aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-20Linux 3.8.4v3.8.4Greg Kroah-Hartman
2013-03-20Revert "drm/i915: reorder setup sequence to have irqs for output setup"Greg Kroah-Hartman
Revert commit 2a9810441fcc26cf3f006f015f8a62094fe57a90 which is commit 52d7ecedac3f96fb562cb482c139015372728638 upstream. This caused problems in 3.8-stable, but all is fine in 3.9-rc. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-20Revert "drm/i915: enable irqs earlier when resuming"Greg Kroah-Hartman
This reverts commit 31f14f4219d2a74b7a6d86c7798f49141b5eccbe which was commit 15239099d7a7a9ecdc1ccb5b187ae4cda5488ff9 upstream. It caused problems in the 3.8-stable series, but 3.9-rc is just fine. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ilya Tumaykin <itumaykin@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-206lowpan: Fix endianness issue in is_addr_link_local().YOSHIFUJI Hideaki
[ Upstream commit 9026c4927254f5bea695cc3ef2e255280e6a3011 ] Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20dcbnl: fix various netlink info leaksMathias Krause
[ Upstream commit 29cd8ae0e1a39e239a3a7b67da1986add1199fc0 ] The dcb netlink interface leaks stack memory in various places: * perm_addr[] buffer is only filled at max with 12 of the 32 bytes but copied completely, * no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand, so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes for ieee_pfc structs, etc., * the same is true for CEE -- no in-kernel driver fills the whole struct, Prevent all of the above stack info leaks by properly initializing the buffers/structures involved. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20rtnl: fix info leak on RTM_GETLINK request for VF devicesMathias Krause
[ Upstream commit 84d73cd3fb142bf1298a8c13fd4ca50fd2432372 ] Initialize the mac address buffer with 0 as the driver specific function will probably not fill the whole buffer. In fact, all in-kernel drivers fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible bytes. Therefore we currently leak 26 bytes of stack memory to userland via the netlink interface. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20bridge: fix mdb info leaksMathias Krause
[ Upstream commit c085c49920b2f900ba716b4ca1c1a55ece9872cc ] The bridging code discloses heap and stack bytes via the RTM_GETMDB netlink interface and via the notify messages send to group RTNLGRP_MDB afer a successful add/del. Fix both cases by initializing all unset members/padding bytes with memset(0). Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ipv6: stop multicast forwarding to process interface scoped addressesHannes Frederic Sowa
[ Upstream commit ddf64354af4a702ee0b85d0a285ba74c7278a460 ] v2: a) used struct ipv6_addr_props v3: a) reverted changes for ipv6_addr_props v4: a) do not use __ipv6_addr_needs_scope_id Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20bridging: fix rx_handlers return codeCristian Bercaru
[ Upstream commit 3bc1b1add7a8484cc4a261c3e128dbe1528ce01f ] The frames for which rx_handlers return RX_HANDLER_CONSUMED are no longer counted as dropped. They are counted as successfully received by 'netif_receive_skb'. This allows network interface drivers to correctly update their RX-OK and RX-DRP counters based on the result of 'netif_receive_skb'. Signed-off-by: Cristian Bercaru <B43982@freescale.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20netlabel: correctly list all the static label mappingsPaul Moore
[ Upstream commits 0c1233aba1e948c37f6dc7620cb7c253fcd71ce9 and a6a8fe950e1b8596bb06f2c89c3a1a4bf2011ba9 ] When we have a large number of static label mappings that spill across the netlink message boundary we fail to properly save our state in the netlink_callback struct which causes us to repeat the same listings. This patch fixes this problem by saving the state correctly between calls to the NetLabel static label netlink "dumpit" routines. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.Vlad Yasevich
[ Upstream commit 87ab7f6f2874f1115817e394a7ed2dea1c72549e ] Macvlan already supports hw address filters. Set the IFF_UNICAST_FLT so that it doesn't needlesly enter PROMISC mode when macvlans are stacked. Signed-of-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20team: unsyc the devices addresses when port is removedVlad Yasevich
[ Upstream commit ba81276b1a5e3cf0674cb0e6d9525e5ae0c98695 ] When a team port is removed, unsync all devices addresses that may have been synched to the port devices. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20bonding: fire NETDEV_RELEASE event only on 0 slavesVeaceslav Falico
[ Upstream commit 80028ea1c0afc24d4ddeb8dd2a9992fff03616ca ] Currently, if we set up netconsole over bonding and release a slave, netconsole will stop logging on the whole bonding device. Change the behavior to stop the netconsole only when the last slave is released. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20vxlan: fix oops when delete netns containing vxlanZang MingJie
[ Upstream commit 9cb6cb7ed11cd3b69c47bb414983603a6ff20b1d ] The following script will produce a kernel oops: sudo ip netns add v sudo ip netns exec v ip ad add 127.0.0.1/8 dev lo sudo ip netns exec v ip link set lo up sudo ip netns exec v ip ro add 224.0.0.0/4 dev lo sudo ip netns exec v ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev lo sudo ip netns exec v ip link set vxlan0 up sudo ip netns del v where inspect by gdb: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 107] 0xffffffffa0289e33 in ?? () (gdb) bt #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 #1 vxlan_stop (dev=0xffff88001bafa000) at drivers/net/vxlan.c:1087 #2 0xffffffff812cc498 in __dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1299 #3 0xffffffff812cd920 in dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1335 #4 0xffffffff812cef31 in rollback_registered_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:4851 #5 0xffffffff812cf040 in unregister_netdevice_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:5752 #6 0xffffffff812cf1ba in default_device_exit_batch (net_list=0xffff88001f2e7e18) at net/core/dev.c:6170 #7 0xffffffff812cab27 in cleanup_net (work=<optimized out>) at net/core/net_namespace.c:302 #8 0xffffffff810540ef in process_one_work (worker=0xffff88001ba9ed40, work=0xffffffff8167d020) at kernel/workqueue.c:2157 #9 0xffffffff810549d0 in worker_thread (__worker=__worker@entry=0xffff88001ba9ed40) at kernel/workqueue.c:2276 #10 0xffffffff8105870c in kthread (_create=0xffff88001f2e5d68) at kernel/kthread.c:168 #11 <signal handler called> #12 0x0000000000000000 in ?? () #13 0x0000000000000000 in ?? () (gdb) fr 0 #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 533 struct sock *sk = vn->sock->sk; (gdb) l 528 static int vxlan_leave_group(struct net_device *dev) 529 { 530 struct vxlan_dev *vxlan = netdev_priv(dev); 531 struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); 532 int err = 0; 533 struct sock *sk = vn->sock->sk; 534 struct ip_mreqn mreq = { 535 .imr_multiaddr.s_addr = vxlan->gaddr, 536 .imr_ifindex = vxlan->link, 537 }; (gdb) p vn->sock $4 = (struct socket *) 0x0 The kernel calls `vxlan_exit_net` when deleting the netns before shutting down vxlan interfaces. Later the removal of all vxlan interfaces, where `vn->sock` is already gone causes the oops. so we should manually shutdown all interfaces before deleting `vn->sock` as the patch does. Signed-off-by: Zang MingJie <zealot0630@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tun: add a missing nf_reset() in tun_net_xmit()Eric Dumazet
[ Upstream commit f8af75f3517a24838a36eb5797a1a3e60bf9e276 ] Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20 [<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100 [<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0 [<ffffffff8151a666>] kfree_skb+0x36/0xa0 [<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40 [<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun] [<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun] [<ffffffff8119669c>] __fput+0xec/0x240 [<ffffffff811967fe>] ____fput+0xe/0x10 [<ffffffff8107eb27>] task_work_run+0xa7/0xe0 [<ffffffff810149e1>] do_notify_resume+0x71/0xb0 [<ffffffff81640152>] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP <ffff880276913d78> This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tcp: fix double-counted receiver RTT when leaving receiver fast pathNeal Cardwell
[ Upstream commit aab2b4bf224ef8358d262f95b568b8ad0cecf0a0 ] We should not update ts_recent and call tcp_rcv_rtt_measure_ts() both before and after going to step5. That wastes CPU and double-counts the receiver-side RTT sample. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20net: ipv6: Don't purge default router if accept_ra=2Lorenzo Colitti
[ Upstream commit 3e8b0ac3e41e3c882222a5522d5df7212438ab51 ] Setting net.ipv6.conf.<interface>.accept_ra=2 causes the kernel to accept RAs even when forwarding is enabled. However, enabling forwarding purges all default routes on the system, breaking connectivity until the next RA is received. Fix this by not purging default routes on interfaces that have accept_ra=2. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20rds: limit the size allocated by rds_message_alloc()Cong Wang
[ Upstream commit ece6b0a2b25652d684a7ced4ae680a863af041e0 ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ #65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by: Dave Jones <davej@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20atl1c: restore buffer stateHuang, Xiong
[ Upstream commit 7cb08d7f3a5ea6131f4f243c2080530ac41cb293 ] in the previous commit : f1f220ea1dda078, the BUSY state of buffer is wrongly deleted. this patch just restore it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20l2tp: Restore socket refcount when sendmsg succeedsGuillaume Nault
[ Upstream commit 8b82547e33e85fc24d4d172a93c796de1fefa81a ] The sendmsg() syscall handler for PPPoL2TP doesn't decrease the socket reference counter after successful transmissions. Any successful sendmsg() call from userspace will then increase the reference counter forever, thus preventing the kernel's session and tunnel data from being freed later on. The problem only happens when writing directly on L2TP sockets. PPP sockets attached to L2TP are unaffected as the PPP subsystem uses pppol2tp_xmit() which symmetrically increase/decrease reference counters. This patch adds the missing call to sock_put() before returning from pppol2tp_sendmsg(). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATSGuenter Roeck
commit 726bc6b092da4c093eb74d13c07184b18c1af0f1 upstream. Building sctp may fail with: In function ‘copy_from_user’, inlined from ‘sctp_getsockopt_assoc_stats’ at net/sctp/socket.c:5656:20: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct if built with W=1 due to a missing parameter size validation before the call to copy_from_user. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20loopdev: remove an user triggerable oopsGuo Chao
commit b1a6650406875b9097a032eed89af50682fe1160 upstream. When loopdev is built as module and we pass an invalid parameter, loop_init() will return directly without deregister misc device, which will cause an oops when insert loop module next time because we left some garbage in the misc device list. Test case: sudo modprobe loop max_part=1024 (failed due to invalid parameter) sudo modprobe loop (oops) Clean up nicely to avoid such oops. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20loopdev: fix a deadlockGuo Chao
commit 5370019dc2d2c2ff90e95d181468071362934f3a upstream. bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20block: use i_size_write() in bd_set_size()Guo Chao
commit d646a02a9d44d1421f273ae3923d97b47b918176 upstream. blkdev_ioctl(GETBLKSIZE) uses i_size_read() to read size of block device. If we update block size directly, reader may see intermediate result in some machines and configurations. Use i_size_write() instead. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20net/mlx4_en: Disable RFS when running in SRIOV modeAmir Vadai
commit a229e488ac3f904d06c20d8d3f47831db3c7a15a upstream. Commit 37706996 "mlx4_en: fix allocation of CPU affinity reverse-map" fixed a bug when mlx4_dev->caps.comp_pool is larger from the device rx rings, but introduced a regression. When the mlx4_core is activating its "legacy mode" (e.g when running in SRIOV mode) w.r.t to EQs/IRQs usage, comp_pool becomes zero and we're crashing on divide by zero alloc_cpu_rmap. Fix that by enabling RFS only when running in non-legacy mode. Reported-by: Yan Burman <yanb@mellanox.com> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20net/mlx4_en: Initialize RFS filters lock and list in init_netdevAmir Vadai
commit 78fb2de711ec28997bf38bcf3e48e108e907be77 upstream. filters_lock might have been used while it was re-initialized. Moved filters_lock and filters_list initialization to init_netdev instead of alloc_resources which is called every time the device is configured. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20atmel_lcdfb: fix 16-bpp modes on older SOCsJohan Hovold
commit a79eac7165ed62114e6ca197195aa5060a54f137 upstream. Fix regression introduced by commit 787f9fd23283 ("atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp modes for older SOCs which use IBGR:555 (msb is intensity) rather than BGR:565. Use SOC-type to determine the pixel layout. Tested on at91sam9263 and at91sam9g45. Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20kbuild: fix make headers_check with make 3.80Sam Ravnborg
commit c4619bc6fa5149a6ab39be845a39142b6a996ea5 upstream. Commit 10b63956 ("UAPI: Plumb the UAPI Kbuilds into the user header installation and checking") introduced a dependency of make 3.81 due to use of $(or ...) We do not want to lift the requirement to gmake 3.81 just yet... Included are a straightforward conversion to $(if ...) Bisected-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDYBrian Norris
commit 5bc7c33ca93a285dcfe7b7fd64970f6314440ad1 upstream. This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e ("mtd: nand: kill NAND_NO_READRDY"). In that patch I overlooked a few things. The original documentation for NAND_NO_READRDY included "True for all large page devices, as they do not support autoincrement." I was conflating "not support autoincrement" with the NAND_NO_AUTOINCR option, which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I concluded that I then could harmlessly drop NAND_NO_READRDY. But of course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean NAND_NO_READRDY was doing nothing... So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied only to those few remaining small-page NAND which needed it in the first place. Reported-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20btrfs: use rcu_barrier() to wait for bdev puts at unmountEric Sandeen
commit bc178622d40d87e75abc131007342429c9b03351 upstream. Doing this would reliably fail with -EBUSY for me: # mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2 ... unable to open /dev/sdb2: Device or resource busy because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it. Using systemtap to track bdev gets & puts shows a kworker thread doing a blkdev put after mkfs attempts a get; this is left over from the unmount path: btrfs_close_devices __btrfs_close_devices call_rcu(&device->rcu, free_device); free_device INIT_WORK(&device->rcu_work, __free_device); schedule_work(&device->rcu_work); so unmount might complete before __free_device fires & does its blkdev_put. Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait until all blkdev_put()s are done, and the device is truly free once unmount completes. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20s390/mm: fix flush_tlb_kernel_range()Heiko Carstens
commit f6a70a07079518280022286a1dceb797d12e1edf upstream. Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with &init_mm as argument. __tlb_flush_mm() however will only flush tlbs for the passed in mm if its mm_cpumask is not empty. For the init_mm however its mm_cpumask has never any bits set. Which in turn means that our flush_tlb_kernel_range() implementation doesn't work at all. This can be easily verified with a vmalloc/vfree loop which allocates a page, writes to it and then frees the page again. A crash will follow almost instantly. To fix this remove the cpumask_empty() check in __tlb_flush_mm() since there shouldn't be too many mms with a zero mm_cpumask, besides the init_mm of course. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20s390: critical section cleanup vs. machine checksMartin Schwidefsky
commit 6551fbdfd8b85d1ab5822ac98abb4fb449bcfae0 upstream. The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20perf,x86: fix link failure for non-Intel configsDavid Rientjes
commit 6c4d3bc99b3341067775efd4d9d13cc8e655fd7c upstream. Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20perf,x86: fix wrmsr_on_cpu() warning on suspend/resumeLinus Torvalds
commit 2a6e06b2aed6995af401dcd4feb5e79a0c7ea554 upstream. Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20selinux: use GFP_ATOMIC under spin_lockDan Carpenter
commit 4502403dcf8f5c76abd4dbab8726c8e4ecb5cd34 upstream. The call tree here is: sk_clone_lock() <- takes bh_lock_sock(newsk); xfrm_sk_clone_policy() __xfrm_sk_clone_policy() clone_policy() <- uses GFP_ATOMIC for allocations security_xfrm_policy_clone() security_ops->xfrm_policy_clone_security() selinux_xfrm_policy_clone() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830Matt Porter
commit 069552777a121eb39da29de4bc0383483dbe1f7e upstream. This adds additional error checking to the private edma api implementation to catch the case where the edma_alloc_slot() has an invalid controller parameter. The edma dmaengine wrapper driver relies on this condition being handled in order to avoid setting up a second edma dmaengine instance on DA830. Verfied using a DA850 with the second EDMA controller platform instance removed to simulate a DA830 which only has a single EDMA controller. Reported-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20powerpc: Rename USER_ESID_BITS* to ESID_BITS*Aneesh Kumar K.V
commit af81d7878c641629f2693ae3fdaf74b4af14dfca upstream. Now we use ESID_BITS of kernel address to build proto vsid. So rename USER_ESIT_BITS to ESID_BITS Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20powerpc: Update kernel VSID rangeAneesh Kumar K.V
commit c60ac5693c47df32a2b4b18af97fca5635def015 upstream. This patch change the kernel VSID range so that we limit VSID_BITS to 37. This enables us to support 64TB with 65 bit VA (37+28). Without this patch we have boot hangs on platforms that only support 65 bit VA. With this patch we now have proto vsid generated as below: We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated from mmu context id and effective segment id of the address. For user processes max context id is limited to ((1ul << 19) - 5) for kernel space, we use the top 4 context ids to map address as below 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20powerpc: Make VSID_BITS* dependency explicitAneesh Kumar K.V
commit e39d1a471484662620651cd9520250d33843f235 upstream. VSID_BITS and VSID_BITS_1T depends on the context bits and user esid bits. Make the dependency explicit Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20powerpc: Fix cputable entry for 970MP rev 1.0Benjamin Herrenschmidt
commit d63ac5f6cf31c8a83170a9509b350c1489a7262b upstream. Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update the entry for the 970MP rev 1.0 processor when moving some CPU features bits to the MMU feature bit mask. This breaks booting on some rare G5 models using that chip revision. Reported-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20powerpc: Fix STAB initializationBenjamin Herrenschmidt
commit 13938117a57f88a22f0df9722a5db7271fda85cd upstream. Commit f5339277eb8d3aed37f12a27988366f68ab68930 accidentally removed more than just iSeries bits and took out the call to stab_initialize() thus breaking support for POWER3 processors. Put it back. (Yes, nobody noticed until now ...) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20w1: fix oops when w1_search is called from netlink connectorMarcin Jurkowski
commit 9d1817cab2f030f6af360e961cc69bb1da8ad765 upstream. On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote: > This is the bad commit I found doing git bisect: > 04f482faf50535229a5a5c8d629cf963899f857c is the first bad commit > commit 04f482faf50535229a5a5c8d629cf963899f857c > Author: Patrick McHardy <kaber@trash.net> > Date: Mon Mar 28 08:39:36 2011 +0000 Good job. I was too lazy to bisect for bad commit;) Reading the code I found problematic kthread_should_stop call from netlink connector which causes the oops. After applying a patch, I've been testing owfs+w1 setup for nearly two days and it seems to work very reliable (no hangs, no memleaks etc). More detailed description and possible fix is given below: Function w1_search can be called from either kthread or netlink callback. While the former works fine, the latter causes oops due to kthread_should_stop invocation. This patch adds a check if w1_search is serving netlink command, skipping kthread_should_stop invocation if so. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Josh Boyer <jwboyer@gmail.com> Tested-by: Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20w1-gpio: remove erroneous __exit and __exit_p()Johan Hovold
commit 01230551e7c2fb9a1c2519b356d703851049cbe0 upstream. Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") changed (apparently unknowingly) the driver to a hotpluggable platform-device driver but did not not update the section markers for probe and remove (to __devinit/exit, which have since been removed). A later commit fixed the section mismatch for probe, but left remove marked with __exit. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20hwmon: (lineage-pem) Add missing terminating entry for ↵Axel Lin
pem_[input|fan]_attributes commit df069079c153d22adf6c28dcc0b1cf62bba75167 upstream. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20hwmon: (pmbus/ltc2978) Fix temperature reportingGuenter Roeck
commit 8c958c703ef8804093437959221951eaf0e1e664 upstream. On LTC2978, only READ_TEMPERATURE is supported. It reports the internal junction temperature. This register is unpaged. On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported. READ_TEMPERATURE is paged and reports external temperatures. READ_TEMPERATURE2 is unpaged and reports the internal junction temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ARM: w1-gpio: fix erroneous gpio requestsJohan Hovold
commit 2d798a3f20ae992b0b69a2b68c04ada397c32ed4 upstream. Fix regression introduced by commit d2323cf773 ("onewire: w1-gpio: add ext_pullup_enable pin in platform data") which added a gpio entry to the platform data, but did not add the required initialisers to the board files using it. Consequently, the driver would request gpio 0 at probe, which could break other uses of the corresponding pin. On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for instance, breaks SPI0 on at91sam9g20. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ALSA: seq: Fix missing error handling in snd_seq_timer_open()Takashi Iwai
commit 66efdc71d95887b652a742a5dae51fa834d71465 upstream. snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20perf,x86: fix kernel crash with PEBS/BTS after suspend/resumeStephane Eranian
commit 1d9d8639c063caf6efc2447f5f26aa637f844ff6 upstream. This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ARM: kirkwood: fix to retain gbe MAC addresses for DT kernelsSebastian Hesselbarth
commit 7bf5b408b419fc849578e6e9fbd221bf43638eb6 upstream. The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20Fix 4 port and add support for 8 port 'Unknown' PCI serial port cardsScott Ashcroft
commit d13402a4a944e72612a9ec5c9190e35717c02a9d upstream. I've managed to find an 8 port version of the card 4 port card which was discussed here: http://marc.info/?l=linux-serial&m=120760744205314&w=2 Looking back at that thread there were two issues in the original patch. 1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post. 2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return. This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card. $ lspci -vvv -n -s 00:08.0 00:08.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1588 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Region 1: I/O ports at ff00 [size=128] Region 2: I/O ports at fe00 [size=64] Region 3: I/O ports at fd00 [size=8] Capabilities: <access denied> Kernel driver in use: serial $ dmesg | grep 0000:00:08.0: [ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780 [ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f] [ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f] [ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07] [ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot [ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A [ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A [ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A [ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A [ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A [ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A [ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A [ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 18:37:00 +0000