aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-21sched: use the idle cpu in interruptingidle-steal-from-intAlex Shi
Use the interrupting idle cpu instead of the shallowest one could save cpu power. After send a task to the idle cpu, the cpu isn't idle, so after the irq, it won't enter into cpu idle again, instead the cpu exit from cpu idle and try to wakeup task in the rq. But need to measure the latency change, since the shallowest idle cpu's wakeup time could compete with interrupt job.
2016-03-13Linux 4.5Linus Torvalds
2016-03-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.5: - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780 - Fix build with DEBUG_ZBOOT and MACH_JZ4780 - Fix issue with uninitialised temp_foreign_map - Fix awk regex compile failure with certain versions of awk. At this time, the sole user, ld-ifversion, is only used on MIPS" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: smp.c: Fix uninitialised temp_foreign_map MIPS: Fix build error when SMP is used without GIC ld-version: Fix awk regex compile failure MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
2016-03-13MIPS: smp.c: Fix uninitialised temp_foreign_mapJames Hogan
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map cpumask it uses the local variable temp_foreign_map without initialising it to zero. Since the calculation only ever sets bits in this cpumask any existing bits at that memory location will remain set and find their way into cpu_foreign_map too. This could potentially lead to cache operations suboptimally doing smp calls to multiple VPEs in the same core, even though the VPEs share primary caches. Therefore initialise temp_foreign_map using cpumask_clear() before use. Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-13MIPS: Fix build error when SMP is used without GICHauke Mehrtens
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also selected, otherwise it results in a compile error. smp-gic.c uses some functions from include/linux/irqchip/mips-gic.h like plat_ipi_call_int_xlate() which are only added to the header file when MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP. The calls top the functions from smp-gic.c are already protected by some #ifdefs The first part of this was introduced in commit 72e20142b2bf ("MIPS: Move GIC IPI functions out of smp-cmp.c") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12774/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-13ld-version: Fix awk regex compile failureJames Hogan
The ld-version.sh script fails on some versions of awk with the following error, resulting in build failures for MIPS: awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(') This is due to the regular expression ".*)", meant to strip off the beginning of the ld version string up to the close bracket, however brackets have a meaning in regular expressions, so lets escape it so that awk doesn't expect a corresponding open bracket. Fixes: ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion ...") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Michal Marek <mmarek@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/12838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-13MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780Aaro Koskinen
Ingenic SoC declares ZBOOT support, but debug definitions are missing for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set. The UART addresses are same as with JZ4740, so fix by covering JZ4780 with those as well. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12830/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-12Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block merge fix from Jens Axboe. This fixes the block segment counting bug and resulting sg overrun reported by Kent Overstreet, introduced with the last block pull. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't optimize for non-cloned bio in bio_get_last_bvec()
2016-03-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This fixes 3 FPU handling related bugs, an EFI boot crash and a runtime warning. The EFI fix arrived late but I didn't want to delay it to after v4.5 because the effects are pretty bad for the systems that are affected by it" [ Actually, I don't think the EFI fix really matters yet, because we haven't switched to the separate EFI page tables in mainline yet ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables x86/fpu: Fix eager-FPU handling on legacy FPU machines x86/delay: Avoid preemptible context checks in delay_mwaitx() x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off") x86/fpu: Fix 'no387' regression
2016-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target bug fix from Nicholas Bellinger: "Here is an outstanding target-core bug-fix for v4.5 code." This patch addresses a recent Task Management (TMR) regression related to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5. It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within ABORT_TASK failure path, once a se_cmd descriptor has already completed posting response to fabric driver logic, and must be skipped during normal ABORT_TASK se_cmd->tag lookup" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect ABORT_TASK put for completed commands
2016-03-12block: don't optimize for non-cloned bio in bio_get_last_bvec()Ming Lei
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1] because the start postion may have been moved in the middle of the bvec, such as splitting in the middle of bvec. Fixes: 7bcd79ac50d9(block: bio: introduce helpers to get the 1st and last bvec) Cc: stable@vger.kernel.org Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-12x86/efi: Fix boot crash by always mapping boot service regions into new EFI ↵Matt Fleming
page tables Some machines have EFI regions in page zero (physical address 0x00000000) and historically that region has been added to the e820 map via trim_bios_range(), and ultimately mapped into the kernel page tables. It was not mapped via efi_map_regions() as one would expect. Alexis reports that with the new separate EFI page tables some boot services regions, such as page zero, are not mapped. This triggers an oops during the SetVirtualAddressMap() runtime call. For the EFI boot services quirk on x86 we need to memblock_reserve() boot services regions until after SetVirtualAddressMap(). Doing that while respecting the ownership of regions that may have already been reserved by the kernel was the motivation behind this commit: 7d68dc3f1003 ("x86, efi: Do not reserve boot services regions within reserved areas") That patch was merged at a time when the EFI runtime virtual mappings were inserted into the kernel page tables as described above, and the trick of setting ->numpages (and hence the region size) to zero to track regions that should not be freed in efi_free_boot_services() meant that we never mapped those regions in efi_map_regions(). Instead we were relying solely on the existing kernel mappings. Now that we have separate page tables we need to make sure the EFI boot services regions are mapped correctly, even if someone else has already called memblock_reserve(). Instead of stashing a tag in ->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it generally makes no sense to mark a boot services region as required at runtime, it's pretty much guaranteed the firmware will not have already set this bit. For the record, the specific circumstances under which Alexis triggered this bug was that an EFI runtime driver on his machine was responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during SetVirtualAddressMap(). The event handler for this driver looks like this, sub rsp,0x28 lea rdx,[rip+0x2445] # 0xaa948720 mov ecx,0x4 call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720) mov r11,QWORD PTR [rip+0x2434] # 0xaa948720 xor eax,eax mov BYTE PTR [r11+0x1],0x1 add rsp,0x28 ret Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting instruction because ConvertPointer() was being called to convert the address 0x0000000000000000, which when converted is left unchanged and remains 0x0000000000000000. The output of the oops trace gave the impression of a standard NULL pointer dereference bug, but because we're accessing physical addresses during ConvertPointer(), it wasn't. EFI boot services code is stored at that address on Alexis' machine. Reported-by: Alexis Murzeau <amurzeau@gmail.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raphael Hertzog <hertzog@debian.org> Cc: Roger Shimizu <rogershimizu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-12x86/fpu: Fix eager-FPU handling on legacy FPU machinesBorislav Petkov
i486 derived cores like Intel Quark support only the very old, legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and our FPU code wasn't handling the saving and restoring there properly in the 'eagerfpu' case. So after we made eagerfpu the default for all CPU types: 58122bf1d856 x86/fpu: Default eagerfpu=on on all CPUs these old FPU designs broke. First, Andy Shevchenko reported a splat: WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160 which was us trying to execute FXRSTOR on those machines even though they don't support it. After taking care of that, Bryan O'Donoghue reported that a simple FPU test still failed because we weren't initializing the FPU state properly on those machines. Take care of all that. Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-11Merge tag 'for-linus-20160311' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "Late MTD fix for v4.5: - A simple error code handling fix for the NAND ECC test; this was a regression in v4.5-rc1 - A MAINTAINERS update, which might as well go in ASAP" * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd: MAINTAINERS: add a maintainer for the NAND subsystem mtd: nand: tests: fix regression introduced in mtd_nandectest
2016-03-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm/i915 fixes from Dave Airlie: "Just two i915 regression fixes, that should be it from me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Actually retry with bit-banging after GMBUS timeout drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
2016-03-11mm/mempool: avoid KASAN marking mempool poison checks as use-after-freeMatthew Dawson
When removing an element from the mempool, mark it as unpoisoned in KASAN before verifying its contents for SLUB/SLAB debugging. Otherwise KASAN will flag the reads checking the element use-after-free writes as use-after-free reads. Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-11Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Two more fixes for 4.5: - One is a fix for OMAP that is urgently needed to avoid DRA7xx chips from premature aging, by always keeping the Ethernet clock enabled. - The other solves a I/O memory layout issue on Armada, where SROM and PCI memory windows were conflicting in some configurations" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window ARM: dts: dra7: do not gate cpsw clock due to errata i877 ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
2016-03-11Merge tag 'media/v4.5-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "One last time fix: It adds a code that prevents some media tools like media-ctl to hide some entities that have their IDs out of the range expected by those apps" * tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media-device: map new functions into old types for legacy API
2016-03-11ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory windowThomas Petazzoni
When the Crypto SRAM mappings were added to the Device Tree files describing the Armada XP boards in commit c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards"), the fact that those mappings were overlaping with the PCIe memory aperture was overlooked. Due to this, we currently have for all Armada XP platforms a situation that looks like this: Memory mapping on Armada XP boards with internal registers at 0xf1000000: - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf8000000 -> 0xffe0000 126M PCIe memory aperture - 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE ! - 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE ! - 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture - 0xfff0000 -> 0xffffffff 1M BootROM The overlap means that when PCIe devices are added, depending on their memory window needs, they might or might not be mapped into the physical address space. Indeed, they will not be mapped if the area allocated in the PCIe memory aperture by the PCI core overlaps with one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB of PCIe memory will see its PCIe memory window allocated from 0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due to this, the PCIe window is not created, and any attempt to access the PCIe window makes the kernel explode: [ 3.302213] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143) [ 3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window [ 3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22 [ 3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018 This problem does not occur on Armada 370 boards, because we use the following memory mapping (for boards that have internal registers at 0xf1000000): - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK ! - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM Obviously, the solution is to align the location of the Crypto SRAM mappings of Armada XP to be similar with the ones on Armada 370, i.e have them between the "internal registers" area and the beginning of the PCIe aperture. However, we have a special case with the OpenBlocks AX3-4 platform, which has a 128 MB NOR flash. Currently, this NOR flash is mapped from 0xf0000000 to 0xf8000000. This is possible because on OpenBlocks AX3-4, the internal registers are not at 0xf1000000. And this explains why the Crypto SRAM mappings were not configured at the same place on Armada XP. Hence, the solution is two-fold: (1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from 0xe8000000 to 0xf0000000. This frees the 0xf0000000 -> 0xf80000000 space. (2) Move the Crypto SRAM mappings on Armada XP to be similar to Armada 370 (except of course that Armada XP has two Crypto SRAM and not one). After this patch, the memory mapping on Armada XP boards with registers at 0xf1 is: - 0x00000000 -> 0xf0000000 3.75G RAM - 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB) - 0xf1000000 -> 0xf1100000 1M internal registers - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1 - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM And the memory mapping for the special case of the OpenBlocks AX3-4 (internal registers at 0xd0000000, NOR of 128 MB): - 0x00000000 -> 0xc0000000 3G RAM - 0xd0000000 -> 0xd1000000 1M internal registers - 0xe800000 -> 0xf0000000 128M NOR flash - 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 - 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1 - 0xf8000000 -> 0xffe0000 126M PCIe memory - 0xffe00000 -> 0xfff00000 1M PCIe I/O - 0xfff0000 -> 0xffffffff 1M BootROM Fixes: c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards") Reported-by: Phil Sutter <phil@nwl.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-11Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Two fixes showed up in last few days, and they should be included in 4.5. Summary: Two more late fixes to drivers, nothing major here: - A memory leak fix in fsdma unmap the dma descriptors on freeup - A fix in xdmac driver for residue calculation of dma descriptor" * tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix residue computation dmaengine: fsldma: fix memory leak
2016-03-11Merge tag 'pm+acpi-4.5-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Two more fixes for issues introduced recently, one in the generic device properties framework and one in ACPICA. Specifics: - Revert a recent ACPICA commit that has been reverted upstream, because it caused problems to happen on user systems and the problem it attempted to address will not be relevant any more after upcoming ACPI specification changes (Bob Moore). - Fix crash in the generic device properties framework introduced by a recent change that forgot to check pointers against error values in addition to checking them against NULL (Heikki Krogerus)" * tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) ACPICA: Revert "Parser: Fix for SuperName method invocation"
2016-03-11Merge tag 'xfs-for-linus-4.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "This is a fix for a regression introduced in 4.5-rc1 by the new torn log write detection code. The regression only affects people moving a clean filesystem between machines/kernels of different architecture (such as changing between 32 bit and 64 bit kernels), but this is the recommended (and only!) safe way to migrate a filesystem between architectures so we really need to ensure it works. The changes are larger than I'd prefer right at the end of the release cycle, but the majority of the change is just factoring code to enable the detection of a clean log at the correct time to avoid this issue. Changes: - Only perform torn log write detection on dirty logs. This prevents failures being detected due to a clean filesystem being moved between machines or kernels of different architectures (e.g. 32 -> 64 bit, BE -> LE, etc). This fixes a regression introduced by the torn log write detection in 4.5-rc1" * tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: only run torn log write detection on dirty logs xfs: refactor in-core log state update to helper xfs: refactor unmount record detection into helper xfs: separate log head record discovery from verification
2016-03-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing breakage on recovery from failed rename() in jffs2" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jffs2: reduce the breakage on recovery from halfway failed rename() ncpfs: fix a braino in OOM handling in ncp_fill_cache()
2016-03-11Merge branches 'device-properties-fixes' and 'acpica-fixes'Rafael J. Wysocki
* device-properties-fixes: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) * acpica-fixes: ACPICA: Revert "Parser: Fix for SuperName method invocation"
2016-03-11drm/i915: Actually retry with bit-banging after GMBUS timeoutVille Syrjälä
After the GMBUS transfer times out, we set force_bit=1 and return -EAGAIN expecting the i2c core to call the .master_xfer hook again so that we will retry the same transfer via bit-banging. This is in case the gmbus hardware is somehow faulty. Unfortunately we left adapter->retries to 0, meaning the i2c core didn't actually do the retry. Let's tell the core we want one retry when we return -EAGAIN. Note that i2c-algo-bit also uses this retry count for some internal retries, so we'll end up increasing those a bit as well. Cc: Jani Nikula <jani.nikula@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8b1f165a4a8f64c28cf42d10e1f4d3b451dedc51) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-10MAINTAINERS: add a maintainer for the NAND subsystemBoris BREZILLON
Add myself as the maintainer of the NAND subsystem. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "A few simple fixes for ARM, x86, PPC and generic code. The x86 MMU fix is a bit larger because the surrounding code needed a cleanup, but nothing worrisome" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo kvm: cap halt polling at exactly halt_poll_ns KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS KVM: VMX: disable PEBS before a guest entry KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
2016-03-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I thought we were done for 4.5, but then the 64k-page chaps came crawling out of the woodwork. *sigh* The vmemmap fix I sent for -rc7 caused a regression with 64k pages and sparsemem and at some point during the release cycle the new hugetlb code using contiguous ptes started failing the libhugetlbfs tests with 64k pages enabled. So here are a couple of patches that fix the vmemmap alignment and disable the new hugetlb page sizes whilst a proper fix is being developed: - Temporarily disable huge pages built using contiguous ptes - Ensure vmemmap region is sufficiently aligned for sparsemem sections" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: partial revert of 66b3923a1a0f arm64: account for sparsemem section alignment when choosing vmemmap offset
2016-03-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes: - The fix for the page table corruption (CVE-2016-2143) - The diagnose statistics introduced a regression for the dasd diag driver - Boot crash on systems without the set-program-parameters facility" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: four page table levels vs. fork s390/cpumf: Fix lpp detection s390/dasd: fix diag 0x250 inline assembly
2016-03-10[media] media-device: map new functions into old types for legacy APIMauro Carvalho Chehab
The legacy media controller userspace API exposes entity types that carry both type and function information. The new API replaces the type with a function. It preserves backward compatibility by defining legacy functions for the existing types and using them in drivers. This works fine, as long as newer entity functions won't be added. Unfortunately, some tools, like media-ctl with --print-dot argument rely on the now legacy MEDIA_ENT_T_V4L2_SUBDEV and MEDIA_ENT_T_DEVNODE numeric ranges to identify what entities will be shown. Also, if the entity doesn't match those ranges, it will ignore the major/minor information on devnodes, and won't be getting the devnode name via udev or sysfs. As we're now adding devices outside the old range, the legacy ioctl needs to map the new entity functions into a type at the old range, or otherwise we'll have a regression. Detected on all released media-ctl versions (e. g. versions <= 1.10). Fix this by deriving the type from the function to emulate the legacy API if the function isn't in the legacy functions range. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-10dmaengine: at_xdmac: fix residue computationLudovic Desroches
When computing the residue we need two pieces of information: the current descriptor and the remaining data of the current descriptor. To get that information, we need to read consecutively two registers but we can't do it in an atomic way. For that reason, we have to check manually that current descriptor has not changed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Suggested-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reported-by: David Engraf <david.engraf@sysgo.com> Tested-by: David Engraf <david.engraf@sysgo.com> Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #4.1 and later Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-10x86/delay: Avoid preemptible context checks in delay_mwaitx()Borislav Petkov
We do use this_cpu_ptr(&cpu_tss) as a cacheline-aligned, seldomly accessed per-cpu var as the MONITORX target in delay_mwaitx(). However, when called in preemptible context, this_cpu_ptr -> smp_processor_id() -> debug_smp_processor_id() fires: BUG: using smp_processor_id() in preemptible [00000000] code: udevd/312 caller is delay_mwaitx+0x40/0xa0 But we don't care about that check - we only need cpu_tss as a MONITORX target and it doesn't really matter which CPU's var we're touching as we're going idle anyway. Fix that. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Huang Rui <ray.huang@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: spg_linux_kernel@amd.com Link: http://lkml.kernel.org/r/20160309205622.GG6564@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-10KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0Paolo Bonzini
KVM has special logic to handle pages with pte.u=1 and pte.w=0 when CR0.WP=1. These pages' SPTEs flip continuously between two states: U=1/W=0 (user and supervisor reads allowed, supervisor writes not allowed) and U=0/W=1 (supervisor reads and writes allowed, user writes not allowed). When SMEP is in effect, however, U=0 will enable kernel execution of this page. To avoid this, KVM also sets NX=1 in the shadow PTE together with U=0, making the two states U=1/W=0/NX=gpte.NX and U=0/W=1/NX=1. When guest EFER has the NX bit cleared, the reserved bit check thinks that the latter state is invalid; teach it that the smep_andnot_wp case will also use the NX bit of SPTEs. Cc: stable@vger.kernel.org Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.inel.com> Fixes: c258b62b264fdc469b6d3610a907708068145e3b Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-10KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 comboPaolo Bonzini
Yes, all of these are needed. :) This is admittedly a bit odd, but kvm-unit-tests access.flat tests this if you run it with "-cpu host" and of course ept=0. KVM runs the guest with CR0.WP=1, so it must handle supervisor writes specially when pte.u=1/pte.w=0/CR0.WP=0. Such writes cause a fault when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0. When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and restarts execution. This will still cause a user write to fault, while supervisor writes will succeed. User reads will fault spuriously now, and KVM will then flip U and W again in the SPTE (U=1, W=0). User reads will be enabled and supervisor writes disabled, going back to the originary situation where supervisor writes fault spuriously. When SMEP is in effect, however, U=0 will enable kernel execution of this page. To avoid this, KVM also sets NX=1 in the shadow PTE together with U=0. If the guest has not enabled NX, the result is a continuous stream of page faults due to the NX bit being reserved. The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER switch. (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry control, so they do not use user-return notifiers for EFER---if they did, EFER.NX would be forced to the same value as the host). There is another bug in the reserved bit check, which I've split to a separate patch for easier application to stable kernels. Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Fixes: f6577a5fa15d82217ca73c74cd2dcbc0f6c781dd Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-10x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")Yu-cheng Yu
Leonid Shatz noticed that the SDM interpretation of the following recent commit: 394db20ca240741 ("x86/fpu: Disable AVX when eagerfpu is off") ... is incorrect and that the original behavior of the FPU code was correct. Because AVX is not stated in CR0 TS bit description, it was mistakenly believed to be not supported for lazy context switch. This turns out to be false: Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers: 'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed by the new task.' Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception Specification: 'AVX instructions refer to exceptions by classes that include #NM "Device Not Available" exception for lazy context switch.' So revert the commit. Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-10s390/mm: four page table levels vs. forkMartin Schwidefsky
The fork of a process with four page table levels is broken since git commit 6252d702c5311ce9 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by: Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-09Merge tag 'spi-fix-v4.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes for the Rockchip and i.MX SPI controllers, especially for the i.MX they're annoying bugs if you run into them" * tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: fix spi resource leak with dma transfer spi: imx: allow only WML aligned transfers to use DMA spi: rockchip: add missing spi_master_put spi: rockchip: disable runtime pm when in err case
2016-03-10Merge remote-tracking branch 'spi/fix/rockchip' into spi-linusMark Brown
2016-03-10Merge remote-tracking branch 'spi/fix/imx' into spi-linusMark Brown
2016-03-09Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fix from Ted Ts'o: "This fixes a regression which crept in v4.5-rc5" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: iterate over buffer heads correctly in move_extent_per_page()
2016-03-09Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A few imx fixes I missed from a couple of weeks ago, they still aren't that big and fix some regression and a fail to boot problem. Other than that, a couple of regression fixes for radeon/amdgpu, one regression fix for vmwgfx and one regression fix for tda998x" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/radeon/pm: adjust display configuration after powerstate" drm/amdgpu/dp: add back special handling for NUTMEG drm/radeon/dp: add back special handling for NUTMEG drm/i2c: tda998x: Choose between atomic or non atomic dpms helper drm/vmwgfx: Add back ->detect() and ->fill_modes() drm/radeon: Fix error handling in radeon_flip_work_func. drm/amdgpu: Fix error handling in amdgpu_flip_work_func. drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats drm/imx: notify DRM core about CRTC vblank state gpu: ipu-v3: Reset IPU before activating IRQ gpu: ipu-v3: Do not bail out on missing optional port nodes
2016-03-09Merge tag 'trace-fixes-v4.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "I previously sent a fix that prevents all trace events from being called if the current cpu is offline. But I forgot that in 3.18, we added lockdep checks to test RCU usage even when the event is disabled. Although there cannot be any bug when a cpu is going offline, we now get false warnings triggered by the added checks of the event being disabled. I removed the check from the tracepoint code itself, and added it to the condition section (which is "1" for 'no condition'). This way the online cpu check will get checked in all the right locations" * tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix check for cpu online when event is disabled
2016-03-09ext4: iterate over buffer heads correctly in move_extent_per_page()Eryu Guan
In commit bcff24887d00 ("ext4: don't read blocks from disk after extents being swapped") bh is not updated correctly in the for loop and wrong data has been written to disk. generic/324 catches this on sub-page block size ext4. Fixes: bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped") Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dma-mapping: avoid oops when parameter cpu_addr is null mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers memremap: check pfn validity before passing to pfn_to_page() mm, thp: fix migration of PTE-mapped transparent huge pages dax: check return value of dax_radix_entry() ocfs2: fix return value from ocfs2_page_mkwrite() arm64: kasan: clear stale stack poison sched/kasan: remove stale KASAN poison after hotplug kasan: add functions to clear stack poison mm: fix mixed zone detection in devm_memremap_pages list: kill list_force_poison() mm: __delete_from_page_cache show Bad page if mapped mm/hugetlb: hugetlb_no_page: rate-limit warning message
2016-03-09dma-mapping: avoid oops when parameter cpu_addr is nullZhen Lei
To keep consistent with kfree, which tolerate ptr is NULL. We do this because sometimes we may use goto statement, so that success and failure case can share parts of the code. But unfortunately, dma_free_coherent called with parameter cpu_addr is null will cause oops, such as showed below: Unable to handle kernel paging request at virtual address ffffffc020d3b2b8 pgd = ffffffc083a61000 [ffffffc020d3b2b8] *pgd=0000000000000000, *pud=0000000000000000 CPU: 4 PID: 1489 Comm: malloc_dma_1 Tainted: G O 4.1.12 #1 Hardware name: ARM64 (DT) PC is at __dma_free_coherent.isra.10+0x74/0xc8 LR is at __dma_free+0x9c/0xb0 Process malloc_dma_1 (pid: 1489, stack limit = 0xffffffc0837fc020) [...] Call trace: __dma_free_coherent.isra.10+0x74/0xc8 __dma_free+0x9c/0xb0 malloc_dma+0x104/0x158 [dma_alloc_coherent_mtmalloc] kthread+0xec/0xfc Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlersJan Stancek
Replace ENOTSUPP with EOPNOTSUPP. If hugepages are not supported, this value is propagated to userspace. EOPNOTSUPP is part of uapi and is widely supported by libc libraries. It gives nicer message to user, rather than: # cat /proc/sys/vm/nr_hugepages cat: /proc/sys/vm/nr_hugepages: Unknown error 524 And also LTP's proc01 test was failing because this ret code (524) was unexpected: proc01 1 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages: errno=???(524): Unknown error 524 proc01 2 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages_mempolicy: errno=???(524): Unknown error 524 proc01 3 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_overcommit_hugepages: errno=???(524): Unknown error 524 Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09memremap: check pfn validity before passing to pfn_to_page()Ard Biesheuvel
In memremap's helper function try_ram_remap(), we dereference a struct page pointer that was derived from a PFN that is known to be covered by a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN, i.e., a PFN that has a struct page associated with it and is covered by the kernel direct mapping. However, the assumption that there is a 1:1 relation between the System RAM iomem region and the kernel direct mapping is not universally valid on all architectures, and on ARM and arm64, 'System RAM' may include regions for which pfn_valid() returns false. Generally speaking, both __va() and pfn_to_page() should only ever be called on PFNs/physical addresses for which pfn_valid() returns true, so add that check to try_ram_remap(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09mm, thp: fix migration of PTE-mapped transparent huge pagesKirill A. Shutemov
We don't have native support of THP migration, so we have to split huge page into small pages in order to migrate it to different node. This includes PTE-mapped huge pages. I made mistake in refcounting patchset: we don't actually split PTE-mapped huge page in queue_pages_pte_range(), if we step on head page. The result is that the head page is queued for migration, but none of tail pages: putting head page on queue takes pin on the page and any subsequent attempts of split_huge_pages() would fail and we skip queuing tail pages. unmap_and_move_huge_page() will eventually split the huge pages, but only one of 512 pages would get migrated. Let's fix the situation. Fixes: 248db92da13f2507 ("migrate_pages: try to split pages on queuing") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09dax: check return value of dax_radix_entry()Ross Zwisler
dax_pfn_mkwrite() previously wasn't checking the return value of the call to dax_radix_entry(), which was a mistake. Instead, capture this return value and return the appropriate VM_FAULT_ value. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-09ocfs2: fix return value from ocfs2_page_mkwrite()Jan Kara
ocfs2_page_mkwrite() could mistakenly return error code instead of mkwrite status value. Fix it. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>