aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-25Linux 3.10.28v3.10.28Greg Kroah-Hartman
2014-01-25ARM: 7938/1: OMAP4/highbank: Flush L2 cache before disablingTaras Kondratiuk
commit b25f3e1c358434bf850220e04f28eebfc45eb634 upstream. Kexec disables outer cache before jumping to reboot code, but it doesn't flush it explicitly. Flush is done implicitly inside of l2x0_disable(). But some SoC's override default .disable handler and don't flush cache. This may lead to a corrupted memory during Kexec reboot on these platforms. This patch adds cache flush inside of OMAP4 and Highbank outer_cache.disable() handlers to make it consistent with default l2x0_disable(). Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init()Ville Syrjälä
commit 7ad228b11ec26a820291c9f5a1168d6176580dc1 upstream. When the pipe A force quirk is applied the code will attempt to grab a crtc mutex during intel_modeset_setup_hw_state(). If we're already holding all crtc mutexes this will obviously deadlock every time. So instead of using drm_modeset_lock_all() just grab the mode_config.mutex. This is enough to avoid the unlocked mutex warnings from certain lower level functions. The regression was introduced in: commit 027476642811f8559cbe00ef6cc54db230e48a20 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Dec 2 11:08:06 2013 +0200 drm/i915: Take modeset locks around intel_modeset_setup_hw_state() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add cc: stable since the offending commit has that, too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25serial: amba-pl011: use port lock to guard control register accessJon Medhurst
commit fe43390702a1b5741fdf217063b05c7612b38303 upstream. When the pl011 is being used for a console, pl011_console_write forces the control register (CR) to enable the UART for transmission and then restores this to the original value afterwards. It does this while holding the port lock. Unfortunately, when the uart is started or shutdown - say in response to userland using the serial device for a terminal - then this updates the control register without any locking. This means we can have pl011_console_write Save CR pl011_startup Initialise CR, e.g. enable receive pl011_console_write Restore old CR with receive not enabled this result is a serial port which doesn't respond to any input. A similar race in reverse could happen when the device is shutdown. We can fix these problems by taking the port lock when updating CR. Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUALGeert Uytterhoeven
commit f92f455f67fef27929e6043499414605b0c94872 upstream. {,set}page_address() are macros if WANT_PAGE_VIRTUAL. If !WANT_PAGE_VIRTUAL, they're plain C functions. If someone calls them with a void *, this pointer is auto-converted to struct page * if !WANT_PAGE_VIRTUAL, but causes a build failure on architectures using WANT_PAGE_VIRTUAL (arc, m68k and sparc64): drivers/md/bcache/bset.c: In function `__btree_sort': drivers/md/bcache/bset.c:1190: warning: dereferencing `void *' pointer drivers/md/bcache/bset.c:1190: error: request for member `virtual' in something not a structure or union Convert them to static inline functions to fix this. There are already plenty of users of struct page members inside <linux/mm.h>, so there's no reason to keep them as macros. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25md/raid5: Fix possible confusion when multiple write errors occur.NeilBrown
commit 1cc03eb93245e63b0b7a7832165efdc52e25b4e6 upstream. commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c md: raid5 crash during degradation Fixed a crash in an overly simplistic way which could leave R5_WriteError or R5_MadeGood set in the stripe cache for devices for which it is no longer relevant. When those devices are removed and spares added the flags are still set and can cause incorrect behaviour. commit 14a75d3e07c784c004b4b44b34af996b8e4ac453 md/raid5: preferentially read from replacement device if possible. Fixed the same bug if a more effective way, so we can now revert the original commit. Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25md/raid10: fix two bugs in handling of known-bad-blocks.NeilBrown
commit b50c259e25d9260b9108dc0c2964c26e5ecbe1c1 upstream. If we discover a bad block when reading we split the request and potentially read some of it from a different device. The code path of this has two bugs in RAID10. 1/ we get a spin_lock with _irq, but unlock without _irq!! 2/ The calculation of 'sectors_handled' is wrong, as can be clearly seen by comparison with raid1.c This leads to at least 2 warnings and a probable crash is a RAID10 ever had known bad blocks. Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25md/raid10: fix bug when raid10 recovery fails to recover a block.NeilBrown
commit e8b849158508565e0cd6bc80061124afc5879160 upstream. commit e875ecea266a543e643b19e44cf472f1412708f9 md/raid10 record bad blocks as needed during recovery. added code to the "cannot recover this block" path to record a bad block rather than fail the whole recovery. Unfortunately this new case was placed *after* r10bio was freed rather than *before*, yet it still uses r10bio. This is will crash with a null dereference. So move the freeing of r10bio down where it is safe. Fixes: e875ecea266a543e643b19e44cf472f1412708f9 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25md: fix problem when adding device to read-only array with bitmap.NeilBrown
commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 upstream. If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25drm/i915: fix DDI PLLs HW state readout codePaulo Zanoni
commit 0882dae983707455e97479e5e904e37673517ebc upstream. Properly zero the refcounts and crtc->ddi_pll_set so the previous HW state doesn't affect the result of reading the current HW state. This fixes WARNs about WRPLL refcount if we have an HDMI monitor on HSW and then suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64379 Tested-by: Qingshuai Tian <qingshuai.tian@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25nilfs2: fix segctor bug that causes file system corruptionAndreas Rohner
commit 70f2fe3a26248724d8a5019681a869abdaf3e89a upstream. There is a bug in the function nilfs_segctor_collect, which results in active data being written to a segment, that is marked as clean. It is possible, that this segment is selected for a later segment construction, whereby the old data is overwritten. The problem shows itself with the following kernel log message: nilfs_sufile_do_cancel_free: segment 6533 must be clean Usually a few hours later the file system gets corrupted: NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0 NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660) The issue can be reproduced with a file system that is nearly full and with the cleaner running, while some IO intensive task is running. Although it is quite hard to reproduce. This is what happens: 1. The cleaner starts the segment construction 2. nilfs_segctor_collect is called 3. sc_stage is on NILFS_ST_SUFILE and segments are freed 4. sc_stage is on NILFS_ST_DAT current segment is full 5. nilfs_segctor_extend_segments is called, which allocates a new segment 6. The new segment is one of the segments freed in step 3 7. nilfs_sufile_cancel_freev is called and produces an error message 8. Loop around and the collection starts again 9. sc_stage is on NILFS_ST_SUFILE and segments are freed including the newly allocated segment, which will contain active data and can be allocated at a later time 10. A few hours later another segment construction allocates the segment and causes file system corruption This can be prevented by simply reordering the statements. If nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments the freed segments are marked as dirty and cannot be allocated any more. Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25thp: fix copy_page_rep GPF by testing is_huge_zero_pmd once onlyHugh Dickins
commit eecc1e426d681351a6026a7d3e7d225f38955b6c upstream. We see General Protection Fault on RSI in copy_page_rep: that RSI is what you get from a NULL struct page pointer. RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10 RSP: 0000:ffff880136e15c00 EFLAGS: 00010286 RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200 RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000 RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001 R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0 Call Trace: copy_user_huge_page+0x93/0xab do_huge_pmd_wp_page+0x710/0x815 handle_mm_fault+0x15d8/0x1d70 __do_page_fault+0x14d/0x840 do_page_fault+0x2f/0x90 page_fault+0x22/0x30 do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but since shrink_huge_zero_page() can free the huge_zero_page, and we have no hold of our own on it here (except where the fourth test holds page_table_lock and has checked pmd_same), it's possible for it to answer yes the first time, but no to the second or third test. Change all those last three to tests for NULL page. (Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin in https://lkml.org/lkml/2013/3/29/103. I believe that one is due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same check will prevent a miscopy from being made visible.) Fixes: 97ae17497e99 ("thp: implement refcounting for huge zero page") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25ftrace/x86: Load ftrace_ops in parameter not the variable holding itSteven Rostedt
commit 1739f09e33d8f66bf48ddbc3eca615574da6c4f6 upstream. Function tracing callbacks expect to have the ftrace_ops that registered it passed to them, not the address of the variable that holds the ftrace_ops that registered it. Use a mov instead of a lea to store the ftrace_ops into the parameter of the function tracing callback. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20131113152004.459787f9@gandalf.local.home Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()Steven Rostedt
commit 3dc91d4338d698ce77832985f9cb183d8eeaf6be upstream. While running stress tests on adding and deleting ftrace instances I hit this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_inode_permission+0x85/0x160 PGD 63681067 PUD 7ddbe067 PMD 0 Oops: 0000 [#1] PREEMPT CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000 RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160 RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840 RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000 RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54 R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000 R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000 FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0 Call Trace: security_inode_permission+0x1c/0x30 __inode_permission+0x41/0xa0 inode_permission+0x18/0x50 link_path_walk+0x66/0x920 path_openat+0xa6/0x6c0 do_filp_open+0x43/0xa0 do_sys_open+0x146/0x240 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff RIP selinux_inode_permission+0x85/0x160 CR2: 0000000000000020 Investigating, I found that the inode->i_security was NULL, and the dereference of it caused the oops. in selinux_inode_permission(): isec = inode->i_security; rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd); Note, the crash came from stressing the deletion and reading of debugfs files. I was not able to recreate this via normal files. But I'm not sure they are safe. It may just be that the race window is much harder to hit. What seems to have happened (and what I have traced), is the file is being opened at the same time the file or directory is being deleted. As the dentry and inode locks are not held during the path walk, nor is the inodes ref counts being incremented, there is nothing saving these structures from being discarded except for an rcu_read_lock(). The rcu_read_lock() protects against freeing of the inode, but it does not protect freeing of the inode_security_struct. Now if the freeing of the i_security happens with a call_rcu(), and the i_security field of the inode is not changed (it gets freed as the inode gets freed) then there will be no issue here. (Linus Torvalds suggested not setting the field to NULL such that we do not need to check if it is NULL in the permission check). Note, this is a hack, but it fixes the problem at hand. A real fix is to restructure the destroy_inode() to call all the destructor handlers from the RCU callback. But that is a major job to do, and requires a lot of work. For now, we just band-aid this bug with this fix (it works), and work on a more maintainable solution in the future. Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25writeback: Fix data corruption on NFSJan Kara
commit f9b0e058cbd04ada76b13afffa7e1df830543c24 upstream. Commit 4f8ad655dbc8 "writeback: Refactor writeback_single_inode()" added a condition to skip clean inode. However this is wrong in WB_SYNC_ALL mode because there we also want to wait for outstanding writeback on possibly clean inode. This was causing occasional data corruption issues on NFS because it uses sync_inode() to make sure all outstanding writes are flushed to the server before truncating the inode and with sync_inode() returning prematurely file was sometimes extended back by an outstanding write after it was truncated. So modify the test to also check for pages under writeback in WB_SYNC_ALL mode. Fixes: 4f8ad655dbc82cf05d2edc11e66b78a42d38bf93 Reported-and-tested-by: Dan Duval <dan.duval@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25hwmon: (coretemp) Fix truncated name of alarm attributesJean Delvare
commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream. When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25vfs: In d_path don't call d_dname on a mount pointEric W. Biederman
commit f48cfddc6729ef133933062320039808bafa6f45 upstream. Aditya Kali (adityakali@google.com) wrote: > Commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > "proc: Fix the namespace inode permission checks." converted > the namespace files into symlinks. The same commit changed > the way namespace bind mounts appear in /proc/mounts: > $ mount --bind /proc/self/ns/ipc /mnt/ipc > Originally: > $ cat /proc/mounts | grep ipc > proc /mnt/ipc proc rw,nosuid,nodev,noexec 0 0 > > After commit bf056bfa80596a5d14b26b17276a56a0dcb080e5: > $ cat /proc/mounts | grep ipc > proc ipc:[4026531839] proc rw,nosuid,nodev,noexec 0 0 > > This breaks userspace which expects the 2nd field in > /proc/mounts to be a valid path. The symlink /proc/<pid>/ns/{ipc,mnt,net,pid,user,uts} point to dentries allocated with d_alloc_pseudo that we can mount, and that have interesting names printed out with d_dname. When these files are bind mounted /proc/mounts is not currently displaying the mount point correctly because d_dname is called instead of just displaying the path where the file is mounted. Solve this by adding an explicit check to distinguish mounted pseudo inodes and unmounted pseudo inodes. Unmounted pseudo inodes always use mount of their filesstem as the mnt_root in their path making these two cases easy to distinguish. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reported-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq()H Hartley Sweeten
commit 48108fe3daa0d142f9b97178fdb23704ea3a407b upstream. The dev->irq passed to request_irq() will always be 0 when the auto_attach function is called. The pcidev->irq should be used instead to get the correct irq number. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25staging: comedi: addi_apci_1032: fix subdevice type/flags bugH Hartley Sweeten
commit 90daf69a7a3f1d1a41018c799968a0bb896d65e0 upstream. The SDF_CMD_READ should be one of the s->subdev_flags not part of the s->type. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfullyJianguo Wu
commit a49ecbcd7b0d5a1cda7d60e03df402dd0ef76ac8 upstream. After a successful hugetlb page migration by soft offline, the source page will either be freed into hugepage_freelists or buddy(over-commit page). If page is in buddy, page_hstate(page) will be NULL. It will hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff81163761>] dequeue_hwpoisoned_huge_page+0x131/0x1d0 PGD c23762067 PUD c24be2067 PMD 0 Oops: 0000 [#1] SMP So check PageHuge(page) after call migrate_pages() successfully. [wujg: backport to 3.10: - adjust context] Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25GFS2: Increase i_writecount during gfs2_setattr_chownBob Peterson
commit 62e96cf81988101fe9e086b2877307b6adda5197 upstream. This patch calls get_write_access in function gfs2_setattr_chown, which merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. It also ensures that a multi-block reservation exists when needed for quota change operations during the chown. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10hRobert Richter
commit bee09ed91cacdbffdbcd3b05de8409c77ec9fcd6 upstream. On AMD family 10h we see following error messages while waking up from S3 for all non-boot CPUs leading to a failed IBS initialization: Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #1 process: Switch to broadcast mode on CPU1 CPU1 is up ... ACPI: Waking up from system sleep state S3 Reason for this is that during suspend the LVT offset for the IBS vector gets lost and needs to be reinialized while resuming. The offset is read from the IBSCTL msr. On family 10h the offset needs to be 1 as offset 0 is used for the MCE threshold interrupt, but firmware assings it for IBS to 0 too. The kernel needs to reprogram the vector. The msr is a readonly node msr, but a new value can be written via pci config space access. The reinitialization is implemented for family 10h in setup_ibs_ctl() which is forced during IBS setup. This patch fixes IBS setup after waking up from S3 by adding resume/supend hooks for the boot cpu which does the offset reinitialization. Marking it as stable to let distros pick up this fix. Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25perf scripting perl: Fix build error on Fedora 12Arnaldo Carvalho de Melo
commit 3b16ff89676d9902dc39976aee3cb0314ee37d93 upstream. Cast __u64 to u64 to silence this warning on older distros, such as Fedora 12: CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o cc1: warnings being treated as errors util/scripting-engines/trace-event-perl.c: In function ‘perl_process_tracepoint’: util/scripting-engines/trace-event-perl.c:285: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘__u64’ make[1]: *** [/tmp/build/perf/util/scripting-engines/trace-event-perl.o] Error 1 make: *** [install] Error 2 make: Leaving directory `/home/acme/git/linux/tools/perf' [acme@fedora12 linux]$ Reported-by: Waiman Long <Waiman.Long@hp.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Waiman Long <Waiman.Long@hp.com> Link: http://lkml.kernel.org/n/tip-nlxofdqcdjfm0w9o6bgq4kqv@git.kernel.org Link: http://lkml.kernel.org/r/1381265120-58532-1-git-send-email-Waiman.Long@hp.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25ARM: 7815/1: kexec: offline non panic CPUs on Kdump panicVijaya Kumar K
commit 4f9b4fb7a2091eec339413a460b1665758401828 upstream. In case of normal kexec kernel load, all cpu's are offlined before calling machine_kexec().But in case crash panic cpus are relaxed in machine_crash_nonpanic_core() SMP function but not offlined. When crash kernel is loaded with kexec and on panic trigger machine_kexec() checks for number of cpus online. If more than one cpu is online machine_kexec() fails to load with below error kexec: error: multiple CPUs still online In machine_crash_nonpanic_core() SMP function, offline CPU before cpu_relax Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: l00221744 <sdu.liu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15Linux 3.10.27v3.10.27Greg Kroah-Hartman
2014-01-15sched: Guarantee new group-entities always have weightPaul Turner
commit 0ac9b1c21874d2490331233b3242085f8151e166 upstream. Currently, group entity load-weights are initialized to zero. This admits some races with respect to the first time they are re-weighted in earlty use. ( Let g[x] denote the se for "g" on cpu "x". ) Suppose that we have root->a and that a enters a throttled state, immediately followed by a[0]->t1 (the only task running on cpu[0]) blocking: put_prev_task(group_cfs_rq(a[0]), t1) put_prev_entity(..., t1) check_cfs_rq_runtime(group_cfs_rq(a[0])) throttle_cfs_rq(group_cfs_rq(a[0])) Then, before unthrottling occurs, let a[0]->b[0]->t2 wake for the first time: enqueue_task_fair(rq[0], t2) enqueue_entity(group_cfs_rq(b[0]), t2) enqueue_entity_load_avg(group_cfs_rq(b[0]), t2) account_entity_enqueue(group_cfs_ra(b[0]), t2) update_cfs_shares(group_cfs_rq(b[0])) < skipped because b is part of a throttled hierarchy > enqueue_entity(group_cfs_rq(a[0]), b[0]) ... We now have b[0] enqueued, yet group_cfs_rq(a[0])->load.weight == 0 which violates invariants in several code-paths. Eliminate the possibility of this by initializing group entity weight. Signed-off-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016181627.22647.47543.stgit@sword-of-the-dawn.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sched: Fix hrtimer_cancel()/rq->lock deadlockBen Segall
commit 927b54fccbf04207ec92f669dce6806848cbec7d upstream. __start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock, waiting for the hrtimer to finish. However, if sched_cfs_period_timer runs for another loop iteration, the hrtimer can attempt to take rq->lock, resulting in deadlock. Fix this by ensuring that cfs_b->timer_active is cleared only if the _latest_ call to do_sched_cfs_period_timer is returning as idle. Then __start_cfs_bandwidth can just call hrtimer_try_to_cancel and wait for that to succeed or timer_active == 1. Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: pjt@google.com Link: http://lkml.kernel.org/r/20131016181622.22647.16643.stgit@sword-of-the-dawn.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sched: Fix cfs_bandwidth misuse of hrtimer_expires_remainingBen Segall
commit db06e78cc13d70f10877e0557becc88ab3ad2be8 upstream. hrtimer_expires_remaining does not take internal hrtimer locks and thus must be guarded against concurrent __hrtimer_start_range_ns (but returning HRTIMER_RESTART is safe). Use cfs_b->lock to make it safe. Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: pjt@google.com Link: http://lkml.kernel.org/r/20131016181617.22647.73829.stgit@sword-of-the-dawn.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15sched: Fix race on toggling cfs_bandwidth_usedBen Segall
commit 1ee14e6c8cddeeb8a490d7b54cd9016e4bb900b4 upstream. When we transition cfs_bandwidth_used to false, any currently throttled groups will incorrectly return false from cfs_rq_throttled. While tg_set_cfs_bandwidth will unthrottle them eventually, currently running code (including at least dequeue_task_fair and distribute_cfs_runtime) will cause errors. Fix this by turning off cfs_bandwidth_used only after unthrottling all cfs_rqs. Tested: toggle bandwidth back and forth on a loaded cgroup. Caused crashes in minutes without the patch, hasn't crashed with it. Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: pjt@google.com Link: http://lkml.kernel.org/r/20131016181611.22647.80365.stgit@sword-of-the-dawn.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15x86, fpu, amd: Clear exceptions in AMD FXSAVE workaroundLinus Torvalds
commit 26bef1318adc1b3a530ecc807ef99346db2aa8b0 upstream. Before we do an EMMS in the AMD FXSAVE information leak workaround we need to clear any pending exceptions, otherwise we trap with a floating-point exception inside this code. Reported-by: halfdog <me@halfdog.net> Tested-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helperDaniel Borkmann
commit 2690d97ade05c5325cbf7c72b94b90d265659886 upstream. Commit 5901b6be885e attempted to introduce IPv6 support into IRC NAT helper. By doing so, the following code seemed to be removed by accident: ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip); sprintf(buffer, "%u %u", ip, port); pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port); This leads to the fact that buffer[] was left uninitialized and contained some stack value. When we call nf_nat_mangle_tcp_packet(), we call strlen(buffer) on excatly this uninitialized buffer. If we are unlucky and the skb has enough tailroom, we overwrite resp. leak contents with values that sit on our stack into the packet and send that out to the receiver. Since the rather informal DCC spec [1] does not seem to specify IPv6 support right now, we log such occurences so that admins can act accordingly, and drop the packet. I've looked into XChat source, and IPv6 is not supported there: addresses are in u32 and print via %u format string. Therefore, restore old behaviour as in IPv4, use snprintf(). The IRC helper does not support IPv6 by now. By this, we can safely use strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer overflow. Also simplify some code as we now have ct variable anyway. [1] http://www.irchelp.org/irchelp/rfc/ctcpspec.html Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15SCSI: sd: Reduce buffer size for vpd requestBernd Schubert
commit af73623f5f10eb3832c87a169b28f7df040a875b upstream. Somehow older areca firmware versions have issues with scsi_get_vpd_page() and a large buffer, the firmware seems to crash and the scsi error-handler will start endless recovery retries. Limiting the buf-size to 64-bytes fixes this issue with older firmware versions (<1.49 for my controller). Fixes a regression with areca controllers and older firmware versions introduced by commit: 66c28f97120e8a621afd5aa7a31c4b85c547d33d Reported-by: Nix <nix@esperi.org.uk> Tested-by: Nix <nix@esperi.org.uk> Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.Dirk Brandewie
commit 6cbd7ee10e2842a3d1f9b60abede1c8f3d1f1130 upstream. KVM environments do not support APERF/MPERF MSRs. intel_pstate cannot operate without these registers. The previous validity checks in intel_pstate_msrs_not_valid() are insufficent in nested KVMs. References: https://bugzilla.redhat.com/show_bug.cgi?id=1046317 Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15mac80211: move "bufferable MMPDU" check to fix AP mode scanFelix Fietkau
commit 277d916fc2e959c3f106904116bb4f7b1148d47a upstream. The check needs to apply to both multicast and unicast packets, otherwise probe requests on AP mode scans are sent through the multicast buffer queue, which adds long delays (often longer than the scanning interval). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ACPI / Battery: Add a _BIX quirk for NEC LZ750/LSLan Tianyu
commit a90b40385735af0d3031f98e97b439e8944a31b3 upstream. The AML method _BIX of NEC LZ750/LS returns a broken package which skips the first member "Revision" (ACPI 5.0, Table 10-234). Add a quirk for this machine to skip member "Revision" during parsing the package returned by _BIX. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=67351 Reported-and-tested-by: Francisco Castro <fcr@adinet.com.uy> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ACPI / TPM: fix memory leak when walking ACPI namespaceJiang Liu
commit df45c712d1f4ef37714245fb75de726f4ca2bf8d upstream. In function ppi_callback(), memory allocated by acpi_get_name() will get leaked when current device isn't the desired TPM device, so fix the memory leak. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15mfd: rtsx_pcr: Disable interrupts before cancelling delayed worksThomas Gleixner
commit 73beb63d290f961c299526852884846b0d868840 upstream. This fixes a kernel panic when resuming from suspend to RAM. Without this fix an interrupt hits after the delayed work is canceled and thus requeues it. So we end up freeing an armed timer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: exynos5250: fix sysmmu_mfc{l,r} gate clocksAndrew Bresticker
commit 97c3557c3e0413efb1f021f582d1459760e22727 upstream. The gate clocks for the MFC sysmmus appear to be flipped, i.e. GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr. Fix this so that the MFC will start up. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clockAbhilash Kesavan
commit 2feed5aecf5f367b92bd6b6e92afe9e3de466907 upstream. The sysreg (system register) generates control signals for various blocks like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused clock at boot-up. This can lead to failures in operation of above blocks, because they can not be configured properly if this clock is disabled. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos4: Correct SRC_MFC registerSeung-Woo Kim
commit 5fdd1b56be51b1ec4dbde5b213d649ac717442da upstream. The SRC_MFC register offset was incorrect, which could cause have caused wrong calculation of rate of sclk_mfc clock, that could in turn lead to incorrect operation of MFC. This patch corrects it. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: clk-divider: fix divisor > 255 bugJames Hogan
commit 778037e1ccb75609846deca9e419449c1dc137fa upstream. Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ahci: add PCI ID for Marvell 88SE9170 SATA controllerSimon Guinot
commit e098f5cbe9d410e7878b50f524dce36cc83ec40e upstream. This patch adds support for the PCI ID provided by the Marvell 88SE9170 SATA controller. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15parisc: Ensure full cache coherency for kmap/kunmapJohn David Anglin
commit f8dae00684d678afa13041ef170cecfd1297ed40 upstream. Helge Deller noted a few weeks ago problems with the AIO support on parisc. This change is the result of numerous iterations on how best to deal with this problem. The solution adopted here is to provide full cache coherency in a uniform manner on all parisc systems. This involves calling flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on kunmap operations. As a result, the copy_user_page() and clear_user_page() functions can be removed and the overall code is simpler. The change ensures that both userspace and kernel aliases to a mapped page are invalidated and flushed. This is necessary for the correct operation of PA8800 and PA8900 based systems which do not support inequivalent aliases. With this change, I have observed no cache related issues on c8000 and rp3440. It is now possible for example to do kernel builds with "-j64" on four way systems. On systems using XFS file systems, the patch recently posted by Mikulas Patocka to "fix crash using XFS on loopback" is needed to avoid a hang caused by an uninitialized lock passed to flush_dcache_page() in the page struct. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15drm/nouveau/bios: make jump conditionalIlia Mirkin
commit 6d60792ec059d9f2139828f9f017679abb81aa73 upstream. This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943 Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: shmobile: mackerel: Fix coherent DMA maskLaurent Pinchart
commit b6328a6b7ba57fc84c38248f6f0e387e1170f1a8 upstream. Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: shmobile: armadillo: Fix coherent DMA maskLaurent Pinchart
commit dcd740b645003b866d7eb30d13d34d0729cce9db upstream. Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: shmobile: kzm9g: Fix coherent DMA maskLaurent Pinchart
commit 4f387323853c495ac589210832fad4503f75a0e7 upstream. Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: dts: exynos5250: Fix MDMA0 clock numberAbhilash Kesavan
commit 8777539479abd7b3efeb691685415dc2b057d0e0 upstream. Due to incorrect clock specified in MDMA0 node, using MDMA0 controller could cause system failures, due to wrong clock being controlled. This patch fixes this by specifying correct clock. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Corrected commit message and description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: fix "bad mode in ... handler" message for undefined instructionsRussell King
commit 29c350bf28da333e41e30497b649fe335712a2ab upstream. The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: fix footbridge clockevent deviceRussell King
commit 4ff859fe1dc0da0f87bbdfff78f527898878fa4a upstream. The clockevents code was being told that the footbridge clock event device ticks at 16x the rate which it actually does. This leads to timekeeping problems since it allows the clocksource to wrap before the kernel notices. Fix this by using the correct clock. Fixes: 4e8d76373c9fd ("ARM: footbridge: convert to clockevents/clocksource") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 04:39:07 +0000