path: root/Documentation
AgeCommit message (Collapse)Author
2013-05-17block: remove refs to XD disks from documentationLinus Walleij
Commit d1a6f4f19728d6e90480e53601a90fc9f6a348ad "block: delete super ancient PC-XT driver for 1980's hardware" deleted the XD disk driver, but there are still a few references to it in the documentation directory. Delete the remnants and thus also free up the major block device 13 for reuse. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-05-16Merge tag 'pm+acpi-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: - intel_pstate driver fixes and cleanups from Dirk Brandewie and Wei Yongjun. - cpufreq fixes related to ARM big.LITTLE support and the cpufreq-cpu0 driver from Viresh Kumar. - Assorted cpufreq fixes from Srivatsa S Bhat, Borislav Petkov, Wolfram Sang, Alexander Shiyan, and Nishanth Menon. - Assorted ACPI fixes from Catalin Marinas, Lan Tianyu, Alex Hung, Jan-Simon Möller, and Rafael J Wysocki. - Fix for a kfree() under spinlock in the PM core from Shuah Khan. - PM documentation updates from Borislav Petkov and Zhang Rui. * tag 'pm+acpi-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits) cpufreq: Preserve sysfs files across suspend/resume ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error path PM / hibernate: Correct documentation PM / Documentation: remove inaccurate suspend/hibernate transition lantency statement PM: Documentation update for freeze state cpufreq / intel_pstate: use vzalloc() instead of vmalloc()/memset(0) cpufreq, ondemand: Remove leftover debug line PM: Avoid calling kfree() under spinlock in dev_pm_put_subsys_data() cpufreq / kirkwood: don't check resource with devm_ioremap_resource cpufreq / intel_pstate: remove #ifdef MODULE compile fence cpufreq / intel_pstate: Remove idle mode PID cpufreq / intel_pstate: fix ffmpeg regression cpufreq / intel_pstate: use lowest requested max performance cpufreq / intel_pstate: remove idle time and duration from sample and calculations cpufreq: Fix incorrect dependecies for ARM SA11xx drivers cpufreq: ARM big LITTLE: Fix Kconfig entries cpufreq: cpufreq-cpu0: Free parent node for error cases cpufreq: cpufreq-cpu0: defer probe when regulator is not ready cpufreq: Issue CPUFREQ_GOV_POLICY_EXIT notifier before dropping policy refcount cpufreq: governors: Fix CPUFREQ_GOV_POLICY_{INIT|EXIT} notifiers ...
2013-05-15Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - Two fixlets for the fallout of the generic idle task conversion - Documentation update * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit idle: Fix hlt/nohlt command-line handling in new generic idle kthread: Document ways of reducing OS jitter due to per-CPU kthreads
2013-05-15xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off.Konrad Rzeszutek Wilk
There is no point. We would just squeeze the guest to put more and more pages in the swap disk without any purpose. The only time it makes sense to use the selfballooning and shrinking is when frontswap is being utilized. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15xen/tmem: Remove the boot options and fold them in the tmem.X parameters.Konrad Rzeszutek Wilk
If tmem is built-in or a module, the user has the option on the command line to influence it by doing: tmem.<some option> instead of having a variety of "nocleancache", and "nofrontswap". The others: "noselfballooning" and "selfballooning"; and "noselfshrink" are in a different driver xen-selfballoon.c and the patches: xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the usage of 'noselfballoon','selfballoon' and use 'tmem.selfballon' bool instead. remove them. Also add documentation. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15Merge branch 'bcache-for-upstream' of ↵Jens Axboe
git://evilpiepirate.org/~kent/linux-bcache into for-linus Kent writes: Jens - couple more bcache patches. Bug fixes and a doc update.
2013-05-15bcache: clarify free/available/unused spaceGabriel
Don't describe bcache_available_percent as free space but as non-writeback space. Describe priority_stats in more detail and point to that for total bcache occupation. Signed-off-by: Gabriel de Perthuis <g2p.code+bcache@gmail.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-05-14ARM: at91/trivial: typo in GEM compatible stringNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-14PM / hibernate: Correct documentationBorislav Petkov
Correct the meaning of PM_HIBERNATION_PREPARE in the docs. References: http://lkml.kernel.org/r/20130512162717.GA6305@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-14PM / Documentation: remove inaccurate suspend/hibernate transition lantency ↵Zhang Rui
statement The lantency of the transition from suspend and hibernate is platform-dependent. Thus we should not refer the lantency in the documentation. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-14PM: Documentation update for freeze stateZhang Rui
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-10Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
2013-05-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes and straggler patches from Olof Johansson: "A collection of fixes for fall out from 3.10 merge window, some build fixes and warning cleanups and a small handful of patches that were small and contained and made sense to still include in 3.10 (some of these have also been in -next since the merge window opened). Largest continous series is for OMAP, but there's a handful for other platforms. For i.MX, one of the patches are framebuffer fixups due to fallout during the merge window, and the other removes some stale and broken code." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: dts: Fixed vbus-gpios ARM: EXYNOS5: Fix kernel dump in AFTR idle mode ARM: ux500: Rid ignored return value of regulator_enable() compiler warning ARM: ux500: read the correct soc_id number ARM: exynos: dts: cros5250: add cyapa trackpad video: mxsfb: Adapt to new videomode API ARM: imx: Select GENERIC_ALLOCATOR ARM: imx: compile fix for hotplug.c ARM: dts: don't assume boards are using twl4030 for omap3 ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c ARM: dts: Configure and fix the McSPI pins for 4430sdp ARM: dts: AM33XX: Add GPMC node ARM: dts: OMAP4460: Fix CPU OPP voltages ARM: dts: OMAP36xx: Fix CPU OPP voltages ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si omap: mux: add AM/DM37x gpios ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() ARM: OMAP2+: omap_device: use late_initcall_sync ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices ...
2013-05-09Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull xtensa updates from Chris Zankel: "Support for the latest MMU architecture that allows for a larger accessible memory region, and various bug-fixes" * tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux: xtensa: Switch to asm-generic/linkage.h xtensa: fix redboot load address xtensa: ISS: fix timer_lock usage in rs_open xtensa: disable IRQs while IRQ handler is running xtensa: enable lockdep support xtensa: fix arch_irqs_disabled_flags implementation xtensa: add irq flags trace support xtensa: provide custom CALLER_ADDR* implementations xtensa: add stacktrace support xtensa: clean up stpill_registers xtensa: don't use a7 in simcalls xtensa: don't attempt to use unconfigured timers xtensa: provide default platform_pcibios_init implementation xtensa: remove KCORE_ELF again xtensa: document MMUv3 setup sequence xtensa: add MMU v3 support xtensa: fix ibreakenable register update xtensa: fix oprofile building as module
2013-05-09Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Omap fixes for things that were discovered during the merge window: - Few GPMC fixes and binding doc updates noted after sending pull requests for the GPMC branch. - Board fixes for beagle usb host and rx51 spi probe order - SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error handling fixes Then few minor things that are not strictly fixes but are good to get out of the way: - Add missing legacy mux registers for am/dm73x gpio - Add detection for am33xx pg2.1 silicon - Enable twl4030 audio modules in defconfig * tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si omap: mux: add AM/DM37x gpios ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() ARM: OMAP2+: omap_device: use late_initcall_sync ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx ARM: OMAP2+: only WARN if a GPMC child probe function fail ARM: OMAP2+: only search for GPMC DT child nodes on probe Documentation: dt: update properties in TI GPMC NAND example Documentation: dt: update TI GPMC ethernet binding properties Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs update from Chris Mason: "These are mostly fixes. The biggest exceptions are Josef's skinny extents and Jan Schmidt's code to rebuild our quota indexes if they get out of sync (or you enable quotas on an existing filesystem). The skinny extents are off by default because they are a new variation on the extent allocation tree format. btrfstune -x enables them, and the new format makes the extent allocation tree about 30% smaller. I rebased this a few days ago to rework Dave Sterba's crc checks on the super block, but almost all of these go back to rc6, since I though 3.9 was due any minute. The biggest missing fix is the tracepoint bug that was hit late in 3.9. I ran into problems with that in overnight testing and I'm still tracking it down. I'll definitely have that fixed for rc2." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (101 commits) Btrfs: allow superblock mismatch from older mkfs btrfs: enhance superblock checks btrfs: fix misleading variable name for flags btrfs: use unsigned long type for extent state bits Btrfs: improve the loop of scrub_stripe btrfs: read entire device info under lock btrfs: remove unused gfp mask parameter from release_extent_buffer callchain btrfs: handle errors returned from get_tree_block_key btrfs: make static code static & remove dead code Btrfs: deal with errors in write_dev_supers Btrfs: remove almost all of the BUG()'s from tree-log.c Btrfs: deal with free space cache errors while replaying log Btrfs: automatic rescan after "quota enable" command Btrfs: rescan for qgroups Btrfs: split btrfs_qgroup_account_ref into four functions Btrfs: allocate new chunks if the space is not enough for global rsv Btrfs: separate sequence numbers for delayed ref tracking and tree mod log btrfs: move leak debug code to functions Btrfs: return free space in cow error path Btrfs: set UUID in root_item for created trees ...
2013-05-09Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This time we have dmatest improvements from Andy along with dw_dmac fixes. He has also done support for acpi for dmanegine. Also we have bunch of fixes going in DT support for dmanegine for various folks. Then Haswell and other ioat changes from Dave and SUDMAC support from Shimoda." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) dma: tegra: implement suspend/resume callbacks dma:of: Use a mutex to protect the of_dma_list dma: of: Fix of_node reference leak dmaengine: sirf: move driver init from module_init to subsys_initcall sudmac: add support for SUDMAC dma: sh: add Kconfig at_hdmac: move to generic DMA binding ioatdma: ioat3_alloc_sed can be static ioatdma: Adding write back descriptor error status support for ioatdma 3.3 ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap ioatdma: Adding support for 16 src PQ ops and super extended descriptors ioatdma: Removing hw bug workaround for CB3.x .2 and earlier dw_dmac: add ACPI support dmaengine: call acpi_dma_request_slave_channel as well dma: acpi-dma: introduce ACPI DMA helpers dma: of: Remove unnecessary list_empty check DMA: OF: Check properties value before running be32_to_cpup() on it DMA: of: Constant names ioatdma: skip silicon bug workaround for pq_align for cb3.3 ioatdma: Removing PQ val disable for cb3.3 ...
2013-05-09Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "The most important one is to build thermal core and governor and cpu cooling code into one module. This fixes a regression that thermal core does not work if it is built as module, since 3.7. I'll backport them to stable kernel once those changes are in upstream. The largest batch is the thermal kernel-doc & coding style updates/cleanups from Eduardo. Highlights: - build all thermal framework code into one module to fix a regression that thermal does not work if it is built as module. - Marvell Armada 370/XP thermal sensor driver - thermal core/cpu cooling kernel-doc & coding style updates and cleanups. - Add Eduardo Valentin as thermal sub-maintainer, both in mailing list and patchwork. He will help me on arm thermal drivers." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (68 commits) thermal: db8500_cpufreq_cooling: remove usage of IS_ERR_OR_NULL() thermal: thermal_core: remove usage of IS_ERR_OR_NULL thermal: cpu_cooling: improve line breaking thermal: cpu_cooling: alignment improvements thermal: cpu_cooling: remove checkpatch.pl warning thermal: cpu_cooling: remove trailing blank line thermal: cpu_cooling: align on open parenthesis thermal: cpu_cooling: standardize comment style thermal: cpu_cooling: standardize end of function thermal: cpu_cooling: remove trailing white spaces Thermal: update documentation for thermal_zone_device_register thermal: update kernel-doc for thermal_zone_device_register thermal: update kernel-doc for create_trip_attrs thermal: update kernel-doc for thermal_cooling_device_register thermal: update kernel-doc for thermal_zone_unbind_cooling_device thermal: update kernel-doc for thermal_zone_bind_cooling_device thermal: use EXPORT_SYMBOL_GPL thermal: rename notify_thermal_framework to thermal_notify_framework thermal: update driver license thermal: use strlcpy instead of strcpy ...
2013-05-09xtensa: document MMUv3 setup sequenceMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-08Merge branch 'omap-gpmc-fixes-for-v3.10' of git://github.com/jonhunter/linux ↵Tony Lindgren
into fixes
2013-05-08Merge tag 'f2fs-for-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches. - introduce a new gloabl lock scheme - add tracepoints on several major functions - fix the overall cleaning process focused on victim selection - apply the block plugging to merge IOs as much as possible - enhance management of free nids and its list - enhance the readahead mode for node pages - address several cretical deadlock conditions - reduce lock_page calls The other minor bug fixes and enhancements are as follows. - calculation mistakes: overflow - bio types: READ, READA, and READ_SYNC - fix the recovery flow, data races, and null pointer errors" * tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits) f2fs: cover free_nid management with spin_lock f2fs: optimize scan_nat_page() f2fs: code cleanup for scan_nat_page() and build_free_nids() f2fs: bugfix for alloc_nid_failed() f2fs: recover when journal contains deleted files f2fs: continue to mount after failing recovery f2fs: avoid deadlock during evict after f2fs_gc f2fs: modify the number of issued pages to merge IOs f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry. f2fs: fix inconsistent using of NM_WOUT_THRESHOLD f2fs: check truncation of mapping after lock_page f2fs: enhance alloc_nid and build_free_nids flows f2fs: add a tracepoint on f2fs_new_inode f2fs: check nid == 0 in add_free_nid f2fs: add REQ_META about metadata requests for submit f2fs: give a chance to merge IOs by IO scheduler f2fs: avoid frequent background GC f2fs: add tracepoints to debug checkpoint request f2fs: add tracepoints for write page operations f2fs: add tracepoints to debug the block allocation ...
2013-05-08Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge more incoming from Andrew Morton: - Various fixes which were stalled or which I picked up recently - A large rotorooting of the AIO code. Allegedly to improve performance but I don't really have good performance numbers (I might have lost the email) and I can't raise Kent today. I held this out of 3.9 and we could give it another cycle if it's all too late/scary. I ended up taking only the first two thirds of the AIO rotorooting. I left the percpu parts and the batch completion for later. - Linus * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits) aio: don't include aio.h in sched.h aio: kill ki_retry aio: kill ki_key aio: give shared kioctx fields their own cachelines aio: kill struct aio_ring_info aio: kill batch allocation aio: change reqs_active to include unreaped completions aio: use cancellation list lazily aio: use flush_dcache_page() aio: make aio_read_evt() more efficient, convert to hrtimers wait: add wait_event_hrtimeout() aio: refcounting cleanup aio: make aio_put_req() lockless aio: do fget() after aio_get_req() aio: dprintk() -> pr_debug() aio: move private stuff out of aio.h aio: add kiocb_cancel() aio: kill return value of aio_complete() char: add aio_{read,write} to /dev/{null,zero} aio: remove retry-based AIO ...
2013-05-07mm, memcg: add rss_huge stat to memory.statDavid Rientjes
This exports the amount of anonymous transparent hugepages for each memcg via the new "rss_huge" stat in memory.stat. The units are in bytes. This is helpful to determine the hugepage utilization for individual jobs on the system in comparison to rss and opportunities where MADV_HUGEPAGE may be helpful. The amount of anonymous transparent hugepages is also included in "rss" for backwards compatibility. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08DT: add documentation for the Ralink MIPS SoCsGabor Juhos
This patch adds binding documentation for the compatible values of the Ralink MIPS SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5187/
2013-05-08DT: add vendor prefixes for RalinkJohn Crispin
Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-05-07Merge tag 'multiplatform-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...
2013-05-07Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-07Merge tag 'soc-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
2013-05-07Merge branch 'misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild updates from Michal Marek: "Non-critical kbuild changes: - make coccicheck improvements, but no new semantic patches this time - make rpm improvements - make tar-pkg change to include the architecture in the filename. This is a deliberate incompatibility, but nobody has complained so far and it is useful if you build for different architectures. It also matches what the deb-pkg and rpm-pkg targets produce. - kbuild documentation fix" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: rpm-pkg: Remove pointless set -e statements rpm-pkg: Always regenerate the specfile rpm-pkg: Do not write to the parent directory rpm-pkg: Do not package the whole source directory buildtar: Add ARCH to the archive name Coccinelle: Fix patch output when coccicheck is used with M= and C= Coccinelle: Add support to the SPFLAGS variable Coccinelle: Cleanup the setting of the FLAGS and OPTIONS variables Coccinelle: Restore coccicheck verbosity in ONLINE mode (C=1 or C=2) scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT doc: change example to existing Makefile fragment scripts/tags.sh: Add magic for OFFSET and DEFINE
2013-05-07Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: - use pkg-config to detect curses libraries - clean up the way curses headers are searched - Some randconfig fixes, of which one had to be reverted - KCONFIG_SEED for randconfig debugging - memuconfig memory leak plugged - menuconfig > breadcrumbs > navigation - xconfig compilation fix - Other minor fixes * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: fix lists definition for C++ Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: implement KCONFIG_PROBABILITY for randconfig kconfig: allow specifying the seed for randconfig kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: do not override symbols already set kconfig: fix randconfig tristate detection kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h menuconfig: Add "breadcrumbs" navigation aid menuconfig: Fix memory leak introduced by jump keys feature merge_config.sh: Avoid creating unnessary source softlinks kconfig: optionally use pkg-config to detect ncurses libs menuconfig: optionally use pkg-config to detect ncurses libs
2013-05-07Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: "Kbuild commits for v3.10-rc1: - Fix make mrproper after mod/file2alias rework - Fix ld-option Makefile function - Rewrite headers_install to shell to drop Perl dependency. There are some more patches I have to look at, so I might send another pull request later. Or just queue them for 3.11." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix cleaning in scripts/mod headers_install.pl: convert to headers_install.sh kbuild: fix ld-option function
2013-05-07Merge branch 'for-next' of git://sources.calxeda.com/kernel/linux into HEADGrant Likely
2013-05-06Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: - move LED trigger drivers into a new directory - lp55xx common driver updates - other led drivers updates and bug fixing * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions leds: lp55xx: configure the clock detection leds: lp55xx: use common clock framework when external clock is used leds: leds-ns2: fix oops at module removal leds: leds-pwm: Defer led_pwm_set() if PWM can sleep leds: lp55xx: fix the sysfs read operation leds: lm355x, lm3642: support camera LED triggers for flash and torch leds: add camera LED triggers leds: trigger: use inline functions instead of macros leds: tca6507: Use of_match_ptr() macro leds: wm8350: Complain if we fail to reenable DCDC leds: renesas: set gpio_request_one() flags param correctly leds: leds-ns2: set devm_gpio_request_one() flags param correctly leds: leds-lt3593: set devm_gpio_request_one() flags param correctly leds: leds-bd2802: remove erroneous __exit annotation leds: atmel-pwm: remove erroneous __exit annotation leds: move LED trigger drivers into new subdirectory leds: add new LP5562 LED driver
2013-05-06Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-05-06Merge tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "Nothing very exciting this time around. A couple of bug fixes and a lot of cleanup across the board. The DaVinci 8xx family of SoCs now use the same driver as the AM33xx family. Many thanks to Axel Lin and Jingoo Han who have done a great job fixing various bugs and inconsistencies." * tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (27 commits) pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable] pwm: Constify OF match tables pwm: pwm-tiehrpwm: Update device-tree binding document pwm: pwm-tiecap: Update device-tree binding document pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chip pwm: pxa: Remove PWM_ID_BASE macro pwm: spear: Remove unused *dev from struct spear_pwm_chip pwm: mxs: Remove unused *dev from struct mxs_pwm_chip pwm: twl: Return proper error if twl6030_pwm_enable() fails pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chip pwm: imx: Remove enabled field from struct imx_chip pwm: twl: Add .owner to struct pwm_ops pwm: twl-led: Add .owner to struct pwm_ops pwm: atmel-tcb: Add .owner to struct pwm_ops pwm: ab8500: Add .owner to struct pwm_ops pwm: spear: Fix checking return value of clk_enable() and clk_prepare() pwm: tiehrpwm: Staticize non-exported symbols pwm: tiecap: Staticize non-exported symbols pwm: ab8500: Fix trivial typo in dev_err message ...
2013-05-06Merge tag 'iommu-updates-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The updates are mostly about the x86 IOMMUs this time. Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a PPC platform) and an extension to the IOMMU group interface. On the x86 side this includes a workaround for VT-d to disable interrupt remapping on broken chipsets. On the AMD-Vi side the most important new feature is a kernel command-line interface to override broken information in IVRS ACPI tables and get interrupt remapping working this way. Besides that there are small fixes all over the place." * tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits) iommu/tegra: Fix printk formats for dma_addr_t iommu: Add a function to find an iommu group by id iommu/vt-d: Remove warning for HPET scope type iommu: Move swap_pci_ref function to drivers/iommu/pci.h. iommu/vt-d: Disable translation if already enabled iommu/amd: fix error return code in early_amd_iommu_init() iommu/AMD: Per-thread IOMMU Interrupt Handling iommu: Include linux/err.h iommu/amd: Workaround for ERBT1312 iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides iommu/amd: Add ioapic and hpet ivrs override iommu/amd: Add early maps for ioapic and hpet iommu/amd: Extend IVRS special device data structure iommu/amd: Move add_special_device() to __init iommu: Fix compile warnings with forward declarations iommu/amd: Properly initialize irq-table lock iommu/amd: Use AMD specific data structure for irq remapping iommu/amd: Remove map_sg_no_iommu() iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets ...
2013-05-06Merge branch 'exynos/pwm-clocksource' into late/multiplatformArnd Bergmann
This series from Tomasz Figa restores support for the pwm clocksource in Exynos, which was broken during the conversion of the platform to the common clk framework. The clocksource is only used in one board in the mainline kernel (universal_c210), and this makes it work for DT based probing as well as restoring the non-DT based case. * exynos/pwm-clocksource: ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver Conflicts: arch/arm/boot/dts/Makefile arch/arm/mach-exynos/common.c drivers/clocksource/Kconfig drivers/clocksource/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-06Merge branch 'late/clksrc' into late/cleanupArnd Bergmann
There is no reason to keep the clksrc cleanups separate from the other cleanups, and this resolves some merge conflicts. Conflicts: arch/arm/mach-spear/spear13xx.c drivers/irqchip/Makefile
2013-05-06Merge branch 'late/dt' into next/dt2Arnd Bergmann
This is support for the ARM Chromebook, originally scheduled as a "late" pull request. Since it's already late now, we can combine this into the existing next/dt2 branch. * late/dt: ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph changes from Alex Elder: "This is a big pull. Most of it is culmination of Alex's work to implement RBD image layering, which is now complete (yay!). There is also some work from Yan to fix i_mutex behavior surrounding writes in cephfs, a sync write fix, a fix for RBD images that get resized while they are mapped, and a few patches from me that resolve annoying auth warnings and fix several bugs in the ceph auth code." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (254 commits) rbd: fix image request leak on parent read libceph: use slab cache for osd client requests libceph: allocate ceph message data with a slab allocator libceph: allocate ceph messages with a slab allocator rbd: allocate image object names with a slab allocator rbd: allocate object requests with a slab allocator rbd: allocate name separate from obj_request rbd: allocate image requests with a slab allocator rbd: use binary search for snapshot lookup rbd: clear EXISTS flag if mapped snapshot disappears rbd: kill off the snapshot list rbd: define rbd_snap_size() and rbd_snap_features() rbd: use snap_id not index to look up snap info rbd: look up snapshot name in names buffer rbd: drop obj_request->version rbd: drop rbd_obj_method_sync() version parameter rbd: more version parameter removal rbd: get rid of some version parameters rbd: stop tracking header object version rbd: snap names are pointer to constant data ...
2013-05-06btrfs: document mount options in Documentation/fs/btrfs.txtEric Sandeen
Document all current btrfs mount options. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "This is the second batch of s390 patches for the 3.10 merge window. Heiko improved the memory detection, this fixes kdump for large memory sizes. Some kvm related memory management work, new ipldev/condev keywords in cio and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mem_detect: remove artificial kdump memory types s390/mm: add pte invalidation notifier for kvm s390/zcrypt: ap bus rescan problem when toggle crypto adapters on/off s390/memory hotplug,sclp: get rid of per memory increment usecount s390/memory hotplug: provide memory_block_size_bytes() function s390/mem_detect: limit memory detection loop to "mem=" parameter s390/kdump,bootmem: fix bootmem allocator bitmap size s390: get rid of odd global real_memory_size s390/kvm: Change the virtual memory mapping location for Virtio devices s390/zcore: calculate real memory size using own get_mem_size function s390/mem_detect: add DAT sanity check s390/mem_detect: fix lockdep irq tracing s390/mem_detect: move memory detection code to mm folder s390/zfcpdump: exploit new cio_ignore keywords s390/cio: add condev keyword to cio_ignore s390/cio: add ipldev keyword to cio_ignore s390/uaccess: add "fallthrough" comments
2013-05-05Merge tag 'mfd-3.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD update from Samuel Ortiz: "For 3.10 we have a few new MFD drivers for: - The ChromeOS embedded controller which provides keyboard, battery and power management services. This controller is accessible through i2c or SPI. - Silicon Laboratories 476x controller, providing access to their FM chipset and their audio codec. - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader. - Nokia's Tahvo power button and watchdog device. This device is very similar to Retu and is thus supported by the same code base. - STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by the stmpe driver. - ST-Ericsson AB8540 and AB8505 power management and voltage converter controllers through the existing ab8500 code. Some other drivers got cleaned up or improved. In particular: - The Linaro/STE guys got the ab8500 driver in sync with their internal code through a series of optimizations, fixes and improvements. - The AS3711 and OMAP USB drivers now have DT support. - The arizona clock and interrupt handling code got improved. - The wm5102 register patch and boot mechanism also got improved." * tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits) mfd: si476x: Don't use 0bNNN mfd: vexpress: Handle pending config transactions mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly mfd: si476x: Fix i2c warning mfd: si476x: Add header files and Kbuild plumbing mfd: si476x: Add chip properties handling code mfd: si476x: Add the bulk of the core driver mfd: si476x: Add commands abstraction layer mfd: rtsx: Support RTS5249 mfd: retu: Add Tahvo support mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus mfd: wm8994: Add some OF properties mfd: wm8994: Add device ID data to WM8994 OF device IDs input: Export matrix_keypad_parse_of_params() mfd: tps65090: Add compatible string for charger subnode mfd: db8500-prcmu: Support platform dependant device selection mfd: syscon: Fix warnings when printing resource_size_t of: Add stub of_get_parent for non-OF builds mfd: omap-usb-tll: Convert to devm_ioremap_resource() mfd: omap-usb-host: Convert to devm_ioremap_resource() ...
2013-05-05Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
2013-05-05Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...