aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-15uprobes/x86: Do not (ab)use TIF_SINGLESTEP/user_*_single_step() for ↵Oleg Nesterov
single-stepping user_enable/disable_single_step() was designed for ptrace, it assumes a single user and does unnecessary and wrong things for uprobes. For example: - arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an application itself can set X86_EFLAGS_TF which must be preserved after arch_uprobe_disable_step(). - we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in arch_uprobe_enable_step(), this only makes sense for ptrace. - otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step() doesn't do user_disable_single_step(), the application will be killed after the next syscall. - arch_uprobe_enable_step() does access_process_vm() we do not need/want. Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF directly, this is much simpler and more correct. However, we need to clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn, add set_task_blockstep(false). Note: with or without this patch, there is another (hopefully minor) problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by uprobes. Perhaps we should change _disable to update the stack, or teach arch_uprobe_skip_sstep() to emulate this insn. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15ptrace/x86: Partly fix set_task_blockstep()->update_debugctlmsr() logicOleg Nesterov
Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in step.c was always very wrong. 1. update_debugctlmsr() was simply unneeded. The child sleeps TASK_TRACED, __switch_to_xtra(next_p => child) should notice TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if needed. 2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register should always match the state of current's TIF_BLOCKSTEP bit. 3. Even get_debugctlmsr() + update_debugctlmsr() itself does not look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR register or the caller can be preempted in between. 4. It is not safe to play with TIF_BLOCKSTEP if task != current. DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each other if the task is running. The tracee is stopped but it can be SIGKILL'ed right before set/clear_tsk_thread_flag(). However, now that uprobes uses user_enable_single_step(current) we can't simply remove update_debugctlmsr(). So this patch adds the additional "task == current" check and disables irqs to avoid the race with interrupts/preemption. Unfortunately this patch doesn't solve the last problem, we need another fix. Probably we should teach ptrace_stop() to set/clear single/block stepping after resume. And afaics there is yet another problem: perf can play with MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even __switch_to_xtra() has problems. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2012-09-15ptrace/x86: Introduce set_task_blockstep() helperOleg Nesterov
No functional changes, preparation for the next fix and for uprobes single-step fixes. Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the new helper, set_task_blockstep(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes/x86: Implement x86 specific arch_uprobe_*_stepSebastian Andrzej Siewior
The arch specific implementation behaves like user_enable_single_step() except that it does not disable single stepping if it was already enabled by ptrace. This allows the debugger to single step over an uprobe. The state of block stepping is not restored. It makes only sense together with TF and if that was enabled then the debugger is notified. Note: this is still not correct. For example, TIF_SINGLESTEP check is not right, the application itself can set X86_EFLAGS_TF. And otoh we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf". See the next patches, we need the changes in arch/x86/kernel/step.c first. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes: Introduce arch_uprobe_enable/disable_step()Sebastian Andrzej Siewior
As Oleg pointed out in [0] uprobe should not use the ptrace interface for enabling/disabling single stepping. [0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com Add the new "__weak arch" helpers which simply call user_*_single_step() as a preparation. This is only needed to not break the powerpc port, we will fold this logic into arch_uprobe_pre/post_xol() hooks later. We should also change handle_singlestep(), _disable_step(&uprobe->arch) should be called before put_uprobe(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes: Teach find_active_uprobe() to clear MMF_HAS_UPROBESOleg Nesterov
The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers the "slow" and unnecessary handle_swbp() path if the task hits the non-uprobe breakpoint. So this patch changes find_active_uprobe() to check every valid vma and clear MMF_HAS_UPROBES if no uprobes were found. This is adds the slow O(n) path, but it is only called in unlikely case when the task hits the normal breakpoint first time after uprobe_unregister(). Note the "not strictly accurate" comment in mmf_recalc_uprobes(). We can fix this, we only need to teach vma_has_uprobes() to return a bit more more info, but I am not sure this worth the trouble. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes: Introduce MMF_RECALC_UPROBESOleg Nesterov
Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES can be false positive after remove_breakpoint() or uprobe_munmap(). It is also set by uprobe_dup_mmap(), this is not optimal but simple. We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES only if the new mm actually has uprobes, but I don't think this makes sense. The next patch will use this flag to clear MMF_HAS_UPROBES. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes: uprobes_treelock should not disable irqsOleg Nesterov
Nobody plays with uprobes_tree/uprobes_treelock in interrupt context, no need to disable irqs. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-15uprobes: Don't put NULL pointer in uprobe_register()Sebastian Andrzej Siewior
alloc_uprobe() might return a NULL pointer, put_uprobe() can't deal with this. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-14perf hists browser: Fix first column printingNamhyung Kim
As a side effect of commit f5951d56a2ab ("perf hists browser: Use perf_hpp__format functions") perf report TUI got a problem of not refreshing the first character. Since the previous patch restores the column width of "overhead" to 7 we can start at column 0 now. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347431706-7839-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14perf hists browser: Fix output for 100.00%Namhyung Kim
Current hpp format functions assume that the output will fit to 6 character including % sign (XX.YY%) so used "%5.2f%%" as a format string. However it might be the case if collapsing resulted in a single entry which has 100.00% (7 character) of period. In this case the output will be shifted by 1 character. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347431706-7839-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14tools lib traceevent: Define _GNU_SOURCE in MakefileArnaldo Carvalho de Melo
For the reasons stated on: commit 0a84f00 Author: David Daney <david.daney@cavium.com> perf tools: Fix broken build by defining _GNU_SOURCE in Makefile Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: David Daney <david.daney@cavium.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-e2nofbmj4uf0ykgsytxvt9pu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14perf sched: Fixup for the die() removalNamhyung Kim
The commit a116e05dcf61 ("perf sched: Remove die() calls") replaced die() call to pr_debug + return -1, but it should be pr_err otherwise it'll not show up unless -v option is given. Fix it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347415866-303-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14perf test: Fixup for the die() removalNamhyung Kim
The commit 32c7f7383a09 ("perf test: Remove die() calls") replaced die() call to pr_debug + return -1, but it should be pr_err otherwise it'll not show up unless -v option is given. Fix it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347415866-303-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14perf probe: Add union member access supportHyeoncheol Lee
Union members can be accessed with '.' or '->' like data structure member access Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/CANFS6baeuSBxPGQ8SUZWZErJ2bWs-Nojg+FSo138E1QK8bJJig@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-14Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core Pull tracing updates from Steve Rostedt. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-13kprobes/x86: Fix to support jprobes on ftrace-based kprobeMasami Hiramatsu
Fix kprobes/x86 to support jprobes on ftrace-based kprobes. Because of -mfentry support of ftrace, ftrace is now put on the beginning of function where jprobes are put. Originally ftrace-based kprobes doesn't support jprobe because it will change regs->ip and ftrace doesn't support changing IP and ftrace itself doesn't conflict jprobe. However, ftrace -mfentry support moves mcount call on the top of functions where jprobes are put. This means that jprobe always conflicts with ftrace-based kprobe and fails. This patch allows ftrace-based kprobes to support jprobes by allowing to modify regs->ip and kprobes breakpoint handler also allows to skip singlestepping because there is a ftrace call (not an original instruction). Link: http://lkml.kernel.org/r/20120905143125.10329.90836.stgit@localhost.localdomain Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13ftrace/x86-64: Allow to change RIP in handlersSteven Rostedt
Allow ftrace handlers to change RIP register (regs->ip) in handlers. This will allow handlers to call another function instead of original function. Link: http://lkml.kernel.org/r/20120905143118.10329.5078.stgit@localhost.localdomain Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13kprobes/x86: Fix kprobes to collectly handle IP on ftraceMasami Hiramatsu
Current kprobe_ftrace_handler expects regs->ip == ip, but it is incorrect (originally on x86-64). Actually, ftrace handler sets regs->ip = ip + MCOUNT_INSN_SIZE. kprobe_ftrace_handler must take care for that. Link: http://lkml.kernel.org/r/20120905143112.10329.72069.stgit@localhost.localdomain Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13ftrace/x86: Adjust x86 regs.ip as like as x86-64Masami Hiramatsu
Adjust x86 regs.ip to ip + MCOUNT_INSN_SIZE as like as on x86-64. This helps us to consolidate codes which use regs->ip on both of x86/x86-64. Link: http://lkml.kernel.org/r/20120905143100.10329.60109.stgit@localhost.localdomain Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13trace: Stop compiling in trace_clock unconditionallyJosh Triplett
Commit 56449f437 "tracing: make the trace clocks available generally", in April 2009, made trace_clock available unconditionally, since CONFIG_X86_DS used it too. Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code", in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split out from CONFIG_TRACING for general use) has a dependency on trace_clock. So, only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING enabled. Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13tracing: Skip printing "OK" if failed to disable eventYuanhan Liu
No acutal case found. But logically, we should skip "OK" in case any error met. Link: http://lkml.kernel.org/r/1346051625-25231-1-git-send-email-yuanhan.liu@linux.intel.com Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-13Merge branch 'core/rcu' into perf/coreIngo Molnar
Steve Rostedt asked for the merge of a single commit, into both the RCU and the perf/tracing tree: | Josh made a change to the tracing code that affects both the | work Paul McKenney and I are currently doing. At the last | Kernel Summit back in August, Linus said when such a case | exists, it is best to make a separate branch based off of his | tree and place the change there. This way, the repositories | that need to share the change can both pull them in and the | SHA1 will match for both. Whichever branch is pulled in first | by Linus will also pull in the necessary change for the other | branch as well. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-13Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Remove die()/exit() calls from several tools. * Add missing perf_regs.h file to MANIFEST * Clean up and improve 'perf sched' performance by elliminating lots of needless calls to libtraceevent. * More patches to make perf build on Android, from Irina Tirdea * Resolve vdso callchains, from Jiri Olsa Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-12trace: Don't declare trace_*_rcuidle functions in modulesJosh Triplett
Tracepoints declare a static inline trace_*_rcuidle variant of the trace function, to support safely generating trace events from the idle loop. Module code never actually uses that variant of trace functions, because modules don't run code that needs tracing with RCU idled. However, the declaration of those otherwise unused functions causes the module to reference rcu_idle_exit and rcu_idle_enter, which RCU does not export to modules. To avoid this, don't generate trace_*_rcuidle functions for tracepoints declared in module code. Link: http://lkml.kernel.org/r/20120905062306.GA14756@leaf Reported-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-11perf sched: Don't read all tracepoint variables in advanceArnaldo Carvalho de Melo
Do it just at the actual consumer of these fields, that way we avoid needless lookups: [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% ) 11 context-switches # 0.112 K/sec ( +- 2.83% ) 0 cpu-migrations # 0.003 K/sec ( +- 50.92% ) 7,604 page-faults # 0.077 M/sec ( +- 0.00% ) 332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%] 100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%] 58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%] 609,402,433 instructions # 1.83 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%] 131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%] 1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%] 0.099580430 seconds time elapsed ( +- 0.48% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf sched: Use perf_evsel__{int,str}valArnaldo Carvalho de Melo
This patch also stops reading the common fields, as they were not being used except for one ->common_pid case that was replaced by sample->tid, i.e. the info is already in the perf_sample struct. Also it only fills the _event structures when there is a handler. [root@sandy ~]# perf sched record sleep 30s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ] Before: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% ) 14 context-switches # 0.111 K/sec ( +- 2.10% ) 0 cpu-migrations # 0.002 K/sec ( +- 66.67% ) 7,654 page-faults # 0.059 M/sec ( +- 0.67% ) 438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%] 150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%] 80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%] 758,605,879 instructions # 1.73 insns per cycle # 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%] 162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%] 1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%] 0.129949153 seconds time elapsed ( +- 0.28% ) After: [root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null Performance counter stats for 'perf sched lat' (10 runs): 103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% ) 12 context-switches # 0.114 K/sec ( +- 3.29% ) 0 cpu-migrations # 0.000 K/sec 7,605 page-faults # 0.073 M/sec ( +- 0.00% ) 345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%] 106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%] 62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%] 628,246,586 instructions # 1.82 insns per cycle # 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%] 134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%] 1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%] 0.104333272 seconds time elapsed ( +- 0.33% ) [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf evsel: Introduce perf_evsel__{str,int}val methodsArnaldo Carvalho de Melo
Wrappers to the libtraceevent routines, so that we can further reduce the surface contact perf builtins have with it. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-rtmgzptvrifzjxqwb9vs6g1b@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf sched: Use perf_tool as ancestorArnaldo Carvalho de Melo
So that we can remove all the globals. Before: text data bss dec hex filename 1586833 110368 1438600 3135801 2fd939 /tmp/oldperf After: text data bss dec hex filename 1629329 93568 848328 2571225 273bd9 /root/bin/perf Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-oph40vikij0crjz4eyapneov@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf sched: Remove unused thread parameterArnaldo Carvalho de Melo
From the tracepoint handling routines. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-mcqd9mv34z6he0wqiz4a3mh9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Use __maybe_used for unused variablesIrina Tirdea
perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Back [vdso] DSO with real dataJiri Olsa
Storing data for VDSO shared object, because we need it for the post unwind processing. The VDSO shared object is same for all process on a running system, so it makes no difference when we store it inside the tracer - perf. When [vdso] map memory is hit, we retrieve [vdso] DSO image and store it into temporary file. During the build-id processing phase, the [vdso] DSO image is stored in build-id db, and build-id reference is made inside perf.data. The build-id vdso file object is called '[vdso]'. We don't use temporary file name which gets removed when record is finished. During report phase the vdso build-id object is treated as any other build-id DSO object. Adding following API for vdso object: bool is_vdso_map(const char *filename) - returns true if the filename matches vdso map name struct dso *vdso__dso_findnew(struct list_head *head) - find/create proper vdso DSO object vdso__exit(void) - removes temporary VDSO image if there's any This change makes backtrace dwarf post unwind possible from [vdso] maps. Following output is current report of [vdso] sample dwarf backtrace: # Overhead Command Shared Object Symbol # ........ ....... ................. ............................. # 99.52% ex [vdso] [.] 0x00007fff3ace89af | --- 0x7fff3ace89af Following output is new report of [vdso] sample dwarf backtrace: # Overhead Command Shared Object Symbol # ........ ....... ................. ............................. # 99.52% ex [vdso] [.] 0x00000000000009af | --- 0x7fff3ace89af main __libc_start_main _start Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-5-git-send-email-jolsa@redhat.com [ committer note: s/ALIGN/PERF_ALIGN/g to cope with the android build changes ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf symbols: Make dsos__find function globally availableJiri Olsa
Changing dsos__find function from static to be globally available. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-4-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Add memdup functionJiri Olsa
Adding memdup function to duplicate region of memory. void *memdup(const void *src, size_t len) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Do backtrace post unwind only if we regs and stack were capturedJiri Olsa
Bail out without error if we want to do backtrace post unwind, but were not able to capture user registers or user stack during the record phase, which is possible and valid case. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1347295819-23177-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: fix ALIGN redefinition in system headersIrina Tirdea
On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: include __WORDSIZE definitionIrina Tirdea
__WORDSIZE is GLibC-specific and is not defined on all systems or glibc versions (e.g. Android's bionic does not define it). In file included from util/include/linux/bitmap.h:5:0, from util/header.h:10, from util/session.h:6, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/bitops.h: In function 'set_bit': util/include/linux/bitops.h:25:12: error: '__WORDSIZE' undeclared (first use in this function) util/include/linux/bitops.h:25:12: note: each undeclared identifier is reported only once for each function it appears in util/include/linux/bitops.h:23:51: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter] util/include/linux/bitops.h: In function 'clear_bit': util/include/linux/bitops.h:30:12: error: '__WORDSIZE' undeclared (first use in this function) util/include/linux/bitops.h:28:53: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter] In file included from util/header.h:10:0, from util/session.h:6, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/bitmap.h: In function 'bitmap_zero': util/include/linux/bitmap.h:22:6: error: '__WORDSIZE' undeclared (first use in this function) Defining __WORDSIZE in perf's headers if it is not already defined. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Suggested-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-4-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Update types definitions for AndroidIrina Tirdea
Some type definitions are missing from Android or are already defined in bionic and lead to redefinition errors. Android defines in types.h __le32. Since perf is wrapping <linux/types.h> with a local version, we need to define this constant in the local version too. Error in Android: In file included from bionic/libc/include/unistd.h:36:0, from external/perf/tools/perf/util/util.h:46, from external/perf/tools/perf/util/cache.h:5, from external/perf/tools/perf/util/abspath.c:1: bionic/libc/kernel/common/linux/capability.h:60:2: error: unknown type name '__le32' roundup() definition is missing: util/symbol.c: In function 'symbols__fixup_end': util/symbol.c:106: warning: implicit declaration of function 'roundup' util/symbol.c:106: warning: nested extern declaration of 'roundup' __force macro defined in perf is also defined in libc which leads to redefinition errors. In order to avoid these, we guard these definition with Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-3-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: Add missing perf_regs.h file to MANIFESTArnaldo Carvalho de Melo
The 2bcd355 broke the perf-tar*-src-pkg generated tarballs builds, fix it. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2ndz2o636rn4q175fwn18x32@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11perf tools: include wrapper for magic.hIrina Tirdea
perf is currently including magic.h directly from the kernel. If the glibc magic.h is also included, this leads to warnings that the constants are redefined. This happens on some systems (e.g. Android). Redefinition errors on Android: In file included from util/util.h:79:0, from util/cache.h:5, from util/abspath.c:1: util/../../../include/linux/magic.h:5:0: error: "AFFS_SUPER_MAGIC" redefined [-Werror] bionic/libc/include/sys/vfs.h:53:0: note: this is the location of the previous definition util/../../../include/linux/magic.h:19:0: error: "EFS_SUPER_MAGIC" redefined [-Werror] bionic/libc/include/sys/vfs.h:61:0: note: this is the location of the previous definition util/../../../include/linux/magic.h:26:0: error: "HPFS_SUPER_MAGIC" redefined [-Werror] bionic/libc/include/sys/vfs.h:67:0: note: this is the location of the previous definition Only two constants from magic.h are used by perf (DEBUGFS_MAGIC and SYSFS_MAGIC). This fix provides a wrapper for magic.h that includes only these constants instead of including the kernel header file directly. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-2-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-09perf kmem: Remove die() callsArnaldo Carvalho de Melo
Just use pr_err() + return -1 and perf_session__process_events to abort when some event would call die(), then let the perf's main() exit doing whatever it needs. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-i7rhuqfwshjiwc9gr9m1vov4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-09perf sched: Remove die() callsArnaldo Carvalho de Melo
Just use pr_err() + return -1 and perf_session__process_events to abort when some event would call die(), then let the perf's main() exit doing whatever it needs. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-88cwdogxqomsy9tfr8r0as58@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-09perf test: Remove die() callsArnaldo Carvalho de Melo
Just use pr_err() + return -1 and let the other tests run as well and then the perf's main() exit doing whatever it needs. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-n5ahw26e94klmde9cz6rxsdf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-09Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Don't pass const char pointers to basename, so that we can unconditionally use libgen.h and thus avoid ifdef BIONIC lines, from David Ahern * Fix assert/BUG_ON when NDEBUG is defined, from Irina Tirdea. * Refactor hist formatting so that it can be reused with the GTK browser, From Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-08Linux 3.6-rc5v3.6-rc5Linus Torvalds
2012-09-08Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "Another set of fixes for ARM dma-mapping subsystem. Commit e9da6e9905e6 replaced custom consistent buffer remapping code with generic vmalloc areas. It however introduced some regressions caused by limited support for allocations in atomic context. This series contains fixes for those regressions. For some subplatforms the default, pre-allocated pool for atomic allocations turned out to be too small, so a function for setting its size has been added. Another set of patches adds support for atomic allocations to IOMMU-aware DMA-mapping implementation. The last part of this pull request contains two fixes for Contiguous Memory Allocator, which relax too strict requirements." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: atomic_pool with struct page **pages ARM: Kirkwood: increase atomic coherent pool size ARM: DMA-Mapping: print warning when atomic coherent allocation fails ARM: DMA-Mapping: add function for setting coherent pool size from platform code ARM: relax conditions required for enabling Contiguous Memory Allocator mm: cma: fix alignment requirements for contiguous regions
2012-09-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add support for EMR on Cintiq 24HD touch Input: i8042 - add Gigabyte T1005 series netbooks to noloop table Input: imx_keypad - reset the hardware before enabling Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS
2012-09-08perf symbols: Remove BIONIC wrapper around libgen.hDavid Ahern
Now that the 2 offenders are fixed, the BIONIC conditional around libgen.h can be removed. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1347116812-93646-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf probe: Make a copy of exec path for passing to basenameDavid Ahern
The basename function may modify the string passed to it, so the string should not be marked const. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1347116812-93646-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-08perf annotate: Make a copy of filename for passing to basenameDavid Ahern
The basename function may modify the string passed to it, so the string should not be marked const. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Irina Tirdea <irina.tirdea@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1347116812-93646-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>