aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-26 Merge tag 'v4.4.124' into linux-linaro-lsk-v4.4lsk-v4.4-18.03Alex Shi
This is the 4.4.124 stable release
2018-03-24Linux 4.4.124Greg Kroah-Hartman
2018-03-24RDMA/ucma: Fix access to non-initialized CM_ID objectLeon Romanovsky
commit 7688f2c3bbf55e52388e37ac5d63ca471a7712e1 upstream. The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com> Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63Vignesh R
[ Upstream commit d087f15786021a9605b20f4c678312510be4cac1 ] Register layout of a typical TPCC_EVT_MUX_M_N register is such that the lowest numbered event is at the lowest byte address and highest numbered event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is different, in that the lowest numbered event is at the highest address and highest numbered event is at the lowest address. Therefore, modify ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register accordingly. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24clk: si5351: Rename internal plls to avoid name collisionsSergej Sawazki
[ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ] This drivers probe fails due to a clock name collision if a clock named 'plla' or 'pllb' is already registered when registering this drivers internal plls. Fix it by renaming internal plls to avoid name collisions. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Sergej Sawazki <sergej@taudac.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24nfsd4: permit layoutget of executable-only filesBenjamin Coddington
[ Upstream commit 66282ec1cf004c09083c29cb5e49019037937bbd ] Clients must be able to read a file in order to execute it, and for pNFS that means the client needs to be able to perform a LAYOUTGET on the file. This behavior for executable-only files was added for OPEN in commit a043226bc140 "nfsd4: permit read opens of executable-only files". This fixes up xfstests generic/126 on block/scsi layouts. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATSAnton Vasilyev
[ Upstream commit 744820869166c8c78be891240cf5f66e8a333694 ] Debugfs file reset_stats is created with S_IRUSR permissions, but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS, whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS. The patch fixes misstype with permissions. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ip6_vti: adjust vti mtu according to mtu of lower deviceAlexey Kodanev
[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iommu/vt-d: clean up pr_irq if request_threaded_irq failsJerry Snitselaar
[ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24pinctrl: Really force states during suspend/resumeFlorian Fainelli
[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ] In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing. In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state(). [Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function. Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24coresight: Fix disabling of CoreSight TPIURobert Walker
[ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ] The CoreSight TPIU should be disabled when tracing to other sinks to allow them to operate at full bandwidth. This patch fixes tpiu_disable_hw() to correctly disable the TPIU by configuring the TPIU to stop on flush, initiating a manual flush, waiting for the flush to complete and then waits for the TPIU to indicate it has stopped. Signed-off-by: Robert Walker <robert.walker@arm.com> Tested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24pty: cancel pty slave port buf's work in tty_releaseSahara
[ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24drm/omap: DMM: Check for DMM readiness after successful transaction commitPeter Ujfalusi
[ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ] Check the status of the DMM engine after it is reported that the transaction was completed as in rare cases the engine might not reached a working state. The wait_status() will print information in case the DMM is not reached the expected state and the dmm_txn_commit() will return with an error code to make sure that we are not continuing with a broken setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24vgacon: Set VGA struct resource typesBjorn Helgaas
[ Upstream commit c82084117f79bcae085e40da526253736a247120 ] Set the resource type when we reserve VGA-related I/O port resources. The resource code doesn't actually look at the type, so it inserts resources without a type in the tree correctly even without this change. But if we ever print a resource without a type, it looks like this: vga+ [??? 0x000003c0-0x000003df flags 0x0] Setting the type means it will be printed correctly as: vga+ [io 0x000003c0-0x000003df] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24IB/umem: Fix use of npages/nmap fieldsArtemy Kovalyov
[ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ] In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space') Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24RDMA/cma: Use correct size when writing netlink statsParav Pandit
[ Upstream commit 7baaa49af3716fb31877c61f59b74d029ce15b75 ] The code was using the src size when formatting the dst. They are almost certainly the same value but it reads wrong. Fixes: ce117ffac2e9 ("RDMA/cma: Export AF_IB statistics") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24IB/ipoib: Avoid memory leak if the SA returns a different DGIDErez Shitrit
[ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ] The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mmc: avoid removing non-removable hosts during suspendDaniel Drake
[ Upstream commit de8dcc3d2c0e08e5068ee1e26fc46415c15e3637 ] The Weibu F3C MiniPC has an onboard AP6255 module, presenting two SDIO functions on a single MMC host (Bluetooth/btsdio and WiFi/brcmfmac), and the mmc layer correctly detects this as non-removable. After suspend/resume, the wifi and bluetooth interfaces disappear and do not get probed again. The conditions here are: 1. During suspend, we reach mmc_pm_notify() 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can suspend the SDIO host. However, mmc_sdio_pre_suspend() returns -ENOSYS because btsdio_driver does not have a suspend method. 3. mmc_pm_notify() proceeds to remove the card 4. Upon resume, mmc_rescan() does nothing with this host, because of the rescan_entered check which aims to only scan a non-removable device a single time (i.e. during boot). Fix the loss of functionality by detecting that we are unable to suspend a non-removable host, so avoid the forced removal in that case. The comment above this function already indicates that this code was only intended for removable devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24platform/chrome: Use proper protocol transfer functionShawn Nematbakhsh
[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ] pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had one instance of these functions correct, but not the second, fall-back case. We use the fall-back only when the first command returns an IN_PROGRESS status, which is only used on some EC firmwares where we don't want to constantly poll the bus, but instead back off and sleep/retry for a little while. Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton") Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24cros_ec: fix nul-termination for firmware build infoArnd Bergmann
[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ] As gcc-8 reports, we zero out the wrong byte: drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version': drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds] This changes the code back to what it did before changing to a zero-length array structure. Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: [RESEND] media: dvb-frontends: Add delay to Si2168 restartRon Economos
[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: bt8xx: Fix err 'bt878_probe()'Christophe JAILLET
[ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.Tsang-Shian Lin
[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ] Reset the driver current tx read/write index to zero when inactiveps nic out of sync with HW state. Wrong driver tx read/write index will cause Tx fail. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()Geert Uytterhoeven
[ Upstream commit 302d6424e4a293a5761997e6c9fc3dfb1e4c355f ] With gcc-4.1.2: drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’: drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function Indeed, if nl_client is not found in any of the scanned has buckets, ret will be used uninitialized. Preinitialize ret to -EINVAL to fix this. Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24drm/msm: fix leak in failed get_pagesPrakash Kamliya
[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ] get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup. Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: c8sectpfe: fix potential NULL pointer dereference in ↵Gustavo A. R. Silva
c8sectpfe_timer_interrupt [ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ] _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24Bluetooth: hci_qca: Avoid setup failure on missing rampatchLoic Poulain
[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24perf tests kmod-path: Don't fail if compressed modules aren't supportedKim Phillips
[ Upstream commit 805b151a1afd24414706a7f6ae275fbb9649be74 ] __kmod_path__parse() uses is_supported_compression() to determine and parse out compressed module file extensions. On systems without zlib, this test fails and __kmod_path__parse() continues to strcmp "ko" with "gz". Don't do this on those systems. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 3c8a67f50a1e ("perf tools: Add kmod_path__parse function") Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVALMoritz Fischer
[ Upstream commit 538c08f4c89580fc644e2bc64e0a4b86c925da4e ] The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls through to the -EINVAL case. This is wrong since thew watchdog does actually get stopped or started correctly. Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticksMoritz Fischer
[ Upstream commit 453d0744f6c6ca3f9749b8c57c2e85b5b9f52514 ] The issue is that the internal counter that triggers the watchdog reset is actually running at 4096 Hz instead of 1Hz, therefore the value given by userland (in sec) needs to be multiplied by 4096 to get the correct behavior. Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support") Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24cifs: small underflow in cnvrtDosUnixTm()Dan Carpenter
[ Upstream commit 564277eceeca01e02b1ef3e141cfb939184601b4 ] January is month 1. There is no zero-th month. If someone passes a zero month then it means we read from one space before the start of the total_days_of_prev_months[] array. We may as well also be strict about days as well. Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24net: hns: fix ethtool_get_strings overflow in hns driverTimmy Li
[ Upstream commit 412b65d15a7f8a93794653968308fc100f2aa87c ] hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated is not enough for ethtool_get_strings(), which will cause random memory corruption. When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the the following can be observed without this patch: [ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80 [ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070. [ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70) [ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk [ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k [ 43.115218] Next obj: start=ffff801fb0b69098, len=80 [ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b. [ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38) [ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_ [ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai Signed-off-by: Timmy Li <lixiaoping3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24sm501fb: don't return zero on failure path in sm501fb_start()Alexey Khoroshilov
[ Upstream commit dc85e9a87420613b3129d5cc5ecd79c58351c546 ] If fbmem iomemory mapping failed, sm501fb_start() breaks off initialization, deallocates resources, but returns zero. As a result, double deallocation can happen in sm501fb_stop(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24video: fbdev: udlfb: Fix buffer on stackMaksim Salau
[ Upstream commit 45f580c42e5c125d55dbd8099750a1998de3d917 ] Allocate buffers on HEAP instead of STACK for local array that is to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24tcm_fileio: Prevent information leak for short readsDmitry Monakhov
[ Upstream commit f11b55d13563e9428c88c873f4f03a6bef11ec0a ] If we failed to read data from backing file (probably because some one truncate file under us), we must zerofill cmd's data, otherwise it will be returned as is. Most likely cmd's data are unitialized pages from page cache. This result in information leak. (Change BUG_ON into -EINVAL se_cmd failure - nab) testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ia64: fix module loading for gcc-5.4Sergei Trofimovich
[ Upstream commit a25fb8508c1b80dce742dbeaa4d75a1e9f2c5617 ] Starting from gcc-5.4+ gcc generates MLX instructions in more cases to refer local symbols: https://gcc.gnu.org/PR60465 That caused ia64 module loader to choke on such instructions: fuse: invalid slot number 1 for IMM64 The Linux kernel used to handle only case where relocation pointed to slot=2 instruction in the bundle. That limitation was fixed in linux by commit 9c184a073bfd ("[IA64] Fix 2.6 kernel for the new ia64 assembler") See http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433 This change lifts the slot=2 restriction from the kernel module loader. Tested on 'fuse' and 'btrfs' kernel modules. Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: H J Lu <hjl.tools@gmail.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Bug: https://bugs.gentoo.org/601014 Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24md/raid10: skip spare disk as 'first' diskShaohua Li
[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ] Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info. Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang <gqjiang@suse.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24Input: twl4030-pwrbutton - use correct device for irq requestSebastian Reichel
[ Upstream commit 3071e9dd6cd3f2290d770117330f2c8b2e9a97e4 ] The interrupt should be requested for the platform device and not for the input device. Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24power: supply: pda_power: move from timer to delayed_workMichael Trimarchi
[ Upstream commit 633e8799ddc09431be2744c4a1efdbda13af2b0b ] This changed is needed to avoid locking problem during boot as shown: <5>[ 8.824096] Registering SWP/SWPB emulation handler <6>[ 8.977294] clock: disabling unused clocks to save power <3>[ 9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269 <3>[ 9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 <4>[ 9.130249] 3 locks held by swapper/0/1: <4>[ 9.134613] #0: (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8 <4>[ 9.144500] #1: (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8 <4>[ 9.154357] #2: (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec <4>[ 9.163726] Backtrace: <4>[ 9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24) <4>[ 9.175811] r6:00203230 r5:0000010d r4:d782e000 r3:60000113 <4>[ 9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128) <4>[ 9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c) <4>[ 9.201660] r5:c02d5350 r4:d79a0c64 <4>[ 9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118) <4>[ 9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4) <4>[ 9.228027] r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000 <4>[ 9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48) <4>[ 9.243804] r5:d782e000 r4:c1767e94 <4>[ 9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8) <4>[ 9.257537] r4:c1767e94 r3:00000002 <4>[ 9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec) <4>[ 9.272033] r4:c1767eb0 r3:00000000 <4>[ 9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298) <4>[ 9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0) <4>[ 9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0) <4>[ 9.303680] r4:c1194e98 r3:c00bc778 <4>[ 9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68) <4>[ 9.316955] r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100 <4>[ 9.324310] r3:c026ba48 <4>[ 9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74) <4>[ 9.336456] Exception stack(0xd782fc08 to 0xd782fc50) <4>[ 9.342041] fc00: d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000 <4>[ 9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50 <4>[ 9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff Fixes: b2998049cfae ("[BATTERY] pda_power platform driver") Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24bnx2x: Align RX buffersScott Wood
[ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ] The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24drm/nouveau/kms: Increase max retries in scanout position queries.Mario Kleiner
[ Upstream commit 60b95d709525e3ce1c51e1fc93175dcd1755d345 ] So far we only allowed for 1 retry and just failed the query - and thereby high precision vblank timestamping - if we did not get a reasonable result, as such a failure wasn't considered all too horrible. There are a few NVidia gpu models out there which may need a bit more than 1 retry to get a successful query result under some conditions. Since Linux 4.4 the update code for vblank counter and timestamp in drm_update_vblank_count() changed so that the implementation assumes that high precision vblank timestamping of a kms driver either consistently succeeds or consistently fails for a given video mode and encoder/connector combo. Iow. switching from success to fail or vice versa on a modeset or connector change is ok, but spurious temporary failure for a given setup can confuse the core code and potentially cause bad miscounting of vblanks and confusion or hangs in userspace clients which rely on vblank stuff, e.g., desktop compositors. Therefore change the max retry count to a larger number - more than any gpu so far is known to need to succeed, but still low enough so that these queries which do also happen in vblank interrupt are still fast enough to be not disastrously long if something would go badly wrong with them. As such sporadic retries only happen seldom even on affected gpu's, this could mean a vblank irq could take a few dozen microseconds longer every few hours of uptime -- better than a desktop compositor randomly hanging every couple of hours or days of uptime in a hard to reproduce manner. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ACPI / PMIC: xpower: Fix power_table addressesHans de Goede
[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ] The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot). Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel. While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ipmi/watchdog: fix wdog hang on panic waiting for ipmi responseRobert Lippert
[ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ] Commit c49c097610fe ("ipmi: Don't call receive handler in the panic context") means that the panic_recv_free is not called during a panic and the atomic count does not drop to 0. Fix this by only expecting one decrement of the atomic variable which comes from panic_smi_free. Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUPKishon Vijay Abraham I
[ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ] The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC mode. However in EP mode, the host system is not able to access the MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046ayangbo lu
[ Upstream commit a627f025eb0534052ff451427c16750b3530634c ] The ls1046a datasheet specified that the max SD clock frequency for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet specified it's 125MHz for ls1012a. So this patch is to add the limitation. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24staging: wilc1000: fix unchecked return valuePan Bian
[ Upstream commit 9e96652756ad647b7bcc03cb99ffc9756d7b5f93 ] Function dev_alloc_skb() will return a NULL pointer if there is no enough memory. However, in function WILC_WFI_mon_xmit(), its return value is used without validation. This may result in a bad memory access bug. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK ↵Sameer Wadgaonkar
set to y [ Upstream commit 3c2bf0bd08123f3497bd3e84bd9088c937b0cb40 ] The root issue is that we are not allowed to have items on the stack being passed to "DMA" like operations. In this case we have a vmcall and an inline completion of scsi command. This patch fixes the issue by moving the variables on stack in do_scsi_nolinuxstat() to heap memory. Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Signed-off-by: David Kershner <david.kershner@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mtip32xx: use runtime tag to initialize command headerMing Lei
[ Upstream commit a4e84aae8139aca9fbfbced1f45c51ca81b57488 ] mtip32xx supposes that 'request_idx' passed to .init_request() is tag of the request, and use that as request's tag to initialize command header. After MQ IO scheduler is in, request tag assigned isn't same with the request index anymore, so cause strange hardware failure on mtip32xx, even whole system panic is triggered. This patch fixes the issue by initializing command header via request's real tag. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mfd: palmas: Reset the POWERHOLD mux during power offKeerthy
[ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ] POWERHOLD signal has higher priority over the DEV_ON bit. So power off will not happen if the POWERHOLD is held high. Hence reset the MUX to GPIO_7 mode to release the POWERHOLD and the DEV_ON bit to take effect to power off the PMIC. PMIC Power off happens in dire situations like thermal shutdown so irrespective of the POWERHOLD setting go ahead and turn off the powerhold. Currently poweroff is broken on boards that have powerhold enabled. This fixes poweroff on those boards. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mac80211: don't parse encrypted management frames in ieee80211_frame_ackedEmmanuel Grumbach
[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ] ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>