connector, the audio part being provided by the on-SoC codec. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-22ARM: sun4i: Enable audio-codec on Mele A1000Marcus Cooper
Enable the audio-codec on the Mele A1000 top-set box. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-22ARM: sun7i: Enable cubieboard2 audio codecMaxime Ripard
The cubieboard2 uses the internal codec to output sound to its mini-jack. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-22ARM: sun7i: dt: enable audio codec on CubietruckEmilio López
This commit enables the on-chip audio codec present on the A20 SoC for the Cubietruck. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-21ARM: sun7i: Add sunxi codec device nodeEmilio López
The A20 SoC includes the Allwinner audio codec, capable of both 24-bit playback and capture. This commit adds a device node for it. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-21ARM: sun5i: Add the Audio codec DT nodeMaxime Ripard
The A13 and A10s also have the audio codec present. List it in the device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-21ARM: sun4i: Add sunxi codec device nodeMarcus Cooper
The A10 SoC includes the Allwinner audio codec, capable of both 24-bit playback and capture. This commit adds a device node for it. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-10-21ARM: sun7i: Add audio codec clockMaxime Ripard
The audio codec functional clock is a child of PLL2 and is used to control the audio rate, enable it in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>