aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-06workqueue: ensure @task is valid across kthread_stop()Lai Jiangshan
commit 5bdfff96c69a4d5ab9c49e60abf9e070ecd2acbb upstream. When a kworker should die, the kworkre is notified through WORKER_DIE flag instead of kthread_should_stop(). This, IIRC, is primarily to keep the test synchronized inside worker_pool lock. WORKER_DIE is first set while holding pool->lock, the lock is dropped and kthread_stop() is called. Unfortunately, this means that there's a slight chance that the target kworker may see WORKER_DIE before kthread_stop() finishes and exits and frees the target task before or during kthread_stop(). Fix it by pinning the target task before setting WORKER_DIE and putting it after kthread_stop() is done. tj: Improved patch description and comment. Moved pinning above WORKER_DIE for better signify what it's protecting. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06hwmon: (max1668) Fix writing the minimum temperatureGuenter Roeck
commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream. When trying to set the minimum temperature, the driver was erroneously writing the maximum temperature into the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06mei: set client's read_cb to NULL when flow control failsChao Bi
commit accb884b32e82f943340688c9cd30290531e73e0 upstream. In mei_cl_read_start(), if it fails to send flow control request, it will release "cl->read_cb" but forget to set pointer to NULL, leaving "cl->read_cb" still pointing to random memory, next time this client is operated like mei_release(), it has chance to refer to this wrong pointer. Fixes: PANIC at kfree in mei_release() [228781.826904] Call Trace: [228781.829737] [<c16249b8>] ? mei_cl_unlink+0x48/0xa0 [228781.835283] [<c1624487>] mei_io_cb_free+0x17/0x30 [228781.840733] [<c16265d8>] mei_release+0xa8/0x180 [228781.845989] [<c135c610>] ? __fsnotify_parent+0xa0/0xf0 [228781.851925] [<c1325a69>] __fput+0xd9/0x200 [228781.856696] [<c1325b9d>] ____fput+0xd/0x10 [228781.861467] [<c125cae1>] task_work_run+0x81/0xb0 [228781.866821] [<c1242e53>] do_exit+0x283/0xa00 [228781.871786] [<c1a82b36>] ? kprobe_flush_task+0x66/0xc0 [228781.877722] [<c124eeb8>] ? __dequeue_signal+0x18/0x1a0 [228781.883657] [<c124f072>] ? dequeue_signal+0x32/0x190 [228781.889397] [<c1243744>] do_group_exit+0x34/0xa0 [228781.894750] [<c12517b6>] get_signal_to_deliver+0x206/0x610 [228781.901075] [<c12018d8>] do_signal+0x38/0x100 [228781.906136] [<c1626d1c>] ? mei_read+0x42c/0x4e0 [228781.911393] [<c12600a0>] ? wake_up_bit+0x30/0x30 [228781.916745] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.922001] [<c1324be9>] ? vfs_read+0x89/0x160 [228781.927158] [<c16268f0>] ? mei_poll+0x120/0x120 [228781.932414] [<c133ca34>] ? fget_light+0x44/0xe0 [228781.937670] [<c1324e58>] ? SyS_read+0x68/0x80 [228781.942730] [<c12019f5>] do_notify_resume+0x55/0x70 [228781.948376] [<c1a7de5d>] work_notifysig+0x29/0x30 [228781.953827] [<c1a70000>] ? bad_area+0x5/0x3e Signed-off-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06USB: ftdi_sio: add Cressi Leonardo PIDJoerg Dorchain
commit 6dbd46c849e071e6afc1e0cad489b0175bca9318 upstream. Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain <joerg@dorchain.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06usb: ehci: fix deadlock when threadirqs option is usedStanislaw Gruszka
commit a1227f3c1030e96ebc51d677d2f636268845c5fb upstream. ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when threadirqs option is used. To prevent the deadlock use spin_lock_irqsave() in ehci_irq(). This change can be reverted when hrtimer callbacks become threaded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8Aleksander Morgado
commit 12df84d4a80278a5b1abfec3206795291da52fc9 upstream. This interface is to be handled by the qmi_wwan driver. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06usb: gadget: bcm63xx_udc: fix build failure on DMA channel codeFlorian Fainelli
commit 2d1f7af3d60dd09794e0738a915d272c6c27abc5 upstream. Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet") changed the ENETDMA[CS] macros such that they are no longer macros, but actual register offset definitions. The bcm63xx_udc driver was not updated, and as a result, causes the following build error to pop up: CC drivers/usb/gadget/u_ether.o drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write': drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel': drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not a function Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to take an extra channel argument, and use the channel width (ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence doing again what the macro implicitely did for us. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06usb: chipidea: need to mask when writting endptflush and endptprimeMatthieu CASTET
commit 5bf5dbeda2454296f1984adfbfc8e6f5965ac389 upstream. ENDPTFLUSH and ENDPTPRIME registers are set by software and clear by hardware. There is a bit for each endpoint. When we are setting a bit for an endpoint we should make sure we do not touch other endpoint bit. There is a race condition if the hardware clear the bit between the read and the write in hw_write. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06can: kvaser_usb: check number of channels returned by HWOlivier Sobrie
commit 862474f8b46f6c1e600d4934e40ba40646c696ec upstream. It is needed to check the number of channels returned by the HW because it cannot be greater than MAX_NET_DEVICES otherwise it will crash. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ACPI / processor: Rework processor throttling with work_on_cpu()Lan Tianyu
commit f3ca4164529b875374c410193bbbac0ee960895f upstream. acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make sure that the (struct acpi_processor)->acpi_processor_set_throttling() callback will run on the right CPU. However, the function may be called from a worker thread already bound to a different CPU in which case that won't work. Make acpi_processor_set_throttling() use work_on_cpu() as appropriate instead of abusing set_cpus_allowed_ptr(). Reported-and-tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ACPI / video: Filter the _BCL table for duplicate brightness valuesHans de Goede
commit bd8ba20597f0cfef3ef65c3fd2aa92ab23d4c8e1 upstream. Some devices have duplicate entries in there brightness levels table, ie on my Dell Latitude E6430 the table looks like this: [ 3.686060] acpi backlight index 0, val 80 [ 3.686095] acpi backlight index 1, val 50 [ 3.686122] acpi backlight index 2, val 5 [ 3.686147] acpi backlight index 3, val 5 [ 3.686172] acpi backlight index 4, val 5 [ 3.686197] acpi backlight index 5, val 5 [ 3.686223] acpi backlight index 6, val 5 [ 3.686248] acpi backlight index 7, val 5 [ 3.686273] acpi backlight index 8, val 6 [ 3.686332] acpi backlight index 9, val 7 [ 3.686356] acpi backlight index 10, val 8 [ 3.686380] acpi backlight index 11, val 9 etc. Notice that brightness values 0-5 are all mapped to 5. This means that if userspace writes any value between 0 and 5 to the brightness sysfs attribute and then reads it, it will always return 0, which is somewhat unexpected. This is a problem for ie gnome-settings-daemon, which uses read-modify-write logic when the users presses the brightness up or down keys. This is done this way to take brightness changes from other sources into account. On this specific laptop what happens once the brightness has been set to 0, is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press again reads 0, so things get stuck at the lowest brightness setting. Filtering out the duplicate table entries, makes any write to brightness read back as the written value as one would expect, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06i7core_edac: Fix PCI device reference countJean Delvare
commit c0f5eeed0f4cef4f05b74883a7160e7edde58b6a upstream. The reference count changes done by pci_get_device can be a little misleading when the usage diverges from the most common scheme. The reference count of the device passed as the last parameter is always decreased, even if the function returns no new device. So if we are going to try alternative device IDs, we must manually increment the device reference count before each retry. If we don't, we end up decreasing the reference count, and after a few modprobe/rmmod cycles the PCI devices will vanish. In other words and as Alan put it: without this fix the EDAC code corrupts the PCI device list. This fixes kernel bug #50491: https://bugzilla.kernel.org/show_bug.cgi?id=50491 Signed-off-by: Jean Delvare <jdelvare@suse.de> Link: http://lkml.kernel.org/r/20140224093927.7659dd9d@endymion.delvare Reviewed-by: Alan Cox <alan@linux.intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()Tomasz Nowicki
commit b685f3b1744061aa9ad822548ba9c674de5be7c6 upstream. acpi_pci_link_allocate_irq() can return negative gsi even if entry != NULL. For that case we have a memory leak, so free entry before returning from acpi_pci_irq_enable() for gsi < 0. Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06PCI: Enable INTx if BIOS left them disabledBjorn Helgaas
commit 1f42db786b14a31bf807fc41ee5583a00c08fcb1 upstream. Some firmware leaves the Interrupt Disable bit set even if the device uses INTx interrupts. Clear Interrupt Disable so we get those interrupts. Based on the report mentioned below, if the user selects the "EHCI only" option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS with the PCI_COMMAND_INTX_DISABLE bit set. Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601 Reported-by: Chris Cheng <chris.cheng@atrustcorp.com> Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06cpufreq: powernow-k8: Initialize per-cpu data-structures properlySrivatsa S. Bhat
commit c3274763bfc3bf1ececa269ed6e6c4d7ec1c3e5e upstream. The powernow-k8 driver maintains a per-cpu data-structure called powernow_data that is used to perform the frequency transitions. It initializes this data structure only for the policy->cpu. So, accesses to this data structure by other CPUs results in various problems because they would have been uninitialized. Specifically, if a cpu (!= policy->cpu) invokes the drivers' ->get() function, it returns 0 as the KHz value, since its per-cpu memory doesn't point to anything valid. This causes problems during suspend/resume since cpufreq_update_policy() tries to enforce this (0 KHz) as the current frequency of the CPU, and this madness gets propagated to adjust_jiffies() as well. Eventually, lots of things start breaking down, including the r8169 ethernet card, in one particularly interesting case reported by Pierre Ossman. Fix this by initializing the per-cpu data-structures of all the CPUs in the policy appropriately. References: https://bugzilla.kernel.org/show_bug.cgi?id=70311 Reported-by: Pierre Ossman <pierre@ossman.eu> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYNTejun Heo
commit 9f9c47f00ce99329b1a82e2ac4f70f0fe3db549c upstream. It's a bit odd to see a newer device showing mod15write; however, the reported behavior is highly consistent and other factors which could contribute seem to have been verified well enough. Also, both sata_sil itself and the drive are fairly outdated at this point making the risk of this change fairly low. It is possible, probably likely, that other drive models in the same family have the same problem; however, for now, let's just add the specific model which was tested. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: matson <lists-matsonpa@luxsci.me> References: http://lkml.kernel.org/g/201401211912.s0LJCk7F015058@rs103.luxsci.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ata: enable quirk from jmicron JMB350 for JMB394Denis V. Lunev
commit efb9e0f4f43780f0ae0c6428d66bd03e805c7539 upstream. Without the patch the kernel generates the following error. ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123' ata11.15: PMP revalidation failed (errno=-19) ata11.15: failed to recover PMP after 5 tries, giving up This patch helps to bypass this error and the device becomes functional. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: <linux-ide@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06perf/x86: Fix event schedulingPeter Zijlstra
commit 26e61e8939b1fe8729572dabe9a9e97d930dd4f6 upstream. Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures, with perf WARN_ON()s triggering. He also provided traces of the failures. This is I think the relevant bit: > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1 > pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800) So we add the insn:p event (fd[23]). At this point we should have: n_events = 2, n_added = 1, n_txn = 1 > pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800) > pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00) We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]). These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so that's not visible. group_sched_in() pmu->start_txn() /* nop - BP pmu */ event_sched_in() event->pmu->add() So here we should end up with: 0: n_events = 3, n_added = 2, n_txn = 2 4: n_events = 4, n_added = 3, n_txn = 3 But seeing the below state on x86_pmu_enable(), the must have failed, because the 0 and 4 events aren't there anymore. Looking at group_sched_in(), since the BP is the leader, its event_sched_in() must have succeeded, for otherwise we would not have seen the sibling adds. But since neither 0 or 4 are in the below state; their event_sched_in() must have failed; but I don't see why, the complete state: 0,0,1:p,4 fits perfectly fine on a core2. However, since we try and schedule 4 it means the 0 event must have succeeded! Therefore the 4 event must have failed, its failure will have put group_sched_in() into the fail path, which will call: event_sched_out() event->pmu->del() on 0 and the BP event. Now x86_pmu_del() will reduce n_events; but it will not reduce n_added; giving what we see below: n_event = 2, n_added = 2, n_txn = 2 > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2 > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0 So the problem is that x86_pmu_del(), when called from a group_sched_in() that fails (for whatever reason), and without x86_pmu TXN support (because the leader is !x86_pmu), will corrupt the n_added state. Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06x86: dma-mapping: fix GFP_ATOMIC macro usageMarek Szyprowski
commit c091c71ad2218fc50a07b3d1dab85783f3b77efd upstream. GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other flags, where meaningful is the LACK of __GFP_WAIT flag. To check if caller wants to perform an atomic allocation, the code must test for a lack of the __GFP_WAIT flag. This patch fixes the issue introduced in v3.5-rc1. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ahci: disable NCQ on Samsung pci-e SSDs on macbooksLevente Kurusa
commit 67809f85d31eac600f6b28defa5386c9d2a13b1d upstream. Samsung's pci-e SSDs with device ID 0x1600 which are found on some macbooks time out on NCQ commands. Blacklist NCQ on the device so that the affected machines can at least boot. Original-patch-by: Levente Kurusa <levex@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60731 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06powerpc/crashdump : Fix page frame number check in copy_oldmem_pageLaurent Dufour
commit f5295bd8ea8a65dc5eac608b151386314cb978f1 upstream. In copy_oldmem_page, the current check using max_pfn and min_low_pfn to decide if the page is backed or not, is not valid when the memory layout is not continuous. This happens when running as a QEMU/KVM guest, where RTAS is mapped higher in the memory. In that case max_pfn points to the end of RTAS, and a hole between the end of the kdump kernel and RTAS is not backed by PTEs. As a consequence, the kdump kernel is crashing in copy_oldmem_page when accessing in a direct way the pages in that hole. This fix relies on the memblock's service memblock_is_region_memory to check if the read page is part or not of the directly accessible memory. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctlyTony Breeds
commit 41dd03a94c7d408d2ef32530545097f7d1befe5c upstream. Currently we're storing a host endian RTAS token in rtas_stop_self_args.token. We then pass that directly to rtas. This is fine on big endian however on little endian the token is not what we expect. This will typically result in hitting: panic("Alas, I survived.\n"); To fix this we always use the stop-self token in host order and always convert it to be32 before passing this to rtas. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06SUNRPC: Fix races in xs_nospace()Trond Myklebust
commit 06ea0bfe6e6043cb56a78935a19f6f8ebc636226 upstream. When a send failure occurs due to the socket being out of buffer space, we call xs_nospace() in order to have the RPC task wait until the socket has drained enough to make it worth while trying again. The current patch fixes a race in which the socket is drained before we get round to setting up the machinery in xs_nospace(), and which is reported to cause hangs. Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown Fixes: a9a6b52ee1ba (SUNRPC: Don't start the retransmission timer...) Reported-by: Neil Brown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: wm8958-dsp: Fix firmware block loadingLars-Peter Clausen
commit 548da08fc1e245faf9b0d7c41ecd8e07984fc332 upstream. The codec->control_data contains a pointer to the device's regmap struct. But wm8994_bulk_write() expects a pointer to the parent wm8998 device. The issue was introduced in commit d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code"). Fixes: d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: sta32x: Fix array access overflowTakashi Iwai
commit 025c3fa9256d4c54506b7a29dc3befac54f5c68d upstream. Preset EQ enum of sta32x codec driver declares too many number of items and it may lead to the access over the actual array size. Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: sta32x: Fix wrong enum for limiter2 release rateTakashi Iwai
commit b3619b288b621e63f66908045f48495869a996a6 upstream. There is a typo in the Limiter2 Release Rate control, a wrong enum for Limiter1 is assigned. It must point to Limiter2. Spotted by a compile warning: In file included from sound/soc/codecs/sta32x.c:34:0: sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable] static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \ ^ sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’ static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: sta32x: Fix cache syncLars-Peter Clausen
commit 70ff00f82a6af0ff68f8f7b411738634ce2f20d0 upstream. codec->control_data contains a pointer to the regmap struct of the device, not to the device private data. Use snd_soc_codec_get_drvdata() instead. The issue was introduced in commit 29fdf4fbbe ("ASoC: sta32x: Convert to regmap"). Fixes: 29fdf4fbbe (ASoC: sta32x: Convert to regmap) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: da732x: Mark DC offset control registers volatileMark Brown
commit 75306820248e26d15d84acf4e297b9fb27dd3bb2 upstream. The driver reads from the DC offset control registers during callibration but since the registers are marked as volatile and there is a register cache the values will not be read from the hardware after the first reading rendering the callibration ineffective. It appears that the driver was originally written for the ASoC level register I/O code but converted to regmap prior to merge and this issue was missed during the conversion as the framework level volatile register functionality was not being used. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: wm8770: Fix wrong number of enum itemsTakashi Iwai
commit 7a6c0a58dc824523966f212c76322d47c5b0e6fe upstream. wm8770 codec driver defines ain_enum with a wrong number of items. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ASoC: max98090: sync regcache on entering STANDBYDylan Reid
commit c42c8922c46d33ed769e99618bdfba06866a0c72 upstream. Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06kvm: x86: fix emulator buffer overflow (CVE-2014-0049)Andrew Honig
commit a08d3b3b99efd509133946056531cdf8f3a0c09b upstream. The problem occurs when the guest performs a pusha with the stack address pointing to an mmio address (or an invalid guest physical address) to start with, but then extending into an ordinary guest physical address. When doing repeated emulated pushes emulator_read_write sets mmio_needed to 1 on the first one. On a later push when the stack points to regular memory, mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0. As a result, KVM exits to userspace, and then returns to complete_emulated_mmio. In complete_emulated_mmio vcpu->mmio_cur_fragment is incremented. The termination condition of vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved. The code bounces back and fourth to userspace incrementing mmio_cur_fragment past it's buffer. If the guest does nothing else it eventually leads to a a crash on a memcpy from invalid memory address. However if a guest code can cause the vm to be destroyed in another vcpu with excellent timing, then kvm_clear_async_pf_completion_queue can be used by the guest to control the data that's pointed to by the call to cancel_work_item, which can be used to gain execution. Fixes: f78146b0f9230765c6315b2e14f56112513389ad Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ALSA: hda - Enable front audio jacks on one HP desktop modelHui Wang
commit 1de7ca5e844866f56bebb2fc47fa18e090677e88 upstream. The front headphone and mic jackes on a HP desktop model (Vendor Id: 0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this machine has 8 physical ports, 6 of them are routed to rear jackes and all of them work very well, while the remaining 2 ports are routed to front headphone and mic jackes, but the corresponding pin complex node are not defined correctly. After apply this fix, the front audio jackes can work very well. [trivial fix of enum definition by tiwai] BugLink: https://bugs.launchpad.net/bugs/1282369 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by: Gerald Yang <gerald.yang@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ALSA: hda/ca0132 - Fix recording from mode id 0x8Hsin-Yu Chao
commit 13c12dbe3a2ce17227f7ddef652b6a53c78fa51f upstream. Incorrect ADC is picked in ca0132_capture_pcm_prepare(), where it assumes multiple streams while there is one stream per ADC. Note that ca0132_capture_pcm_cleanup() already does the right thing. The Chromebook Pixel has a microphone under the keyboard that is attached to node id 0x8. Before this fix, recording would always go to the main internal mic (node id 0x7). Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ALSA: hda/ca0132 - setup/cleanup streamsHsin-Yu Chao
commit 28fba95087a7f3d107a3a6728aef7dbfaf3fd782 upstream. When a HDMI stream is opened with the same stream tag as a following opened stream to ca0132, audio will be heard from two ports simultaneously. Fix this issue by change to use snd_hda_codec_setup_stream and snd_hda_codec_cleanup_stream instead, so that an inactive stream can be marked as 'dirty' when found with a conflict stream tag, and then get purified. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Chih-Chung Chang <chihchung@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ALSA: usb-audio: work around KEF X300A firmware bugClemens Ladisch
commit 624aef494f86ed0c58056361c06347ad62b26806 upstream. When the driver tries to access Function Unit 10, the KEF X300A speakers' firmware apparently locks up, making even PCM streaming impossible. Work around this by ignoring this FU. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06fs: fix iversion handlingChristoph Hellwig
commit dff6efc326a4d5f305797d4a6bba14f374fdd633 upstream. Currently notify_change directly updates i_version for size updates, which not only is counter to how all other fields are updated through struct iattr, but also breaks XFS, which need inode updates to happen under its own lock, and synchronized to the structure that gets written to the log. Remove the update in the common code, and it to btrfs and ext4, XFS already does a proper updaste internally and currently gets a double update with the existing code. IMHO this is 3.13 and -stable material and should go in through the XFS tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06memcg: fix endless loop caused by mem_cgroup_iterMichal Hocko
commit ecc736fc3c71c411a9d201d8588c9e7e049e5d8c upstream. Hugh has reported an endless loop when the hardlimit reclaim sees the same group all the time. This might happen when the reclaim races with the memcg removal. shrink_zone [rmdir root] mem_cgroup_iter(root, NULL, reclaim) // prev = NULL rcu_read_lock() mem_cgroup_iter_load last_visited = iter->last_visited // gets root || NULL css_tryget(last_visited) // failed last_visited = NULL [1] memcg = root = __mem_cgroup_iter_next(root, NULL) mem_cgroup_iter_update iter->last_visited = root; reclaim->generation = iter->generation mem_cgroup_iter(root, root, reclaim) // prev = root rcu_read_lock mem_cgroup_iter_load last_visited = iter->last_visited // gets root css_tryget(last_visited) // failed [1] The issue seemed to be introduced by commit 5f5781619718 ("memcg: relax memcg iter caching") which has replaced unconditional css_get/css_put by css_tryget/css_put for the cached iterator. This patch fixes the issue by skipping css_tryget on the root of the tree walk in mem_cgroup_iter_load and symmetrically doesn't release it in mem_cgroup_iter_update. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Hugh Dickins <hughd@google.com> Tested-by: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: use __GFP_NORETRY for high order allocationsEric Dumazet
[ Upstream commit ed98df3361f059db42786c830ea96e2d18b8d4db ] sock_alloc_send_pskb() & sk_page_frag_refill() have a loop trying high order allocations to prepare skb with low number of fragments as this increases performance. Problem is that under memory pressure/fragmentation, this can trigger OOM while the intent was only to try the high order allocations, then fallback to order-0 allocations. We had various reports from unexpected regressions. According to David, setting __GFP_NORETRY should be fine, as the asynchronous compaction is still enabled, and this will prevent OOM from kicking as in : CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0, oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled CFSClientEventm Call Trace: [<ffffffff8043766c>] dump_header+0xe1/0x23e [<ffffffff80437a02>] oom_kill_process+0x6a/0x323 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: ip, ipv6: handle gso skbs in forwarding pathFlorian Westphal
commit fe6cc55f3a9a053482a76f5a6b2257cee51b4663 upstream. Marcelo Ricardo Leitner reported problems when the forwarding link path has a lower mtu than the incoming one if the inbound interface supports GRO. Given: Host <mtu1500> R1 <mtu1200> R2 Host sends tcp stream which is routed via R1 and R2. R1 performs GRO. In this case, the kernel will fail to send ICMP fragmentation needed messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu checks in forward path. Instead, Linux tries to send out packets exceeding the mtu. When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does not fragment the packets when forwarding, and again tries to send out packets exceeding R1-R2 link mtu. This alters the forwarding dstmtu checks to take the individual gso segment lengths into account. For ipv6, we send out pkt too big error for gso if the individual segments are too big. For ipv4, we either send icmp fragmentation needed, or, if the DF bit is not set, perform software segmentation and let the output path create fragments when the packet is leaving the machine. It is not 100% correct as the error message will contain the headers of the GRO skb instead of the original/segmented one, but it seems to work fine in my (limited) tests. Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid sofware segmentation. However it turns out that skb_segment() assumes skb nr_frags is related to mss size so we would BUG there. I don't want to mess with it considering Herbert and Eric disagree on what the correct behavior should be. Hannes Frederic Sowa notes that when we would shrink gso_size skb_segment would then also need to deal with the case where SKB_MAX_FRAGS would be exceeded. This uses sofware segmentation in the forward path when we hit ipv4 non-DF packets and the outgoing link mtu is too small. Its not perfect, but given the lack of bug reports wrt. GRO fwd being broken this is a rare case anyway. Also its not like this could not be improved later once the dust settles. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: core: introduce netif_skb_dev_featuresFlorian Westphal
commit d206940319c41df4299db75ed56142177bb2e5f6 upstream. Will be used by upcoming ipv4 forward path change that needs to determine feature mask using skb->dst->dev instead of skb->dev. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: add and use skb_gso_transport_seglen()Florian Westphal
commit de960aa9ab4decc3304959f69533eef64d05d8e8 upstream. [ no skb_gso_seglen helper in 3.10, leave tbf alone ] This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: sctp: fix sctp_connectx abi for ia32 emulation/compat modeDaniel Borkmann
[ Upstream commit ffd5939381c609056b33b7585fb05a77b4c695f3 ] SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of 'struct sctp_getaddrs_old' which includes a struct sockaddr pointer, sizeof(param) check will always fail in kernel as the structure in 64bit kernel space is 4bytes larger than for user binaries compiled in 32bit mode. Thus, applications making use of sctp_connectx() won't be able to run under such circumstances. Introduce a compat interface in the kernel to deal with such situations by using a 'struct compat_sctp_getaddrs_old' structure where user data is copied into it, and then sucessively transformed into a 'struct sctp_getaddrs_old' structure with the help of compat_ptr(). That fixes sctp_connectx() abi without any changes needed in user space, and lets the SCTP test suite pass when compiled in 32bit and run on 64bit kernels. Fixes: f9c67811ebc0 ("sctp: Fix regression introduced by new sctp_connectx api") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06ipv4: fix counter in_slow_totDuan Jiong
[ Upstream commit a6254864c08109c66a194612585afc0439005286 ] since commit 89aef8921bf("ipv4: Delete routing cache."), the counter in_slow_tot can't work correctly. The counter in_slow_tot increase by one when fib_lookup() return successfully in ip_route_input_slow(), but actually the dst struct maybe not be created and cached, so we can increase in_slow_tot after the dst struct is created. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06bonding: 802.3ad: make aggregator_identifier bond-privateJiri Bohac
[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ] aggregator_identifier is used to assign unique aggregator identifiers to aggregators of a bond during device enslaving. aggregator_identifier is currently a global variable that is zeroed in bond_3ad_initialize(). This sequence will lead to duplicate aggregator identifiers for eth1 and eth3: create bond0 change bond0 mode to 802.3ad enslave eth0 to bond0 //eth0 gets agg id 1 enslave eth1 to bond0 //eth1 gets agg id 2 create bond1 change bond1 mode to 802.3ad enslave eth2 to bond1 //aggregator_identifier is reset to 0 //eth2 gets agg id 1 enslave eth3 to bond0 //eth3 gets agg id 2 Fix this by making aggregator_identifier private to the bond. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06usbnet: remove generic hard_header_len checkEmil Goode
[ Upstream commit eb85569fe2d06c2fbf4de7b66c263ca095b397aa ] This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: asix: add missing flag to struct driver_infoEmil Goode
[ Upstream commit d43ff4cd798911736fb39025ec8004284b1b0bc2 ] The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06tg3: Fix deadlock in tg3_change_mtu()Nithin Sujir
[ Upstream commit c6993dfd7db9b0c6b7ca7503a56fda9236a4710f ] Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06tcp: tsq: fix nonagle handlingJohn Ogness
[ Upstream commit bf06200e732de613a1277984bf34d1a21c2de03d ] Commit 46d3ceabd8d9 ("tcp: TCP Small Queues") introduced a possible regression for applications using TCP_NODELAY. If TCP session is throttled because of tsq, we should consult tp->nonagle when TX completion is done and allow us to send additional segment, especially if this segment is not a full MSS. Otherwise this segment is sent after an RTO. [edumazet] : Cooked the changelog, added another fix about testing sk_wmem_alloc twice because TX completion can happen right before setting TSQ_THROTTLED bit. This problem is particularly visible with recent auto corking, but might also be triggered with low tcp_limit_output_bytes values or NIC drivers delaying TX completion by hundred of usec, and very low rtt. Thomas Glanzmann for example reported an iscsi regression, caused by tcp auto corking making this bug quite visible. Fixes: 46d3ceabd8d9 ("tcp: TCP Small Queues") Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06net: qmi_wwan: add Netgear Aircard 340UBjørn Mork
[ Upstream commit fbd3a77d813f211060f86cc7a2f8416caf0e03b1 ] This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06netpoll: fix netconsole IPv6 setupSabrina Dubroca
[ Upstream commit 00fe11b3c67dc670fe6391d22f1fe64e7c99a8ec ] Currently, to make netconsole start over IPv6, the source address needs to be specified. Without a source address, netpoll_parse_options assumes we're setting up over IPv4 and the destination IPv6 address is rejected. Check if the IP version has been forced by a source address before checking for a version mismatch when parsing the destination address. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>