aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-27Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-08-25Merge tag 'fixes-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for various ARM platforms. About half of these are for OMAP and submitted before but did not make it into v3.6-rc2." * tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path ARM: Kirkwood: fix Makefile.boot ARM: Kirkwood: Fix iconnect leds ARM: Orion: Set eth packet size csum offload limit ARM: mv78xx0: fix win_cfg_base prototype ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() ARM: mmp: fix potential NULL dereference ARM: OMAP4: Register the OPP table only for 4430 device cpufreq: OMAP: Handle missing frequency table on SMP systems ARM: OMAP4: sleep: Save the complete used register stack frame ...
2012-08-25Merge tag 'stable/for-linus-3.6-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull three xen bug-fixes from Konrad Rzeszutek Wilk: - Revert the kexec fix which caused on non-kexec shutdowns a race. - Reuse existing P2M leafs - instead of requiring to allocate a large area of bootup virtual address estate. - Fix a one-off error when adding PFNs for balloon pages. * tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M. xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID. Revert "xen PVonHVM: move shared_info to MMIO before kexec"
2012-08-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "I meant to sent that earlier but got swamped with other things, so here are some powerpc fixes for 3.6. A few regression fixes and some bug fixes that I deemed should still make it. There's a FSL update from Kumar with a bunch of defconfig updates along with a few embedded fixes. I also reverted my g5_defconfig update that I merged earlier as it was completely busted, not too sure what happened there, I'll do a new one later." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Revert "powerpc: Update g5_defconfig" powerpc/perf: Use pmc_overflow() to detect rolled back events powerpc: Fix VMX in interrupt check in POWER7 copy loops powerpc: POWER7 copy_to_user/copy_from_user patch applied twice powerpc: Fix personality handling in ppc64_personality() powerpc/dma-iommu: Fix IOMMU window check powerpc: Remove unnecessary ifdefs powerpc/kgdb: Restore current_thread_info properly powerpc/kgdb: Bail out of KGDB when we've been triggered powerpc/kgdb: Do not set kgdb_single_step on ppc powerpc/mpic_msgr: Add missing includes powerpc: Fix null pointer deref in perf hardware breakpoints powerpc: Fixup whitespace in xmon powerpc: Fix xmon dl command for new printk implementation powerpc/fsl: fix "Failed to mount /dev: No such device" errors powerpc/fsl: update defconfigs booke/wdt: some ioctls do not return values properly powerpc/p4080ds: dts - add usb controller version info and port0 powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS powerpc/fsl-pci: Only scan PCI bus if configured as a host
2012-08-25Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86 emulator: use stack size attribute to mask rsp in stack ops KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended ppc: e500_tlb memset clears nothing KVM: PPC: Add cache flush on page map KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value
2012-08-25Merge tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs bugfixes from Ben Myers: - fix uninitialised variable in xfs_rtbuf_get() - unlock the AGI buffer when looping in xfs_dialloc - check for possible overflow in xfs_ioc_trim * tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs: xfs: check for possible overflow in xfs_ioc_trim xfs: unlock the AGI buffer when looping in xfs_dialloc xfs: fix uninitialised variable in xfs_rtbuf_get()
2012-08-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Random fixes across the MIPS tree. The two hotspots are several bugs in the module loader and the ath79 SOC support; also noteworthy is the restructuring of the code to synchronize CPU timers across CPUs on startup; the old code recently ceased to work due to unrelated changes. All except one of these patches have sat for a significant time in linux-next for testing." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module MIPS: Malta: Delete duplicate PCI fixup. MIPS: ath79: don't hardcode the unavailability of the DSP ASE MIPS: Synchronize MIPS count one CPU at a time MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. MIPS: Fix race condition in module relocation code. MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. MIPS: MTX-1: Add udelay to mtx1_pci_idsel MIPS: ath79: select HAVE_CLK MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 MIPS: ath79: Fix number of GPIO lines for AR724[12] MIPS: Octeon: Fix broken interrupt controller code.
2012-08-25Merge branch 'for-3.6' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from J. Bruce Fields: "Particular thanks to Michael Tokarev, Malahal Naineni, and Jamie Heilman for their testing and debugging help." * 'for-3.6' of git://linux-nfs.org/~bfields/linux: svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping svcrpc: sends on closed socket should stop immediately svcrpc: fix BUG() in svc_tcp_clear_pages nfsd4: fix security flavor of NFSv4.0 callback
2012-08-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block-related fixes from Jens Axboe: - Improvements to the buffered and direct write IO plugging from Fengguang. - Abstract out the mapping of a bio in a request, and use that to provide a blk_bio_map_sg() helper. Useful for mapping just a bio instead of a full request. - Regression fix from Hugh, fixing up a patch that went into the previous release cycle (and marked stable, too) attempting to prevent a loop in __getblk_slow(). - Updates to discard requests, fixing up the sizing and how we align them. Also a change to disallow merging of discard requests, since that doesn't really work properly yet. - A few drbd fixes. - Documentation updates. * 'for-linus' of git://git.kernel.dk/linux-block: block: replace __getblk_slow misfix by grow_dev_page fix drbd: Write all pages of the bitmap after an online resize drbd: Finish requests that completed while IO was frozen drbd: fix drbd wire compatibility for empty flushes Documentation: update tunable options in block/cfq-iosched.txt Documentation: update tunable options in block/cfq-iosched.txt Documentation: update missing index files in block/00-INDEX block: move down direct IO plugging block: remove plugging at buffered write time block: disable discard request merge temporarily bio: Fix potential memory leak in bio_find_or_create_slab() block: Don't use static to define "void *p" in show_partition_start() block: Add blk_bio_map_sg() helper block: Introduce __blk_segment_map_sg() helper fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices block: split discard into aligned requests block: reorganize rounding of max_discard_sectors
2012-08-25Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: - libata-acpi regression fix - additional or corrected drive quirks for ata_blacklist - Kconfig text tweaking - new PCI IDs - pata_atiixp: quirk for MSI motherboard - export ahci_dev_classify for an ahci_platform driver * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry [libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro [libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff [libata] acpi: call ata_acpi_gtm during ata port init time ata_piix: Add Device IDs for Intel Lynx Point-LP PCH ahci: Add Device IDs for Intel Lynx Point-LP PCH pata_atiixp: override cable detection on MSI E350DM-E33 ahci: un-staticize ahci_dev_classify
2012-08-25libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entryPrarit Bhargava
commit d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-24Revert "powerpc: Update g5_defconfig"Benjamin Herrenschmidt
This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/perf: Use pmc_overflow() to detect rolled back eventsSukadev Bhattiprolu
For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard <anton@samba.org> Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include <stdio.h> #include <string.h> main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix VMX in interrupt check in POWER7 copy loopsAnton Blanchard
The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: POWER7 copy_to_user/copy_from_user patch applied twiceAnton Blanchard
"powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix personality handling in ppc64_personality()Jiri Kosina
Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/dma-iommu: Fix IOMMU window checkAaro Koskinen
Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Remove unnecessary ifdefsMichael Neuling
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Restore current_thread_info properlyTiejun Chen
For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Bail out of KGDB when we've been triggeredTiejun Chen
We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Do not set kgdb_single_step on ppcTiejun Chen
The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/mpic_msgr: Add missing includesScott Wood
Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Meador Inge <meador_inge@mentor.com> Cc: Jia Hongtao <B38951@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix null pointer deref in perf hardware breakpointsMichael Neuling
Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fixup whitespace in xmonMichael Ellerman
There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix xmon dl command for new printk implementationMichael Ellerman
Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This push fixes a build error on 32-bit archs in the hifn driver as well as a potential deadlock in the caam driver." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix possible deadlock condition crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs
2012-08-23Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF, ext3 & reiserfs fixes from Jan Kara: "A couple of fixes (udf, reiserfs, ext3) that accumulated over my vacation." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: fix retun value on error path in udf_load_logicalvol jbd: don't write superblock when unmounting an ro filesystem reiserfs: fix deadlocks with quotas quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space(). UDF: During mount free lvid_bh before rescanning with different blocksize udf: fix udf_setsize() for file data in ICB
2012-08-23Merge tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBIFS fixes from Artem Bityutskiy: - Fix crash on error which prevents emulated power-cut testing. - Fix log reply regression introduced in 3.6-rc1. - Fix UBIFS complaints about too small debug buffer size which. - Fix error message spelling, and remove incorrect commentary. * tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs: UBIFS: fix error messages spelling UBIFS: fix complaints about too small debug buffer size UBIFS: fix replay regression UBIFS: fix crash on error path UBIFS: remove stale commentary
2012-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE power management bugfix from David S. Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: fix generic_ide_suspend/resume Oops
2012-08-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This tree contains misc fixlets: a perf script python binding fix, a uprobes fix and a syscall tracing fix." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Add missing files to build the python binding uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1
2012-08-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This tree contains assorted fixlets: an alternatives patching crash fix, an irq migration/hotplug interaction fix, a fix for large AMD microcode images and a comment fixlet." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Fix broken ucode patch size check x86/alternatives: Fix p6 nops on non-modular kernels x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask x86/spinlocks: Fix comment in spinlock.h
2012-08-23Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Mostly small fixes for the fallout of the timekeeping overhaul in 3.6 along with stable fixes to address an accumulation problem and missing sanity checks for RTC readouts and user space provided values." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Avoid making adjustments if we haven't accumulated anything time: Avoid potential shift overflow with large shift values time: Fix casting issue in timekeeping_forward_now time: Ensure we normalize the timekeeper in tk_xtime_add time: Improve sanity checking of timekeeping inputs
2012-08-23Merge branch 'upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: "Fix for one particular device not being properly claimed by hid-multitouch driver" * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Remove QUANTA from special drivers list
2012-08-23xfs: check for possible overflow in xfs_ioc_trimTomas Racek
If range.start or range.minlen is bigger than filesystem size, return invalid value error. This fixes possible overflow in BTOBB macro when passed value was nearly ULLONG_MAX. Signed-off-by: Tomas Racek <tracek@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-08-23xfs: unlock the AGI buffer when looping in xfs_diallocChristoph Hellwig
Also update some commens in the area to make the code easier to read. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-08-23xfs: fix uninitialised variable in xfs_rtbuf_get()Dave Chinner
Results in this assert failure in generic/090: XFS: Assertion failed: *nmap >= 1, file: fs/xfs/xfs_bmap.c, line: 4363 ..... Call Trace: [<ffffffff814680db>] xfs_bmapi_read+0x6b/0x370 [<ffffffff814b64b2>] xfs_rtbuf_get+0x42/0x130 [<ffffffff814b6f09>] xfs_rtget_summary+0x89/0x120 [<ffffffff814b7bfe>] xfs_rtallocate_extent_size+0xce/0x340 [<ffffffff814b89f0>] xfs_rtallocate_extent+0x240/0x290 [<ffffffff81462c1a>] xfs_bmap_rtalloc+0x1ba/0x340 [<ffffffff81463a65>] xfs_bmap_alloc+0x35/0x40 [<ffffffff8146f111>] xfs_bmapi_allocate+0xf1/0x350 [<ffffffff8146f9de>] xfs_bmapi_write+0x66e/0xa60 [<ffffffff8144538a>] xfs_iomap_write_direct+0x22a/0x3f0 [<ffffffff8143707b>] __xfs_get_blocks+0x38b/0x5d0 [<ffffffff814372d4>] xfs_get_blocks_direct+0x14/0x20 [<ffffffff811b0081>] do_blockdev_direct_IO+0xf71/0x1eb0 [<ffffffff811b1015>] __blockdev_direct_IO+0x55/0x60 [<ffffffff814355ca>] xfs_vm_direct_IO+0x11a/0x1e0 [<ffffffff8112d617>] generic_file_direct_write+0xd7/0x1b0 [<ffffffff8143e16c>] xfs_file_dio_aio_write+0x13c/0x320 [<ffffffff8143e6f2>] xfs_file_aio_write+0x1c2/0x1d0 [<ffffffff81174a07>] do_sync_write+0xa7/0xe0 [<ffffffff81175288>] vfs_write+0xa8/0x160 [<ffffffff81175702>] sys_pwrite64+0x92/0xb0 [<ffffffff81b68f69>] system_call_fastpath+0x16/0x1b Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-08-23powerpc/fsl: fix "Failed to mount /dev: No such device" errorsKim Phillips
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23powerpc/fsl: update defconfigsKim Phillips
run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23Merge branch 'randconfig/mach' into fixesArnd Bergmann
Small platform specific bug fixes for problems found in randconfig builds. * randconfig/mach: ARM: ux500: don't select LEDS_GPIO for snowball ARM: imx: build i.MX6 functions only when needed ARM: imx: select CPU_FREQ_TABLE when needed ARM: imx: fix ksz9021rn_phy_fixup ARM: imx: build pm-imx5 code only when PM is enabled ARM: omap: allow building omap44xx without SMP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23ARM: ux500: don't select LEDS_GPIO for snowballArnd Bergmann
Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>
2012-08-23ARM: imx: build i.MX6 functions only when neededArnd Bergmann
The head-v7.S contains a call to the generic cpu_suspend function, which is only available when selected by the i.MX6 code. As pointed out by Shawn Guo, i.MX5 does not actually use any functions defined in head-v7.S. It is also needed only for the i.MX6 power management code and for the SMP code, so we can restrict building this file to situations in which at least one of those two is present. Finally, other platforms with a similar file call it headsmp.S, so we can rename it to the same for consistency. Without this patch, building imx5 standalone results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Miao <eric.miao@linaro.org> Cc: stable@vger.kernel.org
2012-08-23ARM: imx: select CPU_FREQ_TABLE when neededArnd Bergmann
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Yong Shen <yong.shen@linaro.org> Cc: stable@vger.kernel.org
2012-08-23ARM: imx: fix ksz9021rn_phy_fixupArnd Bergmann
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to set up an ethernet phy if they can. They do check whether phylib is enabled, but unfortunately the functions can only be called from platform code if phylib is builtin, not if it is a module Without this patch, building with a modular phylib results in: arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init': arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function) arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in The bug was originally reported by Artem Bityutskiy but only partially fixed in ef441806 "ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled". Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-23ARM: imx: build pm-imx5 code only when PM is enabledArnd Bergmann
This moves the imx5 pm code out of the list of unconditionally compiled files for imx5, mirroring what we already do for imx6 and how it was done before the code was move from mach-mx5 to mach-imx in v3.3. Without this patch, building with CONFIG_PM disabled results in: arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-08-23ARM: omap: allow building omap44xx without SMPArnd Bergmann
The new omap4 cpuidle implementation currently requires ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP. This patch makes it possible to build a non-SMP kernel for that platform. This is not normally desired for end-users but can be useful for testing. Without this patch, building rand-0y2jSKT results in: drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke': drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration] It's not clear if this patch is the best solution for the problem at hand. I have made sure that we can now build the kernel in all configurations, but that does not mean it will actually work on an OMAP44xx. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-08-23Merge tag 'ux500-fixes-v3.6-rc2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes From Linus Walleij <linus.walleij@linaro.org>: Here are two audio fixes for the ux500 found by Lee Jones. * tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23Merge branch 'v3.6-samsung-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: For HDMI, already HDMI support for EXYNOS in mainline kernel is broken because its configuration moved to platform data but regarding platform data didn't support yet. And others are for fix warnings. * 'v3.6-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set HDMI platform data in Origen board ARM: EXYNOS: Set HDMI platform data in SMDKV310 ARM: SAMSUNG: Add API to set platform data for s5p-tv driver ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs ARM: Samsung: Make uart_save static in pm.c file ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters ARM: S3C24XX: Add missing DMACH_DT_PROP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23Merge branch 'imx/fixes-for-3.6' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes * 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx51-babbage: fix esdhc cd/wp properties ARM: imx6: spin the cpu until hardware takes it down ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path Also updates to Linux 3.6-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.Konrad Rzeszutek Wilk
When we are finished with return PFNs to the hypervisor, then populate it back, and also mark the E820 MMIO and E820 gaps as IDENTITY_FRAMEs, we then call P2M to set areas that can be used for ballooning. We were off by one, and ended up over-writting a P2M entry that most likely was an IDENTITY_FRAME. For example: 1-1 mapping on 40000->40200 1-1 mapping on bc558->bc5ac 1-1 mapping on bc5b4->bc8c5 1-1 mapping on bc8c6->bcb7c 1-1 mapping on bcd00->100000 Released 614 pages of unused memory Set 277889 page(s) to 1-1 mapping Populating 40200-40466 pfn range: 614 pages added => here we set from 40466 up to bc559 P2M tree to be INVALID_P2M_ENTRY. We should have done it up to bc558. The end result is that if anybody is trying to construct a PTE for PFN bc558 they end up with ~PAGE_PRESENT. CC: stable@vger.kernel.org Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-23MIPS: pci-ar724x: avoid data bus error due to a missing PCIe moduleGabor Juhos
If the controller has no PCIe module attached, accessing of the device configuration space causes a data bus error. Avoid this by checking the status of the PCIe link in advance, and indicate an error if the link is down. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4293/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 23:07:35 +0000