aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun5i-a13.dtsi
AgeCommit message (Collapse)Author
2014-02-07ARM: sunxi: dt: Change the touchscreen compatiblesMaxime Ripard
Switch the device tree touchscreen compatibles to have a common pattern accross all Allwinner SoCs. Since the touchscreen driver has not been merged yet, it has no side effect. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-01-23Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-01ARM: dts: sun5i: Add rtp controller nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: dt: add nodes for the mbus clockEmilio López
mbus is the memory bus clock, and it is present on both sun5i and sun7i machines. Its register layout is compatible with the mod0 one. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sun5i: dt: mod0 clocksEmilio López
This commit adds all the mod0 clocks available on A10 and A13. The list has been constructed by looking at the Allwinner code release for A10S and A13. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL5 and PLL6 supportEmilio López
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i device trees. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28ARM: sunxi: add PLL4 supportEmilio López
This commit adds the PLL4 definition to the sun4i, sun5i and sun7i device trees. PLL4 is compatible with PLL1. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-11ARM: sun5i: a13: Add support for the High Speed TimersMaxime Ripard
The Allwinner A13 has support for two high speed timers. Now that we have a driver to support it, we can enable them in the device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-09-16ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7iOliver Schinagl
This patch shall add support for the sunxi-sid driver to the device tree for A10, A10s, A13 and A20. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun5i: dt: Fix A13 SoC bus base addressMaxime Ripard
There was a typo in the base address used for the soc node in the A13 device tree. Fix it with the proper base address. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun5i: a13: Remove useless simple-bus reg propertyMaxime Ripard
The reg property of the simple-bus driver is completely useless. Remove it from the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-20Merge tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux into next/dtArnd Bergmann
From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-15ARM: sun5i: dt: Add i2c muxing optionsMaxime Ripard
The i2c controller found on the Allwinner A13 has only one muxing option available for each controller. Add them to the dtsi Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
2013-06-15ARM: sunxi: dt: Add i2c controller nodes to the DTSIMaxime Ripard
The Allwinner A10 and A13 both have 3 i2c controller embedded. Add those to the common sunxi dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
2013-06-14Merge tag 'sunxi-dt-for-3.11' of git://github.com/mripard/linux into next/dtOlof Johansson
From Maxime Ripard: Allwinner SoCs DT additions for 3.11 - Switch to using the sun5i clocks for the A13 - Register the pio node as an interrupt controller * tag 'sunxi-dt-for-3.11' of git://github.com/mripard/linux: ARM: sunxi: dt: Register the pio node as interrupt controller ARM: sun5i: Update the clock compatible strings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-10ARM: sunxi: dt: Register the pio node as interrupt controllerMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-10ARM: dts: add missing cpu #address-cell valuesArnd Bergmann
A recent series has added CPU numbers to a lot of dts files, but unfortunately in a few cases the #address-cells and #size-cells values are missing, which causes build warnings. This adds the missing ones for sunxi and sama5 that I found through build testing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-05-23ARM: dts: sunxi: cpus/cpu nodes dts updatesLorenzo Pieralisi
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-05-15ARM: sun5i: Update the clock compatible stringsMaxime Ripard
The Allwinner A13 has a smaller clock set than the one found in the A10. Fix the A13 device tree and documentation to reflect this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-15ARM: sunxi: unify osc24M_fixed and osc24MEmilio López
Now that the clock driver supports the gatable oscillator as one single clock, drop osc24M_fixed and move the relevant properties to osc24M Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update watchdog compatible stringMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update interrupt controller compatible stringMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Update timer compatible stringMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-08ARM: sunxi: dt: Reorganize the dtsiMaxime Ripard
In the early days, the A10 and A13 shared quite some code. Nowadays it shares less and less code, the A31 diverging even more, so it doesn't make much sense to continue to maintain this structure, just use one DTSI for every SoC, and that's it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-04arm: sunxi: Add clock to pinctrl nodeEmilio López
The port controller needs the apb0_pio clock enabled to be able to work. This commit declares that on the device tree. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-03-05sunxi: dts: Report the pinctrl nodes as gpio-controllersMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-01-22ARM: sunxi: Add uart1 pinctrl groupsMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22ARM: sunxi: Add pinctrl node to the device treeMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-20ARM: sunxi: rename device tree source filesOlof Johansson
This is the rename portion of "ARM: sunxi: Change device tree naming scheme for sunxi" that were missed when the patch was applied. Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 20:37:50 +0000