aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-03Linux 2.6.38.8v2.6.38.8Greg Kroah-Hartman
2011-06-03AppArmor: fix oops in apparmor_setprocattrKees Cook
commit a5b2c5b2ad5853591a6cac6134cd0f599a720865 upstream. When invalid parameters are passed to apparmor_setprocattr a NULL deref oops occurs when it tries to record an audit message. This is because it is passing NULL for the profile parameter for aa_audit. But aa_audit now requires that the profile passed is not NULL. Fix this by passing the current profile on the task that is trying to setprocattr. Signed-off-by: Kees Cook <kees@ubuntu.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03ext4: Use schedule_timeout_interruptible() for waiting in lazyinit threadLukas Czerner
commit 4ed5c033c11b33149d993734a6a8de1016e8f03f upstream. In order to make lazyinit eat approx. 10% of io bandwidth at max, we are sleeping between zeroing each single inode table. For that purpose we are using timer which wakes up thread when it expires. It is set via add_timer() and this may cause troubles in the case that thread has been woken up earlier and in next iteration we call add_timer() on still running timer hence hitting BUG_ON in add_timer(). We could fix that by using mod_timer() instead however we can use schedule_timeout_interruptible() for waiting and hence simplifying things a lot. This commit exchange the old "waiting mechanism" with simple schedule_timeout_interruptible(), setting the time to sleep. Hence we do not longer need li_wait_daemon waiting queue and others, so get rid of it. Addresses-Red-Hat-Bugzilla: #699708 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03xen mmu: fix a race window causing leave_mm BUG()Tian, Kevin
commit 7899891c7d161752f29abcc9bc0a9c6c3a3af26c upstream. There's a race window in xen_drop_mm_ref, where remote cpu may exit dirty bitmap between the check on this cpu and the point where remote cpu handles drop request. So in drop_other_mm_ref we need check whether TLB state is still lazy before calling into leave_mm. This bug is rarely observed in earlier kernel, but exaggerated by the commit 831d52bc153971b70e64eccfbed2b232394f22f8 ("x86, mm: avoid possible bogus tlb entries by clearing prev mm_cpumask after switching mm") which clears bitmap after changing the TLB state. the call trace is as below: --------------------------------- kernel BUG at arch/x86/mm/tlb.c:61! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/xen_memory/xen_memory0/info/current_kb CPU 1 Modules linked in: 8021q garp xen_netback xen_blkback blktap blkback_pagemap nbd bridge stp llc autofs4 ipmi_devintf ipmi_si ipmi_msghandler lockd sunrpc bonding ipv6 xenfs dm_multipath video output sbs sbshc parport_pc lp parport ses enclosure snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device serio_raw bnx2 snd_pcm_oss snd_mixer_oss snd_pcm snd_timer iTCO_wdt snd soundcore snd_page_alloc i2c_i801 iTCO_vendor_support i2c_core pcs pkr pata_acpi ata_generic ata_piix shpchp mptsas mptscsih mptbase [last unloaded: freq_table] Pid: 25581, comm: khelper Not tainted 2.6.32.36fixxen #1 Tecal RH2285 RIP: e030:[<ffffffff8103a3cb>] [<ffffffff8103a3cb>] leave_mm+0x15/0x46 RSP: e02b:ffff88002805be48 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88015f8e2da0 RDX: ffff88002805be78 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88002805be48 R08: ffff88009d662000 R09: dead000000200200 R10: dead000000100100 R11: ffffffff814472b2 R12: ffff88009bfc1880 R13: ffff880028063020 R14: 00000000000004f6 R15: 0000000000000000 FS: 00007f62362d66e0(0000) GS:ffff880028058000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000003aabc11909 CR3: 000000009b8ca000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000000 00 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process khelper (pid: 25581, threadinfo ffff88007691e000, task ffff88009b92db40) Stack: ffff88002805be68 ffffffff8100e4ae 0000000000000001 ffff88009d733b88 <0> ffff88002805be98 ffffffff81087224 ffff88002805be78 ffff88002805be78 <0> ffff88015f808360 00000000000004f6 ffff88002805bea8 ffffffff81010108 Call Trace: <IRQ> [<ffffffff8100e4ae>] drop_other_mm_ref+0x2a/0x53 [<ffffffff81087224>] generic_smp_call_function_single_interrupt+0xd8/0xfc [<ffffffff81010108>] xen_call_function_single_interrupt+0x13/0x28 [<ffffffff810a936a>] handle_IRQ_event+0x66/0x120 [<ffffffff810aac5b>] handle_percpu_irq+0x41/0x6e [<ffffffff8128c1c0>] __xen_evtchn_do_upcall+0x1ab/0x27d [<ffffffff8128dd11>] xen_evtchn_do_upcall+0x33/0x46 [<ffffffff81013efe>] xen_do_hyper visor_callback+0x1e/0x30 <EOI> [<ffffffff814472b2>] ? _spin_unlock_irqrestore+0x15/0x17 [<ffffffff8100f8cf>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff81113f71>] ? flush_old_exec+0x3ac/0x500 [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef [<ffffffff8115115d>] ? load_elf_binary+0x398/0x17ef [<ffffffff81042fcf>] ? need_resched+0x23/0x2d [<ffffffff811f4648>] ? process_measurement+0xc0/0xd7 [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef [<ffffffff81113094>] ? search_binary_handler+0xc8/0x255 [<ffffffff81114362>] ? do_execve+0x1c3/0x29e [<ffffffff8101155d>] ? sys_execve+0x43/0x5d [<ffffffff8106fc45>] ? __call_usermodehelper+0x0/0x6f [<ffffffff81013e28>] ? kernel_execve+0x68/0xd0 [<ffffffff 8106fc45>] ? __call_usermodehelper+0x0/0x6f [<ffffffff8100f8cf>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8106fb64>] ? ____call_usermodehelper+0x113/0x11e [<ffffffff81013daa>] ? child_rip+0xa/0x20 [<ffffffff8106fc45>] ? __call_usermodehelper+0x0/0x6f [<ffffffff81012f91>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101371d>] ? retint_restore_args+0x5/0x6 [<ffffffff81013da0>] ? child_rip+0x0/0x20 Code: 41 5e 41 5f c9 c3 55 48 89 e5 0f 1f 44 00 00 e8 17 ff ff ff c9 c3 55 48 89 e5 0f 1f 44 00 00 65 8b 04 25 c8 55 01 00 ff c8 75 04 <0f> 0b eb fe 65 48 8b 34 25 c0 55 01 00 48 81 c6 b8 02 00 00 e8 RIP [<ffffffff8103a3cb>] leave_mm+0x15/0x46 RSP <ffff88002805be48> ---[ end trace ce9cee6832a9c503 ]--- Tested-by: Maoxiaoyun<tinnycloud@hotmail.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> [v1: Fleshed out the git description a bit] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03PCI: Add quirk for setting valid class for TI816X EndpointHemant Pedanekar
commit 63c4408074cbcc070ac17fc10e524800eb9bd0b0 upstream. TI816X (common name for DM816x/C6A816x/AM389x family) devices configured to boot as PCIe Endpoint have class code = 0. This makes kernel PCI bus code to skip allocating BARs to these devices resulting into following type of error when trying to enable them: "Device 0000:01:00.0 not available because of resource collisions" The device cannot be operated because of the above issue. This patch adds a ID specific (TI VENDOR ID and 816X DEVICE ID based) 'early' fixup quirk to replace class code with PCI_CLASS_MULTIMEDIA_VIDEO as class. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errorsTrond Myklebust
commit 444f72fe7e7b5f4db34cee933fa3546ebb8e9122 upstream. Currently, the call to nfs4_schedule_session_recovery() will actually just result in a test of the lease when what we really want is to force a session reset. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03NFSv4: Handle expired stateids when the lease is still validTrond Myklebust
commit 0ced63d1a245ac11241a5d37932e6d04d9c8040d upstream. Currently, if the server returns NFS4ERR_EXPIRED in reply to a READ or WRITE, but the RENEW test determines that the lease is still active, we fail to recover and end up looping forever in a READ/WRITE + RENEW death spiral. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...Trond Myklebust
commit fe19a96b10032035a35779f42ad59e35d6dd8ffd upstream. The TCP connection state code depends on the state_change() callback being called when the SYN_SENT state is set. However the networking layer doesn't actually call us back in that case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03drm/radeon/kms: add wait idle ioctl for eg->caymanDave Airlie
commit 97bfd0acd32e9639c9136e03955d574655d5cc2b upstream. None of the latest GPUs had this hooked up, this is necessary for correct operation in a lot of cases, however we should test this on a few GPUs in these families as we've had problems in this area before. Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when askedAlex Deucher
commit f25a5c63bfa017498c9adecb24d649ae96ba5c68 upstream. This needs to be explicitly set on btc. It's set by default on evergreen/fusion, so it fine to just unconditionally enable it for all chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03drm/i915: fix user irq miss in BSD ring on g4xBoqun Feng
commit 5bfa1063a775836a84f97e4df863fc36e1f856ad upstream. On g4x, user interrupt in BSD ring is missed. This is because though g4x and ironlake share the same bsd_ring, their interrupt control interfaces have _two_ differences. 1.different irq enable/disable functions: On g4x are i915_enable_irq and i915_disable_irq. On ironlake are ironlake_enable_irq and ironlake_disable_irq. 2.different irq flag: On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT. On ironlake is GT_BSD_USER_INTERRUPT Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq. ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq. So comes the irq miss on g4x. To fix this, as other rings' code do, conditionally call different functions(i915_enable/disable_irq and ironlake_enable/disable_irq) and use different interrupt flags in bsd_ring_get/put_irq. Signed-off-by: Boqun Feng <boqun.feng@intel.com> Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03brd: handle on-demand devices correctlyNamhyung Kim
commit af46566885a373b0a526932484cd8fef8de7b598 upstream. When finding or allocating a ram disk device, brd_probe() did not take partition numbers into account so that it can result to a different device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4 for simplicity) : $ sudo modprobe brd max_part=15 $ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 $ sudo mknod /dev/ram4 b 1 64 $ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256 256+0 records in 256+0 records out 1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s namhyung@leonhard:linux$ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 brw-r--r-- 1 root root 1, 64 2011-05-25 15:45 /dev/ram4 brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64 After this patch, /dev/ram4 - instead of /dev/ram64 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that RAMDISK_MAJOR can address. It does not need to be limited by partition numbers unless 'rd_nr' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03brd: limit 'max_part' module param to DISK_MAX_PARTSNamhyung Kim
commit 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 upstream. The 'max_part' parameter controls the number of maximum partition a brd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe brd max_part=100000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae PGD 7af1067 PUD 7b19067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: brd(+) Pid: 44, comm: insmod Tainted: G W 2.6.39-qemu+ #158 Bochs Bochs RIP: 0010:[<ffffffff81110a9a>] [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP: 0018:ffff880007b15d78 EFLAGS: 00000286 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063 FS: 0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980) Stack: ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a 0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000 Call Trace: [<ffffffff81143c0a>] kobject_add_internal+0xdf/0x1a0 [<ffffffff81143da1>] kobject_add_varg+0x41/0x50 [<ffffffff81143e6b>] kobject_add+0x64/0x66 [<ffffffff8113bbe7>] blk_register_queue+0x5f/0xb8 [<ffffffff81140f72>] add_disk+0xdf/0x289 [<ffffffffa00040df>] brd_init+0xdf/0x1aa [brd] [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffffa0004000>] ? 0xffffffffa0003fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff8108516c>] sys_init_module+0x9c/0x1dc [<ffffffff812ff4bb>] system_call_fastpath+0x16/0x1b Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30 8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89 RIP [<ffffffff81110a9a>] sysfs_create_dir+0x2d/0xae RSP <ffff880007b15d78> CR2: 0000000000000058 ---[ end trace aebb1175ce1f6739 ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03atm: expose ATM device index in sysfsDan Williams
commit e7a46b4d0839c2a3aa2e0ae0b145f293f6738498 upstream. It's currently exposed only through /proc which, besides requiring screen-scraping, doesn't allow userspace to distinguish between two identical ATM adapters with different ATM indexes. The ATM device index is required when using PPPoATM on a system with multiple ATM adapters. Signed-off-by: Dan Williams <dcbw@redhat.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03tmpfs: fix race between truncate and writepageHugh Dickins
commit 826267cf1e6c6899eda1325a19f1b1d15c558b20 upstream. While running fsx on tmpfs with a memhog then swapoff, swapoff was hanging (interruptibly), repeatedly failing to locate the owner of a 0xff entry in the swap_map. Although shmem_writepage() does abandon when it sees incoming page index is beyond eof, there was still a window in which shmem_truncate_range() could come in between writepage's dropping lock and updating swap_map, find the half-completed swap_map entry, and in trying to free it, leave it in a state that swap_shmem_alloc() could not correct. Arguably a bug in __swap_duplicate()'s and swap_entry_free()'s handling of the different cases, but easiest to fix by moving swap_shmem_alloc() under cover of the lock. More interesting than the bug: it's been there since 2.6.33, why could I not see it with earlier kernels? The mmotm of two weeks ago seems to have some magic for generating races, this is just one of three I found. With yesterday's git I first saw this in mainline, bisected in search of that magic, but the easy reproducibility evaporated. Oh well, fix the bug. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_areaWill Deacon
commit a248b13b21ae00b97638b4f435c8df3075808b5d upstream. The v6 and v7 implementations of flush_kern_dcache_area do not align the passed MVA to the size of a cacheline in the data cache. If a misaligned address is used, only a subset of the requested area will be flushed. This has been observed to cause failures in SMP boot where the secondary_data initialised by the primary CPU is not cacheline aligned, causing the secondary CPUs to read incorrect values for their pgd and stack pointers. This patch ensures that the base address is cacheline aligned before flushing the d-cache. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03dm table: reject devices without request fnsMilan Broz
commit f4808ca99a203f20b4475601748e44b25a65bdec upstream. This patch adds a check that a block device has a request function defined before it is used. Otherwise, misconfiguration can cause an oops. Because we are allowing devices with zero size e.g. an offline multipath device as in commit 2cd54d9bedb79a97f014e86c0da393416b264eb3 ("dm: allow offline devices") there needs to be an additional check to ensure devices are initialised. Some block devices, like a loop device without a backing file, exist but have no request function. Reproducer is trivial: dm-mirror on unbound loop device (no backing file on loop devices) dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0" and mirror resync will immediatelly cause OOps. BUG: unable to handle kernel NULL pointer dereference at (null) ? generic_make_request+0x2bd/0x590 ? kmem_cache_alloc+0xad/0x190 submit_bio+0x53/0xe0 ? bio_add_page+0x3b/0x50 dispatch_io+0x1ca/0x210 [dm_mod] ? read_callback+0x0/0xd0 [dm_mirror] dm_io+0xbb/0x290 [dm_mod] do_mirror+0x1e0/0x748 [dm_mirror] Signed-off-by: Milan Broz <mbroz@redhat.com> Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03idle governor: Avoid lock acquisition to read pm_qos before entering idleTim Chen
commit 333c5ae9948194428fe6c5ef5c088304fc98263b upstream. Thanks to the reviews and comments by Rafael, James, Mark and Andi. Here's version 2 of the patch incorporating your comments and also some update to my previous patch comments. I noticed that before entering idle state, the menu idle governor will look up the current pm_qos target value according to the list of qos requests received. This look up currently needs the acquisition of a lock to access the list of qos requests to find the qos target value, slowing down the entrance into idle state due to contention by multiple cpus to access this list. The contention is severe when there are a lot of cpus waking and going into idle. For example, for a simple workload that has 32 pair of processes ping ponging messages to each other, where 64 cpu cores are active in test system, I see the following profile with 37.82% of cpu cycles spent in contention of pm_qos_lock: - 37.82% swapper [kernel.kallsyms] [k] _raw_spin_lock_irqsave - _raw_spin_lock_irqsave - 95.65% pm_qos_request menu_select cpuidle_idle_call - cpu_idle 99.98% start_secondary A better approach will be to cache the updated pm_qos target value so reading it does not require lock acquisition as in the patch below. With this patch the contention for pm_qos_lock is removed and I saw a 2.2X increase in throughput for my message passing workload. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Acked-by: mark gross <markgross@thegnar.org> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03cpuidle: menu: fixed wrapping timers at 4.294 secondsTero Kristo
commit 7467571f4480b273007517b26297c07154c73924 upstream. Cpuidle menu governor is using u32 as a temporary datatype for storing nanosecond values which wrap around at 4.294 seconds. This causes errors in predicted sleep times resulting in higher than should be C state selection and increased power consumption. This also breaks cpuidle state residency statistics. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03i8k: Avoid lahf in 64-bit codeLuca Tettamanti
commit bc1f419c76a2d6450413ce4349f4e4a07be011d5 upstream. i8k uses lahf to read the flag register in 64-bit code; early x86-64 CPUs, however, lack this instruction and we get an invalid opcode exception at runtime. Use pushf to load the flag register into the stack instead. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Reported-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Cc: Massimo Dal Zotto <dz@debian.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03kbuild: Fix GNU make v3.80 compatibilityKevin Cernekee
commit 43f67c98161c65f1b2e3af3a9ce6741850072c06 upstream. According to Documentation/Changes, the kernel should be buildable with GNU make 3.80+. Commit 88d7be031f9f975bb3f50a0b5ef3796a671e7edf (kbuild: Use a single clean rule for kernel and external modules) introduced the "$(or" construct, which requires make 3.81. This causes "make clean" to malfunction when it is used with external modules. Replace "$(or" with an equivalent "$(if" expression, to restore backward compatibility. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03UBIFS: fix a rare memory leak in ro to rw remounting pathArtem Bityutskiy
commit eaeee242c531cd4b0a4a46e8b5dd7ef504380c42 upstream. When re-mounting from R/O mode to R/W mode and the LEB count in the superblock is not up-to date, because for the underlying UBI volume became larger, we re-write the superblock. We allocate RAM for these purposes, but never free it. So this is a memory leak, although very rare one. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03eCryptfs: Allow 2 scatterlist entries for encrypted filenamesTyler Hicks
commit 8d08dab786ad5cc2aca2bf870de370144b78c85a upstream. The buffers allocated while encrypting and decrypting long filenames can sometimes straddle two pages. In this situation, virt_to_scatterlist() will return -ENOMEM, causing the operation to fail and the user will get scary error messages in their logs: kernel: ecryptfs_write_tag_70_packet: Internal error whilst attempting to convert filename memory to scatterlist; expected rc = 1; got rc = [-12]. block_aligned_filename_size = [272] kernel: ecryptfs_encrypt_filename: Error attempting to generate tag 70 packet; rc = [-12] kernel: ecryptfs_encrypt_and_encode_filename: Error attempting to encrypt filename; rc = [-12] kernel: ecryptfs_lookup: Error attempting to encrypt and encode filename; rc = [-12] The solution is to allow up to 2 scatterlist entries to be used. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03p54usb: add zoom 4410 usbidChristian Lamparter
commit 9368a9a2378ab721f82f59430a135b4ce4ff5109 upstream. Reported-by: Mark Davis <marked86@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03sh: fixup fpu.o compile orderKuninori Morimoto
commit a375b15164dd9264f724ad941825e52c90145151 upstream. arch_ptrace() was modified to reference init_fpu() to fix up xstate initialization, which overlooked the fact that there are configurations that don't enable any of hard FPU support or emulation, resulting in build errors on DSP parts. Given that init_fpu() simply sets up the xstate slab cache and is side-stepped entirely for the DSP case, we can simply always build in the helper and fix up the references. Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03sh: clkfwk: fixup clk_rate_table_build parameter in div6 clockKuninori Morimoto
commit 52c10ad22b7e317960b4d411c9a9ddeaf3d5ae39 upstream. div6 clock should not use arch_flags for clk_rate_table_build, because SH_CLK_DIV6_EXT doesn't care .arch_flags. clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03cx88: hold device lock during sub-driver initializationJonathan Nieder
commit 1d6213ab995c61f7d1d81cf6cf876acf15d6e714 upstream. cx8802_blackbird_probe makes a device node for the mpeg sub-device before it has been added to dev->drvlist. If the device is opened during that time, the open succeeds but request_acquire cannot be called, so the reference count remains zero. Later, when the device is closed, the reference count becomes negative --- uh oh. Close the race by holding core->lock during probe and not releasing until the device is in drvlist and initialization finished. Previously the BKL prevented this race. Reported-by: Andreas Huber <hobrom@gmx.at> Tested-by: Andi Huber <hobrom@gmx.at> Tested-by: Marlon de Boer <marlon@hyves.nl> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03cx88: fix locking of sub-driver operationsJonathan Nieder
commit 1fe70e963028f34ba5e32488a7870ff4b410b19b upstream. The BKL conversion of this driver seems to have gone wrong. Loading the cx88-blackbird driver deadlocks. The cause: mpeg_ops::open in the cx2388x blackbird driver acquires the device lock and calls the sub-driver's request_acquire, which tries to acquire the lock again. Fix it by clarifying the semantics of request_acquire, request_release, advise_acquire, and advise_release: now all will rely on the caller to acquire the device lock. Based on work by Ben Hutchings <ben@decadent.org.uk>. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=31962 Reported-by: Andi Huber <hobrom@gmx.at> Tested-by: Andi Huber <hobrom@gmx.at> Tested-by: Marlon de Boer <marlon@hyves.nl> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03cx88: protect per-device driver list with device lockJonathan Nieder
commit 8a317a8760cfffa8185b56ff59fb4b6c58488d79 upstream. The BKL conversion of this driver seems to have gone wrong. Various uses of the sub-device and driver lists appear to be subject to race conditions. In particular, some functions access drvlist without a relevant lock held, which will race against removal of drivers. Let's start with that --- clean up by consistently protecting dev->drvlist with dev->core->lock, noting driver functions that require the device lock to be held or not to be held. After this patch, there are still some races --- e.g., cx8802_blackbird_remove can run between the time the blackbird driver is acquired and the time it is used in mpeg_release, and there's a similar race in cx88_dvb_bus_ctrl. Later patches will address the remaining known races and the deadlock noticed by Andi. This patch just makes the semantics clearer in preparation for those later changes. Based on work by Ben Hutchings <ben@decadent.org.uk>. Tested-by: Andi Huber <hobrom@gmx.at> Tested-by: Marlon de Boer <marlon@hyves.nl> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: remove remaining usages of hcd->state from usbcore and fix regressionAlan Stern
commit 69fff59de4d844f8b4c2454c3c23d32b69dcbfd7 upstream. This patch (as1467) removes the last usages of hcd->state from usbcore. We no longer check to see if an interrupt handler finds that a controller has died; instead we rely on host controller drivers to make an explicit call to usb_hc_died(). This fixes a regression introduced by commit 9b37596a2e860404503a3f2a6513db60c296bfdc (USB: move usbcore away from hcd->state). It used to be that when a controller shared an IRQ with another device and an interrupt arrived while hcd->state was set to HC_STATE_HALT, the interrupt handler would be skipped. The commit removed that test; as a result the current code doesn't skip calling the handler and ends up believing the controller has died, even though it's only temporarily stopped. The solution is to ignore HC_STATE_HALT following the handler's return. As a consequence of this change, several of the host controller drivers need to be modified. They can no longer implicitly rely on usbcore realizing that a controller has died because of hcd->state. The patch adds calls to usb_hc_died() in the appropriate places. The patch also changes a few of the interrupt handlers. They don't expect to be called when hcd->state is equal to HC_STATE_HALT, even if the controller is still alive. Early returns were added to avoid any confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Manuel Lauss <manuel.lauss@googlemail.com> CC: Rodolfo Giometti <giometti@linux.it> CC: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03OHCI: fix regression caused by nVidia shutdown workaroundAlan Stern
commit 2b7aaf503d56216b847c8265421d2a7d9b42df3e upstream. This patch (as1463) fixes a regression caused by commit 3df7169e73fc1d71a39cffeacc969f6840cdf52b (OHCI: work around for nVidia shutdown problem). The original problem encountered by people using NVIDIA chipsets was that USB devices were not turning off when the system shut down. For example, the LED on an optical mouse would remain on, draining a laptop's battery. The problem was caused by a bug in the chipset; an OHCI controller in the Reset state would continue to drive a bus reset signal even after system shutdown. The workaround was to put the controllers into the Suspend state instead. It turns out that later NVIDIA chipsets do not suffer from this bug. Instead some have the opposite bug: If a system is shut down while an OHCI controller is in the Suspend state, USB devices remain powered! On other systems, shutting down with a Suspended controller causes the system to reboot immediately. Thus, working around the original bug on some machines exposes other bugs on other machines. The best solution seems to be to limit the workaround to OHCI controllers with a low-numbered PCI product ID. I don't know exactly at what point NVIDIA changed their chipsets; the value used here is a guess. So far it was worked out okay for all the people who have tested it. This fixes Bugzilla #35032. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Yury Siamashka <yurand2@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: option: add support for Huawei E353 deviceMarcin Gałczyński
commit 610ba42f29c3dfa46a05ff8c2cadc29f544ff76d upstream. I am sharing patch to the devices/usb/serial/option.c. This allows operation of Huawei E353 broadband modem using the “option” driver. The patch simply adds new constant with proper product ID and an entry to usb_device_id. I worked on the 2.6.38.6 sources. Tested on Dell inspiron 1764 (i3 core cpu) and brand new Huawei E353 modem, Fedora 15 beta. Looking at the type of change, i doubt it has potential to introduce problems in other parts of kernel or the driver itself. Signed-off-by: Marcin Galczynski <marcin@galczynski.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03xhci: Fix memory leak bug when dropping endpointsSarah Sharp
commit 834cb0fc4712a3b21c6b8c5cb55bd13607191311 upstream. When the USB core wants to change to an alternate interface setting that doesn't include an active endpoint, or de-configuring the device, the xHCI driver needs to issue a Configure Endpoint command to tell the host to drop some endpoints from the schedule. After the command completes, the xHCI driver needs to free rings for any endpoints that were dropped. Unfortunately, the xHCI driver wasn't actually freeing the endpoint rings for dropped endpoints. The rings would be freed if the endpoint's information was simply changed (and a new ring was installed), but dropped endpoints never had their rings freed. This caused errors when the ring segment DMA pool was freed when the xHCI driver was unloaded: [ 5582.883995] xhci_hcd 0000:06:00.0: dma_pool_destroy xHCI ring segments, ffff88003371d000 busy [ 5582.884002] xhci_hcd 0000:06:00.0: dma_pool_destroy xHCI ring segments, ffff880033716000 busy [ 5582.884011] xhci_hcd 0000:06:00.0: dma_pool_destroy xHCI ring segments, ffff880033455000 busy [ 5582.884018] xhci_hcd 0000:06:00.0: Freed segment pool [ 5582.884026] xhci_hcd 0000:06:00.0: Freed device context pool [ 5582.884033] xhci_hcd 0000:06:00.0: Freed small stream array pool [ 5582.884038] xhci_hcd 0000:06:00.0: Freed medium stream array pool [ 5582.884048] xhci_hcd 0000:06:00.0: xhci_stop completed - status = 1 [ 5582.884061] xhci_hcd 0000:06:00.0: USB bus 3 deregistered [ 5582.884193] xhci_hcd 0000:06:00.0: PCI INT A disabled Fix this issue and free endpoint rings when their endpoints are successfully dropped. This patch should be backported to kernels as old as 2.6.31. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03xhci: Fix memory leak in ring cache deallocation.Sarah Sharp
commit 30f89ca021c3e584b61bc5a14eede89f74b2e826 upstream. When an endpoint ring is freed, it is either cached in a per-device ring cache, or simply freed if the ring cache is full. If the ring was added to the cache, then virt_dev->num_rings_cached is incremented. The cache is designed to hold up to 31 endpoint rings, in array indexes 0 to 30. When the device is freed (when the slot was disabled), xhci_free_virt_device() is called, it would free the cached rings in array indexes 0 to virt_dev->num_rings_cached. Unfortunately, the original code in xhci_free_or_cache_endpoint_ring() would put the first entry into the ring cache in array index 1, instead of array index 0. This was caused by the second assignment to rings_cached: rings_cached = virt_dev->num_rings_cached; if (rings_cached < XHCI_MAX_RINGS_CACHED) { virt_dev->num_rings_cached++; rings_cached = virt_dev->num_rings_cached; virt_dev->ring_cache[rings_cached] = virt_dev->eps[ep_index].ring; This meant that when the device was freed, cached rings with indexes 0 to N would be freed, and the last cached ring in index N+1 would not be freed. When the driver was unloaded, this caused interesting messages like: xhci_hcd 0000:06:00.0: dma_pool_destroy xHCI ring segments, ffff880063040000 busy This should be queued to stable kernels back to 2.6.33. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03xhci: Fix full speed bInterval encoding.Sarah Sharp
commit b513d44751bfb609a3c20463f764c8ce822d63e9 upstream. Dmitry's patch dfa49c4ad120a784ef1ff0717168aa79f55a483a USB: xhci - fix math in xhci_get_endpoint_interval() introduced a bug. The USB 2.0 spec says that full speed isochronous endpoints' bInterval must be decoded as an exponent to a power of two (e.g. interval = 2^(bInterval - 1)). Full speed interrupt endpoints, on the other hand, don't use exponents, and the interval in frames is encoded straight into bInterval. Dmitry's patch was supposed to fix up the full speed isochronous to parse bInterval as an exponent, but instead it changed the *interrupt* endpoint bInterval decoding. The isochronous endpoint encoding was the same. This caused full speed devices with interrupt endpoints (including mice, hubs, and USB to ethernet devices) to fail under NEC 0.96 xHCI host controllers: [ 100.909818] xhci_hcd 0000:06:00.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x99, new slot info = 0x38100000 [ 100.909821] xhci_hcd 0000:06:00.0: xhci_check_bandwidth called for udev ffff88011f0ea000 ... [ 100.910187] xhci_hcd 0000:06:00.0: ERROR: unexpected command completion code 0x11. [ 100.910190] xhci_hcd 0000:06:00.0: xhci_reset_bandwidth called for udev ffff88011f0ea000 When the interrupt endpoint was added and a Configure Endpoint command was issued to the host, the host controller would return a very odd error message (0x11 means "Slot Not Enabled", which isn't true because the slot was enabled). Probably the host controller was getting very confused with the bad encoding. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Dmitry Torokhov <dtor@vmware.com> Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com> Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03usb: gadget: rndis: don't test against req->lengthFelipe Balbi
commit 472b91274a6c6857877b5caddb875dcb5ecdfcb8 upstream. composite.c always sets req->length to zero and expects function driver's setup handlers to return the amount of bytes to be used on req->length. If we test against req->length w_length will always be greater than req->length thus making us always stall that particular SEND_ENCAPSULATED_COMMAND request. Tested against a Windows XP SP3. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03usb/gadget: at91sam9g20 fix end point max packet sizeJean-Christophe PLAGNIOL-VILLARD
commit bf1f0a05d472e33dda8e5e69525be1584cdbd03a upstream. on 9g20 they are the same as the 9260 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03xhci: Fix bug in control transfer cancellation.Sarah Sharp
commit 3abeca998a44205cfd837fa0bf1f7c24f8294acb upstream. When the xHCI driver attempts to cancel a transfer, it issues a Stop Endpoint command and waits for the host controller to indicate which TRB it was in the middle of processing. The host will put an event TRB with completion code COMP_STOP on the event ring if it stops on a control transfer TRB (or other types of transfer TRBs). The ring handling code is supposed to set ep->stopped_trb to the TRB that the host stopped on when this happens. Unfortunately, there is a long-standing bug in the control transfer completion code. It doesn't actually check to see if COMP_STOP is set before attempting to process the transfer based on which part of the control TD completed. So when we get an event on the data phase of the control TRB with COMP_STOP set, it thinks it's a normal completion of the transfer and doesn't set ep->stopped_td or ep->stopped_trb. When the ring handling code goes on to process the completion of the Stop Endpoint command, it sees that ep->stopped_trb is not a part of the TD it's trying to cancel. It thinks the hardware has its enqueue pointer somewhere further up in the ring, and thinks it's safe to turn the control TRBs into no-op TRBs. Since the hardware was in the middle of the control TRBs to be cancelled, the proper software behavior is to issue a Set TR dequeue pointer command. It turns out that the NEC host controllers can handle active TRBs being set to no-op TRBs after a stop endpoint command, but other host controllers have issues with this out-of-spec software behavior. Fix this behavior. This patch should be backported to kernels as far back as 2.6.31, but it may be a bit challenging, since process_ctrl_td() was introduced in some refactoring done in 2.6.36, and some endian-safe patches added in 2.6.40 that touch the same lines. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: cdc_acm: Fix oops when Droids MuIn LCD is connectedErik Slagter
commit fd5054c169d29747a44b4e1419ff47f57ae82dbc upstream. The Droids MuIn LCD operates like a serial remote terminal. Data received are displayed directly on the LCD. This patch fixes the kernel null pointer oops when it is plugged in. Add NO_DATA_INTERFACE quirk to tell the driver that "control" and "data" interfaces are not separated for this device, which prevents dereferencing a null pointer in the device probe code. Signed-off-by: Erik Slagter <erik@slagter.name> Signed-off-by: Maxin B. John <maxin.john@gmail.com> Tested-by: Erik Slagter <erik@slagter.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03Bind only modem AT command endpoint to option module.Marius B. Kotsbak
commit 15b2f3204a5c878c32939094775fb7349f707263 upstream. Network interface is handled by upcoming gt_b3730 module. Removed "GT-B3710" from comment, it is another modem with another USB ID. Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: gamin_gps: Fix for data transfer problems in native modeHermann Kneissel
commit b4026c4584cd70858d4d3450abfb1cd0714d4f32 upstream. This patch fixes a problem where data received from the gps is sometimes transferred incompletely to the serial port. If used in native mode now all data received via the bulk queue will be forwarded to the serial port. Signed-off-by: Hermann Kneissel <herkne@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: gadget: g_multi: fixed vendor and product ID in inf filesMichal Nazarewicz
commit 7701846fd52f86dffe50715e0e63154088b7c982 upstream. Commit 1c6529e92b "USB: gadget: g_multi: fixed vendor and product ID" replaced g_multi's vendor and product ID with proper ID's from Linux Foundation. This commit now updates INF files in the Documentation/usb directory which were omitted in the original commit. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: serial: ftdi_sio: adding support for TavIR STK500Benedek László
commit 37909fe588c9e09ab57cd267e98678a17ceda64a upstream. Adding support for the TavIR STK500 (id 0403:FA33) Atmel AVR programmer device based on FTDI FT232RL. Signed-off-by: Benedek László <benedekl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: moto_modem: Add USB identifier for the Motorola VE240.Elizabeth Jennifer Myers
commit 3938a0b32dc12229e76735679b37095bc2bc1578 upstream. Tested on my phone, the ttyUSB device is created and is fully functional. Signed-off-by: Elizabeth Jennifer Myers <elizabeth@sporksirc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03USB: CP210x Add 4 Device IDs for AC-Services DevicesCraig Shelley
commit 4eff0b40a7174896b860312910e0db51f2dcc567 upstream. This patch adds 4 device IDs for CP2102 based devices manufactured by AC-Services. See http://www.ac-services.eu for further info. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03i2c/writing-clients: Fix foo_driver.id_tableVikram Narayanan
commit 3116c86033079a1d4d4e84c40028f96b614843b8 upstream. The i2c_device_id structure variable's name is not used in the i2c_driver structure. Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03loop: handle on-demand devices correctlyNamhyung Kim
commit a1c15c59feee36267c43142a41152fbf7402afb6 upstream. When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03loop: limit 'max_part' module param to DISK_MAX_PARTSNamhyung Kim
commit 78f4bb367fd147a0e7e3998ba6e47109999d8814 upstream. The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03mm/page_alloc.c: prevent unending loop in __alloc_pages_slowpath()Andrew Barry
commit cfa54a0fcfc1017c6f122b6f21aaba36daa07f71 upstream. I believe I found a problem in __alloc_pages_slowpath, which allows a process to get stuck endlessly looping, even when lots of memory is available. Running an I/O and memory intensive stress-test I see a 0-order page allocation with __GFP_IO and __GFP_WAIT, running on a system with very little free memory. Right about the same time that the stress-test gets killed by the OOM-killer, the utility trying to allocate memory gets stuck in __alloc_pages_slowpath even though most of the systems memory was freed by the oom-kill of the stress-test. The utility ends up looping from the rebalance label down through the wait_iff_congested continiously. Because order=0, __alloc_pages_direct_compact skips the call to get_page_from_freelist. Because all of the reclaimable memory on the system has already been reclaimed, __alloc_pages_direct_reclaim skips the call to get_page_from_freelist. Since there is no __GFP_FS flag, the block with __alloc_pages_may_oom is skipped. The loop hits the wait_iff_congested, then jumps back to rebalance without ever trying to get_page_from_freelist. This loop repeats infinitely. The test case is pretty pathological. Running a mix of I/O stress-tests that do a lot of fork() and consume all of the system memory, I can pretty reliably hit this on 600 nodes, in about 12 hours. 32GB/node. Signed-off-by: Andrew Barry <abarry@cray.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Rik van Riel<riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03HID: magicmouse: ignore 'ivalid report id' while switching modesJiri Kosina
commit 23746a66d7d9e73402c68ef00d708796b97ebd72 upstream. The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022 Tested-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>