AgeCommit message (Collapse)Author
2011-12-05igb: Update DMA Coalescing threshold calculation.Matthew Vick
This patch updates the DMA Coalescing feature parameters to account for larger MTUs. Previously, sufficient space may not have been allocated in the receive buffer, causing packet drop. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05e1000e: hitting BUG_ON() from napi_enableBruce Allan
Based on a patch from Mike McElroy created against the out-of-tree e1000e driver: Hitting the BUG_ON in napi_enable(). Code inspection shows that this can only be triggered by calling napi_enable() twice without an intervening napi_disable(). I saw the following sequence of events in the stack trace: 1) We simulated a cable pull using an Extreme switch. 2) e1000_tx_timeout() was entered. 3) e1000_reset_task() was called. Saw the message from e_err() in the console log. 4) e1000_reinit_locked was called. This function calls e1000_down() and e1000_up(). These functions call napi_disable() and napi_enable() respectively. 5) Then on another thread, a monitor task saw carrier was down and executed 'ip set link down' and 'ip set link up' commands. 6) Saw the '_E1000_RESETTING'warning fron the e1000_close function. 7) Either the e1000_open() executed between the e1000_down() and e1000_up() calls in step 4 or the e1000_open() call executed after the e1000_up() call. In either case, napi_enable() is called twice which triggers the BUG_ON. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Mike McElroy <mike.mcelroy@stratus.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-05e1000e: Avoid wrong check on TX hangJeff Kirsher
Based on the original patch submitted my Michael Wang <wangyun@linux.vnet.ibm.com>. Descriptors may not be write-back while checking TX hang with flag FLAG2_DMA_BURST on. So when we detect hang, we just flush the descriptor and detect again for once. -v2 change 1 to true and 0 to false and remove extra () CC: Michael Wang <wangyun@linux.vnet.ibm.com> CC: Flavio Leitner <fbl@redhat.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-12-02atm: clip: Remove code commented out since eternity.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-02forcedeath: Fix bql support for forcedeathIgor Maravic
Moved netdev_completed_queue() out of while loop in function nv_tx_done_optimized(). Because this function was in while loop, BUG_ON(count > dql->num_queued - dql->num_completed) was hit in dql_completed(). Signed-off-by: Igor Maravic <igorm@etf.rs> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02niu: Fix typo in comment.David S. Miller
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS ipv4: flush route cache after change accept_local sch_red: fix red_change Revert "udp: remove redundant variable" bridge: master device stuck in no-carrier state forever when in user-stp mode ipv4: Perform peer validation on cached route lookup. net/core: fix rollback handler in register_netdevice_notifier sch_red: fix red_calc_qavg_from_idle_time bonding: only use primary address for ARP ipv4: fix lockdep splat in rt_cache_seq_show sch_teql: fix lockdep splat net: fec: Select the FEC driver by default for i.MX SoCs isdn: avoid copying too long drvid isdn: make sure strings are null terminated netlabel: Fix build problems when IPv6 is not enabled sctp: better integer overflow check in sctp_auth_create_key() sctp: integer overflow in sctp_auth_create_key() ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. net: Fix corruption in /proc/*/net/dev_mcast mac80211: fix race between the AGG SM and the Tx data path ...
2011-12-01netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NSDavid S. Miller
firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01niu: Add support for byte queue limits.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01niu: Remove redundant PHY ID test.David S. Miller
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01ipv4: flush route cache after change accept_localPeter Pan(潘卫平)
After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01sch_red: fix red_changeEric Dumazet
Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01Linux 3.2-rc4v3.2-rc4Linus Torvalds
2011-12-01Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits) ocfs2: avoid unaligned access to dqc_bitmap ocfs2: Use filemap_write_and_wait() instead of write_inode_now() ocfs2: honor O_(D)SYNC flag in fallocate ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 ocfs2: send correct UUID to cleancache initialization ocfs2: Commit transactions in error cases -v2 ocfs2: make direntry invalid when deleting it fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free ocfs2: Avoid livelock in ocfs2_readpage() ocfs2: serialize unaligned aio ocfs2: Implement llseek() ocfs2: Fix ocfs2_page_mkwrite() ocfs2: Add comment about orphan scanning ocfs2: Clean up messages in the fs ocfs2/cluster: Cluster up now includes network connections too ocfs2/cluster: Add new function o2net_fill_node_map() ocfs2/cluster: Fix output in file elapsed_time_in_ms ocfs2/dlm: dlmlock_remote() needs to account for remastery ocfs2/dlm: Take inflight reference count for remotely mastered resources too ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() ...
2011-12-01ocfs2: avoid unaligned access to dqc_bitmapAkinobu Mita
The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned, but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(), ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These are wrapper macros for ext2_*_bit() which need to take an unsigned long aligned address (though some architectures are able to handle unaligned address correctly) So some 64bit architectures may not be able to access the dqc_bitmap correctly. This avoids such unaligned access by using another wrapper functions for ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to handle unaligned bitmap access. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-12-01Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-12-01dccp: Fix compile warning in probe code.David S. Miller
Commit 1386be55e32a3c5d8ef4a2b243c530a7b664c02c ("dccp: fix auto-loading of dccp(_probe)") fixed a bug but created a new compiler warning: net/dccp/probe.c: In function ‘dccpprobe_init’: net/dccp/probe.c:166:2: warning: the omitted middle operand in ?: will always be ‘true’, suggest explicit middle operand [-Wparentheses] try_then_request_module() is built for situations where the "existence" test is some lookup function that returns a non-NULL object on success, and with a reference count of some kind held. Here we're looking for a success return of zero from the jprobe registry. Instead of fighting the way try_then_request_module() works, simply open code what we want to happen in a local helper function. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01net: Make ndo_neigh_destroy return void.David S. Miller
The return value isn't used. Suggested by Ben Hucthings. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01Revert "udp: remove redundant variable"David S. Miller
This reverts commit 81d54ec8479a2c695760da81f05b5a9fb2dbe40a. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: paul bilke <fsmail@conspiracy.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01bridge: master device stuck in no-carrier state forever when in user-stp modeVitalii Demianets
When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01ipv4: Perform peer validation on cached route lookup.David S. Miller
Otherwise we won't notice the peer GENID change. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01ipv4: use a 64bit load/store in output pathEric Dumazet
gcc compiler is smart enough to use a single load/store if we memcpy(dptr, sptr, 8) on x86_64, regardless of CONFIG_CC_OPTIMIZE_FOR_SIZE In IP header, daddr immediately follows saddr, this wont change in the future. We only need to make sure our flowi4 (saddr,daddr) fields wont break the rule. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01dccp: Evaluate ip_hdr() only once in dccp_v4_route_skb().David S. Miller
This also works around a bogus gcc warning generated by an upcoming patch from Eric Dumazet that rearranges the layout of struct flowi4. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01powerpc: tqm8548/tqm8xx: add and update CAN device nodesWolfgang Grandegger
This patch enables or updates support for the CC770 and AN82527 CAN controller on the TQM8548 and TQM8xx boards. CC: devicetree-discuss@lists.ozlabs.org CC: linuxppc-dev@ozlabs.org CC: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add platform bus driver for the CC770 and AN82527Wolfgang Grandegger
This driver works with both, static platform data and device tree bindings. It has been tested on a TQM855L board with two AN82527 CAN controllers on the local bus. CC: Devicetree-discuss@lists.ozlabs.org CC: linuxppc-dev@ozlabs.org CC: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add legacy ISA bus driver for the CC770 and AN82527Wolfgang Grandegger
This patch adds support for legacy Bosch CC770 and Intel AN82527 CAN controllers on the ISA or PC-104 bus. The I/O port or memory address and the IRQ number must be specified via module parameters: insmod cc770_isa.ko port=0x310,0x380 irq=7,11 for ISA devices using I/O ports or: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 for memory mapped ISA devices. Indirect access via address and data port is supported as well: insmod cc770_isa.ko port=0x310,0x380 indirect=1 irq=7,11 Furthermore, the following mode parameter can be defined: clk: External oscillator clock frequency (default=16000000 [16 MHz]) cir: CPU interface register (default=0x40 [DSC]) bcr: Bus configuration register (default=0x40 [CBY]) cor: Clockout register (default=0x00) Note: for clk, cir, bcr and cor, the first argument re-defines the default for all other devices, e.g.: insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000 is equivalent to insmod cc770_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000,24000000 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01can: cc770: add driver core for the Bosch CC770 and Intel AN82527Wolfgang Grandegger
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01icplus: mdio_write(), remove unnecessary for loopPatrick Kelle
At this point the variable j is always set to 7 and the code within the loop has to run only once anyway. As suggested by David Miller: "You can simply this even further since p[7] is what is used here, and this means len is one, the inner loop therefore executes only once, and the p[7].field value is not used (it's zero in the table) and the write to it is completely thrown away." Signed-off-by: Patrick Kelle <patrick.kelle81@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01net: net_device flags is an unsigned intEric Dumazet
commit b00055aacdb ([NET] core: add RFC2863 operstate) changed net_device flags from unsigned short to unsigned int. Some core functions still assume its an unsigned short. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01dsa: Include linux/if_ether.h to fix build errorAxel Lin
Include linux/if_ether.h to fix below build errors: CC arch/arm/mach-kirkwood/common.o In file included from arch/arm/mach-kirkwood/common.c:19: include/net/dsa.h: In function 'dsa_uses_dsa_tags': include/net/dsa.h:192: error: 'ETH_P_DSA' undeclared (first use in this function) include/net/dsa.h:192: error: (Each undeclared identifier is reported only once include/net/dsa.h:192: error: for each function it appears in.) include/net/dsa.h: In function 'dsa_uses_trailer_tags': include/net/dsa.h:197: error: 'ETH_P_TRAILER' undeclared (first use in this function) make[1]: *** [arch/arm/mach-kirkwood/common.o] Error 1 make: *** [arch/arm/mach-kirkwood] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01netem: fix build error on 32bit archesEric Dumazet
ERROR: "__udivdi3" [net/sched/sch_netem.ko] undefined! Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix meta data raid-repair merge problem Btrfs: skip allocation attempt from empty cluster Btrfs: skip block groups without enough space for a cluster Btrfs: start search for new cluster at the beginning Btrfs: reset cluster's max_size when creating bitmap Btrfs: initialize new bitmaps' list Btrfs: fix oops when calling statfs on readonly device Btrfs: Don't error on resizing FS to same size Btrfs: fix deadlock on metadata reservation when evicting a inode Fix URL of btrfs-progs git repository in docs btrfs scrub: handle -ENOMEM from init_ipath()
2011-12-01Btrfs: fix meta data raid-repair merge problemJan Schmidt
Commit 4a54c8c16 introduced raid-repair, killing the individual readpage_io_failed_hook entries from inode.c and disk-io.c. Commit 4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to disk-io.c. The raid-repair commit had logic to disable raid-repair, if readpage_io_failed_hook is set. Thus, the readahead commit effectively disabled raid-repair for meta data. This commit changes the logic to always attempt raid-repair when needed and call the readpage_io_failed_hook in case raid-repair fails. This is much more straight forward and should have been like that from the beginning. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Reported-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-30net/core: fix rollback handler in register_netdevice_notifierRongQing.Li
Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30caif: Remove unused attributes from struct cflayersjur.brandeland@stericsson.com
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30caif: Remove unused enum and parameter in cfserlsjur.brandeland@stericsson.com
Remove unused enum cfcnfg_phy_type and the parameter to cfserl_create. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30caif: Restructure how link caif link layer enrollsjur.brandeland@stericsson.com
Enrolling CAIF link layers are refactored. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30caif: Allow cfpkt_extr_head to process empty messagesjur.brandeland@stericsson.com
Allow NULL pointer in cfpkt_extr_head in order to skip past header data. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30sch_red: fix red_calc_qavg_from_idle_timeEric Dumazet
Since commit a4a710c4a7490587 (pkt_sched: Change PSCHED_SHIFT from 10 to 6) it seems RED/GRED are broken. red_calc_qavg_from_idle_time() computes a delay in us units, but this delay is now 16 times bigger than real delay, so the final qavg result smaller than expected. Use standard kernel time services since there is no need to obfuscate them. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30netem: rate extensionHagen Paul Pfeifer
Currently netem is not in the ability to emulate channel bandwidth. Only static delay (and optional random jitter) can be configured. To emulate the channel rate the token bucket filter (sch_tbf) can be used. But TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot be 0. Also the idea behind TBF is that the credit (token in buckets) fills if no packet is transmitted. So that there is always a "positive" credit for new packets. In real life this behavior contradicts the law of nature where nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0 seconds. Netem is an excellent place to implement a rate limiting feature: static delay is already implemented, tfifo already has time information and the user can skip TBF configuration completely. This patch implement rate feature which can be configured via tc. e.g: tc qdisc add dev eth0 root netem rate 10kbit To emulate a link of 5000byte/s and add an additional static delay of 10ms: tc qdisc add dev eth0 root netem delay 10ms rate 5KBps Note: similar to TBF the rate extension is bounded to the kernel timing system. Depending on the architecture timer granularity, higher rates (e.g. 10mbit/s and higher) tend to transmission bursts. Also note: further queues living in network adaptors; see ethtool(8). Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30ipv6 : mcast : Delete useless parameter in ip6_mc_add1_src()Jun Zhao
Need not to used 'delta' flag when add single-source to interface filter source list. Signed-off-by: Jun Zhao <mypopydev@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30ipv4 : igmp : Delete useless parameter in ip_mc_add1_src()Jun Zhao
Need not to used 'delta' flag when add single-source to interface filter source list. Signed-off-by: Jun Zhao <mypopydev@gmail.com> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30bonding: only use primary address for ARPHenrik Saavedra Persson
Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson <henrik.e.persson@ericsson.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Fix RCU lockdep splats IB/ipoib: Prevent hung task or softlockup processing multicast response IB/qib: Fix over-scheduling of QSFP work RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2 RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic IB/qib: Don't use schedule_work()
2011-11-30Merge branch 'dt-for-linus' of git://sources.calxeda.com/kernel/linuxLinus Torvalds
* 'dt-for-linus' of git://sources.calxeda.com/kernel/linux: of: Add Silicon Image vendor prefix of/irq: of_irq_init: add check for parent equal to child node
2011-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: twl: fix twl4030 support for smps regulators regulator: fix use after free bug regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator
2011-11-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: ux500: update defconfig ARM: u300: update defconfig ARM: at91: enable additional boards in existing soc defconfig files ARM: at91: refresh soc defconfig files for 3.2 ARM: at91: rename defconfig files appropriately ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module ARM: OMAP2+: Remove empty io.h ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined ARM: OMAP: smartreflex: fix IRQ handling bug ARM: OMAP: PM: only register TWL with voltage layer when device is present ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs arm: mx28: fix bit operation in clock setting ARM: imx: export imx_ioremap ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code ARM: mx5: Fix checkpatch warnings in cpu-imx5.c MAINTAINERS: Add missing directory ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' ARM: imx6q: move clock register map to machine_desc.map_io ARM: pxa168/gplugd: add the correct SSP device ARM: Update mach-types to fix mxs build breakage ...
2011-11-30ARM: 7182/1: ARM cpu topology: fix warningVincent Guittot
kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-30ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and belowJon Medhurst (Tixy)
The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Tested-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>