aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7791-henninger.dts
AgeCommit message (Collapse)Author
2015-05-21ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor"Geert Uytterhoeven
Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"') Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: henninger dts: Add "nor-jedec" compatible valueGeert Uytterhoeven
Spansion s25fl512s is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: henninger: add CAN0 DT supportSergei Shtylyov
Define the Henninger board dependent part of the CAN0 device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-21ARM: shmobile: henninger dts: Replace status value "ok" by "okay"Geert Uytterhoeven
While the DT parsing code recognizes "ok" as a valid value for the "status" property, ePAPR v1.1 doesn't mention it in the list of valid values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: henninger: enable HS-USBYoshihiro Shimoda
Enable HS-USB device for the Henninger board, defining the GPIO that the driver should check when probing (which is the ID output from MAX3355 OTG chip). Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [Sergei: added pin function/group and prop, moved device node, fixed summary, added changelog] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: henninger: enable USB PHYSergei Shtylyov
Enable USB PHY device for the Henninger board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-24ARM: shmobile: henninger dts: Add chosen/stdout-pathGeert Uytterhoeven
Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=ttySC0,38400" parameter in chosen/bootargs, else the console will use the default setting of 115200 baud. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-17ARM: shmobile: henninger: add VIN0/ADV7180 DT supportSergei Shtylyov
Define the Henninger board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-09ARM: shmobile: henninger: Consistently use tabs for indentationSimon Horman
Unify white space usage by consistently using tabs for indentation. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-08ARM: shmobile: henninger: enable internal PCISergei Shtylyov
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [horms+renesas@verge.net.au: minor witespace changes] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: henninger: Enable PCIe Controller & PCIe bus clockPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: henninger: add I2C2 DT supportSergei Shtylyov
Define the Henninger board dependent part of the I2C2 device node. Based on the Koelsch I2C2 device tree patch by Wolfram Sang. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11ARM: shmobile: henninger: add MSIOF0 DT supportSergei Shtylyov
Define the Henninger board dependent part of the MSIOF0 device node. Add device node for Renesas R2A11302FT PMIC for which no bindings exist yet. Based on the Koelsch MSIOF device tree patch by Geert Uytterhoeven. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11ARM: shmobile: henninger: add QSPI DT supportSergei Shtylyov
Define the Henninger board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11ARM: shmobile: henninger: add SDHI0/2 DT supportSergei Shtylyov
Define the Henninger board dependent part of the SDHI0/2 device nodes along with the necessary voltage regulators (note that the Vcc regulators are dummy -- they are required but don't actually exist on the board). Also, GPIOs have to be used for the CD and WP signals due to the SDHI driver constraints... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-02ARM: shmobile: henninger: specify EXTAL frequencySergei Shtylyov
When creating the initial device tree for the Henninger board, I've overlooked that EXTAL frequency needs to be overridden there. The 'sh-sci' driver managed to work somehow but the SDHI driver that I've tried to enable just hanged with the default EXTAL frequency of 0... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-28ARM: shmobile: henninger: enable SATA0Sergei Shtylyov
Enable SATA0 device for the Henninger board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-25ARM: shmobile: henninger: add Ether DT supportSergei Shtylyov
Define the Henninger board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-25ARM: shmobile: henninger: initial device treeSergei Shtylyov
Add the initial device tree for the R8A7791 SoC based Henninger board. SCIF0 serial port support is included, so that the serial console can work. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>